KINO-CV-D25501/N26001 SBC
MODEL:
KINO-CV-D25501/N26001
Mini-ITX SBC with Intel®Atom D2550/N2600 Processor
Up to 4.0 GB DDR3, VGA, HDMI, Dual LVDS, Dual GbE,
SATA 3Gb/s, USB 3.0, microSD, PCIe Mini, RoHS
User Manual
Rev. 1.02 – May 12, 2014
Page i
KINO-CV-D25501/N26001 SBC
Revision
Date Version Changes
May 12, 2014 1.02 Modified Table 3-24: LAN Pinouts
October 8, 2013 1.01 Updated the dual USB cable information in the packing
list.
July 23, 2012 1.00 Initial release
Page ii
KINO-CV-D25501/N26001 SBC
COPYRIGHT NOTICE
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the part
of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
Copyright
reserved. No part of this manual may be reproduced by any mechanical, electronic, or
other means in any form without prior written permission of the manufacturer.
TRADEMARKS
All registered trademarks and product names mentioned herein are used for identification
purposes only and may be trademarks and/or registered trademarks of their respective
owners.
Page iii
KINO-CV-D25501/N26001 SBC
Table of Contents
1 INTRODUCTION.......................................................................................................... 1
1.1 INTRODUCTION........................................................................................................... 2
1.2 BENEFITS ................................................................................................................... 3
1.3 FEATURES................................................................................................................... 3
1.4 CONNECTORS ............................................................................................................. 4
1.5 DIMENSIONS............................................................................................................... 5
1.6 DATA FLOW................................................................................................................ 6
1.7 TECHNICAL SPECIFICATIONS ...................................................................................... 7
2 PACKING LIST........................................................................................................... 10
2.1 ANTI-STATIC PRECAUTIONS.......................................................................................11
2.2 UNPACKING PRECAUTIONS........................................................................................11
2.3 PACKING LIST........................................................................................................... 12
2.4 OPTIONAL ITEMS...................................................................................................... 13
3 CONNECTOR PINOUTS........................................................................................... 14
3.1 PERIPHERAL INTERFACE CONNECTORS..................................................................... 15
3.1.1 Layout .............................................................................................................. 15
3.1.2 Peripheral Interface Connectors ..................................................................... 16
3.1.3 External Interface Panel Connectors............................................................... 17
3.2 INTERNAL PERIPHERAL CONNECTORS...................................................................... 17
3.2.1 Battery Connector............................................................................................ 18
3.2.2 Digital I/O Connector...................................................................................... 19
3.2.3 Fan Connectors................................................................................................ 20
3.2.4 Front Audio Connector.................................................................................... 20
3.2.5 Front Panel Connector.................................................................................... 21
3.2.6 Keyboard/Mouse Connector............................................................................ 22
3.2.7 LVDS Connector (LVDS1) ............................................................................... 23
3.2.8 LVDS Connector (LVDS2) ............................................................................... 24
3.2.9 LVDS Backlight Connectors............................................................................ 26
3.2.10 microSD Card Slot ......................................................................................... 26
Page iv
KINO-CV-D25501/N26001 SBC
3.2.11 PCIe Mini Card Slot....................................................................................... 27
3.2.12 Power Connector (9 V–28 V)......................................................................... 29
3.2.13 Power Button ................................................................................................. 30
3.2.14 RS-232 Serial Port Connectors (COM3, COM5, COM6) ............................. 31
3.2.15 RS-422/485 Serial Port Connector (COM4).................................................. 32
3.2.16 SATA Drive Connectors ................................................................................. 33
3.2.17 SATA Power Connectors................................................................................ 34
3.2.18 SMBus Connector .......................................................................................... 35
3.2.19 SO-DIMM Connector..................................................................................... 36
3.2.20 SPDIF Connector........................................................................................... 37
3.2.21 SPI Flash Connector...................................................................................... 38
3.2.22 USB 2.0 Connectors....................................................................................... 39
3.3 EXTERNAL INTERFACE CONNECTORS ....................................................................... 40
3.3.1 Audio Connector .............................................................................................. 40
3.3.2 Ethernet and USB Connector........................................................................... 41
3.3.3 HDMI Connector............................................................................................. 42
3.3.4 Power Connector (9 V–28 V, Power Adapter)................................................. 43
