IEI Integration ECN-360A-D2550 User Manual

ECN-360A-D2550 Embe d de d Syste m
Page i
Embedded Sys tem with Intel® dual core Atom™ D2550 Processor,
Rev. 1.00 – 1 Ju ly 2013
,
IEI Technology Corp.
ECN-360A-D2550
Two VGA, Six US B 2.0, Four COM,
GbE and RoHS Compliant
User Manual
ECN-360A-D2550 Em b ed ded S yste m
Page ii
Date Version Changes
1 July 2013 1.00 Initial release

Revision

ECN-360A-D2550 Embe d de d Syste m
Page iii

Copyright

COP YRIGHT NOTICE
The information in this document is subject to change without prior notice in order to improve reliabilit y, design a nd functi on and d oes not r epresent a com mitm ent on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, e lectronic, or other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered tradem ark s and produc t nam es ment ioned here in are us ed for identif icatio n purposes only and m ay be trademarks and/or registe red trademarks of their respecti ve owners.
ECN-360A-D2550 Em b ed ded S yste m
Page iv

Ta b le of Contents

1 INTRODUCTION .......................................................................................................... 1
1.1 OVERVIEW .................................................................................................................. 2
1.2 MODEL VARIATIONS ................................................................................................... 2
1.3 FEATURES ................................................................................................................... 2
1.4 TECHNICAL SPECIFICATIONS ...................................................................................... 3
1.5 FRONT PANEL ............................................................................................................. 4
1.6 REAR PANEL ............................................................................................................... 5
1.7 DIMENSIONS ............................................................................................................... 7
2 UNPACKING ................................................................................................................. 8
2.1 ANTI-STATIC PRECAUTIONS ........................................................................................ 9
2.2 UNPACKING PRECAUTIONS ......................................................................................... 9
2.3 UNPACKING CHECKLIST ........................................................................................... 10
3 INSTALLATION ......................................................................................................... 12
3.1 INSTALLATION PRECAUTIONS ................................................................................... 13
3.2 INST ALLATION AND CONFIGURATION STEPS ............................................................. 13
3.3 HARD DISK DRIVE (HDD) INSTALLATION ................................................................ 13
3.4 WI-FI ANTENNA INSTALLATION (WIRELESS MODEL ONLY) ..................................... 15
3.5 MOUNT THE SYSTEM ................................................................................................ 16
3.6 EXTERNAL PERIPHERAL INTERFACE CONNECTORS ................................................... 17
3.6.1 Audio Connection ............................................................................................. 17
3.6.2 LAN Connection ............................................................................................... 18
3.6.3 DB-9 Serial Port Connection ........................................................................... 19
3.6.4 USB Device Connection ................................................................................... 20
3.6.5 VGA Monitor Connection ................................................................................ 21
4 SYSTEM MOTHERBOARD ..................................................................................... 23
4.1 PERIPHERAL INTERFACE CONNECTORS ..................................................................... 24
4.1.1 Layout .............................................................................................................. 24
4.1.2 Peripheral Interface Connectors ..................................................................... 24
ECN-360A-D2550 Embe d de d Syste m
Page v
4.1.3 External Interface Panel Connectors ............................................................... 25
4.2 INTERNAL PERIPHERAL CONNECTORS ...................................................................... 26
4.2.1 5 V SATA Power Connectors ............................................................................ 26
4.2.2 Audio Connector .............................................................................................. 26
4.2.3 Backlight Inverter Connector .......................................................................... 27
4.2.4 Battery Connector ............................................................................................ 28
