ICE-CV-D25502/N26002 COM Express Module
IEI Technology Corp.
MODEL:
ICE-CV-D25502/N26002
COM Express R2.0 Module (Type 2),
Intel® Atom™ D2550/N2600 Processor ,
DDR3 and RoHS Compliant
User Manual
Rev. 1.00 – 3 October, 2012
Page i
ICE-CV-D25502/N26002 COM Express Module
Revision
Date Version Changes
3 October, 2012
1.00 Initial release
Page ii
ICE-CV-D25502/N26002 COM Express Module
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
Copyright
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Page iii
ICE-CV-D25502/N26002 COM Express Module
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 INTRODUCTION........................................................................................................... 2
1.2 MODEL VARIATIONS ................................................................................................... 2
1.3 FEATURES................................................................................................................... 3
1.4 CONNECTORS ............................................................................................................. 3
1.5 DIMENSIONS............................................................................................................... 4
1.6 DATA FLOW................................................................................................................ 5
1.7 TECHNICAL SPECIFICATIONS ...................................................................................... 6
2 PACKING LIST.............................................................................................................8
2.1 ANTI-STATIC PRECAUTIONS........................................................................................ 9
2.2 UNPACKING PRECAUTIONS......................................................................................... 9
2.3 PACKING LIST........................................................................................................... 10
2.4 OPTIONAL ITEMS.......................................................................................................11
3 CONNECTORS ........................................................................................................... 12
3.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 13
3.1.1 ICE-CV-D25502/N26002 Layout..................................................................... 13
3.1.2 Peripheral Interface Connectors ..................................................................... 14
3.2 INTERNAL PERIPHERAL CONNECTORS......................................................................14
3.2.1 COM Express Connector AB........................................................................... 14
3.2.2 COM Express Connector CD........................................................................... 18
3.2.3 SO-DIMM Connector....................................................................................... 23
3.2.4 SPI Connector.................................................................................................. 23
4 INSTALLATION ......................................................................................................... 25
4.1 ANTI-STATIC PRECAUTIONS...................................................................................... 26
4.2 INSTALLATION CONSIDERATIONS.............................................................................. 26
4.3 SO-DIMM INSTALLATION ....................................................................................... 28
4.4 MOUNTING THE ICE-CV-D25502/N26002 TO AN OPTIONAL BASEBOARD .................. 29
5 BIOS.............................................................................................................................. 32
Page iv
ICE-CV-D25502/N26002 COM Express Module
5.1 INTRODUCTION......................................................................................................... 33
5.1.1 Starting Setup................................................................................................... 33
5.1.2 Using Setup...................................................................................................... 33
5.1.3 Getting Help..................................................................................................... 34
5.1.4 Unable to Reboot after Configuration Changes.............................................. 34
5.1.5 BIOS Menu Bar................................................................................................ 34
5.2 MAIN........................................................................................................................ 35
5.3 ADVANCED ............................................................................................................... 36
5.3.1 ACPI Settings................................................................................................... 36
5.3.2 RTC Wake Settings........................................................................................... 37
5.3.3 T rusted Computing........................................................................................... 39
5.3.4 CPU Configuration.......................................................................................... 40
5.3.5 IDE Configuration........................................................................................... 41
5.3.6 USB Configuration........................................................................................... 42
5.3.7 iWDD H/W Monitor......................................................................................... 43
5.3.8 Secondary Super IO Configuration ................................................................. 44
5.3.8.1 COM n Configuration............................................................................... 44
5.3.9 Super IO Configuration ................................................................................... 48
5.3.9.1 Floppy Disk Controller Configuration...................................................... 49
5.3.9.2 COM n Configuration............................................................................... 50
5.3.9.3 Parallel Port Configuration....................................................................... 53
5.3.10 WinBond W83627EHG Har dware Monitor................................................... 54
5.3.11 Serial Port Console Redirection..................................................................... 56
5.3.12 iEi Feature..................................................................................................... 58
5.4 CHIPSET ................................................................................................................... 59
5.4.1 Host Bridge Configuration .............................................................................. 59