3.3.5 Serial Port Connectors (COM1, COM2)......................................................... 43
3.3.6 VGA Connector................................................................................................ 44
4 INSTALLATION ......................................................................................................... 46
4.1 ANTI-STATIC PRECAUTIONS...................................................................................... 47
4.2 INSTALLATION CONSIDERATIONS.............................................................................. 48
4.3 SO-DIMM INSTALLATION ....................................................................................... 49
4.4 PCIE MINI CARD INSTALLATION .............................................................................. 50
4.5 JUMPER SETTINGS .................................................................................................... 51
4.5.1 AT/ATX Mode Selection................................................................................... 51
4.5.2 Clear CMOS Jumper........................................................................................ 52
4.5.3 LVDS1 Voltage Selection.................................................................................. 53
4.5.4 LVDS2 Voltage Selection.................................................................................. 54
4.5.5 LVDS2 Resolution Selection............................................................................ 55
4.5.6 PCIe Mini/mSATA Mode Selection .................................................................. 56
4.6 CHASSIS INSTALLATION............................................................................................ 57
4.6.1 Airflow.............................................................................................................. 57
4.6.2 Motherboard Installation................................................................................. 57
Page v
4.7 INTERNAL PERIPHERAL DEVICE CONNECTIONS........................................................ 58
4.7.1 SATA Drive Connection ................................................................................... 58
4.7.2 USB Cable (Dual Port) Connection ................................................................ 59
4.7.3 Keyboard/Mouse Connector (Optional).......................................................... 60
4.8 EXTERNAL PERIPHERAL INTERFACE CONNECTION ................................................... 61
4.8.1 Audio Connector .............................................................................................. 61
4.8.2 HDMI Display Device Connection.................................................................. 62
4.8.3 LAN Connection (Single Connector)............................................................... 63
4.8.4 Serial Device Connection ................................................................................ 64
4.8.5 USB Connection............................................................................................... 65
4.8.6 VGA Monitor Connection ................................................................................ 66
4.9 SOFTWARE INSTALLATION........................................................................................ 67
5 BIOS.............................................................................................................................. 70
5.1 INTRODUCTION......................................................................................................... 71
KINO-CV-D25501/N26001 SBC
5.1.1 Starting Setup................................................................................................... 71
5.1.2 Using Setup...................................................................................................... 71
5.1.3 Getting Help..................................................................................................... 72
5.1.4 Unable to Reboot After Configuration Changes.............................................. 72
5.1.5 BIOS Menu Bar................................................................................................ 72
5.2 MAIN........................................................................................................................ 73
5.3 ADVANCED............................................................................................................... 74
5.3.1 ACPI Configuration......................................................................................... 75
5.3.2 RTC Wake Settings........................................................................................... 76
5.3.3 CPU Configuration.......................................................................................... 77
5.3.4 IDE Configuration........................................................................................... 79
5.3.5 USB Configuration........................................................................................... 80
5.3.6 F81866 Super IO Configuration...................................................................... 81
5.3.6.1 Serial Port n Configuration....................................................................... 82
5.3.7 F81866 H/W Monitor....................................................................................... 88
5.3.7.1 Smart Fan Mode Configuration................................................................ 89
5.3.8 Serial Port Console Redirection...................................................................... 90
5.3.9 IEI Feature....................................................................................................... 91
5.4 CHIPSET ................................................................................................................... 92
5.4.1 Host Bridge...................................................................................................... 93
Page vi
KINO-CV-D25501/N26001 SBC
5.4.1.1 Intel IGD Configuration............................................................................ 94
5.4.2 South Bridge..................................................................................................... 95
5.5 BOOT........................................................................................................................ 97