4.2.5 Digital Input/Output (DIO) Connector ............................................................ 29
4.2.6 Fan Connectors ................................................................................................ 30
4.2.7 Front Panel Connector .................................................................................... 31
4.2.8 Keyboard/Mouse Connector ............................................................................ 31
4.2.9 LVDS1 Connector ............................................................................................ 32
4.2.10 PCIe Mini Card Slots ..................................................................................... 33
4.2.11 Power Connector (9V~28V) ........................................................................... 35
4.2.12 RS-232 Serial Port Connectors ...................................................................... 36
4.2.13 RS-422/485 Serial Port Connector ................................................................ 37
4.2.14 SATA Drive Connectors ................................................................................. 37
4.2.15 SO-DIMM Connector ..................................................................................... 38
4.2.16 USB Connector .............................................................................................. 39
4.3 EXTERNAL PERIPHERAL INTERFACE CONNECTOR PANEL ......................................... 40
4.3.1 Ethernet Connectors ........................................................................................ 40
4.3.2 USB Connectors ............................................................................................... 41
4.3.3 VGA Connectors .............................................................................................. 42
4.4 JUMPER SETTINGS .................................................................................................... 43
4.4.1 AT/ATX Power Selection Jumper ..................................................................... 43
4.4.2 Clear CMOS Jumper ........................................................................................ 44
4.4.3 LVDS1 Voltage Selection .................................................................................. 45
4.4.4 mSATA/PCIe Mini Selection ............................................................................ 46
5 BIOS .............................................................................................................................. 47
5.1 INTRODUCTION ......................................................................................................... 48
5.1.1 Starting Setup ................................................................................................... 48
5.1.2 Using Setup ...................................................................................................... 48
5.1.3 Getting Help ..................................................................................................... 49
5.1.4 Unable to Reboot after Configuration Changes .............................................. 49
5.1.5 BIOS Menu Bar ................................................................................................ 49
ECN-360A-D2550 Em b ed ded S yste m
Page vi
5.2 MAIN ........................................................................................................................ 50
5.3 ADVANCED ............................................................................................................... 51
5.3.1 ACPI Settings ................................................................................................... 51
5.3.2 RTC Wake Settings ........................................................................................... 52
5.3.3 CPU Configuration .......................................................................................... 54
5.3.4 IDE Configuration ........................................................................................... 55
5.3.5 USB Configuration ........................................................................................... 56
5.3.6 F81866 Super IO Configuration ...................................................................... 57
5.3.6.1 Serial Port n Configuration ....................................................................... 58
5.3.7 F81866 H/W Monitor ....................................................................................... 62
5.3.7.1 Smart Fan Mode Configuration ................................................................ 63
5.3.8 Serial Port Console Redirection ...................................................................... 64
5.3.9 iEi Feature ....................................................................................................... 66
5.4 CHIPSET ................................................................................................................... 67
5.4.1 Host Bridge Configuration .............................................................................. 67