5.4.1.1 Intel IGD Configuration............................................................................ 60
5.4.2 South Bridge Configuration............................................................................. 62
5.5 BOOT........................................................................................................................ 63
5.6 SECURITY................................................................................................................. 65
5.7 SAVE & EXIT............................................................................................................ 65
6 SOFTWARE DRIVERS.............................................................................................. 67
6.1 AVAILABLE SOFTWARE DRIVERS .............................................................................. 68
6.2 ST ARTING THE DRIVER PROGRAM ............................................................................ 68
Page v
6.3 CHIPSET DRIVER INSTALLATION............................................................................... 70
6.4 VGA DRIVER INSTALLATION.................................................................................... 74
6.5 LAN DRIVER INSTALLATION.................................................................................... 78
6.6 AUDIO DRIVER INSTALLATION ................................................................................. 80
A BIOS OPTIONS .......................................................................................................... 83
B ONE KEY RECOVERY............................................................................................. 86
B.1 ONE KEY RECOVERY INTRODUCTION ...................................................................... 87
B.1.1 System Requirement......................................................................................... 88
B.1.2 Supported Operating System........................................................................... 89
B.2 SETUP PROCEDURE FOR WINDOWS.......................................................................... 90
B.2.1 Hardware and BIOS Setup .............................................................................. 91
B.2.2 Create Partitions............................................................................................. 91
B.2.3 Install Operating System, Drivers and Applications....................................... 95
ICE-CV-D25502/N26002 COM Express Module
B.2.4 Build-up Recovery Partition............................................................................ 96
B.2.5 Create Factory Default Image......................................................................... 98
B.3 AUTO RECOVERY SETUP PROCEDURE.................................................................... 103
B.4 SETUP PROCEDURE FOR LINUX.............................................................................. 108
B.5 RECOVERY TOOL FUNCTIONS .................................................................................111
B.5.1 Factory Restore..............................................................................................113
B.5.2 Backup System................................................................................................114
B.5.3 Restore Your Last Backup...............................................................................115
B.5.4 Manual............................................................................................................116
B.6 RESTORE SYSTEMS FROM A LINUX SERVER THROUGH LAN...................................117
B.6.1 Configure DHCP Server Settings...................................................................118
B.6.2 Configure TFTP Settings ................................................................................119
B.6.3 Configure One Key Recovery Server Settings............................................... 120
B.6.4 Start the DHCP, TFTP and HTTP................................................................. 121
B.6.5 Create Shared Directory................................................................................ 121
B.6.6 Setup a Client System for Auto Recovery...................................................... 122
B.7 OTHER INFORMATION ............................................................................................ 125
B.7.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller....................... 125
B.7.2 System Memory Requirement ........................................................................ 127
C TERMINOLOGY ..................................................................................................... 128
Page vi
ICE-CV-D25502/N26002 COM Express Module
D WA TCHDOG TIMER .............................................................................................. 132
E HAZARDOUS MATERIALS DISCLOSURE ....................................................... 135
E.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CER TIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY..................................... 136
Page vii
ICE-CV-D25502/N26002 COM Express Module
List of Figures
Figure 1-1: ICE-CV-D25502/N26002...............................................................................................2
Figure 1-2: Connectors ..................................................................................................................3
Figure 1-3: ICE-CV-D25502/N26002 Dimensions (mm)...............................................................4
Figure 1-4: Data Flow Diagram......................................................................................................5
Figure 3-1: Connectors ................................................................................................................13
Figure 3-2: COM Express Connector AB Location ...................................................................14
Figure 3-3: COM Express Connector CD Location ...................................................................19
Figure 3-4: SO-DIMM Connector Location.................................................................................23
Figure 3-5: SPI Flash Connector Location.................................................................................24
Figure 4-1: SO-DIMM Installation................................................................................................28
Figure 4-2: Connect the COM Express Connectors..................................................................30
Figure 4-3: Attach the Heat Sink to the Heatspreader Plate ....................................................30
Figure 4-4: Secure the Heatspreader Plate with the Heat Sink to the Baseboard.................31
Figure 6-1: Start Up Screen .........................................................................................................69
