Ihome IBT78 User Manual

Model: iBT78

Color Changing Rechargeable

Bluetooth Speaker

with Speakerphone

CHARGE

BEFORE

USE

instruction manual

iBT78

Introduction

Thank you for purchasing the iHome iBT78. This product is designed to
provide high quality wireless sound for your iPad, iPhone, iPod, computer,
PDA or other Bluetooth audio device.

This instruction booklet explains the basic operation and care of the unit.
Please read them carefully and keep for future reference.

Maintenance

• Place the unit on a level surface away from sources of direct sunlight or
excessive heat.

• Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as benzene, thinner or similar materials
can damage the surface of the unit.

1

What’s Included

• iBT78 speaker

• Micro USB to USB charging cable

• Carry strap

iBT78

iBT78 speaker

Carry strap

Micro USB to USB
charging cable

2

Meet Your iBT78

iBT78

Top

Red Charging

Status Indicator

Light

Bluetooth

Button

Blue Bluetooth Status
Indicator Light
(green for wireless stereo)

Bottom

FCC ID: EMOiBT78 IC: 986B-iBT78

Charging Voltage:

Service Number:

Patents: www.ihome.com/patents

Manufactured and Serviced by

SDI Technologies Inc.

Designed in the USA

Carry Strap

Back

Channel

iBT78

DC 5V, 500mA
iBT78-A-A

Toll Free: 1-800-288-2792

www.ihome.com
Made in China

o on

USB Charging

in Port

Front

Microphone

Power On/O
Switch

Color Mode Button
(press and hold for

Battery Review)

Aux-in

Jack

Lower/Raise Volume
Buttons

3

iBT78

Getting Started: Carry Strap

The iBT78 has a channel above the controls to
attach the included carry strap. To attach the
carry strap, form a small loop in one end of the
carry strap. Insert this loop through the desired
channel, then pull the loop back through the
larger loop formed in the carry strap to tighten.

Charging the Unit

CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING

1. Connect the micro USB plug on the included charging cable to the micro

USB Charging in Port on the back of the unit.

2. Connect the standard USB plug end of the cable to a USB AC adapter

connected to a working outlet or to another USB charging source. For
first time use, charge unit for about 4 hours. The status indicator LED
on top of the unit flashes red while charging and turns o once unit is
fully charged. When charge level is low, it will also flash red when not
connected to charging source.

Charge via USB AC adapter or other powered USB port

iHome iBT78 USB charge in port

USB AC adapter
(not included)

USB AC adapter
connected to working outlet

4