5.4.1.1 Intel IGD Configuration ............................................................................ 68
5.4.2 South Bridge Configuration ............................................................................. 70
5.5 BOOT ........................................................................................................................ 71
5.6 SECURITY ................................................................................................................. 73
5.7 SAVE & EXIT ............................................................................................................ 73
A SAFETY PRECAUTIONS ......................................................................................... 75
A.1 SAFETY PRECAUTIONS ............................................................................................ 76
A.1.1 General Safety Precautions ............................................................................. 76
A.1.2 Anti-static Precautions .................................................................................... 77
A.1.3 Product Disposal ............................................................................................. 78
A.2 MAINTENANCE AND CLEANING PRECAUTIONS ........................................................ 78
A.2.1 Maintenance and Cleaning .............................................................................. 78
A.2.2 Cleaning T ools ................................................................................................. 79
B BIOS MENU OPTIONS ............................................................................................. 80
C ONE KEY RECOVERY ............................................................................................. 83
C.1 ONE KEY RECOVERY INTRODUCTION ...................................................................... 84
C.1.1 System Requirement ........................................................................................ 85
C.1.2 Supported Operating System ........................................................................... 86
ECN-360A-D2550 Embe d de d Syste m
Page vii
C.2 SETUP PROCEDURE FOR WINDOWS .......................................................................... 87
C.2.1 Hardware and BIOS Setup .............................................................................. 88
C.2.2 Create Partitions ............................................................................................. 88
C.2.3 Install Operating System, Drivers and Applications ....................................... 92
C.2.4 Building the Recovery Partition ...................................................................... 93
C.2.5 Create Factory Default Image ........................................................................ 95
C.3 AUTO RECOVERY SETUP PROCEDURE .................................................................... 100
C.4 SETUP PROCEDURE FOR LINUX .............................................................................. 104
C.5 RECOVERY TOOL FUNCTIONS ................................................................................ 108
C.5.1 Factory Restore ............................................................................................. 109
C.5.2 Backup System ................................................................................................ 110
C.5.3 Restore Your Last Backup ............................................................................... 111
C.5.4 Manual ........................................................................................................... 112
C.6 RESTORE SYSTEMS FROM A LINUX SERVER THROUGH LAN ................................... 113
C.6.1 Configure DHCP Server Settings ................................................................... 114
C.6.2 Configure TFTP Settings ................................................................................ 115
C.6.3 Configure One Key Recovery Server Settings ................................................ 116
C.6.4 Start the DHCP, TFTP and HTTP .................................................................. 117
C.6.5 Create Shared Directory ................................................................................. 117
C.6.6 Setup a Client System for Auto Recovery ....................................................... 118
C.7 OTHER INFORMATION ............................................................................................ 121
C.7.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller ...................... 121
C.7.2 System Memory Requirement ........................................................................ 123
D WATCHDOG TIMER .............................................................................................. 124
E HAZARDOUS MATERIALS DISCLOSURE ....................................................... 127
E.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CER TIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY ..................................... 128
ECN-360A-D2550 Em b ed ded S yste m
Page viii