Figure 6-2: Drivers........................................................................................................................69
Figure 6-3: Chipset Driver Screen...............................................................................................70
Figure 6-4: Chipset Driver Welcome Screen..............................................................................71
Figure 6-5: Chipset Driver License Agreement.........................................................................72
Figure 6-6: Chipset Driver Read Me File ....................................................................................72
Figure 6-7: Chipset Driver Setup Operations ............................................................................73
Figure 6-8: Chipset Driver Installation Finish Screen...............................................................74
Figure 6-9: VGA Driver Welcome Screen...................................................................................75
Figure 6-10: VGA Driver License Agreement.............................................................................76
Figure 6-11: VGA Driver Read Me File........................................................................................76
Figure 6-12: VGA Driver Setup Operations................................................................................77
Figure 6-13: VGA Driver Installation Finish Screen..................................................................77
Figure 6-14: LAN Driver Welcome Screen .................................................................................78
Figure 6-15: LAN Driver Installation ...........................................................................................79
Figure 6-16: LAN Driver Installation Complete..........................................................................79
Figure 6-17: Audio Driver Installation File Extraction...............................................................80
Page viii
ICE-CV-D25502/N26002 COM Express Module
Figure 6-18: Audio Driver Welcome Screen...............................................................................81
Figure 6-19: Audio Driver Installation.........................................................................................81
Figure 6-20: Audio Driver Installation Complete.......................................................................82
Figure B-1: IEI One Key Recovery Tool Menu...........................................................................87
Figure B-2: Launching the Recovery Tool.................................................................................92
Figure B-3: Recovery Tool Setup Menu .....................................................................................92
Figure B-4: Command Prompt ....................................................................................................93
Figure B-5: Partition Creation Commands.................................................................................94
Figure B-6: Launching the Recovery Tool.................................................................................96
Figure B-7: Manual Recovery Environment for Windows........................................................96
Figure B-8: Building the Recovery Partition..............................................................................97
Figure B-9: Press Any Key to Continue.....................................................................................97
Figure B-10: Press F3 to Boot into Recovery Mode..................................................................98
Figure B-11: Recovery Tool Menu ..............................................................................................98
Figure B-12: About Symantec Ghost Window...........................................................................99
Figure B-13: Symantec Ghost Path ............................................................................................99
Figure B-14: Select a Local Source Drive ............................................................................... 100
Figure B-15: Select a Source Partition from Basic Drive ...................................................... 100
Figure B-16: File Name to Copy Image to ............................................................................... 101
Figure B-17: Compress Image.................................................................................................. 101
Figure B-18: Image Creation Confirmation............................................................................. 102
Figure B-19: Image Creation Complete................................................................................... 102
Figure B-20: Image Creation Complete................................................................................... 102
Figure B-21: Press Any Key to Continue................................................................................ 103
Figure B-22: Auto Recovery Utility.......................................................................................... 104
Figure B-23: Disable Automatically Restart............................................................................ 104
Figure B-24: Launching the Recovery Tool............................................................................ 105
Figure B-25: Auto Recovery Environment for Windows ....................................................... 105
Figure B-26: Building the Auto Recovery Partition................................................................ 106
Figure B-27: Factory Default Image Confirmation ................................................................. 106
Figure B-28: Image Creation Complete................................................................................... 107
Figure B-29: Press any key to continue.................................................................................. 107
Figure B-30: IEI Feature ............................................................................................................ 108
Figure B-31: Partitions for Linux.............................................................................................. 109
Figure B-32: System Configuration for Linux......................................................................... 110
Page ix
Figure B-33: Access menu.lst in Linux (Text Mode).............................................................. 110
Figure B-34: Recovery Tool Menu ........................................................................................... 111
Figure B-35: Recovery Tool Main Menu.................................................................................. 112
Figure B-36: Restore Factory Default...................................................................................... 113
