ECN-780-Q67 Embedde d System
Page i
MODEL:
Embedded System with 2nd Gen Intel® Core™
Rev. 1.02 – 5 July 2013
,
IEI Technology Corp.
ECN-780-Q67
i7 /i5/i3 Desktop Processor s , DVI, HDMI, VGA, GbE,
Two USB 3.0, Two USB 2.0, Three COM and RoHS C ompliant
User Manual
ECN-780-Q67 Embedde d System
Page ii
Revis ion
Date Version Changes
5 July 2013 1.03 Update the pictures of rear panel
Add NOTE in Section 3.7.1 Mounting the System with
Mounting Brackets
12 September 2012 1.02 Update the pictures of rear panel and front panel
6 June 2012 1.01 Update the pictures of rear panel
6 April 2012 1.00 Initial release
ECN-780-Q67 Embedde d System
Page iii
Copyright
COP YRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliabilit y, design a nd functi on and d oes not r epresent a com mitm ent on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, e lectronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered tradem ark s and produc t nam es ment ioned here in are us ed for ident ification
purposes only and m ay be trademarks and/or registe red trademarks of their respecti ve
owners.
ECN-780-Q67 Embedde d System
Page iv
Ta b le of Conte nts
1 INTRODUCTION .......................................................................................................... 1
1.1 OVERVIEW .................................................................................................................. 2
1.2 MODEL VARIATIONS ................................................................................................... 2
1.3 FEATURES ................................................................................................................... 2
1.4 TECHNICAL SPECIFICATIONS ...................................................................................... 3
1.5 FRONT PANEL ............................................................................................................. 5
1.6 REAR PANEL ............................................................................................................... 5
1.7 DIMENSIONS ............................................................................................................... 7
2 UNPACKING ................................................................................................................. 8
2.1 ANTI-STATIC PRECAUTIONS ........................................................................................ 9
2.2 UNPACKING PRECAUTIONS ......................................................................................... 9
2.3 UNPACKING CHECKLIST ........................................................................................... 10
3 INSTALLATION ......................................................................................................... 12
3.1 INSTALLATION PRECAUTIONS ................................................................................... 13
3.2 INST ALLATION AND CONFIGURATION STEPS ............................................................. 13
3.3 HARD DISK DRIVE (HDD) INSTALLATION ................................................................ 13
3.4 AT/ATX MODE SELECTION ...................................................................................... 15
3.4.1 AT Power Mode ................................................................................................ 16
3.4.2 ATX Power Mode ............................................................................................. 16
3.5 RESET THE SYSTEM .................................................................................................. 17
3.6 POWERING ON/OFF THE SYSTEM ............................................................................. 17
3.7 MOUNT THE SYSTEM ................................................................................................ 18
3.7.1 Mounting the System with Mounting Brackets ................................................. 18
3.8 EXTERNAL PERIPHERAL INTERFACE CONNECTORS ................................................... 20
3.8.1 Audio Connection ............................................................................................. 21
3.8.2 DVI Display Device Connection ...................................................................... 22
3.8.3 HDMI Device Connection ................................................................................ 23
3.8.4 LAN Connection ............................................................................................... 24
3.8.5 DB-9 Serial Port Connection ........................................................................... 25
ECN-780-Q67 Embedde d System
Page v
3.8.6 USB Device Connection ................................................................................... 26
3.8.7 VGA Monitor Connection ................................................................................ 27
3.9 INTEL
®
AMT SETUP PROCEDURE ............................................................................. 28
4 SYSTEM MOTHERBOARD ..................................................................................... 30
4.1 OVERVIEW ................................................................................................................ 31
4.1.1 Layout .............................................................................................................. 31
4.1.2 Motherboard Dimensions ................................................................................ 32
4.1.3 Peripheral Interface Connectors ..................................................................... 33
4.2 INTERNAL PERIPHERAL CONNECTORS ...................................................................... 34
4.2.1 Battery Connector ............................................................................................ 34
4.2.2 BIOS Programming Connector ........................................................................ 35
4.2.3 Digital I/O Connector ...................................................................................... 36
4.2.4 EC Programming Connector ........................................................................... 37
