iHome SMARTDESIGN iC16 Instruction Manual

Model iC16
Portable Alarm Clock Speaker
System for your Android
SMARTDESIGN
for android™
QUESTIONS? Visit www.ihomeaudio.com
Table of Contents
Controls and Indicators Quick Start iC16 Display Install Clock Backup Battery Using iC16 Charging your Android Listening to your Android Setting the Time Alarm Operation Snooze/Dimmer Operation A Consumer Guide to Product Safety Trouble Shooting Warranty Information
1 2 3 3
4 4
5 5
6
7
8 9
10
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as Benzine, thinner or similar materials can damage the surface of the unit.
NOTE: Be careful not to touch the surface of the speakers at either end of the unit
Getting Started
Thank you for purchasing the iHome iC16 Audio Speaker System for your Android. Designed specifi­cally to work with your Android device, this system provides high quality audio performance that brings out the best in your music. Please read this instruction book carefully before operating the iC16 and keep it for future reference.
Check for Android compatibility iC16 is an advanced system and supports most updated Android features. To make sure your Android
works properly with iC16, please update your firmware with the latest version.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Battery Warning
For models that use Lithium batteries
• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water,
fire, or high temperatures & not handled appropriately
• Do not place loose batteries in a pocket, purse, or other container containing metal objects, do not
mix with used or other battery types, or store with hazardous or combustible materials.
• Store in cool, dry, ventilated area.
• Follow applicable laws and regulations for transport and disposal.
For models that require more than one battery
• Do not mix with used or other battery types/brands
• Replace all batteries at the same time
• Do not open batteries
• Do not dispose of in fire
• Do not heat above 75˚C (167˚F)
• Do not expose contents to water
• Do not charge or recharge
• Do not install backwards
Button
+
Raise volume, Adjust clock/alarm time forward
_
Button
Lower volume, Adjust clock/alarm time backward
Power Button
Press to power unit ON or OFF
Alarm Button
Press and hold for Alarm Setting mode
Controls and Indicators
Top Panel
Clock Adj. Button
Press and hold for Clock Adjust mode
Snooze/Dimmer Button
Silence alarm temporarily or adjust display brightness
AC Adaptor Jack
Connect AC adaptor
Aux in
Connect audio device
Back Panel
DST On/Off button
Press to add or subtract 1 hour for daylight saving time or Standard time
1
USB Mode Switch
Switch to match device’s charging requirements
USB Charging Port
Charges attached device via USB when connected to AC power
Quick Start
RESET
RESET
TEST
TEST
2:Android1:power
Attach the AC adaptor cable to the AC adaptor jack on the back of the iC16 and plug the other end into a working wall socket. For portable operation, remove battery compartment door on the bottom of the unit and insert 4 AA batteries (see diagram on page 4).
3:time
Connect one end of the included stereo audio cable with 3.5 mm plugs to the headphone jack on your Android device and the other end to the aux in jack on the back of the unit. Press the Power Button on the iC16. Put your Android device in play mode. Press the + or – Button on the iC16 to adjust the system volume.
To set time
• Press the DST On/Off Button on the back of the unit as needed to add or subtract an hour for daylight saving time or standard time.
• Press & hold the Clock Adj. Button on the top of the unit until the hour display flashes.
• Press the + or - buttons to set the hour, then press the Clock Adj. button
• Press the + or - buttons to set the minutes
1
then press the Clock Adj. Button again to confirm time setting. 2 beeps will sound.
2
Loading...
+ 9 hidden pages