iGo pm000110004 User Manual
USB Power Ports
Getting Started
Troubleshooting
Before contacting customer support, here are some common
resolutions to problems:
• Devices not getting power? Ensure the tower is plugged in
and powered on, then try pressing the Instant On button.
• Devices not going into Green Mode? Try optimizing your
“Optimizing Your Setup”.
• Devices keep turning off? Try optimizing your Power Smart
Tower. See section titled, “Optimizing Your Setup”.
• If a circuit breaker is tripped, press the Reset button on the
back of your Power Smart Tower.
• Check to ensure connection to power source is secure and
that there is power at the source.
• Check the connections to the device to ensure they have not
come loose.
Product Support
We are committed to providing our customers with first-class
customer service and product support. For assistance, email
iGo Product Support at support@igo.com or call 1-800-474-7593.
Warranty
We warranty all iGo branded products against defects in material
and workmanship for two (2) years from the original date of
purchase. Please see enclosed Safety and Warranty information
sheet for details.
Product Registration
Receive one additional year of warranty coverage plus special
member-only offers when you register your product at
www.iGo.com/register. Registration helps us serve you better;
Failure to register does not diminish your warranty rights.
Questions?
Email us at support@igo.com
or
call 1-800-474-7593
Contents
• Power Smart Tower
Dimensions
11.25 x 3.9 x 5.3''
(287 x 99.06 x 134.62 mm)
6’ input cable
Specifications
Input 108-132 VAC; 50/60 Hz; 15A MAX
Surge Protection Rating: 4320 joules
USB Output: 4.25 W each
Important Notices
This product is intended for indoor use only. Use only in dry
locations. Do not use in tandem with another surge protector.
Do not use with medical equipment.
User Guide
Save Energy.
This product features iGo Green
TM
Technology,
which automatically reduces standby power
by up to 85%, conserving resources
and saving money.
Be Powerful. Eliminate Waste.
Using one iGo charger with power tips
instead of multiple chargers saves you
money and produces less waste.
Visit iGoGreen.com for more information
What is Vampire Power?
Just about everything plugged into your home and office sucks
power from the wall, even when they’re turned off. This is called
standby power, or VAMPIRE POWER. Even devices meeting Energy
Star guidelines suck Vampire Power.
The only true way to eliminate Vampire Power is to either unplug
all your chargers or manually turn off your power strips…until
now! Power products with iGo Green Technology shut off when
they’re not needed and provide full power when needed,
automatically. Only iGo Green power products drive a stake
through the heart of Vampire Power without you ever having to
do a thing.
P/N 8040472-01
AC Power Cord
Cable Management
Reset Button
Always On Outlets
iGo Green Outlets
Power Button
Power Indicator
Surge Protection Indicator
for second row of outlets
ALWAYS ON
2
Green Indicator
for top row of outlets
Green Indicator
INSTANT ON
AC POWER
PROTECTED
for iGo Green Outlets
Instant-On Button
1
T
e
c
n
h
e
e
r
G
o
M
I
G
i
L
E
V
A
M
P
I
R
n
o
l
o
N
A
I
E
P
g
T
y
E
S
TM
R
E
W
O
TM
iGo green
PROTEC
INS
PROTECTED
ON
D
Standard SetupOptimize Your Setup
(optional)
USB Charging
Congratulations on your
purchase of an iGo Power Smart
Tower power management
system.
• With your Power Smart Tower
you can now eliminate up to
85% of vampire power in your
home, office or home theater.
• The Power Smart Tower makes
it easy for you to conserve
electricity.
Your Power Smart Tower is
designed to work right out of the
box; however, you can maximize
your savings with just the push of a
button. Follow these few simple
steps to Optimize Your Setup and
start saving even more.
iGo green
By following these steps, the Power Smart
Tower automatically senses the power
needs of attached devices, providing power
when they need it and shutting down when
they don’t.
Plug your other devices into the Power Smart Tower’s
3.
Always On outlets.
Plug your Green Recommended devices into the Power
2.
Smart Tower’s Green outlets.
TM
ALWAYS ON
ALWAYS ON
4.
1.
Press the Power button.
INSTANT ON
Green Recommended Devices
Laptop chargers
Desktop computers
LCD monitors
Local printers
Consumer electronics chargers
(For mobile phones, Blue tooth headsets,
digital cameras, MP3 players,
GPS units, etc.)
5.
When devices are off, disconnected or in standby,
the Power Smart Tower enters “Green Mode”
and will shut the Green outlets off.
When in Green Mode, the Green Indicator
lights will flash slowly.
PROTECTED
AC POWER
Every 30 minutes the Power Smart Tower
checks to see if your devices need power.
If your devices need power, the
Green outlets will provide it.
Televisions
Home audio systems
Game consoles
Battery chargers
DVD players
CD players
PROTECTED
AC POWER
AC POWER
INSTANT
INSTANT ON
12
9
6
4.
3
Always On Recommended Devices
Network printers
Fax machines
Te l e p h o n e s
DVRs
Devices with clocks
Devices with a power switch
(e.g. lamps, fans, etc.)
CRT computer monitors
6.
If you need immediate power,
press the Instant On button
once to wake up the Green
outlets.
Vacuum cleaners
Devices with heating elements
(e.g. coffee makers, hairdryers,
toasters, space heaters, etc.)
Aquarium heaters or pumps
Any device that could cause
injury or damage
(e.g. power saws, lawn mowers, etc.)
The Power Smart Tower also features two USB charging ports that can be
used with the iGo USB Charging Cable and iGo tips, or with any other
USB charging cable. (Cables and tips not included)
NOTE:
The Power Smart
Tower does not
provide sync
capability.
PROTECTED
AC POWER
INSTANT ON
PROTECTED
TED
AC POWER
AC POWER
TANT ON
INSTANT ON
USBUSB
If Devices Are Not Going Into Green Mode
Optimize the Power Smart
Group Similar Devices Together Reset to the Original Factory Settings
Tower’s Behavior
Power Smart Tower’s two Green Outlets are managed in sets of 2. For best
results, plug devices with similar power needs into the Green outlets.
Green
Set 1
Green
Set 2
1
2
Examples of
High Draw Devices:
Desktop computers
Monitors
Printers
Game consoles
Examples of
Low Draw Devices:
Mobile phones
Bluetooth headsets
Digital cameras
MP3 players
When your devices are turned off or in
standby, press and hold the Instant On
button until the two Green Indicator
LEDs begin flashing rapidly and then release.
PROTECTED
PROTECTE
AC POWER
AC POWER
INSTANT ON
INSTANT ON
When the LEDs have stopped flashing, your Power Smart
Tower will be set to recognize that your devices are off
or in standby.
NOTE: This process should be performed anytime you
change the devices that are plugged into the Power
Smart Tower’s Green Outlet.
Press and hold the Instant On button
until the Green LEDs start flashing
and continue to hold for 10-15 seconds
until the LEDs stop flashing. Your
Power Smart Tower is now
restored to its factory settings.
PROTECTED
AC POWER
INSTANT ON
NOTE: Unplugging or turning off the main power will
not reset the Power Smart Tower.
Loading...