List of Figures

Figure 1-1: ECN-360A-D2550 ......................................................................................................... 2
Figure 1-2: ECN-360A-D2550 Front Panel Figure 1-3: ECN-360A-D2550 Rear Panel Figure 1-4: Physical Dimensions (mm) Figure 3-1: Retention Screws Removal Figure 3-2: HDD Bracket Figure 3-3: HDD Retention Screws Figure 3-4: Wi-Fi Antenna Installation Figure 3-5: Mounting Bracket Retention Screws Figure 3-6: Audio Connector Figure 3-7: LAN Connection Figure 3-8: DB-9 Serial Port Connector Figure 3-10: USB Device Connection Figure 3-11: VGA Connector Figure 4-1: Connectors and Jumpers Figure 4-2: 5 V SATA Power Connector Locations Figure 4-3: Audio Connector Location Figure 4-4: Backlight Inverter Con n ecto r Location
.................................................................................... 5
..................................................................................... 6
........................................................................................ 7
......................................................................................14
..............................................................................................................14
.............................................................................................15
........................................................................................16
......................................................................16
.......................................................................................................18
........................................................................................................19
......................................................................................20
.........................................................................................21
.......................................................................................................22
.........................................................................................24
...................................................................26
.......................................................................................27
...................................................................28
Figure 4-5: Battery Connector Location Figure 4-6: Digital I/O Connector Location Figure 4-7: Fan Connector Locations Figure 4-8: Front Panel Connector Location Figure 4-9: Keyboard/Mouse Connector Loc ation Figure 4-10: LVDS1 Connector Locati o n Figure 4-11: PCIe Mini Card Slot Locations Figure 4-12: Power Connector Location Figure 4-13: RS-232 Serial Port Connector Locations Figure 4-14: RS-422/485 Connector Location Figure 4-15: SATA Drive Connector Locations Figure 4-16: SO-DIMM Connector Location
.....................................................................................29
................................................................................29
.........................................................................................30
.............................................................................31
....................................................................32
....................................................................................33
...............................................................................34
....................................................................................35
..............................................................36
............................................................................37
.........................................................................38
...............................................................................39
ECN-360A-D2550 Embe d de d Syste m
Page ix
Figure 4-17: USB Connector Location ........................................................................................39
Figure 4-18: External Peripheral Interface Connector Figure 4-19: RJ-45 Ethernet Connector Figure 4-20: VGA Connector Figure 4-21: AT/ATX Power Selection Jumper Location Figure 4-22: Clear CMOS Jumper Location Figure 4-23: LVDS1 Voltage Selection Jumper Location Figure 4-24: mSATA/PCIe Mini Mode Selection Jumper Location Figure C-1: IEI One Key Recovery Tool Menu Figure C-2: Launching the Recovery Tool Figure C-3: Recovery Tool Setup Menu Figure C-4: Command Prompt Figure C-5: Partition Creation Commands Figure C-6: Launching the Recovery Tool Figure C-7: Manual Recovery Environment fo r Windows Figure C-8: Building the Recovery Partition Figure C-9: Press Any Key to Continue Figure C-10: Press F3 to Boot into Recovery Mode
..............................................................40
......................................................................................41
.......................................................................................................42
..........................................................44
...............................................................................45
.........................................................46
..........................................46
...........................................................................84
.................................................................................89
.....................................................................................89
....................................................................................................90
.................................................................................91
.................................................................................93
........................................................93
..............................................................................94
.....................................................................................94
..................................................................95
Figure C-11: Recovery Tool Menu Figure C-12: About Symantec Ghost Window Figure C-13: Symantec Ghost Path Figure C-14: Select a Local Source Drive Figure C-15: Select a Source Partition from Basic Drive Figure C-16: File Name to Copy Image to Figure C-17: Compress Image Figure C-18: Image Creation Confirmation Figure C-19: Image Creation Complete Figure C-20: Image Creation Complete Figure C-21: Press Any Key to Continue Figure C-22: Auto Recovery Utility Figure C-23: Launching the Recovery Tool Figure C-24: Auto Recovery Environment for Windows Figure C-25: Building the Auto Recovery Partition Figure C-26: Factory Default Image Confirmation Figure C-27: Image Creation Complete
..............................................................................................95
...........................................................................96
............................................................................................96
..................................................................................97
.........................................................97
..................................................................................98
.....................................................................................................98
................................................................................99
......................................................................................99
......................................................................................99
.................................................................................100
...........................................................................................101
.............................................................................101
........................................................101
.................................................................102
..................................................................102
....................................................................................103
ECN-360A-D2550 Em b ed ded S yste m
Page x
Figure C-28: Press any key to continue ...................................................................................103
Figure C-29: Partitions for Linux Figure C-30: Manual Recovery Environment for Linux Figure C-31: Access menu.lst in Linux (Text Mode) Figure C-32: Recovery Tool Menu Figure C-33: Recovery Tool Main Menu Figure C-34: Restore Factory Default Figure C-35: Recovery Complete Window Figure C-36: Backup System Figure C-37: System Backup Complete Window Figure C-38: Restore Backup Figure C-39: Restore System Backup Complete Window Figure C-40: Symantec Ghost Window
...............................................................................................105
..........................................................106
...............................................................107
............................................................................................107
...................................................................................108
.......................................................................................109
...............................................................................110
.....................................................................................................110
....................................................................111
....................................................................................................111
......................................................112
....................................................................................112
ECN-360A-D2550 Embe d de d Syste m
Page xi