5.6 SECURITY................................................................................................................. 99
5.7 EXIT......................................................................................................................... 99
A BIOS OPTIONS ........................................................................................................ 101
B ONE KEY RECOVERY........................................................................................... 104
B.1 ONE KEY RECOVERY INTRODUCTION .................................................................... 105
B.1.1 System Requirement....................................................................................... 106
B.1.2 Supported Operating System......................................................................... 107
B.2 SETUP PROCEDURE FOR WINDOWS........................................................................ 108
B.2.1 Hardware and BIOS Setup ............................................................................ 109
B.2.2 Create Partitions........................................................................................... 109
B.2.3 Install Operating System, Drivers and Applications......................................113
B.2.4 Building the Recovery Partition.....................................................................114
B.2.5 Create Factory Default Image........................................................................116
B.3 AUTO RECOVERY SETUP PROCEDURE.................................................................... 121
B.4 SETUP PROCEDURE FOR LINUX.............................................................................. 126
B.5 RECOVERY TOOL FUNCTIONS ................................................................................ 129
B.5.1 Factory Restore............................................................................................. 131
B.5.2 Backup System............................................................................................... 132
B.5.3 Restore Your Last Backup.............................................................................. 133
B.5.4 Manual........................................................................................................... 134
B.6 RESTORE SYSTEMS FROM A LINUX SERVER THROUGH LAN.................................. 135
B.6.1 Configure DHCP Server Settings.................................................................. 136
B.6.2 Configure TFTP Settings ............................................................................... 137
B.6.3 Configure One Key Recovery Server Settings............................................... 138
B.6.4 Start the DHCP, TFTP and HTTP................................................................. 139
B.6.5 Create Shared Directory................................................................................ 139
B.6.6 Setup a Client System for Auto Recovery...................................................... 140
B.7 OTHER INFORMATION ............................................................................................ 143
B.7.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller....................... 143
B.7.2 System Memory Requirement ........................................................................ 145
Page vii
C TERMINOLOGY ..................................................................................................... 146
D HAZARDOUS MATERIALS DISCLOSURE ....................................................... 150
D.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS
ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY..................................... 151
KINO-CV-D25501/N26001 SBC
Page viii
KINO-CV-D25501/N26001 SBC
List of Figures
Figure 1-1: KINO-CV-D25501/N26001............................................................................................2
Figure 1-2: Connectors ..................................................................................................................4
Figure 1-3: Dimensions (mm)........................................................................................................5
Figure 1-4: Data Flow Diagram......................................................................................................6
Figure 3-1: Connector and Jumper Locations...........................................................................15
Figure 3-2: Battery Connector Location.....................................................................................18
Figure 3-3: Digital I/O Connector Location ................................................................................19
Figure 3-4: Fan Connector Locations.........................................................................................20
Figure 3-5: Front Audio Connector Location.............................................................................21
Figure 3-6: Front Panel Connector Location .............................................................................22
Figure 3-7: Keyboard/Mouse Connector Location....................................................................23
Figure 3-8: LVDS1 Connector Location......................................................................................24
Figure 3-9: LVDS2 Connector Location......................................................................................25
Figure 3-10: LVDS Backlight Inverter Connectors....................................................................26
Figure 3-11: microSD Slot Location............................................................................................27
Figure 3-12: PCIe Mini Card Slot Location.................................................................................28
Figure 3-13: ATX Power Connector Location............................................................................30
Figure 3-14: Power Button Location...........................................................................................30
Figure 3-15: RS-232 Serial Port Connector Location................................................................31
Figure 3-16: RS-422/485 Serial Port Connector Location.........................................................32
Figure 3-17: SATA Drive Connector Location...........................................................................34