Figure B-37: Recovery Complete Window.............................................................................. 113
Figure B-38: Backup System.................................................................................................... 114
Figure B-39: System Backup Complete Window ................................................................... 114
Figure B-40: Restore Backup................................................................................................... 115
Figure B-41: Restore System Backup Complete Window..................................................... 115
Figure B-42: Symantec Ghost Window ................................................................................... 116
Figure B-43: Disable Automatically Restart............................................................................ 123
ICE-CV-D25502/N26002 COM Express Module
Page x
ICE-CV-D25502/N26002 COM Express Module
List of Tables
Table 1-1: ICE-CV-D25502/N26002 Model Variations..................................................................2
Table 1-2: ICE-CV-D25502/N26002 Specifications.......................................................................7
Table 2-1: Packing List.................................................................................................................11
Table 2-2: Optional Items.............................................................................................................11
Table 3-1: Peripheral Interface Connectors...............................................................................14
Table 3-2: COM Express Connector AB Pin Definitions...........................................................18
Table 3-3: COM Express Connector CD Pin Definitions...........................................................22
Table 3-4: SPI Flash Connector Pinouts ....................................................................................24
Table 5-1: BIOS Navigation Keys................................................................................................34
Page xi
ICE-CV-D25502/N26002 COM Express Module
BIOS Menus
BIOS Menu 1: Main.......................................................................................................................35
BIOS Menu 2: Advanced..............................................................................................................36
BIOS Menu 3: ACPI Settings .......................................................................................................37
BIOS Menu 4: RTC Wake Settings..............................................................................................38
BIOS Menu 5: Trusted Computing..............................................................................................39
BIOS Menu 6: CPU Configuration...............................................................................................40
BIOS Menu 7: IDE Configuration.................................................................................................41
BIOS Menu 8: USB Configuration...............................................................................................42
BIOS Menu 9: iWDD H/W Monitor ...............................................................................................43
BIOS Menu 10: Secondary Super IO Configuration..................................................................44
BIOS Menu 11: COM n Configuration Menu ..............................................................................44
BIOS Menu 12: Super IO Configuration......................................................................................48
BIOS Menu 13: Floppy Disk Controler Configuration Menu ....................................................49
BIOS Menu 14: COM n Configuration Menu ..............................................................................50
BIOS Menu 15: Parallel Port Configuration Menu.....................................................................53
BIOS Menu 16: WinBond W83627EHG Hardware Monitor .......................................................55
BIOS Menu 17: Serial Port Console Redirection.......................................................................56
BIOS Menu 18: iEi Feature...........................................................................................................58
BIOS Menu 19: Chipset................................................................................................................59
BIOS Menu 20: Host Bridge Configuration................................................................................60
BIOS Menu 21: Intel IGD Configuration......................................................................................60
BIOS Menu 22: Southbridge Configuration ...............................................................................62
BIOS Menu 23: Boot.....................................................................................................................63
BIOS Menu 24: Security...............................................................................................................65
BIOS Menu 25: Save & Exit..........................................................................................................66
ICE-CV-D25502/N26002
Page xii
ICE-CV-D25502/N26002 COM Express Module
1 Introduction
Chapter
1
Page 1
1.1 Introduction
Figure 1-1: ICE-CV-D25502/N26002
ICE-CV-D25502/N26002 COM Express Module
The ICE-CV-D25502/N26002 COM Express module provides the main processing chips
and is connected to a compatible COM Express baseboard. The ICE-CV-D25502/N26002
is equipped with an Intel® Atom™ D2550/N2600 CPU and Intel® NM10 PCH. The COM
Express standard allows the COM Express baseboard to be designed, while leaving the
choice of processor till the later stages of design. The ICE-CV-D25502/N26002 provides a
low power option with the full range of modern I/O options. The ICE-CV-D25502/N26002
embedded module is designed for flexible integration by system developers into
customized platform devices.
1.2 Model Variations
The model variations of the ICE-CV-D25502/N26002 are listed below.
Model No. CPU
ICE-CV-D25502-R10
ICE-CV-N26002-R10
Table 1-1: ICE-CV-D25502/N26002 Model Variations
1.86 GHz Intel® Atom™ D2550
1.6 GHz Intel® Atom™ N2600
Page 2
ICE-CV-D25502/N26002 COM Express Module
1.3 Features
Some of the ICE-CV-D25502/N26002 COM Express module features are listed below:
Complies with COM Express form factor
Embedded Intel® Atom™ D2550/N2600 CPU and Intel® NM10 PCH
Supports DDR3/DDR3L (1.35V) SO-DIMM
Supports 18-/24-bit single-channel LVDS and analog CRT (VGA)
Supports SATA 3Gb/s and GbE
Supports eight USB 2.0 devices
RoHS compliant
1.4 Connectors
The connectors on the ICE-CV-D25502/N26002 are shown in the figure below.