List of Tables

Table 1-1: Model Variations ........................................................................................................... 2
Table 1-2: Technical Specifications Table 2-1: Package List Contents Table 4-1: Peripheral Interface Connectors Table 4-2: Rear Panel Connectors Table 4-3: 5 V SATA Power Connector Pinouts Table 4-4: Audio Connector Pinouts Table 4-5: Backlight Inverter Connector Pinouts Table 4-6: Battery Connector Pinouts Table 4-7: Digital I/O Connector Pinouts Table 4-8: Fan Connector Pinouts Table 4-9: Front Panel Connector Pinouts Table 4-10: Keyboard/Mouse Connector Pinouts Table 4-11: LVDS1 Connector Pinouts Table 4-12: PCIe Mini Card Slot Pinouts Table 4-13: Power Connector Pinouts Table 4-14: RS-232 Serial Port Connector Pinouts Table 4-15: RS-422/485 Connector Pinouts
.............................................................................................. 4
...............................................................................................11
...............................................................................25
..............................................................................................25
........................................................................26
..........................................................................................27
......................................................................28
........................................................................................29
....................................................................................30
..............................................................................................30
.................................................................................31
.....................................................................32
.......................................................................................33
....................................................................................35
........................................................................................36
...................................................................36
...............................................................................37
Table 4-16: SATA Drive Connector Pinouts Table 4-17: USB Connector Pinouts Table 4-18: LAN Pinouts Table 4-19: RJ-45 Ethernet Connector LEDs Table 4-20: USB Port Pinouts
Table 4-21: VGA Connector Pinouts ...........................................................................................42
Table 4-22: Jumpers Table 4-23: AT/ATX Power Selection Jumper Settings Table 4-24: Clear CMOS Jumper Settings Table 4-25: LVDS1 Voltage Selection Jumper Settings Table 4-26: mSATA/PCIe Mini Mode Selection Jumper Settings Table 5-1: BIOS Navigation Keys
...............................................................................38
...........................................................................................39
..............................................................................................................40
.............................................................................41
......................................................................................................41
.....................................................................................................................43
.............................................................44
..................................................................................44
............................................................45
.............................................46
................................................................................................49
ECN-360A-D2550 Embe d de d Syste m
Page 1
Chapter
1

1 Introduction

ECN-360A-D2550 Em b ed ded S yste m
Page 2

1.1 Overview

Figure 1-1: ECN-360A-D2550
The ECN-360A-D2550 embedded system is a fanless system with two VGA ports for dual display. It is powered by Intel® dual core Atom™ D2550 processor and supports one 204-pin DDR3 SDRAM SO-DIMM module up to 4 GB (2GB memory preinstalled). The ECN-360A-D2550 supports a 2.5” SATA HDD with up to 3 G b/s data transfer rate. Four serial ports and six USB 2.0 p orts ensure simplified connectivity to a varie ty of external peripheral devices.

1.2 Mode l Variations

The model variations of the ECN-360A-D2550 series are listed below.
Models Wireless ECN-360A-D2550/2G-R10 N/A ECN-360AW-D2550/2G-R10 802.11b/g/n
Table 1-1: Model Variations

1.3 Features

The ECN-360A-D2550 features are listed below:
ECN-360A-D2550: Intel® Atom™ D2550 dual core 1.86 GHz  Rich video output solution: ECN-360A-D2550: 2 x VGA  Ruggedized embedded computer: support -10°C~60°C with air flow (SSD)
ECN-360A-D2550 Embe d de d Syste m
Page 3