Figure 3-18: SATA Power Connector Locations .......................................................................35
Figure 3-19: SMBus Connector Location...................................................................................36
Figure 3-20: SO-DIMM Connector Location...............................................................................37
Figure 3-21: SPDIF Connector Location ....................................................................................37
Figure 3-22: SPI Flash Connector Location...............................................................................38
Figure 3-23: USB Connector Locations......................................................................................39
Figure 3-24: External Interface Connectors...............................................................................40
Figure 3-25: Audio Connector.....................................................................................................40
Figure 3-26: Ethernet Connector.................................................................................................41
Page ix
Figure 3-27: HDMI Connector......................................................................................................42
Figure 3-28: 4-pin Power DIN Connection..................................................................................43
Figure 3-29: Serial Port Pinout Locations..................................................................................44
Figure 3-30: VGA Connector .......................................................................................................45
Figure 4-1: SO-DIMM Installation................................................................................................49
Figure 4-2: PCIe Mini Card Installation.......................................................................................50
Figure 4-3: AT/ATX Mode Selection Jumper Location..............................................................52
Figure 4-4: Clear CMOS Jumper Location .................................................................................53
Figure 4-5: LVDS1 Voltage Selection Jumper Location ...........................................................54
Figure 4-6: LVDS2 Voltage Selection Jumper Location ...........................................................55
Figure 4-7: LVDS2 Resolution Selection Jumper Location......................................................56
Figure 4-8: PCIe Mini/mSATA Mode Selection Jumper Location............................................57
Figure 4-9: SATA Drive Cable Connection.................................................................................58
Figure 4-10: Dual USB Cable Connection..................................................................................59
KINO-CV-D25501/N26001 SBC
Figure 4-11: Keyboard/mouse Y-cable Connection..................................................................60
Figure 4-12: Audio Connector.....................................................................................................62
Figure 4-13: HDMI Connection....................................................................................................63
Figure 4-14: LAN Connection......................................................................................................64
Figure 4-15: Serial Device Connector.........................................................................................65
Figure 4-16: USB Connector........................................................................................................66
Figure 4-17: VGA Connector .......................................................................................................67
Figure 4-18: Introduction Screen................................................................................................68
Figure 4-19: Available Drivers.....................................................................................................68
Figure B-1: IEI One Key Recovery Tool Menu........................................................................ 105
Figure B-2: Launching the Recovery Tool.............................................................................. 110
Figure B-3: Recovery Tool Setup Menu .................................................................................. 110
Figure B-4: Command Prompt ................................................................................................. 111
Figure B-5: Partition Creation Commands.............................................................................. 112
Figure B-6: Launching the Recovery Tool.............................................................................. 114
Figure B-7: Manual Recovery Environment for Windows..................................................... 114
Figure B-8: Building the Recovery Partition........................................................................... 115
Figure B-9: Press Any Key to Continue.................................................................................. 115
Figure B-10: Press F3 to Boot into Recovery Mode............................................................... 116
Figure B-11: Recovery Tool Menu ........................................................................................... 116
Figure B-12: About Symantec Ghost Window........................................................................ 117
Page x
KINO-CV-D25501/N26001 SBC
Figure B-13: Symantec Ghost Path ......................................................................................... 117
Figure B-14: Select a Local Source Drive ............................................................................... 118
Figure B-15: Select a Source Partition from Basic Drive ...................................................... 118
Figure B-16: File Name to Copy Image to ............................................................................... 119
Figure B-17: Compress Image.................................................................................................. 119
Figure B-18: Image Creation Confirmation............................................................................. 120
Figure B-19: Creating Image..................................................................................................... 120
