How it Works
IEI Integration
Loading...
POC-19i
User Manual
128 pgs8.47 Mb0
Table of contents
Loading...

IEI Integration POC-17i, POC-19i User Manual

POC-17i/19i Series
MODEL:
POC-17i/19i Series
Medical Panel PC with Intel® Core™ i7/i5/i3 Processor,
TFT LCD, Wireless LAN, Touch Screen,
User Manual
Rev. 1.00 – 7 August, 2013
Page i
Date Version Changes
7 August, 2013 1.00 Initial release
POC-17i/19i Series
Revision
Page ii
POC-17i/19i Series
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
Copyright
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Page iii
Contact Information
Headquarters
IEI Integration Corp.
POC-17i/19i Series
Address:
Phone: Fax: Web Site: Sales Email:
No. 29, Zongxing Rd., Xizhi Dist.,
New Taipei City 221, Taiwan +886-2-8691-6798 +886-2-6616-0028
www.ieiworld.com sales@ieiworld.com.tw
USA
IEI Integration USA Corp. Address:
Phone: Fax: Web Site:
138 University Parkway,
Pomona, CA 91768 +1-909-595-2819 +1-909-595-2816
www.ieiworld.com
Sales Email:
Page iv
sales@usa.ieiworld.com.tw
POC-17i/19i Series
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 OVERVIEW.................................................................................................................. 2
1.2 FEATURES................................................................................................................... 3
1.3 EXTERNAL OVERVIEW................................................................................................ 3
1.3.1 General Description........................................................................................... 3
1.3.2 Front Panel........................................................................................................ 3
1.3.3 Rear Panel ......................................................................................................... 4
1.3.4 I/O Interface Panel ............................................................................................ 5
1.3.5 OSD Control Buttons......................................................................................... 6
1.4 INTERNAL OVERVIEW................................................................................................. 6
1.5 SYSTEM SPECIFICATIONS............................................................................................ 7
1.6 DIMENSIONS............................................................................................................... 9
2 UNPACKING ................................................................................................................11
2.1 UNPACKING.............................................................................................................. 12
2.2 PACKING LIST........................................................................................................... 13
3 INSTALLATION......................................................................................................... 15
3.1 ANTI-STATIC PRECAUTIONS...................................................................................... 16
3.2 INSTALLATION PRECAUTIONS................................................................................... 16
3.3 INST ALLATION AND CONFIGU RATION STEPS............................................................. 17
3.4 REMOVING THE REAR PANEL COVER ....................................................................... 17
3.5 REMOVING THE INTERNAL ALUMINUM COVER ........................................................ 18
3.6 JUMPER SETTINGS .................................................................................................... 19
3.6.1 Access the Jumpers.......................................................................................... 20
3.6.2 Preconfigured Jumpers .................................................................................... 20
3.6.3 Clear CMOS Jumper........................................................................................ 21
3.6.4 COM1 Pin 9 Setting......................................................................................... 22
3.6.5 COM3 TX Function Select Jumper.................................................................. 24
3.6.6 COM3 RS-232/422/485 Jumper....................................................................... 25
Page v
3.6.6.1 COM3 RS-422 and RS-485 Pinouts......................................................... 26
3.6.7 COM3 RS Function Select Jumper.................................................................. 27
3.6.8 ME Debug Mode Jumper................................................................................. 28
3.6.9 iTPM Setting Jumper ....................................................................................... 29
3.6.10 ME RTC Select Jumper.................................................................................. 30
3.6.11 SPI Setting Jumper......................................................................................... 31
3.7 MOUNTING THE SYSTEM .......................................................................................... 32
3.7.1 Wall Mounting.................................................................................................. 32
3.7.2 Arm Mounting .................................................................................................. 35
3.8 BOTTOM PANEL CONNECTORS ................................................................................. 36
3.8.1 LAN Connection............................................................................................... 36
3.8.2 Serial Device Connection ................................................................................ 37
3.8.3 USB Device Connection................................................................................... 38
3.8.4 VGA Monitor Connection ................................................................................ 39
POC-17i/19i Series
3.9 AT/ATX MODE SELECTION...................................................................................... 40
3.9.1 AT Power Mode................................................................................................ 41
3.9.2 ATX Power Mode ............................................................................................. 41
4 SYSTEM MAINTENANCE ....................................................................................... 42
4.1 SYSTEM MAINTENANCE INTRODUCTION .................................................................. 43
4.2 ANTI-STATIC PRECAUTIONS...................................................................................... 43
4.3 TURN OFF THE POWER.............................................................................................. 44
4.4 REPLACING COMPONENTS........................................................................................ 44
4.4.1 Memory Module Replacement ......................................................................... 44
4.4.2 HDD Card Replacement.................................................................................. 46
5 BIOS SETUP................................................................................................................ 49
5.1 INTRODUCTION......................................................................................................... 50
5.1.1 Starting Setup................................................................................................... 50
5.1.2 Using Setup...................................................................................................... 50
5.1.3 Getting Help..................................................................................................... 51
5.1.4 Unable to Reboot After Configuration Changes.............................................. 51
5.1.5 BIOS Menu Bar................................................................................................ 51
5.2 MAIN........................................................................................................................ 52
5.3 ADVANCED............................................................................................................... 53
Page vi
POC-17i/19i Series
5.3.1 ACPI Settings................................................................................................... 54
5.3.2 T rusted Computing........................................................................................... 55
5.3.3 CPU Configuration.......................................................................................... 56