4.2.5 Fan Connector (System) .................................................................................. 38
4.2.6 Keyboard/Mouse Connector ............................................................................ 39
4.2.7 LED Module Connector ................................................................................... 40
4.2.8 PCIe Mini Card Slot ........................................................................................ 41
4.2.9 Power Connector ............................................................................................. 42
4.2.10 RS-232 Serial Port Connectors ...................................................................... 43
4.2.11 RS-422/485 Serial Port Connector ................................................................ 44
4.2.12 SATA Drive Connectors ................................................................................. 45
4.2.13 SATA Power Connectors ................................................................................ 46
4.2.14 SMBus Connector .......................................................................................... 47
4.2.15 SO-DIMM Connector ..................................................................................... 48
4.2.16 K Type Thermoc ouple Connectors ................................................................. 49
4.2.17 TPM Connector .............................................................................................. 50
4.2.18 USB 2.0 Connectors ....................................................................................... 51
4.2.19 VGA Connector .............................................................................................. 52
4.3 JUMPER SETTINGS .................................................................................................... 53
4.3.1 Clear CMOS ..................................................................................................... 53
4.3.2 Flash Descriptor Security Override ................................................................. 54
5 BIOS .............................................................................................................................. 56
5.1 INTRODUCTION ......................................................................................................... 57
ECN-780-Q67 Embedde d System
Page vi
5.1.1 Starting Setup ................................................................................................... 57
5.1.2 Using Setup ...................................................................................................... 57
5.1.3 Getting Help ..................................................................................................... 58
5.1.4 Unable to Reboot after Configuration Changes .............................................. 58
5.1.5 BIOS Menu Bar ................................................................................................ 58
5.2 MAIN ........................................................................................................................ 59
5.3 ADVANCED ............................................................................................................... 60
5.3.1 ACPI Configuration ......................................................................................... 61
5.3.2 RTC Wake Settings ........................................................................................... 62
5.3.3 T rusted Computing ........................................................................................... 63
5.3.4 CPU Configuration .......................................................................................... 64
5.3.4.1 CPU Information ....................................................................................... 65
5.3.5 SATA Configuration ......................................................................................... 66
5.3.6 Intel TXT (LT) Configuration ........................................................................... 67
5.3.7 USB Configuration ........................................................................................... 68
5.3.8 F81866 Super IO Configuration ...................................................................... 69
5.3.8.1 Serial Port n Configuration ....................................................................... 70
5.3.9 F81866 H/W Monitor ....................................................................................... 74
5.3.9.1 Smart Fan Mode Configuration ................................................................ 76
5.3.10 Serial Port Console Redirection .................................................................... 78
5.3.10.1 Console Redirection Settings .................................................................. 79
5.4 IEI FEATURE ............................................................................................................. 81
5.5 CHIPSET ................................................................................................................... 82
5.5.1 Northbridge Configuration .............................................................................. 83
5.5.2 Southbridge Configuration .............................................................................. 84
5.5.3 Intel IGD SWSCI OpRegion ............................................................................. 86
5.5.4 ME Subsystem .................................................................................................. 87
5.6 BOOT ........................................................................................................................ 88
5.7 SECURITY ................................................................................................................. 90
5.8 EXIT ......................................................................................................................... 91
6 SOFTWARE DRIVERS .............................................................................................. 93
6.1 AVAILABLE SOFTWARE DRIVERS .............................................................................. 94
