IFLYTEK TRANS S01 User Manual

iFLYTEK
Speech Transcriber

S01

Quick Start Guide

QuickStart

Open the cover and pull out the power plug, connect the power

1

cord as shown by the arrow.

Quick Look

Camera LED Indicator Light Camera

Clip-on Microphone

Speaker

Power Button

Microphone

Display Screen

Speaker
Blue Button (shortcut)

Keyboard

Touchpad

Interfaces

XLR Audio Input Interface

Left 6.5 mm Audio Input Interface

3.5mm Audio Input Interface

SDI Video Input Interface

DVI Video Input Interface

VGA Video Input Interface

HDMI Video Input Interface

Note: HDMI cable featuring magnetic ring and shield is suggested when connecting
HDMI interface.

For more information

scan the QR code and follow us on WeChat

2

Press the power button to start.

Clip-on Microphone

Wear the Clip-on Microphone
as instructed.

Right

EtherNet Interface

3.5 mm Audio Output Interface

SIM Card Slot

HDMI Video Output Interface

USB 3.0 Interface

USB 2.0 Interface

Power Cord

Note: SIM Card Slot is compatible with China Mobile and China Unicom.
HDMI cable featuring magnetic ring and shield is suggested when connecting HDMI
interface.

Name and Content of Hazardous Substance

Hazardous Substance

Item

PCBA

Plastic Parts

Metal Outer Box

LCD Module

Speaker

Cable and Connector

Antenna

Battery

Keyboard

Clip-on Microphone

Adapter

Winder

Note: This form is made according to SJ/T11364 stipulations.
○ indicates that the content of hazardous substance in materials used

for the parts is below GB/T26572 stipulated threshold.

× indicates that the content of hazardous substance in at least one
material used for the parts is above GB/T26572 stipulated threshold.
However presently there is no industrial alternative to meet the
EU RoHS restrictions.

Pb Hg Cd Cr(VI) PBB PBDE

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

Statement

This QuickStart Guide has been reviewed and authenticated. All descrip­tions and instructions are accurate as of the print date. Device and
specifications after this date may change which will not be updated in this
version of the guide. Any damages directly or indirectly caused by the
inconformity or omission of this guide should not be borne by iFLYTEK.

○

○

○

○

○

○

○

○

○

○

○

○

Disposal of Device and Battery

Device should be disposed in compliance with applicable laws. For further
information, please contact local authority. Rechargeable battery is used
and will need to be replaced after reaching service expectancy. It may be
illegal by certain laws and regulations to leave used batteries in trash bin.
For details about how to properly dispose or recycle batteries, please
contact your local administrative department.

Wireless Device

Same as other wireless devices, your transcriber sends electromagnetic
wave, although at a much lower degree than those mobile phones and
other devices. Under certain circumstances, the uses of wireless products
may be restricted by building owners or government agencies, for instance,
using wireless devices during flight may disturb the regular operation of
other devices or services. Please be sure to request permission before
using your wireless product if you are not certain about the rules of using
them in particular situations (such as airport).

Caution

DO NOT disassemble or modify batteries because they may cause
explosion or liquid leakage. Disassembled or modified batteries are
instantly disqualified for the Warranty. Batteries may explore if not handled
properly in replacement. Batteries contain hazardous substance. To avoid
possible injuries please:

Keep batteries away from fire
DO NOT attempt to disassemble batteries

FCC Note

This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Note: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. such modifica­tions could void the user’s authority to operate this equipment

The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.

Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.

Copyright

Copyright ©iFLYTEK Co., Ltd. 2018. All RIGHTS RESERVED.