iHome iBT52 User Manual

iBT52

Portable USB

Bluetooth Receiver

Instruction manual

Introduction

Thank you for purchasing the iHome iBT52. This product is designed to provide
high quality wireless sound and speakerphone capability to audio devices
equipped with line-in jacks, and to headphones.

Along with the included Quick Bluetooth Connection Guide this instruction booklet
explains the basic operation and care of the unit. Please read them carefully and
keep for future reference.

Maintenance

• Keep unit away from sources of excessive heat.

• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as thinner or similar materials can damage the
surface of the unit.

Incl

uded

• iBT52 Bluetooth receiver system

(Bluetooth Receiver + docking station with USB + audio cable)

• iBT52 Home Docking Station (with attached Aux + Micro USB cable)

• USB Wall Adaptor

• 3.5mm to RCA cable adapter

Meet Your iBT52

iBT52 Home Docking Station

Micro USB
Plug

iBT52 Bluetooth Receiver

FrontSide

Audio Plug

Top

Micro USB Charging Port Aux-out Jack

Side

Sport Clip

o

/

on

Front

Microphone

Backlit Pairing/Operation
Button with Indicator Light

Powering and Charging the Unit

Using the USB Wall Adaptor

1. Gently connect the Bluetooth Receiver to the Docking Station’s micro USB plug

and audio plug by sliding the Receiver onto the plugs.

2. Connect the standard USB plug of the Docking Station into the USB Wall

Adaptor.

3. Plug the USB Wall Adaptor into a working wall outlet. For first time use, charge

unit for about 3 hours.

Using other USB Power Source

1. Gently but firmly connect the Bluetooth Receiver to the Docking Station’s micro

USB plug and audio plug by lining up the sport clip with the groove on the
Docking Station and sliding the Receiver onto the plugs.

2. Connect the standard USB plug of the Docking Station into a power USB port

on a computer or other USB charging device. For first time use, charge unit for
about 3 hours.

The Button/Indicator Light on the front of the Bluetooth Receiver glows red
steadily while the unit is charging and turns OFF once the unit is fully charged.
If unit is not powered on and is connected to USB power, the red light glows
steadily to indicate unit is charging.

Using the USB Wall Adaptor Using the USB Power Source

to speaker

NOTE: When the unit is on and not connected to a power source, the Button/
Indicator Light flashing red means the battery needs charging.

to speaker

USB 2.0