6.2 STARTING THE DRIVER PROGRAM ............................................................................ 94
6.3 CHIPSET DRIVER INSTALLATION ............................................................................... 95
ECN-780-Q67 Embedde d System
Page vii
6.4 GRAPHICS DRIVER INSTALLATION ............................................................................ 99
6.5 LAN DRIVER INSTALLATION .................................................................................. 103
6.6 AUDIO DRIVER INSTALLATION ............................................................................... 107
6.7 USB 3.0 DRIVER INSTALLATION ............................................................................. 109
6.8 INTEL® MANAGEMENT ENGINE COMPONENTS INSTALLATION ................................ 111
A SAFETY PRECAUTIONS ........................................................................................ 116
A.1 SAFETY PRECAUTIONS ........................................................................................... 117
A.1.1 General Safety Precautions ............................................................................ 117
A.1.2 Anti-static Precautions ................................................................................... 118
A.1.3 Product Disposal ............................................................................................ 119
A.2 MAINTENANCE AND CLEANING PRECAUTIONS ....................................................... 119
A.2.1 Maintenance and Cleaning ............................................................................. 119
A.2.2 Cleaning T ools ............................................................................................... 120
B BIOS MENU OPTIONS ........................................................................................... 121
C ONE KEY RECOVERY ........................................................................................... 124
C.1 ONE KEY RECOVERY INTRODUCTION .................................................................... 125
C.1.1 System Requirement ...................................................................................... 126
C.1.2 Supported Operating System ......................................................................... 127
C.2 SETUP PROCEDURE FOR WINDOWS ........................................................................ 128
C.2.1 Hardware and BIOS Setup ............................................................................ 129
C.2.2 Create Partitions ........................................................................................... 129
C.2.3 Install Operating System, Drivers and Applications ..................................... 133
C.2.4 Building the Recovery Partition .................................................................... 134
C.2.5 Create Factory Default Image ...................................................................... 136
C.3 AUTO RECOVERY SETUP PROCEDURE .................................................................... 141
C.4 SETUP PROCEDURE FOR LINUX .............................................................................. 145
C.5 RECOVERY TOOL FUNCTIONS ................................................................................ 149
C.5.1 Factory Restore ............................................................................................. 150
C.5.2 Backup System ............................................................................................... 151
C.5.3 Restore Your Last Backup .............................................................................. 152
C.5.4 Manual .......................................................................................................... 153
C.6 RESTORE SYSTEMS FROM A LINUX SERVER THROUGH LAN .................................. 154
C.6.1 Configure DHCP Server Settings .................................................................. 155
ECN-780-Q67 Embedde d System
Page viii
C.6.2 Configure TFTP Settings ............................................................................... 156
C.6.3 Configure One Key Recovery Server Settings ............................................... 157
C.6.4 Start the DHCP, TFTP and HTTP ................................................................. 158
C.6.5 Create Shared Directory ................................................................................ 158
C.6.6 Setup a Client System for Auto Recovery ...................................................... 159
C.7 OTHER INFORMATION ............................................................................................ 162
C.7.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller ...................... 162
C.7.2 System Memory Requirement ........................................................................ 164
D WA TCHDOG TIMER .............................................................................................. 165
E HAZARDOUS MATERIALS DISCLOSURE ....................................................... 168
E.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ..................................... 169
ECN-780-Q67 Embedde d System
Page ix
List of Figures
Figure 1-1: ECN-780-Q67 ............................................................................................................... 2
Figure 1-2: ECN-780-Q67 Front Panel
Figure 1-3: ECN-780-Q67 Rear Panel
Figure 1-4: Physical Dimensions (mm)
Figure 3-1: Retention Screws Removal
Figure 3-2: HDD Bracket
Figure 3-3: HDD Retention Screws
Figure 3-4: AT/ATX Switch Location
Figure 3-5: Reset Button Location
Figure 3-6: Power Button Location
Figure 3-7: Mounting Screw Holes
Figure 3-8: Mounting Bracket Retention Screws
Figure 3-9: Peripheral Connectors (Front Panel)
Figure 3-10: Peripheral Connectors (Rear Panel)
Figure 3-11: Audio Connector
Figure 3-12: DVI Connector
Figure 3-13: HDMI Connection
Figure 3-14: LAN Connection
........................................................................................... 5
............................................................................................ 6
