Page 1
Date
SKU
igo
Dining Side Chair
igoseating
Supports
up to 250 lbs
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Assembly Instruction
Congratulation on your buying of this premium dining side chair, which is designed to add on
your beloved home a beautiful mesh back silhouette and to bring a hint of modern
cosmopolitan styling to any gathering space. Enjoy & Thank You!
Manufactured : June, 2022
# : H002B04EM1-WF1(Blue), H002B04EM2-WF1(Purple), H002B04EM3-WF1(Grey)
H002B04EM4-WF1(Orange), H002B04EM5-WF1(Green)
Page 1
Page 2
PARTS LIST
Name Part Qty.
A A Legs x1PC
B B Legs x1PC
C
x1PC
Cushion
D Seat Cushion x1PC
Bolts
Back with Lumbar
E
M8x25mm
x5PCS
Bolts
F
M6x50mm
x4PCS
Bolt
G
M6x40mm
x1PC
H
Φ18*Φ8mm
x5PCS
Washer
Washer
J
Φ16*Φ6mm
x5PCS
K Allen Wrench x1PC
Page 2
Page 3
Please follow the following procedures step by step in building your
igo
Dining Side Chair, take special note to the sequence of steps:
Step 1: Attach the A Legs (Part A) to the B Legs (Part B) and by using Bolt (Part G) and washer
(Part J x1pc) in the middle hole.
Step 2: Attach the Back(Part C) to Seat Cushion (Part D) by using bolts (Part Ex5pcs) and washers
(Part H x5pcs).
Step 3: Attach the completed Legs (Part A&B) to Seat Cushion (Part D) by using 4 Bolts (Part F)
and washers (Part J x4pcs) in the front holes & back holes. Tighten by Allen Wrench (Part K).
Page 3
Page 4
Step 4: Position the assembled chair upright. Then completed!
ATTENTION：Make sure all bolts and screws are fully tightened before using chair.
* This Chair is for sitting only. Do not stand on this chair. Do not use this chair as a step ladder.
* Use this chair only for seating one person at a time.
* Do not use this chair unless all bolts, screws and other parts are firmly tightened.
* Every month, check all bolts, screws and other parts and tighten any that may have loosened.
* If parts are missing, broken, damaged, or worn, stop use of the product until repairs are made,
using factory supplied parts.
Page 4
Loading...