Figure B-20: Image Creation Complete................................................................................... 120
Figure B-21: Press Any Key to Continue................................................................................ 121
Figure B-22: Auto Recovery Utility.......................................................................................... 122
Figure B-23: Disable Automatically Restart............................................................................ 122
Figure B-24: Launching the Recovery Tool............................................................................ 123
Figure B-25: Auto Recovery Environment for Windows ....................................................... 123
Figure B-26: Building the Auto Recovery Partition................................................................ 124
Figure B-27: Factory Default Image Confirmation ................................................................. 124
Figure B-28: Creating Image..................................................................................................... 125
Figure B-29: Press Any Key to Continue................................................................................ 125
Figure B-30: IEI Feature BIOS Menu........................................................................................ 126
Figure B-31: Partitions for Linux.............................................................................................. 127
Figure B-32: Manual Recovery Environment for Linux ......................................................... 128
Figure B-33: Access menu.lst in Linux (Text Mode).............................................................. 128
Figure B-34: Recovery Tool Menu ........................................................................................... 129
Figure B-35: Recovery Tool Main Menu.................................................................................. 130
Figure B-36: Restore Factory Default...................................................................................... 131
Figure B-37: Recovery Complete Window.............................................................................. 131
Figure B-38: Backup System.................................................................................................... 132
Figure B-39: System Backup Complete Window ................................................................... 132
Figure B-40: Restore Backup................................................................................................... 133
Figure B-41: Restore System Backup Complete Window..................................................... 133
Figure B-42: Symantec Ghost Window ................................................................................... 134
Figure B-43: Disable Automatically Restart............................................................................ 141
Page xi
KINO-CV-D25501/N26001 SBC
List of Tables
Table 1-1: Technical Specifications..............................................................................................9
Table 2-1: Packing List.................................................................................................................13
Table 2-2: Optional Items.............................................................................................................13
Table 3-1: Peripheral Interface Connectors...............................................................................17
Table 3-2: Rear Panel Connectors..............................................................................................17
Table 3-3: Battery Connector Pinouts........................................................................................18
Table 3-4: Digital I/O Connector Pinouts....................................................................................19
Table 3-5: Fan Connector Pinouts..............................................................................................20
Table 3-6: Front Audio Connector Pinouts................................................................................21
Table 3-7: Front Panel Connector Pinouts.................................................................................22
Table 3-8: Keyboard/Mouse Connector Pinouts .......................................................................23
Table 3-9: LVDS1 Connector Pinouts.........................................................................................24
Table 3-10: LVDS2 Connector Pinouts.......................................................................................25
Table 3-11: Backlight Inverter Connector Pinouts....................................................................26
Table 3-12: microSD Slot Connector Pinouts............................................................................27
Table 3-13: PCIe Mini Card Slot Pinouts ....................................................................................29
Table 3-14: Power Connector Pinouts........................................................................................30
Table 3-15: Serial Port Connector Pinouts ................................................................................31
Table 3-16: RS-422/485 Serial Port Connector Pinouts............................................................32
Table 3-17: D-sub 9 RS-422/485 Pinouts....................................................................................33
Table 3-18: SATA Drive Connector Pinouts...............................................................................34
Table 3-19: SATA Power Connector Pinouts.............................................................................35
Table 3-20: SMBus Connector Pinouts ......................................................................................36
Table 3-21: SPDIF Connector Pinouts........................................................................................38
Table 3-22: SPI Flash Connector Pinouts ..................................................................................38
Table 3-23: USB Port Connector Pinouts...................................................................................39
Table 3-24: LAN Pinouts ..............................................................................................................41
Table 3-25: Connector LEDs........................................................................................................41