........................................................................................ 7
......................................................................................14
..............................................................................................................14
.............................................................................................15
...........................................................................................16
..............................................................................................17
.............................................................................................18
..............................................................................................18
......................................................................19
......................................................................20
.....................................................................21
.....................................................................................................22
.........................................................................................................23
....................................................................................................24
......................................................................................................25
Figure 3-15: DB-9 Serial Port Connector
Figure 3-16: USB Device Connection
Figure 3-17: VGA Connector
Figure 4-1: Connector and Jumper Location s (Front Side)
Figure 4-2: Connector and Jumper Location s (Rear Side)
Figure 4-3: Motherboard Dimensions (Front Side) (mm)
Figure 4-4: Motherboard Dimensions (Rear Side) (mm)
Figure 4-5: Battery Connector Location
Figure 4-6: BIOS Programming Connector Location
Figure 4-7: Digital I/O Connector Location
Figure 4-8: EC Programming Connector Location
Figure 4-9: System Fan Connector Location
....................................................................................26
.........................................................................................27
.......................................................................................................28
.....................................................31
.......................................................32
..........................................................32
...........................................................33
.....................................................................................35
................................................................36
................................................................................37
....................................................................38
.............................................................................39
ECN-780-Q67 Embedde d System
Page x
Figure 4-10: Keyboard/Mouse Connector Location ..................................................................40
Figure 4-11: LED Module Connector Loca tion
Figure 4-12: PCIe Mini Card Slot Location
Figure 4-13: Power Connector Location
Figure 4-14: RS-232 Serial Port Connector Location
Figure 4-15: RS-232 Serial Port Connector Location
Figure 4-16: RS-422/485 Serial Port Connector Location
Figure 4-17: SATA Drive Connector Locations
Figure 4-18: SATA Power Connector Locations
Figure 4-19: SMBus Connector Location
Figure 4-20: SO-DIMM Connector Locations
Figure 4-21: Type K Thermocouple Connec to r Locations
Figure 4-22: TPM Connector Location
Figure 4-23: USB Connector Locations
Figure 4-24: VGA Connector Location
Figure 4-25: Clear CMOS Jumper Location
Figure 4-26: Flash Descriptor Security Override Jumper Location
Figure 6-1: Drivers
..........................................................................41
.................................................................................42
....................................................................................43
................................................................44
................................................................44
.........................................................45
.........................................................................46
.......................................................................47
...................................................................................48
.............................................................................49
.......................................................49
........................................................................................50
......................................................................................51
.......................................................................................52
...............................................................................54
........................................55
........................................................................................................................95
Figure 6-2: Chipset Driver Screen
Figure 6-3: Chipset Driver Welcome Screen
Figure 6-4: Chipset Driver License Agreement
Figure 6-5: Chipset Driver Read Me File
Figure 6-6: Chipset Driver Setup Operations
Figure 6-7: Chipset Driver Installation Finish Screen
Figure 6-8: Graphics Driver Read Me File ................................................................................100
Figure 6-9: Graphics Driver Setup Files Extracted
Figure 6-10: Graphics Driver W elco me Sc reen
Figure 6-11: Graphics Driver License Agreement
Figure 6-12: Graphics Driver Read Me File
Figure 6-13: Graphics Driver Setup Operati o n s
Figure 6-14: Graphics Driver Installation Finish Screen
Figure 6-15: Intel® Network Connectio n Menu
Figure 6-16: LAN Driver Welcome Screen
Figure 6-17: LAN Driver License Agreement
Figure 6-18: LAN Driver Setup Options
...............................................................................................96
..............................................................................96
.........................................................................97
