iGo ac051050001 User Manual

FCC Compliance

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment
and receiver

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV
technician for help

Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.

Canada Compliance

This Class B digital apparatus complies with Canadian
ICES-003

Cet appareil numériqué de la classe B est conformé à la
norme NMB-003 du Canada

Specifications

Dimensions: 3.21 x 1.51 x 1.0"

(81.53 x 38.35 x 25.4mm)

Safety Features

Short circuit protection
Thermal protection
Reverse polarity protection

©2002-2008 Mobility Electronics, Inc. Mobility Electronics and iGo are registered
trademarks of Mobility Electronics, Inc. All other brand names and logos are
trademarks or registered trademarks of their respective owners. Specifications
are subject to change without notice. Protected under one or more of the
following patents: 5,347,211, 6,967,885 and D506,981. Other United States and
foreign patents pending. Made in China. P/N 8040420-01 Rev. A.

Package Contents

battery recharger

For use with:

User Guide

Congratulations on your iGo®power purchase!
Compatible with today’s most popular gadgets,
this iGo battery charging accessory recharges
your rechargeable AA or AAA nickel metal
hydride (NiMH) batteries to use in any device
that requires these type of batteries.

®

Patented iGo

iGo power products deliver the precise amount
of power required by the AA or AAA batteries
through the use of patented tip technology. This
way, you don’t have to worry about selecting
the correct amount of power as you do with
other products – we do it for you!

Tip Technology

Quick Connect Guide

Carefully read this Quick Connect Guide before
using this iGo accessory for the first time. Incorrect
usage can result in your batteries not charging
properly. An iGo charger is required to use this
accessory (sold separately).

1. Insert one or two NiMH rechargeable AA
or AAA batteries as indicated by the
battery diagrams on the unit

2. Plug the unit onto any iGo charger and
make sure that the arrow on the charger's
connector faces up

3. Once connected, plug the iGo charger
into any power outlet

4. The blue light will begin to flash to indicate
the batteries are charging

5. Once the batteries are fully charged the blue
light will stop flashing and glow solid

6. Unplug the battery recharger and remove
the batteries

NOTE: If a faulty or damaged battery is inserted
into the unit, the blue light will not illuminate. In
order to verify if just one or both of the batteries is
faulty, insert each battery one at a time. If the blue
light begins to flash (indicating charge), that battery
is in good condition.

blue light

connector

iGo®battery recharger

Use with any

®

power charger

iGo

(sold separately)

Before using iGo battery recharger, please read this important safety information:

• Charge only NiMH (Nickel Metal Hydride)
rechargeable batteries that are in good condition.

• Charging any other type of battery may cause
damage to the batteries and/or the unit.

• Make sure that the batteries are inserted
correctly (see the diagram).

• Do not mix battery types (for example: different
capacities or brands).

• Do not use the battery recharger in wet or moist
conditions. Protect the battery recharger against
liquid spills.

• Use only with compatible iGo chargers and
adapters.

• Be aware that rechargeable batteries degrade
over time and should be replaced periodically to
ensure your gadget performs as expected.