iGo ps002720001 User Manual

power splitter

Specifications

Input Voltage: 5.85 VDC Input Current: 0-0.85A Output Power: 4.2W shared between

both outputs

Package Contents

• Power splitter unit

• User Guide

Tel: 1-480-596-0061, 1-888-205-0093

www.iGo.com

charger.all your gadgets. simply switch the tip. is a

trademark of Mobility Electronics, Inc. All other brand

names and logosare trademarks of their respective owners.

Specifications are subject to changewithout notice.

Protected under one or more of the following patents:

5,347,211; 6,064,177; 6,643,158; 6,650,560; 6,700,808;

6,751,109; 6,775,163; 6,791,853; 6,920,056; 6,937,490 and

6,976,885. Other United States and foreign patents pending.

Made in China. P/N 8040350-01 Rev. C

For use with:

User Guide

Congratulations on your iGo®power purchase! Universally compatible with today's popular brands, the iGo power splitter accessory allows you to use select iGo chargers to charge two gadgets simultaneously such as a mobile phone and MP3 player or a smartphone and Bluetooth headset, GPS devices and more (iGo chargers and power tips sold separately). It's simple! Just plug into a compatible iGo charger and use the appropriate power tips for each of your gadgets. No other solutions are as powerful or as versatile as the iGo line of power products.

For additional compatibility information and to purchase iGo power tips, visit www.iGo.com.

Works with select iGo chargers including:

iGo

everywhere iGo iGo

iGo

everywhere15

iGo

auto15 elite

iGo dualpower

(sold separately)

auto

wall

accessory

Quick Connect Guide

IMPORTANT NOTICES

Please read the following carefully before using the iGo®power splitter.

When using iGo power splitter to charge two devices, the maximum power output of your iGo charger is shared between both devices. Most individual devices and combinations of devices should charge. However, if a device attached to iGo power splitter is not charging or is displaying an abnormal charging indication, it may need more power than can be delivered at that particular time. If this occurs, try one or more of the following:

1. Turn off the device(s)

2. Detach one of the devices

3. If the problem persists, remove the splitter and connect your device and the appropriate tip directly to your iGo charger.

Note: The iGo power splitter may not support devices that have completely dead batteries. These types of devices may need to charge alone before attempting to share power or may need to charge in the “off” state while sharing power.

COMPATIBILITY

The following iGo power tips will not work with iGo power splitter:A06, A07, A08,A15,A17; A01 Rev. 01 and A61 Rev. 01. Check the label on your tip to verify.

iGo

chargers

(sold separately)

iGo®power tips

(sold separately)