....................................................................................98
............................................................................98
...............................................................99
.................................................................100
.......................................................................101
...................................................................101
..............................................................................102
......................................................................102
........................................................103
........................................................................104
...............................................................................104
...........................................................................105
....................................................................................105
ECN-780-Q67 Embedde d System
Page xi
Figure 6-19: LAN Driver Installation .........................................................................................106
Figure 6-20: LAN Driver Installatio n Complete
Figure 6-21: Audio Driver Welcome Screen
Figure 6-22: Audio Driver Installation
Figure 6-23: Audio Driver Installation Complete
Figure 6-24: USB 3.0 Driver Welcome Screen
Figure 6-25: USB 3.0 Driver Choose Install Location
Figure 6-26: USB 3.0 Driver Choose Install Location
Figure 6-27: USB 3.0 Driver Installati o n Complete
Figure 6-28: Intel® ME Driver Welcome Screen
Figure 6-29: Intel® ME Driver License Agreement
Figure 6-30: Intel® ME Driver Read Me File
Figure 6-31: Intel® ME Driver Setup Ope ra tions
Figure 6-32: Intel® ME Driver Installation Finish Screen
Figure C-1: IEI One Key Recovery Tool Menu
Figure C-2: Launching the Recovery Tool
Figure C-3: Recovery Tool Setup Menu
Figure C-4: Command Prompt
........................................................................106
.............................................................................107
.......................................................................................108
.....................................................................108
.........................................................................109
.............................................................110
.............................................................110
..................................................................111
......................................................................112
..................................................................113
.............................................................................113
.....................................................................114
.......................................................115
.........................................................................125
...............................................................................130
...................................................................................130
..................................................................................................131
Figure C-5: Partition Creation Commands
Figure C-6: Launching the Recovery Tool
Figure C-7: Manual Recovery Environment fo r Windows
Figure C-8: Building the Recovery Partition
Figure C-9: Press Any Key to Continue
Figure C-10: Press F3 to Boot into Recovery Mode
Figure C-11: Recovery Tool Menu
Figure C-12: About Symantec Ghost Window
Figure C-13: Symantec Ghost Path
Figure C-14: Select a Local Source Drive
Figure C-15: Select a Source Partition from Basic Drive
Figure C-16: File Name to Copy Image to
Figure C-17: Compress Image
Figure C-18: Image Creation Confirmation
Figure C-19: Image Creation Complete
Figure C-20: Image Creation Complete
Figure C-21: Press Any Key to Continue
...............................................................................132
...............................................................................134
......................................................134
............................................................................135
...................................................................................135
................................................................136
............................................................................................136
.........................................................................137
..........................................................................................137
................................................................................138
.......................................................138
................................................................................139
...................................................................................................139
..............................................................................140
....................................................................................140
....................................................................................140
.................................................................................141
ECN-780-Q67 Embedde d System
Page xii
Figure C-22: Auto Recovery Utility ...........................................................................................142
Figure C-23: Launching the Recovery Tool
Figure C-24: Auto Recovery Environment for Windows
Figure C-25: Building the Auto Recovery Partition
Figure C-26: Factory Default Image Confirmation
Figure C-27: Image Creation Complete
Figure C-28: Press any key to continue
Figure C-29: Partitions for Linux
Figure C-30: Manual Recovery Environment for Linux
Figure C-31: Access menu.lst in Linux (Text Mode)
Figure C-32: Recovery Tool Menu
Figure C-33: Recovery Tool Main Menu
Figure C-34: Restore Factory Default
Figure C-35: Recovery Complete Window
Figure C-36: Backup System
Figure C-37: System Backup Complete Window
Figure C-38: Restore Backup
Figure C-39: Restore System Backup Complete Window