5.3.4 SATA Configuration......................................................................................... 57
5.3.5 USB Configuration........................................................................................... 58
5.3.6 Super IO Configuration ................................................................................... 59
5.3.6.1 Serial Port n Configuration....................................................................... 60
5.3.7 H/W Monitor.................................................................................................... 64
5.3.8 Serial Port Console Redirection...................................................................... 65
5.4 CHIPSET ................................................................................................................... 66
5.4.1 Northbridge Configuration.............................................................................. 67
5.4.2 Southbridge Configuration .............................................................................. 68
5.4.3 Intel IGD SWSCI OpRegion............................................................................. 69
5.5 BOOT........................................................................................................................ 71
5.6 SECURITY................................................................................................................. 72
5.7 EXIT......................................................................................................................... 73
6 SOFTWARE DRIVERS.............................................................................................. 75
6.1 AVAILABLE SOFTWARE DRIVERS .............................................................................. 76
6.2 CHIPSET DRIVER INSTALLATION............................................................................... 76
6.3 VGA DRIVER INSTALLATION.................................................................................... 80
6.4 LAN DRIVER INSTALLATION.................................................................................... 84
6.5 AUDIO DRIVER INSTALLATION ................................................................................. 86
6.5.1 BIOS Setup....................................................................................................... 86
6.5.2 Driver Installation ........................................................................................... 86
6.6 TOUCH SCREEN DRIVER........................................................................................... 90
6.7 WIRELESS DRIVER ................................................................................................... 92
6.8 KEYPAD DRIVER ...................................................................................................... 95
A SAFETY PRECAUTIONS....................................................................................... 100
A.1 SAFETY PRECAUTIONS .......................................................................................... 101
A.1.1 General Safety Precautions........................................................................... 101
A.1.2 Explanation of Graphical Symbols................................................................ 102
A.1.3 Anti-static Precautions.................................................................................. 103
A.1.4 Product Disposal........................................................................................... 104
Page vii
A.2 MAINTENANCE AND CLEANING PRECAUTIONS...................................................... 104
A.2.1 Maintenance and Cleaning............................................................................ 104
A.2.2 Cleaning Tools............................................................................................... 105
A.3 FCC PRECAUTIONS ............................................................................................... 105
B BIOS OPTIONS ........................................................................................................ 107
B.1 BIOS CONFIGURATION OPTIONS ........................................................................... 108
C WATCHDOG TIMER ...............................................................................................110
D HAZARDOUS MATERIALS DISCLOSURE........................................................113
D.1 HAZARDOUS MATER IAL DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ......................................114
POC-17i/19i Series
Page viii
POC-17i/19i Series
List of Figures
Figure 1-1: POC-17i/19i Series Medical Panel PC .......................................................................2
Figure 1-2: Front View....................................................................................................................4
Figure 1-3: Rear View.....................................................................................................................4
Figure 1-4: I/O Interface Connector Panel....................................................................................5
Figure 1-5: OSD Control Buttons..................................................................................................6
Figure 1-6: POC-17i Series Dimensions (mm).............................................................................9
Figure 1-7: POC-17i Series Dimensions (mm)...........................................................................10
Figure 3-1: Back Cover Retention Screws.................................................................................18
Figure 3-2: Aluminum Back Cover Retention Screws ..............................................................19
Figure 3-3: Clear CMOS Jumper .................................................................................................22
Figure 3-4: JP7 Jumper Setting Location ..................................................................................23
Figure 3-5: JP8 Jumper Setting Location ..................................................................................24
Figure 3-6: COM3 TX Function Select Jumper Location..........................................................25
Figure 3-7: COM3 RS-232/422/485 Serial Port Select Jumper Location..................................26
Figure 3-8: COM3 RX Function Select Jumper Location..........................................................28
Figure 3-9: ME Debug Mode Jumper Location..........................................................................29
Figure 3-10: iTPM Jumper Location............................................................................................30
Figure 3-11: ME RTC Jumper Location ......................................................................................31
Figure 3-12: SPI Jumper Location ..............................................................................................32
Figure 3-13: Wall-mounting Bracket...........................................................................................33
Figure 3-14: Chassis Support Screws........................................................................................34
Figure 3-15: Securing the Panel PC............................................................................................35
Figure 3-16: Arm Mounting Retention Screw Holes..................................................................36
Figure 3-17: LAN Connection......................................................................................................37
Figure 3-18: Serial Device Connector.........................................................................................38
Figure 3-19: USB Device Connection.........................................................................................39
Figure 3-20: VGA Connector .......................................................................................................40
Figure 3-21: AT/ATX Switch Location.........................................................................................40
Figure4-1: HDD Bracket Screws..................................................................................................45
Figure 4-2: SO-DIMM Socket Location .......................................................................................45
Page ix
Figure 4-3: DDR SO-DIMM Module Installation..........................................................................46
