iHome IH-H412US, IH-H411UP, IH-H410UR, IH-H413UN User Manual

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction guide, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the •

receiver. Connect the equipment into an outlet on a circuit different •

from that to which the receiver is connected. Consult a service representative for help.•

Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. LifeWorks is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modications to this equipment. Unauthorized changes or modications could void the user’s authority to operate the equipment.

Responsible party: LifeWorks Technology Group LLC

1412 Broadway, New York, NY 10018

Tested To Comply With FCC Standards FOR HOME OR OFFICE USE

Warning Improper setup, use and care of this product can

increase the risk of serious injury, death or device damage. Read and keep this guide and all other printed guides for future reference. For updated guides or replacements, go to www.life-works.com

Do Not Attempt Repairs Do not attempt to take apart,

open, repair, service or modify the device(s). Doing so may risk of electric shock or other hazard. Evidence of any attempt to open or modify the device, including any peeling, puncture or removal of labels, will void the Limited Lifetime Warranty.

Printed in China © 2008 LifeWorks Technology Group LLC. iHome™ is a trademark of SDI Technologies Inc. used under license. Windows Vista Mac All other brands and logos are trademarks of their respective companies.

is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

is a trademark of Apple Inc., registered in the U.S. and other countries.

Headset Warning

Extended exposure to high volumes may result in temporary or permanent hearing loss.

technical support

for technical support please visit

www.life-works.com

or call (877) LIFE-540 (877-543-3540)

document version number 0811-0

lifetime warranty

for warranty information, please visit

www.life-works.com/warranty

for model number(s) IH-H410UR IH-H411UP IH-H412US IH-H413UN

IH-H410UR IH-H411UP IH-H412US IH-H413UN

USB foldable headset

quick start guide

Congratulations on the purchase of your new LifeTalks USB foldable headset. This product comes with a limited lifetime warranty.

Before using your product, please thoroughly read and follow the instructions inside this guide.

If you still need help, see the back page for other support options. If you want to know more about our products, visit us online at

www.life-works.com.

system requirements

Windows• Windows Vista or Mac

USB port (for digital audio) • or

3.5 mm (1/8”) headphone output and microphone input

2000, XP or

OS X v10.4 or later

LifeTalks™

setup

quick sta r t gu ide

microphone mute button

VOLUME

MIC

MUTE

volume control

microphone mute switch

connect to computer for analog sound

connect

through

USB adapter

for digital sound

fold headset for storage and traveling

noise canceling

microphone

adjustable

boom

4•

start using your new headset!

1•

2•

verify package contents

quick start guide

(in your hands right now)

connect headset to computer

USB audio adapter

LifeTalks USB foldable headset

If you use the USB audio adapter and your computer does not automatically recognize it, see Troubleshooting.

3•

adjust headset and microphone volume

You can adjust the headset volume from your computer or with the volume control on the headset cable. You can also adjust the microphone volume on your computer.

Mute the microphone by pressing the microphone mute button on the USB audio adapter or using the switch on the headset cable. You can also mute the microphone using the volume controls on your computer.

To adjust the volume on your computer: Windows XP: Click the volume icon in the system tray. You can also adjust the volume by clicking Start > Control Panel > Sounds, Speech,

and Audio Devices.

Windows Vista: Click the volume icon in the system tray. You can also adjust the volume by clicking Start > Control Panel > Hardware and

Sound, then clicking Adjust system volume under Sound.

Mac OS X: Click the volume icon on the menu bar. You can also adjust the volume by clicking the Apple menu, selecting System

Preferences, then clicking Sound.

troubleshooting

situation try this

cannot hear

audio

microphone

does not

work

headset

does not

work

computer

does not

recogize

device

Ensure the green headphone connector is inserted properly into the • headphone output.

Ensure mute is off on the computer, the USB audio adapter and the • volume control on the headset cable. Adjust the output volume on the computer and the volume control on the headset.

Ensure the pink microphone connector is inserted properly into the • microphone input.

Ensure mute is off on the computer, the USB audio adapter and the • volume control on the headset. Adjust the microphone volume on the computer.

Check that the USB audio adapter is connected to the computer.• Try a different USB port.• Try plugging the USB audio adapter into a USB port on the computer, •

not a USB hub.

Windows XP: • Go to Start > Control Panel > Sounds, Speech and Audio Devices > Sounds. Click Sounds and Audio Devices. Click the Audio tab, then

select C-Media USB Headphone Set as the default device for sound playback and recording. Click OK.

Windows Vista: •

Go to Start > Control Panel > Hardware and Sound > Sound. Choose the Playback tab, then choose C-Media USB Headphone Set. Click Set Default. Next, select the Recording tab, then select C-Media USB Headphone Set. Click Set Default. Click OK.

Mac OS X: •

Click the Apple menu and select System Preferences, then click Sound. Select the Output tab, then select C-Media USB Headphone Set. Next, click the Input tab and select C-Media USB Headphone Set.