.............................................................................142
........................................................142
.................................................................143
..................................................................143
....................................................................................144
...................................................................................144
...............................................................................................146
..........................................................147
...............................................................148
............................................................................................148
...................................................................................149
.......................................................................................150
...............................................................................151
.....................................................................................................151
....................................................................152
....................................................................................................152
......................................................153
Figure C-40: Symantec Ghost Window
....................................................................................153
ECN-780-Q67 Embedde d System
Page xiii
List of Tables
Table 1-1: Model Variations ........................................................................................................... 2
Table 1-2: Technical Specifications
Table 2-1: Package List Contents
Table 4-1: Peripheral Interface Connectors
Table 4-2: Battery Connector Pinouts
Table 4-3: BIOS Programming Connector Pinouts
Table 4-4: Digital I/O Connector Pinouts
Table 4-5: EC Programming Connector Pinouts
Table 4-6: System Fan Connector Pinouts
Table 4-7: Keyboard/Mouse Connector Pinouts
Table 4-8: LED Module Connector Pinouts
Table 4-9: Power Connector Pinouts
Table 4-10: Serial Port Connector Pinouts (COM1, COM2, COM3, COM4 )
Table 4-11: RS-422/485 Serial Port Connector Pinouts
Table 4-12: SATA Power Connector Pinouts
Table 4-13: SMBus Connector Pinouts
Table 4-14: Type K Thermocouple Connector Pinouts
Table 4-15: TPM Connector Pinouts
.............................................................................................. 5
...............................................................................................11
...............................................................................34
........................................................................................35
...................................................................36
....................................................................................37
.......................................................................38
................................................................................39
.......................................................................40
................................................................................41
..........................................................................................43
............................44
............................................................45
.............................................................................47
......................................................................................48
.............................................................50
...........................................................................................51
Table 4-16: USB Port Connector Pinouts
Table 4-17: VGA Connector Pinouts
Table 4-18: Jumpers
Table 4-19: Clear CMOS Jumper Settings
Table 4-20: Flash Descriptor Security Override Jumper Settings
Table 5-1: BIOS Navigation Keys
...................................................................................52
...........................................................................................52
.....................................................................................................................53
..................................................................................54
...........................................54
................................................................................................58
ECN-780-Q67 Embedde d System
Page 1
Chapter
1
1 Introduction
ECN-780-Q67 Embedde d System
Page 2
1.1 Overview
Figure 1-1: ECN-780-Q67
The ECN-780-Q67 is an embedded system with one VGA port, one DVI port and one
HDMI port for dual display. It is powered by a 2nd generation Intel® Core™ i7/i5/i3,
Celeron®, Pentium® des ktop processor and uses the Intel® Q67 chipset. It has 2.0 GB
DDR3 memory on board and supports one 204-pin 1066/1333 MHz dual-c hannel DDR3
SDRAM SO-DIMM module up to 10 GB. The ECN-780-Q67 supports a 2.5” SATA HDD
with up to 3 Gb/s data transfer rate. Three serial ports, two external USB 2.0 ports and two
external USB 3.0 port s ensure simplified connectiv ity to a variety of external per ipheral
devices.
1.2 Mode l Variations
The model variations of the ECN-780-Q67 series are listed below.
Models Display Power Serial Ports Wireless
ECN-780-Q67 VGA + DVI + HDMI 100 ~ 240V AC input Three N/A
ECN-780W-Q67 VGA + DVI + HDMI 100 ~ 240V AC input Three 802.11b/g/n
Table 1-1: Model Variations
1.3 Features
The ECN-780-Q67 features are listed below:
2nd Generation Intel® Core™ i7/i5/i3, Celeron® and Pentium® desktop
processor supported
ECN-780-Q67 Embedde d System
Page 3
Intel® HD graphics supports H.264/AVC-MPEG2/VC1, DirectX 10.1 and
OpenGL 3.0
On-board 2GB DDR3 memory and one DDR3 SO-DIMM slot (system max. 10
GB)
Dual Gigabit Ethernet with Intel® AMT 7.0 support
Dual display output supported by VGA/DVI/HDMI
Optional 2.4GHz 802.11 b/g/n Wi-Fi
Easy to install SATA har d drive
USB 3.0 ports provide super speed data transfer
1.4 Technical Specifications
The ECN-780-Q67 technical specifications are listed in Table 1-2.
