Ihome IP10 User Manual

Model iP10
stereo alarm clock to charge
your iPod or iPhone
QUESTIONS? Visit www.ihomeaudio.com
WELCOME
Thank you for choosing the iP10 from iHome. This user guide will get
you up and running quickly and provide helpful hints to maximize
enjoyment. For more information about this and other iHome
products, please visit www.ihomeaudio.com Note that details on
using iHome apps with this unit are not covered in this booklet. For
information on using iHome apps, please visit
www.ihomeaudio.com/apps
GETTING STARTED
This unit ships with the following items. Please check to see that all
items are present.
1 iP10 speaker system
2 100-240V Universal AC power adaptor
1
2
1
FEATURES & FUNCTIONS
Top panel
Dock
Time Sync button
Power On/Off
button
Snooze/Dimmer button
Back panel
Display
Volume Indicator
PM Indicator
DC Jack
Back rest
Time Display
Sleep button
Alarm button
Settings/ Volume Control buttons
Alarm Indicator
iPod Indicator
WAKE-TO Indicator (iPod/Buzzer)
Sleep Indicator
Low Backup Battery Indicator
2
CONNECTING TO AC POWER
This unit operates on AC power
using the included 100V-240V
universal AC adaptor for charging
and playing your iPhone or iPod .
RESET
Place unit on a stable surface. Plug
the power adaptor into the DC jack
RESET
TEST
TEST
7.5V 2.5A
on back of the unit and the other
end into a working wall socket. You
can now charge your iPhone or
iPod.
BACKUP BATTERY
The iP10 ships with a CR2450 battery installed for backup to provide
continuous alarm operation and clock settings in the event of a power failure.
Remove the pull tab from the battery compartment on the bottom of the unit
before use. If a power failure occurs or the AC cord is accidentally
disconnected, the display backlight will not remain lit, but current time and
alarm time settings will be temporarily maintained. Otherwise, you must reset
the time and alarm settings.
Note: The Battery Low icon is located at the right side of clock display.
When the backup battery is low and needs to be replaced, the Battery
Low icon will flash. To replace, follow steps below:
3
Loading...
+ 9 hidden pages