iHome iBT74 User manual

instruction manual

w

Model: iBT74

Color Changing Rechargeable

Bluetooth Speaker
with Speakerphone

CHARGE

BEFORE

USE

Introduction

w

Thank you for purchasing the iHome iBT74. This product is designed to provide high quality wireless
sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
This instruction booklet explains the basic operation and care of the unit. Please read them carefully and
keep for future reference.

Maintenance

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other
protective material should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as benzene, thinner or similar materials can damage the surface of the unit.

What’s Included

• iBT74 speaker

• Combination micro USB to USB charging cable/audio in cable

• carry strap

iBT74 carry strap

Combination

micro USB to USB cable/audio cable

1

Meet Your iBT74

Top

Bottom

off o

Charging/Bluetooth
Status Indicator Light

Carry Strap Channel

(lantern mode)

Power On/Off Switch

Front

Back

Carry Strap Channel

Bluetooth/

Speakerphone

Button

Color Mode Button
(press and hold for

2

Battery Review)

Microphone

Charging/

Aux-in

USB port

iBT74

Lower/Raise
Volume Buttons

Getting Started: Carry Strap

The iBT74 has two channels to attach the included carry strap,
one on the bottom to hang the unit like a lantern, and one on the lower
back of the unit. To attach the carry strap, form a small loop in one end of the
carry strap. Insert this loop through the desired channel, then pull the
loop back through the larger loop formed in the carry strap to tighten.

OR

Charging the Unit

CHARGE UNIT BEFORE USE/KEEP UNIT OFF FOR FASTER CHARGING

1. Connect the micro USB plug on the included combination cable to
the micro USB Charging/Aux-in USB Port on the side of the unit.

2. Connect the standard USB plug end of the cable to a power USB port on a computer, a USB AC
adaptor or other USB charging device. For first time use, charge unit for about 4 hours. The status
indicator LED on top of the unit turns solid red while charging and turns off once unit is fully charged.

Charge via computer USB port, USB AC adaptor or other powered USB port

Computer
connected to
working outlet

Computer USB port

iHome iBT74 USB port

USB AC adaptor
connected to working outlet

3

USB AC adaptor
(not included)

iHome iBT74 USB port