Figure 1-2: Connectors
Page 3
1.5 Dimensions
The main dimensions of the ICE-CV-D25502/N26002 are shown in the diagram belo w.
ICE-CV-D25502/N26002 COM Express Module
Page 4
Figure 1-3: ICE-CV-D25502/N26002 Dimensions (mm)
ICE-CV-D25502/N26002 COM Express Module
1.6 Data Flow
4Figure 1-4 shows the data flow between the system chipset, the CPU and other
components installed on the motherboard.
Figure 1-4: Data Flow Diagram
Page 5
ICE-CV-D25502/N26002 COM Express Module
1.7 Technical Specifications
The ICE-CV-D25502/N26002 technical specifications are listed below.
Specifications/Model ICE-CV-D25502/N26002
Form Factor
CPU
PCH
Memory
Graphics Engine
Display
(Signal to Baseboard)
PICMG COM Express R2.0 Type 2 for compact size (95 mm x 95 mm)
10 layers
1.86 GHz Intel® Atom™ D2550 dual-cor e CPU (2 x 512KB L2 cache)
1.6 GHz Intel® Atom™ N2600 dual-core CPU (2 x 512KB L2 cache)
Intel® NM10
D2550: One 1066 MHz DDR3/DDR3L (1.35V) SO-DIMM support (up to
4 GB)
N2600: One 800 MHz DDR3/DDR3L (1.35V) SO-DIMM support (up to
2 GB)
D2550: Intel® GMA 3650 with 640 MHz graphics core speed
N2600: Intel® GMA 3600 with 400 MHz graphics core speed
Supports DirectX 9 and Blu-ray 2.0
MPEG2, H.264, VC-1 and 1080p decoding
One VGA is integrate d in the CPU
One LVDS is integrated in the CPU:
D2550: 24-bit single-channel LVDS
Ethernet
BIOS
Embedded Controller
Watchdog Timer
Expansion
(Signal to Baseboard)
Page 6
N2600: 18-bit single-channel LVDS
Realtek RTL8111E PCIe GbE controller
UEFI BIOS
iWDD
Software programmable supports 1~2 55 sec. system reset
Three PCIe x1
Supports PCI
ICE-CV-D25502/N26002 COM Express Module
Specifications/Model ICE-CV-D25502/N26002
Eight USB 2.0
Two SATA 3Gb/s
Two UAR T (by EC)
HD Audio
I/O Interfaces
(Signal to Baseboard)
GPIO
SMBus
I2C
LPC
SPI
Power Consumption
Operating
Temperature
Storage Temperature
Humidity (Operating)
Dimensions
Weight (GW/NW)
Table 1-2: ICE-CV-D25502/N26002 Specifications
+12V @ 0.45 A , Vcore_12V @ 1.0A (1.86 GHz Intel® Atom™ D2550
CPU with 2 GB 1066 MHz DDR3 SO-DIMM)
-10ºC ~ 60ºC
-20ºC ~ 70ºC
5% ~ 95% (non-condensing)
95 mm x 95 mm
600 g/200 g
Page 7
ICE-CV-D25502/N26002 COM Express Module
Chapter
2
2 Packing List
Page 8
ICE-CV-D25502/N26002 COM Express Module
2.1 Anti-static Precautions
WARNING!
Static electricity can destroy certain electronics. Make sure to follow the
ESD precautions to prevent damage to the product, and injury to the
user.
Make sure to adhere to the following guidelines:
Wear an anti-static wristband: Wearing an anti-static wristband can prevent
electrostatic discharge.
Self-grounding: Touch a grounded conductor every few minutes to discharge
any excess static buildup.
Use an anti-static pad: When configuring any circuit board, place it on an
anti-static mat.
Only handle the edges of the PCB: Don't touch the surface of the
motherboard. Hold the motherboard by the edges when handling.
2.2 Unpacking Precautions
When the ICE-CV-D25502/N26002 is unpacked, please do the following:
Follow the antistatic guidelines above.
Make sure the packing box is facing upwards whe n opening.
Make sure all the packing list items are present.