Table 3-26: USB Port Pinouts......................................................................................................42
Table 3-27: HDMI Connector Pinouts .........................................................................................42
Page xii
KINO-CV-D25501/N26001 SBC
Table 3-28: Serial Port Pinouts....................................................................................................43
Table 3-29: VGA Connector Pinouts...........................................................................................44
Table 4-1: Jumpers.......................................................................................................................51
Table 4-2: AT/ATX Mode Selection .............................................................................................52
Table 4-3: Clear CMOS Jumper Settings....................................................................................53
Table 4-4: LVDS1 Voltage Selection...........................................................................................54
Table 4-5: LVDS2 Voltage Selection...........................................................................................54
Table 4-6: LVDS2 Resolution Selection .....................................................................................56
Table 4-7: PCIe Mini/mSATA Mode Selection............................................................................56
Table 5-1: BIOS Navigation Keys................................................................................................72
Page xiii
KINO-CV-D25501/N26001 SBC
BIOS Menus
BIOS Menu 1: Main.......................................................................................................................73
BIOS Menu 2: Advanced..............................................................................................................74
BIOS Menu 3: ACPI Configuration..............................................................................................75
BIOS Menu 4: RTC Wake Settings..............................................................................................76
BIOS Menu 5: CPU Configuration...............................................................................................77
BIOS Menu 6: IDE Configuration.................................................................................................79
BIOS Menu 7: USB Configuration...............................................................................................80
BIOS Menu 8: Super IO Configuration........................................................................................81
BIOS Menu 9: Serial Port n Configuration Menu.......................................................................82
BIOS Menu 10: Hardware Health Configuration........................................................................88
BIOS Menu 11: FAN 1 Configuration..........................................................................................89
BIOS Menu 12: Serial Port Console Redirection.......................................................................91
BIOS Menu 13: IEI Feature...........................................................................................................92
BIOS Menu 14: Chipset................................................................................................................93
BIOS Menu 15: Host Bridge Configuration................................................................................93
BIOS Menu 16: Intel IGD SWSCI OpRegion ...............................................................................94
BIOS Menu 17: Southbridge Chipset Configuration.................................................................96
BIOS Menu 18: Boot.....................................................................................................................97
BIOS Menu 19: Security...............................................................................................................99
BIOS Menu 20: Exit.................................................................................................................... 100
Page xiv
KINO-CV-D25501/N26001 SBC
Chapter
1
1 Introduction
Page 1
1.1 Introduction
KINO-CV-D25501/N26001 SBC
Figure 1-1: KINO-CV-D25501/N26001
The KINO-CV-D25501/N26001 is a Mini-ITX SBC with a Intel® Atom processor D2550
or N2600. The KINO-CV-D25501/N26001 is designed for fanless operation. The low
power CPUs don't require active cooling and stay within specified heat range using the
included heatsink.
Storage on the board is handled by a SATA 3Gb/s port for connecting a hard drive, optical
drive or SSD. The PCIe Mini slot allows an mSATA card to be installed. A bootable
microSD card can be installed into the on-board microSD slot.
The board has three types of graphics output. A VGA output connects to a traditional VGA
monitor, one HDMI connector supports HDMI display and two LVDS connectors support
18-bit/24-bit displays.
Other slots and connectors include a PCIe Mini cards slot, PCI slot, RS-232, RS-422/485,
Gigabit Ethernet, USB 3.0 ports, USB 2.0 ports and digital I/O.
Page 2
KINO-CV-D25501/N26001 SBC
1.2 Benefits
Some of the KINO-CV-D25501/N26001 motherboard benefits include:
Low power consumption
Wide range of I/O interfaces
Dual display support
1.3 Features
Some of the KINO-CV-D25501/N26001 motherboard features are listed below:
Mini-ITX form factor
Fanless design
RoHS compliant
Supports HDMI, LVDS and VGA interface for dual display
Wide range power input (9 V–28 V)
Eight USB ports (six USB 2.0, two USB 3.0)
Six serial ports
PCIe Mini card slot supports mSATA S SD
microSD slot
Dual GbE
Page 3
1.4 Connectors
The connectors on the KINO-CV-D25501/N26001 are shown in the figure below.
KINO-CV-D25501/N26001 SBC
Page 4
Figure 1-2: Connectors
KINO-CV-D25501/N26001 SBC
1.5 Dimensions
The main dimensions of the KINO-CV-D25501/N26001 are shown in the diagram below.
Figure 1-3: Dimensions (mm)
Page 5
1.6 Data Flow
Figure 1-4 shows the data flow between the system chipset, the CPU and other
components installed on the motherboard.
KINO-CV-D25501/N26001 SBC
Page 6
Figure 1-4: Data Flow Diagram
KINO-CV-D25501/N26001 SBC
1.7 Technical Specifications
KINO-CV-D25501/N26001 technical specifications are listed in Table 1-1.
