iGo ps001240012 User Manual

www.iGo.com

Specifications

AC input: 100-240 VAC; 50/60 Hz

Unit dimensions: 3.0 x 5.6 x 0.9”

(78.3 x 141.0 x 23.4mm)

Safety Features

Over-voltage protection

Over-current limit

Over-temperature protection

Short circuit protection

Surge protection

Before installing, please read this important
safety information. Proper care of your adapter
will ensure its optimal performance.

1. Never pull on the adapter cords. Always hold the plug when
inserting or removing it.

2. Select the correct tip for your notebook by reviewing the
attached tip compatibility hang tag or going to
www.iGo.com – using the wrong tip may damage your
computer or cause it to malfunction.

3. Unplug iGo wallMAX from the power outlet each time you
attach a new tip to the cable.

4. Keep the adapter away from heat sources (such as electric
heaters) and avoid direct sunlight exposure.

5. For indoor use only. Keep the adapter free of dust and
moisture, and avoid exposure to corrosive chemicals (such
as cleaning fluids).

6. Do not drop the adapter or subject it to undue shock.

7. Do not place anything on top of the adapter while in use.

8. Turn off the computer and unplug the adapter if you smell
something burning or if the adapter becomes overly hot.

9. Do not attempt to disassemble the adapter. It has no
serviceable or replaceable parts inside. Voltage in the adapter
can cause injury. If the adapter malfunctions, immediately
discontinue use and contact iGo Technical Support.

10. Always use the appropriate cables and connectors supplied
with your adapter as shown in this User Guide. Use of
cables, connectors or other accessories not supplied with
your product may result in injury or damage to your device.

Issue Probable Cause(s) Possible Solution(s)

Notebook is No input or output Check plug connector

not charging power Check cable connections

Check outlet circuit

breaker

LED does No electricity to unit See above solutions

not light

LED does not Light burned out Contact iGo customer

light but unit appears service (see contact

to power devices information on the

back of this guide)

Notebook not listed Compatibility is See www.iGo.com for

on enclosed always changing current compatibility

compatibility chart information

Device is Tip not installed on Install tip on Notebook

not charging Notebook Input Cord Input Cord

when iGo dualpower

is configured

User Guide

iGo Tip Technology

iGo power products deliver the precise amount of power
to each device through the use of interchangeable tips.

Using iGo power products with patented tip technology
eliminates concern about the correct amount of power for
your device or trying to select it yourself as you do with other
products—we do it for you! The attached compatibility hang tag
will help you determine which tip you need for your notebook.
Simply attach the correct tip and get powered up and
connected

TM

. If your notebook tip is not included in this
package, visit www.iGo.com to locate additional tips for
purchase. WARNING – Using the wrong tip may damage your
device or cause it to malfunction.

Power Your Mobile Phones, Smartphones/PDAs,
MP3 Players, Digital Cameras...

So, you would like to power and charge an additional portable
electronic device? Great! wallMAX does that, too. All you need
is the included iGo dualpower

®

accessory and the appropriate
tip to simultaneously power/charge two electronic devices
(additional tips sold separately).

Canada Compliance

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numériqué de la classe B est conformé à la norme
NMB-003 du Canada.

Environmental Requirements

Ambient operating temperature is 0ºC to 40ºC
Storage temperature is -40ºC to 85ºC

Product Support

We are committed to providing our customers with
first-class customer service and product support.
You can receive help in a variety of ways:

Sales/Customer Service: 1-888-205-0093

Technical Support: 1-800-474-7593

Web: www.iGo.com

Product Registration

Thank you for purchasing one of iGo’s mobile solutions. Help us

serve you better by taking a moment to register your product at

www.iGo.com/registration. Failure to register does not diminish

your warranty rights.

Warranty

2-year limited warranty

Package Contents

iGo notebook power adapter with input cord

iGo dualpower

®

accessory

Wall outlet cord (AC)

Carrying case

Notebook tips (See attached hang tag for corresponding models

and tips)

User Guide

Compatibility hang tag

Troubleshooting

© 2002-2007 Mobility Electronics, Inc. Mobility Electronics, iGo and iGo dualpower
are registered trademarks and powered up and connected is a trademark of Mobility
Electronics, Inc. All other brand names and logos are trademarks or registered
trademarks of their respective owners. Specifications are subject to change without
notice. Protected by one or more of the following patents: 5,347,211, 6,064,177,
6,700,808, 6,643,158, 6,650,560, 6,751,109, 6,775,163, 6,791,853, 6,920,056, 6,937,490
and 6,976,885. Other United States and foreign patents pending. Made in China.
P/N 8040430-01 Rev.A

Mobility Electronics Inc.

17800 North Perimeter Drive, Ste. 200, Scottsdale, AZ 85255 USA

Tel: [phone]; Fax: [phone]

Congratulations on your iGo

®

power purchase!

Universally compatible with today’s popular brands, iGo wallMAX

allows you to power/charge a notebook computer from any

standard AC power source. With the included iGo dualpower

®

accessory, you can simultaneously power/charge a notebook

computer and a second mobile electronic device such as a

mobile phone, smartphone/PDA, MP3 player, digital camera and

more (additional iGo power tips sold separately). No other

adapters are as powerful or as versatile as the iGo line of power

products.

How to Use This iGo Power Adapter

Standard Wall Outlet: Once connected, your battery will

automatically charge regardless of whether your electronic

device is turned on or off. Note: We recommend that you use iGo

power adapters only with device batteries that meet or exceed the

original manufacturer's specifications. CAUTION: Like the power adapter

that came with your electronic device, this iGo adapter may get warm to

the touch during use. This is normal. Avoid placing your iGo adapter in

direct sunlight or next to heat sensitive materials.

FCC Compliance

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician
for help

Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the product.

FCC Compliance for iGo dualpower®Accessory

This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.

wallMAX

Notebook Input Cord

Connection

Port

AC Power Cord

Wall outlet: Use as shown.

1. Connect the correct notebook tip

to the iGo unit’s Notebook Input

Cord.

2. Insert the AC power cord into the

iGo wallMAX body.

4. Plug into the notebook.

3 Plug into the appropriate wall outlet.

The LED on the adapter will now

illuminate, indicating that power is

available. If the LED is not lit, be sure

to check all connections. Check

Troubleshooting

for additional

information.

Tech note:

When using iGo dualpower with this iGo adapter, the maximum

power output is shared between both devices.

If a device attached to iGo dualpower is not charging properly, it

may need more charging power than can be delivered at that

particular time. When this happens, the adapter will shut down

(LED extinguishes), and we recommend charging each device

separately.

Quick Connect Guide

Simultaneously power/charge a notebook

computer and a gadget by using the included

iGo dualpower

®

accessory and tips (additional

tips sold separately)

When charging both your notebook and your gadget, plug

dualpower into the connection port on the Notebook Input Cord.

Attention!

Unplug iGo wallMAX from the

power outlet each time you attach

a new tip to the cable.

Warning:

Choosing the wrong tip may

damage your device, causing it

to malfunction.

Tip Selection:

Make sure you have selected the

right tip for the device you want to

charge by checking the

compatibility hang tag.

power tip

(sold separately)

Notebook
Power Tip

iGo dualpower

®

Accessory

wallMAX