Figure 4-4: HDD Cover Screw......................................................................................................47
Figure 4-5: HDD Bracket Retention Screw.................................................................................47
Figure 4-6: HDD Removal ............................................................................................................48
Figure 6-1: Chipset Driver File Extraction Screen.....................................................................77
Figure 6-2: Chipset Driver Welcome Screen..............................................................................77
Figure 6-3: Chipset Driver License Agreement.........................................................................78
Figure 6-4: Readme File Information Screen.............................................................................78
Figure 6-5: Setup Progress Screen.............................................................................................79
Figure 6-6: Chipset Driver Installation Finish Screen...............................................................79
Figure 6-7: VGA Driver Readme File...........................................................................................80
Figure 6-8: VGA Driver Setup File Extraction Screen...............................................................81
Figure 6-9: VGA Driver Welcome Screen...................................................................................81
Figure 6-10: VGA Driver License Agreement.............................................................................82
POC-17i/19i Series
Figure 6-11: VGA Driver Readme File.........................................................................................82
Figure 6-12: VGA Driver Setup Operations................................................................................83
Figure 6-13: VGA Driver Setup Is Complete Screen .................................................................83
Figure 6-14: LAN Driver Welcome Screen ................................................................................. 84
Figure 6-15: LAN Driver Welcome Screen ................................................................................. 85
Figure 6-16: LAN Driver Installation ...........................................................................................85
Figure 6-17: LAN Driver Installation Complete..........................................................................86
Figure 6-18: The InstallShield Wizard Starts .............................................................................87
Figure 6-19: Preparing Setup Screen .........................................................................................87
Figure 6-20: InstallShield Wizard Welcome Screen..................................................................88
Figure 6-21: Audio Driver Progress Screen...............................................................................88
Figure 6-22: Installation Wizard Updates the System...............................................................89
Figure 6-23: Restart the Computer .............................................................................................89
Figure 6-24: PenMount Welcome Screen...................................................................................90
Figure 6-25: License Agreement.................................................................................................91
Figure 6-26: Choose Install Location..........................................................................................91
Figure 6-27: Installing PenMount Universal Driver V2.1.0.263.................................................92
Figure 6-28: PenMount Universal Driver Update Complete .....................................................92
Figure 6-29: Wireless Driver License Agreement......................................................................93
Figure 6-30: Wireless Driver Configuration Tool Options........................................................94
Figure 6-31: Wireless Mode Select Window ..............................................................................94
Page x
POC-17i/19i Series
List of Tables
Table 1-1: System Specifications..................................................................................................8
Table 3-1: Jumpers.......................................................................................................................20
Table 3-2: Preconfigured Jumpers .............................................................................................21
Table 3-3: Clear CMOS Jumper Settings....................................................................................21
Table 3-4: COM1 Pin 9 Setting Jumper Settings.......................................................................22
Table 3-5: COM3 Pin 9 Setting Jumper Settings.......................................................................23
Table 3-6: COM3 TX Function Select Jumper Settings.............................................................24
Table 3-7: COM3 RS-232/422/485 Serial Port Select Jumper Settings....................................26
Table 3-8: RS-422 Pinouts ...........................................................................................................26
Table 3-9: RS-485 Pinouts ...........................................................................................................27
Table 3-10: COM3 RX Function Select Jumper Settings..........................................................27
Table 3-11: ME Debug Mode Jumper Settings ..........................................................................28
Table 3-12: iTPM Jumper Settings..............................................................................................29
Table 3-13: ME RTC Jumper Settings.........................................................................................30
Table 3-14: SPI Jumper Settings.................................................................................................31
Table 5-1: BIOS Navigation Keys................................................................................................51
Page xii
POC-17i/19i Series
BIOS Menus
BIOS Menu 1: Main.......................................................................................................................52
BIOS Menu 2: Advanced..............................................................................................................54
BIOS Menu 3: ACPI Configuration..............................................................................................54
BIOS Menu 4: TPM Configuration...............................................................................................55
BIOS Menu 5: CPU Configuration...............................................................................................56
BIOS Menu 6: IDE Configuration.................................................................................................57
BIOS Menu 7: USB Configuration...............................................................................................58
BIOS Menu 8: Super IO Configuration........................................................................................59
BIOS Menu 9: Serial Port n Configuration Menu.......................................................................60
BIOS Menu 10: Hardware Health Configuration........................................................................64
BIOS Menu 11: Serial Port Console Redirection.......................................................................65
BIOS Menu 12: Chipset................................................................................................................66
BIOS Menu 13: Northbridge Chipset Configuration..................................................................67
BIOS Menu 14: Southbridge Chipset Configuration.................................................................68
BIOS Menu 15: Intel IGD SWSCI OpRegion ...............................................................................69
BIOS Menu 16: Boot.....................................................................................................................71
BIOS Menu 17: Security...............................................................................................................72
BIOS Menu 18: Exit.......................................................................................................................73
Page xiii
POC-17i/19i Series
Chapter
1

