NANO-945GSE EPIC Motherboard
IEI Technology Corp.
NANO-945GSE EPIC Motherboard
MODEL:
NANO-945GSE
45 nm Intel® Atom™ Processor EPIC SBC Supports
2 GB DDR2 Memory, VGA, Dual LVDS, Dual PCIe GbE,
CF Type II, Dual SATA, PCI-104 and PCIe Mini
User Manual
Rev. 2.00 – 24 August, 2011
Page 1
NANO-945GSE EPIC Motherboard
Revision
Date Version Changes
24 August, 2011 2.00 Updated LAN card from Realtek RTL111CP to Realtek
RTL111E
Updated Section 4.7.6. SATA Drive Connection
26 March, 2009 1.01 Added LVDS2 connector pinouts
Changed model name
25 September, 2008 1.00 Initial release
Page 2
NANO-945GSE EPIC Motherboard
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
Copyright
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Page 3
NANO-945GSE EPIC Motherboard
Manual Conventions
WARNING!
Warnings appear where overlooked details may cause damage to the equipment or result
in personal injury. Warnings should be taken seriously. Warnings are easy to recognize.
The word “warning” is written as “WARNING,” both capitalized and bold and is followed by
text. The text is the warning message. A warning message is shown below:
WARNING:
This is an example of a warning message. Failure to adhere to warning
messages may result in permanent damage to the NANO-945GSE or
personal injury to the user. Please take warning messages seriously.
CAUTION!
Cautionary messages should also be heeded to help reduce the chance of losing data or
damaging the NANO-945GSE. Cautions are easy to recognize. The word “caution” is
written as “CAUTION,” both capitalized and bold and is followed. The italicized text is the
cautionary message. A caution message is shown below:
CAUTION:
This is an example of a caution message. Failure to adhere to cautions
Page 4
messages may result in permanent damage to the NANO-945GSE.
Please take caution messages seriously.
NANO-945GSE EPIC Motherboard
NOTE:
These messages inform the reader of essential but non-critical information. These
messages should be read carefully as any directions or instructions contained therein can
help avoid making mistakes. Notes are easy to recognize. The word “note” is written as
“NOTE,” both capitalized and bold and is followed by text. The text is the cautionary
message. A note message is shown below:
NOTE:
This is an example of a note message. Notes should always be read.
Notes contain critical information about the NANO-945GSE. Please
take note messages seriously.
Page 5
NANO-945GSE EPIC Motherboard
Packing List
NOTE:
If any of the components listed in the checklist below are missing,
please do not proceed with the installation. Contact the IEI reseller or
vendor you purchased the NANO-945GSE from or contact an IEI sales
representative directly. To contact an IEI sales representative, please
send an email to
The items listed below should all be included in the NANO-945GSE package.
1 x NANO-945GSE Single Board Computer
2 x RS-232 cable (P/N: 32200-000049-RS)
2 x SATA Cable (P/N: 32000-062800-RS)
1 x KB/MS Cable (P/N: 32000-000138-RS)
1 x Power Cable (P/N: 32100-087100-RS)
1 x Mini Jumper
1 x Utility CD
1 x QIG (Quick Installation Guide)
Images of the above items are shown in Chapter 3.
0sales@iei.com.tw.
Page 6
Loading...