IGo Direct Bluetooth Keyboard User Manual

www.igo.com
iGo™ Stowaway® Ultra-Slim
®
Owner’s Manual
Symbian UIQ Mobile Devices
Keyboard
for
Keyboard Driver:
1.21
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 1
Setting up the Keyboard .................................................3
Before You Begin....................................................................................3
Installing the Software............................................................................3
Configuring the Keyboard to your Device.....................4
Secure Connections ...............................................................................4
Unsecure Connections...........................................................................7
Other Features ........................................................................................7
Reconnecting the Stowaway keyboard.......................10
Automatic Reconnection from Waiting Mode ....................................11
Customizing Your Bluetooth Keyboard.......................12
Keyboard Control Panel.......................................................................12
Disabling the Stowaway Bluetooth keyboard ....................................13
Secure Connection Overview ..............................................................13
Keyboard Status Light ..........................................................................14
Using the Stowaway keyboard.....................................15
Character Input .....................................................................................15
Moving the Caret/Selecting Text..........................................................15
Menu and Toolbar Navigation..............................................................15
Launching and Navigating Applications.............................................16
Character Input .....................................................................................16
International and Extended Character Set..........................................17
Frequently Asked Questions........................................18
Legal Notices..................................................................19
Trademarks............................................................................................19
Warranty ................................................................................................20
Important Battery Information .............................................................22
Important Notes about Bluetooth Devices..........................................23
Regulatory Notices...............................................................................23
Features and Specifications Summary........................30
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 2

Setting up the Keyboard

Before You Begin

Before you install the Stowaway keyboard software for Symbian UIQ mobile devices:
¾ Disable or remove any other keyboard applications that you have
previously installed on your mobile device. (Refer to the User’s
Guide included with your mobile device for instruction on how to do this.)
¾ Ensure there is at least 250 KB of memory on your mobile device. ¾ Insert the 2 AAA batteries (included) beneath the battery cover of the
Stowaway keyboard.

Installing the Software

The keyboard application can be installed from the accompanying CD or if your device has internet access it can be downloaded directly by browsing to the website: www.thinkoutside.com. The website will automatically detect the type of device and offer the correct driver for download. After installation, the keyboard driver icon will appear in the Applications list.
NOTE: Be sure to install the driver to Phone Memory.
Method 1: Sync a connection between the computer and your Symbian UIQ
mobile device using the phone’s sync cable.
A. Insert the CD-ROM into the CD-ROM drive on your PC. Click on the
buttons: Stowaway > Symbian > UIQ > English > Keyboard Driver.
B. If necessary, launch the .SIS file to begin installation.
Method 2: Launch the installation from a Flash Memory card.
A. Transfer the .SIS file to a memory card. B. Launch the .SIS file to begin installation.
Method 3: Beam the driver via Infrared or Bluetooth.
A. Right click the .SIS file. B. Select Send To Bluetooth device and find your device in the list. C. Keyboard driver will appear in the phone’s Inbox. D. When prompted select Yes then Install.
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 3

Configuring the Keyboard to your Device

NOTE: The Bluetooth connection between the mobile device and keyboard must be set up through the Stowaway keyboard driver.
1. The main screen of the Stowaway keyboard application is the Status screen. The Status window gives you the keyboard connection status, battery and firmware information. The Options tab gives you access to the Bluetooth Security settings. The other keyboard options are available via the other application tabs.

SECURE CONNECTIONS

1. A Secure connection requires authentication by entering the same passkey (passcode) on the mobile device and then on the keyboard. A Secure connection allows automatic reconnection and offers protection against eavesdropping by other Bluetooth devices. You will find the Bluetooth security setting on the Options tab.
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 4
2. The status tab offers buttons to enable or disable your keyboard. To enable the Stowaway keyboard, make sure the keyboard is Discoverable by the mobile device. Press the <Ctrl> <Left Fn> <Right Fn> keys together until the green LED (above the <T> key) flashes once per second.
3. After you tap Enable BT, the Stowaway keyboard application will enable the Bluetooth system software (Bluetooth Stack) on your mobile device, and will begin searching for the keyboard.
4. You will be prompted for a Passkey. You may see this Bluetooth Passkey dialog box, but this may vary by device. Enter a Passkey of your own choosing (of 1-9 digits), using the on screen keyboard.
NOTE: The Passkey must contain only digits, for example 12345.
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 5
5. Next, type the same Passkey number on the Stowaway keyboard. When finished, press the <Enter> key on your keyboard.
6. If the Passkey is entered successfully on both devices, the message BT Keyboard Connected will appear. If the keyboard does not show up as connected:
a. Press the Discoverable button again. b. Or, power cycle the keyboard (close
and reopen), then press <Ctrl> <Left Fn> <Right Fn>.
c. Or, check that the Red LED on the
keyboard is not lit after a power cycle, indicating a dead battery.
7. If the passkey is not entered correctly, the connection will fail. In this case you will need to repeat steps 3-5 from above.
NOTE: Please, make sure that the passkey is entered on your mobile device first, tap Done (twice), and then follow with the passkey on the keyboard. When finished, press the <Enter> key on the keyboard.
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 6

UNSECURE CONNECTIONS

1. If you chose an Unsecured connection by removing the check mark at Options > Bluetooth Security option, connection is usually established within a few seconds after pressing <Ctrl> <Left Fn> <Right
Fn>. If the connection is not completed,
press the <Ctrl> <Left Fn> <Right Fn> keys together again.

OTHER FEATURES

1. If several Stowaway keyboards happen to be nearby and in Discoverable mode, the scan will display all of these devices in a list. Compare the keyboard ID (Bluetooth address) printed on the back of the keyboard with the IDs in the list and select the desired keyboard to connect to.
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 7
2. When the Stowaway keyboard is enabled, the Status window shows the connection status, the battery state, and firmware version for the keyboard. The three states of the battery are:
a. Normal – This is the most common
state of the battery.
b. Low – This is a warning that the
batteries have reached a threshold where they should be replaced soon.
c. Critical – This means the batteries
are in imminent danger of reaching a point where they will no longer function.
NOTE: If the keyboard batteries reach a low or critical state, a message will be displayed, and you may be warned that the keyboard is being disabled to save power.
2. After the Stowaway keyboard is enabled, you can test the connection by typing on the keyboard. Text will display in the text box provided on the Status tab.
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 8
3. The Keys tab allows you to remap the default application launch “Hot Keys” available in the driver <Left Fn> + <letter> (row two keys), as well as assign applications or files to open with the <Alt> + <Left Fn> + <letter> (row one 1-0 keys).
4. About tab – Provides the version of the Stowaway software installed on your mobile device.
5. Help – Application help is available from the Stowaway Keyboard menu > Help option.
Stowaway Ultra-Slim Owner’s Manual for Symbian UIQ
Page 9
Loading...
+ 21 hidden pages