1 Introduction

Page 1

1.1 Overview

POC-17i/19i Series
Figure 1-1: POC-17i/19i Series Medical Panel PC
The POC-17i/19i Series is an Intel® Core™ powered flat panel PC with a rich variety of
functions and peripherals. All POC-17i/19i Series models are designed for easy and
simplified integration into point-of-care (POC) applications.
An Intel® Core™ i7/i5/i3 processor coupled with the Intel® HM55 chipset delivers optimal
memory, graphics, and peripheral I/O support. The system comes with 2.0 GB of
preinstalled DDR3 dual-channel SO-DIMMs and supports a maximum of 8.0 GB ensuring
smooth data throughputs with reduced bottlenecks and fast system access. The
POC-17i/19i Series features a Gen 5.7 Enhanced Graphics Engine with 12 execution units
and DirectX 10 and Open GL 2.1 support for high quality video performance. Dual display
support is provided via VGA and HDMI ports.
Two serial ports and four external USB 2.0 ports provide simplified connectivity to a variety
of external peripheral devices. Wi-Fi capabilities and two RJ-45 GbE connectors allow for
smooth connection of the system to an external LAN. The POC-17i/19i Series also
Page 2
supports a 2.5” SATA HDD drive which can be accessed without removing the entire back
panel.
POC-17i/19i Series
Intended use: The POC-17i/19i Series is intended to serve as a medical computing device
for integration with hospital system. It is designed for general purpose for hospital
environment. For data collection and display for reference. It shall not be used for
life-supporting system.

1.2 Features

The POC-17i/19i Series features the following:
Intel® Core™ i7/i5/i3 processor
Intel® HM55 chipset
2.0 GB DDR3 SO-DIMM preinstalled
802.11 a/b/g/n wireless module
Four USB 2.0 ports
Watchdog timer that triggers a system reset if the system hangs for some
reason
AT or ATX power mode
Touch screen
RoHS compliance

1.3 External Overview

1.3.1 General Description

The stylish POC-17i/19i Series panel PC is comprised of a screen, rear panel and bottom
panel. An anti-bacteria plastic front frame surrounds the front screen. The rear panel
provides screw holes for a wall-mounting bracket compliant with VESA FDMI standard. An
I/O interface on the bottom panel provides access to external interface connectors that
include LAN, USB 2.0, serial port, reset button, VGA, HDMI, audio connector, power
connector, power switch and AT/ATX mode switch. The right side panel provides access
to a SATA HDD drive.

