IDK HDC-TH100-D, HDC-RH100-D User Manual
4K@60 and HDCP 2.2 supported HDMI Twisted Pair Cable Extender
HDC-TH100-D / HDC-RH100-D
<User’s Guide>
Ver.1.0.0
Thank you for choosing our product.
To ensure the best performanc e of this product, please read this User’s Guide fully and carefully
before using it and keep t his manual together with the product for r eference as needed.
IDK Corporation
HDC-TH100-D / HDC-RH100-D User’s Guide
Trademarks
Blu-ray Disc and Blu-ray are trademark s of Bl u-r ay Di sc Association.
ETHERNET is a registered t r adem ar k of Fuji Xerox Co., Ltd.
The terms HDMI and HDMI High-Definition Multimedia Int erface, and the HDMI Logo are tradem arks or
registered tradem ar k s of HDM I Licensi ng A dm inistrator, Inc. in the Unit ed S tates and other countries.
HDBaseT™ and the HDBaseT Alliance Logo are trademark s of the HDBaseT Alli anc e.
All other company and product names mentioned in this manual ar e either r egistered trademark s or
trademark s of their r espect ive owners. In this manual, the “®” or “™” marks may not be specified.
2
HDC-TH100-D / HDC-RH100-D User’s Guide
Before reading this manual
All rights reserv ed.
Some of the contents i n this User’s G uide such as appearance diagr ams, menu operations,
communication commands, and so on may differ depending on the v er sion of the product.
This User’s Guide is subject to change without notice. You can download the l atest version from IDK’s
website at: http://www.idkav.com
FCC STATEMENT
This equipment has been tested and found to comply with the limit s for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limit s are designed to provide reasonabl e pr otection against harmful
interfer enc e when the equipment is operated in a commercial env ir onm ent. This equipment generat es, uses,
and can radiate radio frequenc y ener gy and, if not installed and used in accor danc e with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which c ase the user will be requi r ed to cor r ect the int erference
at his own expense.
CE MARKING
This equipment complies with the essential requi r em ents of t he r elev ant European health, safet y and
environmental protection legislation.
WEEE MARKING
Waste Electrical and Elect r onic Equi pm ent (WEEE), Directive 2002/96/E C
(This directive is only valid in the EU.)
This equipment complies with the W EEE Dir ectiv e (2002/96/EC) marking requirement.
The left marking indicates that you must not discard thi s elect ri c al/electronic equipment in
domestic household waste.
3
HDC-TH100-D / HDC-RH100-D User’s Guide
Enforcement Symbol
Description
Indicates the pr esence of a haz ar d that m ay result in death or serious
Indicates the pr esence of a haz ar d that m ay cause mi nor personal
Symbol
Description
Example
disassemble
Warning
Caution
Safety Instructions
Read and understand all safety and operating instr uc tions before using this product. Follow all instructi ons
and cautions as detailed in this document.
Caution
Prohibited
Instruction
personal injur y if the warning is ignored or the product is handled
incorrectly.
This symbol is intended to al ert the user. (Warning and caution)
This symbol is intended to pr ohibit the user from specified actions.
This symbol is intended to instr uc t the user.
injury or property damage if the caution is ignored or the product is
handled incorr ec tly.
Electrical
Hazard
Do not
Unplug
4
■ For lifting heavy products:
●
●Do not place the product in any unstable place.
●
Otherw ise, it may mo ve/fall and lead to injur y.
●Installation work must be done by the professionals.
●
●
●
problems.
●Keep out any foreign objects.
●
・
・
・
contact your IDK representative.
disassemble
●Do not repair, modify or disassemble.
that uses potentially lethal, high voltage levels, disassembly by unauthorized
●Do not touch the product and connected cables while thunder lasts.
●Clean the power plug regularly.
Warning
Lifting m us t be do ne by t wo or m or e pers onnel.
If you lift the product with your knees straight fully,
When lifting the produc t, b end you r kn ees and get clos e to it with tw o or more pers ons; otherwise, your bac k m ay
Instruction
be damaged.
■ For insta lling and c on ne c t i ng pr oducts:
Install the product in a horizont al an d st abl e place. Ot h er wise, it may fall/turn over and lead to injury.
Prohibited
Secure the product if installing it at paces wh ere there is much vibration.
HDC-TH100-D / HDC-RH100-D User’s Guide
Instruction
The product is intended to be installed by skilled technicians. For installation, please contact a system integrator
or IDK. Im proper ins tallati on m ay l ead to the risk of f ire, electric sh ock, injury, or pr op er t y dam ag e.
Set the power plug in a convenient place to unplug easily.
Unobstr uc t ed ac cess to the plug enab l es un pl ugging th e product in case of any extraordin ary failure, abnormal
situation or f or eas y dis connect ion durin g ext ended p eri ods of n on-use.
Insert the power plu g into an appropriat e o ut le t complete ly .
If the plug is partially inserted, arching may cause the connection to overheat, increasing the risk of electrical
shock or fire. Do not use a damaged plug or connect to a damaged outlet.
Unplug the AC adapter when instal ling prod uc ts .
When con n ecti ng devices, unpl ug all d evices fr om ou tl ets. Grou nd po tential g ap m ay c ause fire or oth er
■ For operat i ng produc ts :
In order to avoid fire or electric shock, do not allow foreign objects, such as metal and paper, to enter the product
from the vent holes.
For power cable/ plug:
Prohibited
Do not scratch, heat, or modify , inclu din g lengthening them.
Do not pull, place heavy objects on them, or pinch them.
Do not bend, twist, or tie them together forcefully.
Misuse of the power c ab l e and pl ug may cause fire or electric shock. If power cables/plugs become damaged,
Since the product inc l ud es circuitry
personnel may lead to the risk of fire or electric shock. For internal inspection or repair, contact your IDK
Do not
Do not touch
Instruction
representative.