1.4 Technical Specifications

The ECN-360A-D2550 technical specifications are listed in Table 1-1.
Chassis
Color
Dimension ( WxDxH)
System Fan
Chassis Construction
Motherboard
Motherboard model
CPU
Chipset
System Memory
Ethernet
Storage
Hard Drive
Black 255 x 130 x 63 Fanless SECC
NANO-CV-D25502 Intel® dual core Atom™ D2550 1.86GHz Intel® NM10 1 x 204-pin DDR3 SDRAM SO-DIMM (System Max : 4GB)
Pre-installed DDR3 2GB memory 2 x Realtek RTL8111E PCIe GbE controller
1 x 2.5'' SATA HDD Bay
I/O interfaces
USB
LAN
RS-232
RS-422/485
Digit al I/O
Displa y
Resolution
Audio
Wireles s
Expansions
6 x USB 2.0 2 x RJ-45 LAN 3 x RS-232 (DB-9 connector) 1 x RS-422/485 (DB-9 connector) 1 x DB-9 ; 8 bit Digital I/O , 4 bit input / 4 bit output 2 x VGA VGA: Up to 1920 x 1200 @ 60Hz 1 x Line-out 1 x 802.11 b/g/n ( optional)
ECN-360A-D2550 Em b ed ded S yste m
Page 4
PCIe Mi n i
Power
Power Input
Power Consumption
Reliability
Mounting
Operating Temperature
Storage Temperature
Operating Shock
1 x Full size (support mSATA) 1 x Half size
9~28V DC Power 1 : DC Jack Power 2: Terminal block
12V@1.59A (Intel® Atom™ D2550 with 2GB DDR3 memory)
Wall mount ; VESA 100
-10°C~55°C with air flow (SSD) 0°C~45°C with air flow (HDD)
-20°C ~ 60°C Half-sine wave shock 3G; 11ms; 3 shocks per axis
Operating Vibration
Weight (Net/Gross)
Safety / EMC
OS
Supported OS
Table 1-2: Technical Specifications
MIL-STD-810F 514.5C-1
2.2 kg / 3 kg CE / FCC Class A
Microsoft® WES7E Microsoft® Windows® XP Embedded

1.5 Front Panel

The front panel of the ECN-360A-D2550 has the following features (Figure 1-2):
1 x HDD LED  1 x Power button  2 x USB 2.0 connectors
ECN-360A-D2550 Embe d de d Syste m
Page 5
Figure 1-2: ECN-360A-D2550 Front Panel

1.6 Rear Panel

The rear panel of the ECN-360A-D2550 has the following features (Figure 1-3):
1 x Line-out  1 x 9 V ~ 28 V power jack  1 x Reset button  2 x RJ-45 LAN connectors  3 x RS-232 (DB-9 connector)  1 x RS-422/485 (DB-9 connector)  1 x 9 V ~ 28 V terminal block  4 x USB 2.0 connectors  2 x VGA connectors  2 x WiFi antenna connectors
ECN-360A-D2550 Em b ed ded S yste m
Page 6
Figure 1-3: ECN-360A-D2550 Rear Panel
ECN-360A-D2550 Embe d de d Syste m
Page 7

1.7 Dimensions

The physical dimensions are shown below:
Figure 1-4: Physical Dimensions (mm)
ECN-360A-D2550 Em b ed ded S yste m
Page 8
Chapter
2

2 Unpacking

ECN-360A-D2550 Embe d de d Syste m
Page 9

2.1 Anti-s tatic Precautions

WARNING:
Failure to take ESD precautions during installation may result in permanent damage to the ECN-360A-D2550 and sev ere injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ECN-360A-D2550. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the ECN-360A-D2550 or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any conducting materials that are connected to the ground.
Use an anti-static pad: When configuring the ECN-360A-D2550, place it on
an antic-static pad. This reduces the possibility of ESD damaging the ECN-360A-D2550.

2.2 Unpacking Precautions

When the ECN-360A-D2550 is unpacked, please do the following:
Follow the anti-static precautions outlined in Section 2.1.  Make sure the packing box is facing upwards so the ECN-360A-D2550 does
not fall out of the box.
Make sure all the components shown in Section 2.3 are present.
ECN-360A-D2550 Em b ed ded S yste m
Page 10

2.3 Unpacking Checklist

NOTE:
If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI resel ler or vendor you purchased the ECN-360A-D2550 from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to
The ECN-360A-D2550 is shipped with the following components:
Quantity Item and Part Number Imag e
1 ECN-360A-D2550
1 power adapter
1 power cord
2 Mounting brackets
sales@iei.com.tw.
1 Screw set
2 wireless antenna (for wireless model)
Loading...