Igloo FRW154C User Manual

INSTRUCTION MANUAL
Model Number:
CAUTION:
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
Igloo® is a registered trademark of Igloo Products Corp.
315 Attwell Drive, Etobicoke, Ontario, M9W 5C1, Canada
Curtis International LTD
FRW154C
Licensed to
Table of Contents
Wine Cooler Safety 3
Important Safeguides 4
Parts and Features 5
Important Safety Instructions 6
Installation Instructions 6
Before Using Your Wine Cooler 6
Installation of Your Wine Cooler 6
Electrical Connection 7
Extension Cord 7
Operating Your Appliance 8
Setting the Temperature Control 8
Storage Capacity 8
Care and Maintenance 9
Defrosting Your Wine Cooler 9
Cleaning Your Appliance 9
Vacation Time 9
Moving Your Wine Cooler 9
Energy Saving Tips 9
Troubleshooting Guide 10
Wiring Diagram 10
2
WINE COOLER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual for your appliance. Always read and obey all safety messages.
This is the Safety Alert Symbol. This symbol alerts you to potential hazards that
can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.
Danger means that failure to heed this
safety statement may result in severe personal injury or death.
Warning means that failure to heed this
safety statement may result in extensive product damage, serious personal injury, or death.
Caution means that failure to heed this
safety statement may result in minor or moderate personal injury, property or equipment damage.
All safety messages will alert you to know what the potential hazard is, tell you how to reduce the chance of injury, and let you know what can happen if the instructions are not followed.
3
IMPORTANT SAFEGUIDES
Before the Wine Cooler is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the Wine Cooler, follow basic precautions, including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and
do not use an extension cord.
It is recommended that a separate circuit, serving only your Wine Cooler be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
Never clean Wine Cooler parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the Wine Cooler or disconnect power before cleaning or servicing. Failure to do so can
result in electrical shock or death.
Do not attempt to repair or replace any part of your Wine Cooler unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
Use two or more people to move and install Wine Cooler. Failure to do so can result in back or
other injury.
To ensure proper ventilation for your Wine Cooler, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected from the elements, such as wind, rain, water spray or drips.
The Wine Cooler should not be located next to ovens, grills or other sources of high heat.
The Wine Cooler must be installed with all electrical, water and drain connections in accordance
with state and local codes. A standard electrical supply (120 V AC only, 60 Hz), properly grounded in accordance with the National Electrical Code and local codes and ordinances is required.
Do not kink or pinch the power supply cord of Wine Cooler.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the Wine Cooler to be leveled in order to work properly. You may need to make
several adjustments to level it.
All installation must be in accordance with local plumbing code requirements.
Make certain that the pipes are not pinched or kinked or damaged during installation.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the Wine Cooler.
Although the unit has been tested at the factory, due to long-term transit and storage, the first
batch of cubes must be discarded.
Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
4
PARTS & FEATURES
1 Glass Door 6 Levelling Leg 2 Door Seal 7 Temperature Control 3 Door Hinge 8 Power Cord 4 Wine Shelf (2) 9 Compressor 5 Bottle Rack 10 Water Box
5
IMPORTANT SAFETY INSTRUCTIONS

WARNING

Read all instructions before using the Wine Cooler.
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still dangerous . . . even if they will “just sit in the garage a few days”.
Before you throw away your old Wine Cooler: Take off the door. Leave the
shelves in place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
Never clean appliance parts with flammable fluids. The fumes can create a fire
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
Do not repair or replace any part of the Wine Cooler or attempt any servicing unless
specifically recommended in the user-maintenance instructions or in published user­repair instructions. Replace the fuse with the same type.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before Using Your Wine Cooler
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
2 Shelves (1 Large / 1 small)
1 Instruction Manual
1 warranty card
Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Wine Cooler
This Wine Cooler is designed to be free standing installation only, and should not be recessed or
built-in (Fully recessed).
Place your Wine Cooler on a surface that is strong enough to support it when it is fully loaded.
Allow 5 inches of space between the back and sides of the Wine Cooler, which allows the proper
air circulation to cool the heat sink.
Locate the Wine Cooler away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly.
This Wine Cooler uses compressor refrigeration technology and is not designed for storage in hot
areas like garages, warehouses or outdoors since it is designed to operate at a maximum of 30
degrees below the ambient temperature.
Avoid locating the unit in moist areas.
Plug the Wine Cooler into an exclusive, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized service center.
After plugging the Wine Cooler into a wall outlet, allow the unit to cool down for 2-3 hours before
placing any items in the compartment.
To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions:
2
Loading...
+ 14 hidden pages