Specification KINO-CV-D25501/N26001
Form Factor
On-board CPU
System Chipset
Memory
Graphics Engine
BIOS
Digital I/O
Ethernet Controllers
Mini-ITX
1.86 GHz Intel® Atom D2550 dual-core CPU
1.60 GHz Intel® Atom N2600 dual-core CPU
1.86 GHz Intel® Atom N2800 dual-core CPU (optional)
Intel® NM10
D2550 and N2800: One 204-pin 1066 MHz DDR3/DDR3L (1.35V)
SDRAM SO-DIMM (system max. 4.0 GB)
N2600: One 204-pin 800 MHz DDR3/DDR3L (1.35V) SDRAM
SO-DIMM (system max. 2.0 GB)
D2550 and N2800: Intel® GMA3650 with 640 MHz graphic core speed
N2600: Intel® GMA3600 with 400 MHz graphic core speed
UEFI BIOS
8-bit, 4-bit input/4-bit output
Two Realtek RTL8111E PCIe GbE controllers
Audio
Super I/O Controller
Watchdog Timer
Expansions
(LAN1 supports ASF 2.0)
Realtek ALC662 HD Audio codec
Fintek F81866
Software programmable supports 1 sec–255 sec system reset
1 x PCIe Mini slot supports mSATA SSD ((SATA2 and mSATA share
SATA signal))
1 x PCI slot
Page 7
I/O Interface Connectors
KINO-CV-D25501/N26001 SBC
Display Output Ports
(Dual Display Supported)
Fan Connectors
Keyboard/Mouse
Serial Ports
USB Ports
SMBus
One Analog CRT (up to 2048 x 1536 @ 75 Hz)
One HDMI (up to 1920 x 1200 @ 60 Hz)
One LVDS 1:
D2550: 24-bit single-channel LVDS up to 1440 x 900
N2600 and N2800: 18-bit single-channel LVDS up to 1366 x 768
One LVDS 2: 24-bit dual-channel LVDS by Chrontel CH7511 DP to
LVDS converter
One 3-pin wafer for CPU fan
One 3-pin wafer for system fan
One internal 6-pin wafer connector
Five RS-232 COM connectors
One RS-422/485 COM connector
Six USB 2.0 (four via pin header, two external ports)
Two external USB 3.0 ports
One 4-pin wafer connector
Storage
microSD
SATA
Environmental and Power Specifications
Power Supply
Power Connector
Power Consumption
microSD slot (bootable)
Two indepen dent SATA channels with 3.0 Gb/s data transfer rates
(SATA2 and mSATA share SATA signal)
Max. power input voltage range: 9 V–28 V
Recommended operating input voltage range: 12 V–24 V
1 x External 4-pin DIN jack
1 x Internal 4-pin (2x2) power connector
12 V @ 2.8 A (1.86 GHz Intel® Atom™ processor D2550 with one
4 GB 1333 MHz DDR3 SO-DIMM)
12 V @ 2.4 A (1.6 GHz Intel® Atom™ processor N2600 with one 2 GB
1333 MHz DDR3 SO-DIMM)
Page 8
KINO-CV-D25501/N26001 SBC
Operating Temperature
Storage Temperature
Operating Humidity
Physical Specifications
Dimensions
Weight GW/NW
Table 1-1: Technical Specifications
D2550: -20ºC–60ºC with free air; -20ºC–70ºC with force air
N2600 and N2800: -20ºC–70ºC with free air; -20ºC–75ºC with force
air
D2550: -30ºC–80ºC
N2600 and N2800: -30ºC–85ºC
5%–95% (non-condensing)
170 mm x 170 mm
600 g/250 g
Page 9
KINO-CV-D25501/N26001 SBC
Chapter
2
2 Packing List
Page 10
KINO-CV-D25501/N26001 SBC
2.1 Anti-static Precautions
WARNING!
Static electricity can destroy certain electronics. Make sure to follow the
ESD precautions to prevent damage to the product, and injury to the
user.