Page 9
2.3 Packing List
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
ICE-CV-D25502/N26002 was purchased from or contact an IEI sales
representative directly by sending an email to 32sales@iei.com.tw.
The ICE-CV-D25502/N26002 is shipped with the following components:
Quantity Item and Part Number Image
1 ICE-CV-D25502/N26002
ICE-CV-D25502/N26002 COM Express Module
1 Heatspreader plate
1 Heat sink
1 One Key Recovery CD
1 Utility CD
Page 10
ICE-CV-D25502/N26002 COM Express Module
Quantity Item and Part Number Image
1 Quick Installation Guide
Table 2-1: Packing List
2.4 Optional Items
The following are optional components which may be separately purchased:
Item and Part Number Image
Baseboard for COM Express Type 2 modules
(P/N: ICE-DB-9S-R10)
Table 2-2: Optional Items
Page 11
ICE-CV-D25502/N26002 COM Express Module
Chapter
3
3 Connectors
Page 12
ICE-CV-D25502/N26002 COM Express Module
3.1 Peripheral Interface Connectors
This chapter details all the connectors.
3.1.1 ICE-CV -D25502/N26002 Layout
The figure below shows all the connectors.
Figure 3-1: Connectors
Page 13
ICE-CV-D25502/N26002 COM Express Module
3.1.2 Peripheral Interface Connectors
The table below lists all the connectors on the ICE-CV-D25502/N26002.
Connector Type Label
COM Express connector AB COM Express connector J1
COM Express connector CD COM Express connector J2
SO-DIMM connector SO-DIMM connector DIMM1
SPI connector 6-pin connector SPI1
Table 3-1: Peripheral Interface Connectors
3.2 Internal Peripheral Connectors
The section describes all of the connectors on the ICE-CV-D25502/N26002.
3.2.1 COM Express Connector AB
CN Label: J1
CN Type:
CN Location:
CN Pinouts:
The standard COM Express connector AB location and pinout s are shown below.
220-pin COM Express connector
See Figure 3-2
See Table 3-2
Page 14
Figure 3-2: COM Express Connector AB Location
ICE-CV-D25502/N26002 COM Express Module
Pin No. Description Pin No. Description
A1 GND0 B1 GND15
A2 GBE0_MDI3- B2 GBE0_ACT#
A3 GBE0_MDI3+ B3 LPC_FRAME#
A4 GBE0_LINK100# B4 LPC_AD0
A5 GBE0_LINK1000# B5 LPC_AD1
A6 GBE0_MDI2- B6 LPC_AD2
A7 GBE0_MDI2+ B7 LPC_AD3
A8 GBE0_LINK# B8 LPC_DRQ0#
A9 GBE0_MDI1- B9 LPC_DRQ1#
A10 GBE0_MDI1+ B10 LPC_CLK
A11 GND1 B11 GND16
A12 GBE0_MDI0- B12 PWRBTN#
A13 GBE0_MDI0+ B13 SMB_CK
A14 GBE0_CTREF B14 SMB_DAT
A15 SUS_S3# B15 SMB_ALERT#
A16 SATA0_TX+ B16 SATA1_TX+
A17 SATA0_TX- B17 SATA1_TXA18 SUS_S4# B18 SUS_STAT#
A19 SATA0_RX+ B19 SATA1_RX+
A20 SATA0_RX- B20 SATA1_RXA21 GND2 B21 GND17
A22 RSVD B22 RSVD
A23 RSVD B23 RSVD
A24 SUS_S5# B24 PWR_OK
A25 RSVD B25 RSVD
A26 RSVD B26 RSVD
