FCC Statement
This device complies with part 15 of FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to part 15 of FCC Rules. These limits are designed
to provide reasonable protection against harmful interference
when the equipment is operated in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instruction guide, may cause harmful interference
to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and the •
receiver.
Connect the equipment into an outlet on a circuit different •
from that to which the receiver is connected.
Consult a service representative for help.•
Properly shielded and grounded cables and connectors must
be used in order to comply with FCC emission limits. LifeWorks
is not responsible for any radio or television interference
caused by using other than recommended cables and
connectors or by unauthorized changes or modications to this
equipment. Unauthorized changes or modications could void
the user’s authority to operate the equipment.
Responsible party:
LifeWorks Technology Group LLC
1412 Broadway, New York, NY 10018
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
Warning Improper setup, use and care of this product can
increase the risk of serious injury, death or device damage.
Read and keep this guide and all other printed guides for future
reference. For updated guides or replacements, go to
www.life-works.com
Do Not Attempt Repairs Do not attempt to take apart,
open, repair, service or modify the device(s). Doing so may
risk electric shock or other hazard. Evidence of any attempt to
open or modify the device, including any peeling, puncture or
removal of labels, will void the Limited Lifetime Warranty.
Printed in China
© 2008 LifeWorks Technology Group LLC.
iHome™ is a trademark of SDI Technologies Inc. used under license.
Windows Vista
Mac
All other brands and logos are trademarks of their respective companies.
®
is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
®
is a trademark of Apple Inc., registered in the U.S. and other countries.
technical support
for technical support please visit
www.life-works.com
or call (877) LIFE-540 (877-543-3540)
document version number 0811-0
lifetime warranty
for warranty information, please visit
www.life-works.com/warranty
for model number(s)
IH-A700CB IH-A701CW
notebook cooling pad
with 2 built-in fans
quick start guide
Congratulations on the purchase of your new
notebook cooling pad with 2 built-in fans.
This product comes with a limited lifetime warranty.
Before using your product, please thoroughly read and follow the
instructions inside this guide.
If you still need help, see the back page for other support options.
If you want to know more about our products, visit us online at
www.life-works.com.
system requirements
®
Windows•
Windows Vista
or
Mac
USB port•
2000, XP or
®
OS X v10.4 or later
IH-A700CB
IH-A701CW
®
setup
cable storage
compartment
adjustable feet
adjust feet
to change angle
ON OFF
DC
5V
connect to
cooling pad
connect to a
USB port on
your computer
3•
connect USB power cable
1•
2•
verify package contents
notebook cooling pad
USB power cable
quick start guide
(in your hands right now)
slide sides of cooling pad out to t notebook and place pad under
notebook
4•
turn on cooling pad
troubleshooting
situation try this
cooling pad
does not
work
Ensure the cable is connected properly.•
Ensure the computer is on.•
Ensure the cooling pad power is on.•