Chass is
Color
Dimensions
Chassis Construction
Motherboard
CPU
Chipset
Ethernet
Aud io
Mem ory
Storage
Black
230 x 60 x 173 mm
SECC
2nd Generation Intel® Core™ i7/i5/i3, Celeron® and Pentium®
desktop processor
Intel® Q67
Intel® 82579 PHY with Intel® AMT 7.0 supported
Intel® 82583V Ethernet controller
Realtek ALC892 HD Audio
On-board 2GB DDR3 memory
1 x 204-pin 1066/1333 MHz dual-channel DDR3 SDRAM SO-DIMM
slot (system max. 10GB)
SATA
1 x 2.5'' SATA HDD S pace
ECN-780-Q67 Embedde d System
Page 4
System Function
USB
Ethernet
RS-232
RS-422/485
Display
Resolution
Aud io
Interior Expansions
Switch
2 x USB 3.0 on rear side
2 x USB 2.0 on front side
2 x RJ-45 Gigabit LAN
1 x RS-232 on rear side
1 x RS-232 on front side
1 x RS-422/485 on front side
1 x HDMI
1 x DVI-D
1 x VGA
Up to 2048 x 1536 @ 75Hz (VGA), 1920 x 1200 @ 60Hz (HDMI),
1920 x 1080 @ 60Hz (DVI-D)
1 x Mic-in, 1 x Line-out on rear
2 x PCIe Mini slot (reserved for Wi-Fi and TV -Tunner)
Reset switch
Watchdog Timer
Power
Power Supply
Power Consumption
Reliability
Mounting
Operating Temperature
Storage Temperature
Operating Humidity
Operating Shock
Operating Vibration
AT/ATX switch
Software programmable support 1~255 sec. system reset
100 ~ 240V AC input
19V@3.5A (Intel® Core™ i7-2600S CPU with 1333MHz 4G DDR3
memory)
Desktop, Wall mount
-20°C ~ 50°C with air flow
-30°C ~ 60°C with air flow
5% ~95%, non-condensing
Half-sine wave shock 3G, 11ms, 3 shocks per axis
Meet MIL-STD-810F 514.5C-2 (with SSD)
ECN-780-Q67 Embedde d System
Page 5
Weight (Net/Gross )
Safety & EMC
Table 1-2: Technical Specifications
3.1 Kg/4.3 Kg
CE/FCC
1.5 Front Panel
The front panel of the ECN-780-Q67 has the following features (Figure 1-2):
1 x HDD LED
1 x Power button
1 x Power LED
1 x RS-232 DB-9 connector (COM3)
1 x RS-422/485 DB-9 connector (COM5)
2 x USB 2.0 connectors
Figure 1-2: ECN-780-Q67 Front Panel
1.6 Rear Panel
The rear panel of the ECN-780-Q67 has the following features (Figure 1-3):
1 x AC jack
1 x AT/ATX switch
2 x Audio jacks (Mic, Line-out)
ECN-780-Q67 Embedde d System
Page 6
1 x RS-232 DB-9 connector (COM1)
1 x DVI-D port
1 x HDMI port
1 x Reset button
2 x RJ-45 LAN connectors
1 x TV Tuner antenna reserved
2 x USB 3.0 connectors
1 x VGA port
1 x Wi-Fi antenna reserved
Figure 1-3: ECN-780-Q67 Rear Panel
ECN-780-Q67 Embedde d System
Page 7
1.7 Dimensions
The physical dimensions are shown below:
Figure 1-4: Physical Dimensions (mm)
ECN-780-Q67 Embedde d System
Page 8
Chapter
2
2 Unpacking
ECN-780-Q67 Embedde d System
Page 9
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during installation may result in
permanent damage to the ECN-780-Q67 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the ECN-780-Q67. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the ECN-780-Q67 or any other elec tric al component is handled, the
following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the ECN-780-Q67, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
ECN-780-Q67.
2.2 Unpacking Precautions
When the ECN-780-Q67 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 2.1.
Make sure the packing box is facing upwards so the ECN-780-Q67 does not
fall out of the box.
Make sure all the components shown in Section 2.3 are present.
ECN-780-Q67 Embedde d System
Page 10
2.3 Unpacking Checklist
NOTE:
If some of the components listed in the checklist below are m issing,
please do not proceed with the installation. Contact the IEI resel ler or
vendor you purchased the ECN-780-Q67 from or contact an IEI sales
representative direct ly. To contact an IEI s ales representati ve, please
send an email to
The ECN-780-Q67 is shipped with the following components:
Quantity Item and Part Number Im a g e
1 ECN-780-Q67 multimedia box
1 Power cord
(P/N: 32702-000401-100-RS)
1 Power cord convert cable
(P/N: 32000-089400-RS)
2 Mounting brackets
sales@iei.com.tw.
4 Mounting bracket screws
(P/N: 44015-030041-RS)
1 Wi-Fi antenna (for Wi-Fi module only)
(P/N: 32505-000900-100-RS)
Loading...