A27 BATLOW# B27 WDT
A28 ATA_ACT# B28 AC/HD_SDIN2
A29 AC/HD_SYNC B29 AC/HD_SDIN1
A30 AC/HD_RST# B30 AC/HD_SDIN0
A31 GND3 B31 GND18
A32 AC/HD_BITCLK B32 SPKR
Page 15
Pin No. Description Pin No. Description
A33 AC/HD_SDOUT B33 I2C_CK
A34 BIOS_DISABLE# B34 I2C_DAT
A35 THRMTRIP# B35 THRM#
A36 USB6- B36 USB7A37 USB6+ B37 USB7+
A38 USB_6_7_OC# B38 USB_4_5_OC#
A39 USB4- B39 USB5A40 USB4+ B40 USB5+
A41 GND4 B41 GND19
A42 USB2- B42 USB3A43 USB2+ B43 USB3+
A44 USB_2_3_OC# B44 USB_0_1_OC#
A45 USB0- B45 USB1-
ICE-CV-D25502/N26002 COM Express Module
A46 USB0+ B46 USB1+
A47 VCC_RTC B47 EXCD1_PERST#
A48 EXCD0_PERST# B48 EXCD1_CPPE#
A49 EXCD0_CPPE# B49 SYS_RESET#
A50 LPC_SERIRQ B50 CB_RESET#
A51 GND5 B51 GND20
A52 RSVD B52 RSVD
A53 RSVD B53 RSVD
A54 GPI0 B54 GPO1
A55 RSVD B55 RSVD
A56 RSVD B56 RSVD
A57 GND6 B57 GPO2
A58 RSVD B58 RSVD
A59 RSVD B59 RSVD
A60 GND7 B60 GND21
A61 PCIE_TX2+ B61 PCIE_RX2+
Page 16
A62 PCIE_TX2- B62 PCIE_RX2A63 GPI1 B63 GPO3
A64 PCIE_TX1+ B64 PCIE_RX1+
ICE-CV-D25502/N26002 COM Express Module
Pin No. Description Pin No. Description
A65 PCIE_TX1- B65 PCIE_RX1A66 GND8 B66 WAKE0#
A67 GPI2 B67 WAKE1#
A68 PCIE_TX0+ B68 PCIE_RX0+
A69 PCIE_TX0- B69 PCIE_RX0A70 GND9 B70 GND22
A71 LVDS_A0+ B71 RSVD
A72 LVDS_A0- B72 RSVD
A73 LVDS_A1+ B73 RSVD
A74 LVDS_A1- B74 RSVD
A75 LVDS_A2+ B75 RSVD
A76 LVDS_A2- B76 RSVD
A77 LVDS_VDD_EN B77 RSVD
A78 LVDS_A3+ B78 RSVD
A79 LVDS_A3- B79 LVDS_BKLT_EN
A80 GND10 B80 GND23
A81 LVDS_A_CLK+ B81 RSVD
A82 LVDS_A_CLK- B82 RSVD
A83 LVDS_I2C_CK B83 LVDS_BKLT_CTRL
A84 LVDS_I2C_DAT B84 VCC5SBY1
A85 GPI3 B85 VCC5SBY2
A86 RSVD B86 VCC5SBY3
A87 RSVD B87 VCC5SBY4
A88 PCIE0_CK_REF+ B88 BIOS_DIS1#
A89 PCIE0_CK_REF- B89 VGA_RED
A90 GND11 B90 GND24
A91 SPI_VCC B91 VGA_GRN
A92 SPI_MISO B92 VGA_BLU
A93 GPO0 B93 VGA_HSYNC
A94 SPI_CLK B94 VGA_VSYNC
A95 SPI_MOSI B95 VGA_I2C_CK
A96 PP_TPM B96 VGA_I2C_DAT
Page 17
Pin No. Description Pin No. Description
A97 RSVD B97 SPI_CS#
A98 RSVD B98 RSVD
A99 RSVD B99 RSVD
A100 GND13 B100 GND25
A101 RSVD B101 FAN_PWMOUT
A102 RSVD B102 FAN_TACHIN
A103 LID# B103 SLEEP#
A104 VCC_12V7 B104 VCC_12V16
A105 VCC_12V8 B105 VCC_12V17
A106 VCC_12V9 B106 VCC_12V18
A107 VCC_12V10 B107 VCC_12V19
A108 VCC_12V11 B108 VCC_12V20
A109 VCC_12V12 B109 VCC_12V21
ICE-CV-D25502/N26002 COM Express Module
A110 GND14 B110 GND26
Table 3-2: COM Express Connector AB Pin Definitions
3.2.2 COM Express Connector CD
CN Label: J2
CN Type:
CN Location:
CN Pinouts:
The standard COM Express connector CD location and pino uts are shown below.
220-pin COM Express connector
Figure 3-3
See
Table 3-3
See
Page 18
Loading...