1.3.2 Front Panel

The front side of the POC-17i/19i Series is a flat panel TFT LCD screen surrounded by an
anti-bacteria plastic frame. The power LED is located at the top center of the front panel
(
Figure 1-2).
Page 3
POC-17i/19i Series
Figure 1-2: Front View

1.3.3 Rear Panel

The rear panel provides access to retention screw holes that support the wall mounting.
Refer to
Figure 1-3.
Page 4
Figure 1-3: Rear View
POC-17i/19i Series

1.3.4 I/O Interface Panel

The I/O interface panel located on the bottom of the POC-17i/19i Series has the following
I/O interface connectors:
1 x Power switch
1 x 12 V DC In connector
1 x RS-232 connector
1 x RS-232/422/485 connector
2 x RJ-45 for Giga LAN connectors
1 x AT/ATX power mode switch
4 x USB 2.0 connectors
1 x HDMI connector
1 x Audio line-out connector
1 x VGA connector
1 x Reset button
The external I/O interface connector panel is shown in
Figure 1-4.
Figure 1-4: I/O Interface Connector Panel
Page 5

1.3.5 OSD Control Buttons

The POC-17i/19i Series has seven OSD control buttons as shown below.
POC-17i/19i Series
Figure 1-5: OSD Control Buttons

1.4 Internal Overview

The POC-17i/19i Series has the following components installed internally:
1 x Mainboard
1 x 2.0 GB 800/1066 MHz DDR3 SO-DIMM
1 x Wireless module
1 x 320GB SATA HDD
Page 6
POC-17i/19i Series

1.5 System Specifications

The technical specifications for the POC-17i/19i Series systems are listed in Table 1-1.
Specification POC-17i POC-19i LCD Size 17” 19” Max. Resolution 1280 x 1024 1280 x 1024 Brightness (cd/m2) 350 350 LCD Color 16.7 M 16.7 M Viewing Angle (H-V) 170。/ 160。 170。/ 160。 CPU Intel® Celeron® P4500 1.86G CPU
Intel® Core™ i3-330M 2.26G CPU Intel® Core™ i5-520M 2.4G CPU Intel® Core™ i7-620M 2.66G CPU
Chipset Intel® HM55 Memory One 204-pin 2 GB DDR3 SO-DIMM preinstalled
(system max. 8GB, dual SO-DIMM slot)
Speaker AMP 3 W + AMP 3 W (built-in stereo speakers) Watchdog Timer Software progr ammable supports 1 sec. ~ 255 sec. system reset Expansion 1 x PCIe Mini card (wireless LAN 802.11 a/b/g/n module) HDD Drive Bay One 2.5” 320GB SATA HDD preinstalled Construction Material Anti-bacteria plastic front frame Mounting VESA 100 mm x 100 mm:
Wall mounting Arm mounting
Dimensions (mm) (W x H x D) 428 x 350 x 76 470 x 383 x 79 Operational Temperature 0ºC ~ 50ºC Storage/Transportation Temperature -20ºC ~ 60ºC Operational Humidity 5% ~ 95%, non-co ndensing Storage/Transportation Humidity 5% ~ 95%, non-condensing Operational Pressure 700 hPa ~ 1060 hPa Storage/Transportation Pressure 500 hPa ~ 1060 hPa Net Weight 6.0kg 6.2kg EMC CE, FCC Class B
Page 7
Specification POC-17i POC-19i Safety ANSI/AAMI ES60601-1
CAN/CSA C22.2 No. 60601-1 IEC/EN 60601-1 3rd edition
Touch Screen Resistive Type 5-wire (touch controller is on board) Power Adapter Manufacturer: FSP Group Inc. (Medical Grade) Model: PMP120-12-S Input: 100 V ~ 240 V, 47 Hz ~ 63 Hz, 1.4 A ~ 0.6 A Output: 12 V, 8 A, 96 W System Rating 12 V, 8 A I/O Ports and Switches 1 x 12 V DC input jack 1 x Audio line-out connector 1 x RS-232 COM port connector 1 x RS-232/422/485 COM port connector
POC-17i/19i Series
2 x RJ-45 for GbE LAN 1 x HDMI port 4 x USB 2.0 ports 1 x VGA connector 1 x Power switch 1 x Reset button
Table 1-1: System Specifications
Page 8
POC-17i/19i Series