Make sure to adhere to the following guidelines:
Wear an anti-static wristband: Wearing an anti-static wristband can prevent
electrostatic discharge.
Self-grounding: T ouch a grounded conductor every few minute s to discharge
any excess static buildup.
Use an anti-static pad: When configuring any circuit board, place it on an
anti-static mat.
Only handle the edges of the PCB: Don't touch the surface of the
motherboard. Hold the motherboard by the edges when handling.
2.2 Unpacking Precautions
When the KINO-CV-D25501/N26001 is unpacked, please do the following:
Follow the antistatic guidelines above.
Make sure the packing box is facing upwards when opening.
Make sure all the packing list items are present.
Page 11
2.3 Packing List
NOTE:
If any of the components listed in the checklist below are missing, do
not proceed with the installation. Contact the IEI reseller or vendor the
KINO-CV-D25501/N26001 was purchased from or contact an IEI sales
KINO-CV-D25501/N26001 SBC
representative directly by sending an email to
The KINO-CV-D25501/N26001 is shipped with the following components:
Quantity Item and Part Number Image
1 KINO-CV-D25501 or
KINO-CV-N26001
2 SATA and power cable
(P/N: 32801-000100-300-RS)
1 Dual USB cable (w bracket)
(P/N: 19800-003000-200-RS)
sales@ieiworld.com.tw.
Page 12
1 I/O shielding
(P/N: 45014-0038C0-00-RS)
1 Mini jumper pack (2.0mm)
(P/N:33101-000657-RS)
1 Utility CD
KINO-CV-D25501/N26001 SBC
Quantity Item and Part Number Image
1 One Key Recovery CD
1 Quick installation guide
Table 2-1: Packing List
2.4 Optional Items
These optional items are available.
Item and Part Number Image
RS-422/485 cable
(P/N: 32205-003800-300-RS)
KB/MS PS/2 Y-cable
(P/N: 32000-023800-RS)
Table 2-2: Optional Items
Page 13
KINO-CV-D25501/N26001 SBC
Chapter
3
3 Connector Pinouts
Page 14
KINO-CV-D25501/N26001 SBC
3.1 Peripheral Interface Connectors
Section 3.1.1 shows peripheral interface connector locations. Section 3.1.2 lists all the
peripheral interface connectors seen in Section
3.1.1.
3.1.1 Layout
The figure below shows the on-board peripheral connectors, rear panel peripheral
connectors and on-board jumpers.
Figure 3-1: Connector and Jumper Locations
Page 15
3.1.2 Peripheral Interface Connectors
The table below shows a list of the peripheral interface connectors on the
KINO-CV-D25501/N26001. Detailed descriptions of these connectors can be found below.
Connector Type Label
Battery connector 2-pin wafer CN1
Digital I/O connector 10-pin header DIO1
Fan connectors 3-pin wafer CPU_FAN1,
Front audio connector 10-pin header FRONT-PANEL1
Front panel connector 8-pin header F_PANEL1
Keyboard/mouse connector 6-pin wafer KB_MS1
KINO-CV-D25501/N26001 SBC
SYS_FAN1
LVDS connector (1) 20-pin crimp LVDS1
LVDS connector (2) 30-pin crimp LVDS2
LVDS1 backlight connector 5-pin wafer INV1
LVDS2 backlight connector 5-pin wafer INV2
microSD card slot microSD slot CN7
PCI slot PCI slot PCI1
PCIe Mini card slot PCIe Mini card slot M_PCIE1
Power connector (9 V–28 V)
Power button Push button PWR_SW1
RS-232 serial ports (COM3, COM5, COM6) 10-pin hea der COM3, COM5,
RS-422/485 serial port (COM4) 4-pin wafer COM4
SATA connectors SATA connector SATA1, SATA2
SA TA power connectors 4-pin wafer SATA_PWR1
4-pin connector CN3
COM6
Page 16
SATA_PWR2
SMBus connector 4-pin wafer SMBUS_1
Loading...