iHome IZA40 User Manual
AROMA DREAM
Model: iZA40
#TQOCVJGTCR['UUGPVKCN1KN&KHHWUGT
#NCTO%NQEMYKVJ5QWPF6JGTCR[
QUESTIONS? visit www.ihome.com or call 1-800-288-2792
WHAT’S INCLUDED:
RESET
RESET
TEST
TEST
1. iZA40 2. AC adapter
100% Pure Essential Oil
LAVENDER
5ml
3. remote
4. instructions 5. essential oil
CONNECTING THE UNIT
Connect the included AC adapter to the DC jack located on the bottom of the
unit and connect the other end to a working wall outlet. Remove the battery
pull tab from the bottom of the unit. Press Power to turn the unit ON.
Always place unit on a firm, flat, stable surface. If water accidentally enters the
air outlet, it may drain from the bottom of the unit. We recommend placing a
waterproof mat or pad under the unit to protect your furniture.
RESET
RESET
TEST
TEST
1
FEATURES & FUNCTIONS
REMOTE CONTROL
4'565106121(70+6
Alarm 2Alarm 1
AromatherapySound Therapy
Power/
Alarm
Reset
Sound Timer
Control Settings
DISPLAY
PM Indicator
Low Backup
Battery Indicator
Low Water Indicator
(aroma will shut o when tank is empty)
Volume +/-
Snooze &
Display Dimmer
Aroma Timer
Programmable
Therapy Presets
Alarm 1
Indicator
Alarm 2
Indicator
BACK & BOTTOM
push in corner to unlock
Aroma Sound Time Set Alarm 1
Volume -/+
Control Settings
DST Switch
(Daylight Savings)
Battery Backup
(remove pull tab before use)
DC Jack
(24v/1000mA)
Alarm 2
USB Charging Port (1A)
2
SETTING THE TIME
1. Press and hold the Time Set Button located on the back of the unit
f
or 2 seconds until the clock display flashes and a beep sounds.
Press the – or + Buttons to adjust the clock to the curr
2.
or rapid setting). Make sure you set the correct AM/PM time. T
f
indicat
To toggle the clock display between standard 12 hour time and 24
3.
(“military”) time displa
the display is flashing during time setting.
4.
Press and release the Time Set Button to confirm the curr
setting. T
to set the correct year.
5.
Press and release the Time Set Button to confirm the current y
setting. T
set the correct month and day (hold for rapid adjustment).
6.
Press and release the Time Set Button to confirm the current date
setting. 2 beeps will sound to indicate time setting mode is complete.
or appears to the left of the display; there is no AM indicator.
y, press the Alarm or Alarm Button
he YEAR will flash on the display. Press the – or + Buttons
he Date will flash on the display. Press the – or + Buttons to
ent time (hold
he PM
hour
while
ent time
ear
Note: To toggle the clock display between 12 and 24 hour (military) time,
press any Alarm Button while the display is flashing during time setting.
DAYLIGHT SAVINGS (DST) SWITCH
This unit has a DST switch on the bottom of the unit to adjust the time
for daylight saving time and standard time. By default, it is set to Auto
and will automatically adjust the time at the start and end of daylight
saving time.
If you wish to adjust manually, slide the switch to +1 to add one hour
or to –1 to subtract an hour.
3
Loading...