1.6 Dimensions

The POC-17i Series dimensions are shown in Figure 1-6 and listed below.
Width: 428 mm  Height: 250.1 mm  Depth: 76 mm (approximate)
Figure 1-6: POC-17i Series Dimensions (mm)
Page 9
The POC-19i Series dimensions are shown in Figure 1-7 and listed below.
Width: 469.9 mm  Height: 382.5 mm  Depth: 79 mm (approximate)
POC-17i/19i Series
Page 10
Figure 1-7: POC-17i Series Dimensions (mm)
POC-17i/19i Series
Chapter
2

2 Unpacking

Page 11
WARNING:
The labels on the external box are best to be read at a distance of
30 cm due to the small label size.

2.1 Unpacking

To unpack the flat panel PC, follow the steps below:
WARNING!
The front side LCD screen has a protective plastic cover stuck to the
POC-17i/19i Series
screen. Only remove the plastic cover after the flat panel PC has been
properly installed. This ensures the screen is protected during the
installation process.
Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
external (second) box.
Step 2: Open the external (second) box.
Step 3: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the
internal (first) box.
Step 4: Lift the monitor out of the boxes.
Step 5: Remove both polystyrene ends, one from each side.
Step 6: Pull the plastic cover off the flat panel PC.
Step 7: Make sure all the components listed in the packing list are present.
Page 12
POC-17i/19i Series

2.2 Packing List

The POC-17i/19i Series flat panel PC is shipped with the following components:
NOTE:
If any of these items are missing or damaged, contact the distributor or
sales representative immediately.
Quantity Item Image Standard
1 POC-17i/19i Series
1 Medical-grade power adapter
1 Power cord
1 Screw kit
Page 13
1 Touch pen
POC-17i/19i Series
1 User manual CD and driver CD
Page 14
POC-17i/19i Series
Chapter
3

3 Installation

Page 15

3.1 Anti-static Precautions

WARNING:
Failure to take ESD precautions during the maintenance of the device
may result in permanent damage to the device and severe injury to the
user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the POC-17i/19i Series. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the POC-17i/19i Series is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.
POC-17i/19i Series
Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: - When configuring the POC-17i/19i Series, place it
on an antic-static pad. This reduces the possibility of ESD damaging the
device.
Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.

3.2 Installation Precautions

When installing the flat panel PC, please follow the precautions listed below:
Power turned off: When installing the flat panel PC, make sure the power is
off. Failing to turn off the power may cause severe injury to the body and/or
damage to the system.
Page 16
Certified Engineers: Modification to the product is not permitted unless with
authorization of the company, certified engineer does not mean he/she has
the authority from the company, so remove the modification part.
POC-17i/19i Series
Anti-static Discharge : If a user open the rear panel of the flat panel PC, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.

3.3 Installation and Configuration Steps

The following installation steps must be followed.
Step 1: Remove the rear panel cover
Step 2: Remove the internal aluminum cover
Step 3: Configure the system jumpers
Step 4: Connect peripheral devices to the bottom panel of the flat panel PC
Step 5: Mount the flat panel PC

3.4 Removing the Rear Panel Cover

WARNING:
Over-tightening rear cover screws will crack the plastic frame.
Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
To access the POC-17i/19i Series internally, the rear panel cover must first be removed.
To remove the rear panel cover, please follow the steps below.
Step 1: Remove twenty-one (21) retention screws from the rear panel cover. See
3-1.
Figure
Page 17
POC-17i/19i Series
Figure 3-1: Back Cover Retention Screws
Step 2: Lift the cover off the POC-17i/19i Series panel PC.

3.5 Removing the Internal Aluminum Cover

WARNING:
Over-tightening rear cover screws will crack the plastic frame.
Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
To remove the internal aluminum cover, follow the steps below.
Step 1: Remove retention screws securing the internal aluminum cover.
Step 2:
Figure 3-2 shows the aluminum cover retention screws of the POC-17i/19i
Series.
Page 18
Loading...
+ 98 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use