Contact may cause electric shock
If the plug is covered in dust, it may in cr e ase the ri sk of firer.
5
HDC-TH100-D / HDC-RH100-D User’s Guide
●Unplug immediately if the product smokes, makes unusual noise, or produces a
●
●
maintenance and repair, contact your IDK representative.
Warning
■ If the following problem occurs:
burning odor.
If you continue to use the product under these conditions, it may cause electric shock or fire.
Unplug
Unplug immediately if the product is damaged due to falling .
If you continue to use the product under these conditions, it may increase the risk of electrical shock or fire. For
maintenance and repair, contact your IDK representative.
Unplug immedia tely if wate r or othe r objects are directed inside.
If you continue to use the product under these conditions, it may increase the risk of electrical shock or fire. For
6
●Do not place the product in any place where it will be subjected to high
●
●
●
●
Exceed in g the rating of an outlet m ay inc rease t h e risk of fire and el ec tr ic sh ock .
No wet hands
●Do not plu g or un plug with wet hands.
●Use and store the product within th e speci f ied temperature/humidity range.
●
●
●
on the b ott om
Reinstall the originally supplied r ubber fee t using only the originally supplied screws.
Prohibited
●Use only the supplied power cable and AC adapter.
●
●If the pro duc t won’t be used for an extended period of time, unplug it.
●
To prevent electri c shock.
Caution
■ For installing and connecting products:
HDC-TH100-D / HDC-RH100-D User’s Guide
temperatures.
If the product is subjected to direct sunlight or high temperatures while under operation, it may affect the
product’s performance and reliabilit y and m ay i nc rease th e risk of f ir e.
Do not place the product in dusty, oil smoke filled, or humid place.
Prohibited
If the product is placed near humidifiers or in a dusty area, it may increase the risk of f i re or e lec tr i c shock.
Do not block the vent holes.
If ventilation slots are blocked, it may cause th e prod uc t to ov erheat, affectin g p erformance and reliabilit y an d
may incr ease the risk of f ir e.
Do not place or stack heavy items on the product.
Failure to observe this precaution may result in damage to the product and other property and may lead to the
risk of pers on al in jury.
Do not exceed ratings of outlet and wiring devices.
Failure to observe this precaution may incr ease the ris k of electrical shock.
If the prod uc t is used outside the specified range for temperature and humidity continu ous l y, it m ay increase the
risk of fire or electric shock.
Do not place the product at elevations of 2,000 meters (1.24 mi.) or higher above
sea level.
Failure to do so may shorten the life of the internal parts and result in malfunctions.
Instruction
When mounting the product into the rack, provide sufficient cooling space.
Mount th e pr oduc t in a the r ac k m eeti ng EIA standards, an d m aintain s p ac es ab ov e and b el ow for air cir c u l ation.
For your safety, attach an L-shaped bracket in addition to the panel mount bracket kit to improve mechanical
stability.
Never insert screws without the rubber feet into the threaded holes
of the prod uc t.
Never insert screws without the rubber feet into the threaded holes on the bottom of the product. Doing so may
lead to damage when the screws contact electrical circuitry or components inside the product.
■ For operat i ng produc ts :
Do not use the supplied power cable and AC adapter with other products.
If non-compliant adapter or power cables are used, it m ay increase the risk of fire or el ec tr ical shoc k.
Failure t o observe this precaut i on m ay inc reas e the ris k of f ir e.
Unplug
Unplug the product before cleaning.
7
HDC-TH100-D / HDC-RH100-D User’s Guide
Table of Contents
1 Included Items ...................................................................................................................................... 9
2 Product outline ....................................................................................................................................10
3 Features ..............................................................................................................................................11
4 System Configur ation Example ............................................................................................................12
5 Panels .................................................................................................................................................13
5.1 Transmitt er (HDC-TH100-D) ...........................................................................................................13
5.2 Receiver (HDC-RH100-D) ..............................................................................................................15
6 Precautions .........................................................................................................................................17
6.1 Installation ......................................................................................................................................17
6.1.1 Installing on wall or c eiling .......................................................................................................17
6.1.2 Twisted pair cable for extension ..............................................................................................18
6.1.3 Cables ....................................................................................................................................19
6.2 Cabling ...........................................................................................................................................20
6.2.1 LAN cable ...............................................................................................................................21
6.2.2 RS-232C cable ........................................................................................................................21
6.2.3 RS-232C communication function ...........................................................................................21
6.2.4 Cascade connecti on ................................................................................................................21
6.2.5 DVI signals with copy ri ght protection .......................................................................................22
7 Specifications ......................................................................................................................................23
7.1 RS-232C pin assignment ................................................................................................................23
7.2 Product specifi c ation.......................................................................................................................25
8 Troubleshooting...................................................................................................................................26
8
HDC-TH100-D / HDC-RH100-D User’s Guide
■
■
1 Included It e ms
Ensure all items below are included in the package.
If any items are missing or dam aged, please contact IDK.
Transmitter
・HDC-TH100-D (main unit) x1
・AC adapter with screw locking m ec hanism (3.9 ft. (1.2m)) x1
・Cable clamp x1
Receiver
・HDC-RH100-D (main unit) x1
・AC adapter with screw locking m ec hanism (3.9 ft. (1.2m)) x1
・Cable clamp x1
This User’s Guide is common to both the transmitt er and rec eiver. You can download the lat est v er si on from
IDK’s website at: http://www.idkav.com
One (1) main unit HDC-TH100-D (Transmitter)
One (1) AC adapter with screw
locking mechanism (3.9 ft. (1.2m))
[Fig. 1.1] Included item s
One (1) main unit HDC-RH100-D (Receiver)
Cable clamps
9
Loading...