IDEC MicroSmart Data Sheet
MicroSmart Pentra with Logic Engine
Features
• Fast processing speed
• Supports 32-bit data processing
• IEEE standard Floating Pt. Math
• Built-in Modbus master & slave
• Field upgradeable firmware
• Up to 512 I/Os
• Configure up to 56 analog I/Os
• Max. of 7 communication ports
• Embedded 100kHz HSC & pulse outputs
• Online Edit and Simulation Mode
• UL Listed for Class 1 Div. 2 Hazardous Locations
Slim (Book) Models with Logic Engine All-In-One (Brick) Models
FC5A-D16RK1
FC5A-D16RS1
Instruction Words
Program Capacity*1 62.4KB (10,400 steps) 13.8 KB (2,300 steps) 27KB (4,500 steps) 54KB (9,000 steps)
User Program Storage EEPROM (10,000 times rewritable)
Processing
Time
Expandable I/O Modules
I/O
Points
Internal Relay 2,048 points 2,048 points
Shift Register 256 points 128 points
Data Register 42,000 points*3 2,000 points
Expansion Data Register 6,000 points –
Counter 256 points 256 points
Timer (1-sec, 100-ms, 10-ms, 1-ms) 256 points 256 points
Input Filter Without filter, 3 to 15 ms (selectable in increments of 1 ms)
Catch Input/Interrupt Input
High-speed
Counter
Analog
Potentiometer
Function Specifications
Analog
Voltage
Input
Pulse
Output
Sensor
Power
Supply
Port 1 RS232C (maintenance communication, user communications)
Port 2 Communication Adapter (optional)
Clock Cartridge (optional) Yes
Memory Cartridge (optional) Yes
HMI Module (optional) Yes
Modbus Master/Slave Yes
Notes: The maximum number of relay outputs that can be turned
on simultaneously is 54 including those on the CPU module.
*1. One step equals 6 bytes.
*2. Not including expansion I/O service time, and clock function,
data link and interrupt processing time.
Basic Instruction 83µs (1,000 steps) 1.16ms (1,000 steps)
END Processing
Input 8
Output 8 16 4 7 10
Maximum Counting
Frequency and High-speed Counter
Points
Counting Range 0 to 4294967295 (32 bits) 0 to 65535 (16 bits)
Operation Mode Rotary encoder mode and adding counter mode
Quantity 1 point 2 points
Data Range 0 to 255
Quantity 1 point
Input Voltage Range 0 to 10V DC
Input Impedance Approx. 100kΩ
Data Range 0 to 255 (8 bits)
Quantity 2 points 3 points
Maximum Frequency 100 kHz
Output Voltage Current
Overload Detection –
Isolation Isolated from the internal circuit
*2
88 advanced 92 advanced 76 advanced 76 advanced 81 advanced
7 modules + additional 8 modules
using the expansion interface module
Expansion: 224
Additional: 256
Four inputs (I2 through I5)
Minimum turn on pulse width: 5 µs maximum
Minimum turn off pulse width: 5 µs maximum
Total 4 points
Single/two-phase selectable: 100 kHz (2 points)
Single-phase: 100 kHz (2 points)
*4
*3. Extra data registers D10000 through D49999 are enabled
using WindLDR Function Area Settings, then run-time
program download cannot be used.
FC5A-D32K3
FC5A-D32S3
0.35ms 0.64ms
16
Expansion: 224
Additional: 256
—
FC5A-C10R2
FC5A-C10R2C
35 basic
6 9 14
Four inputs (I2 through I5)
Minimum turn on pulse width: 40 µs maximum
Minimum turn off pulse width: 150 µs maximum
Total 4 points
Single/two-phase selectable: 50 kHz (1 point)
Single-phase: 5 kHz (3 points)
24V DC (+10% to -15%), 250 mA
Yes
*4. Maintenance communication, user communication,
Modem communication, data link, Modbus master/slave
communication (FC5A only).
FC5A-C16R2
FC5A-C16R2C
– 4 modules
–
–
Specifications con’t on following page
FC5A-C24R2
FC5A-C24R2C
Expansion: 64
Specifications con’t from front
47.5
90.0
70.014.6
47.5
90.0
70.011.3
90.0
80.0 70.0
95.0
90.0
70.0
Rated Power
Voltage
Allowable Voltage
Range
Rated Power
Frequency
Maximum Input
Current
Maximum Power
Consumption
Slim (Book) Models
with Logic Engine
FC5A-D16RK1
FC5A-D16RS1
20.4 to 26.4V DC (including ripple)
N/A N/A AC power model: 50/60 Hz (47 to 63 Hz)
700mA (26.4V DC)
19W (26.4V DC)
24V DC
FC5A-D32K3
FC5A-D32S3
*1
*1
FC5A-C10R2
FC5A-C10R2C
DC power model: 20.4 to 28.8V DC (including ripple)
250mA (85V AC)
160mA (24V DC)
AC: FC5A-C10R2:
30VA (264V AC)
20VA (100V AC)*4
DC: FC5A-C10R2C:
3.9W (24V DC)
*5
All-In-One
(Brick) Models
FC5A-C16R2
FC5A-C16R2C
AC power model: 100 to 240V AC
DC power model: 24V DC
AC power model: 85 to 264V AC
300mA (85V AC)
190mA (24V DC)
AC: FC4A-C16R2:
31VA (264 V AC)
22VA (100V AC )*4
DC: FC5A-C16R2C:
4.6W (24V DC)
Allowable
Momentary
10ms (at 24V DC) 10ms (rated power voltage)
Power Interruption
Between power and terminals:
Dielectric Strength
500V AC, 1 minute
Between I/O and terminals:
Between power and
or terminals: 1500V AC, 1 minute
Between I/O and or terminals: 1500V AC, 1 minute
1,500V AC, 1 minute
Between power and terminals:
Insulation
Resistance
10MΩ minumum (500V DC
megger)
Between I/O and terminals:
10MΩ minumum (500V DC
Between power and or terminals: 10MΩ minimum
(500V DC megger)
Between I/O and or terminals: 10MΩ minimum
(500V DC megger)
megger)
DC power terminals:
Noise Resistance
1.0kV, 50ns to 1µs
I/O terminals (coupling clamp):
1.5kV, 50ns to 1µs
Inrush Current 50A maximum (24V DC) 35A 40A
General Specifications
Power Supply Wire 22 - 18AWG
Operating
Temperature
Storage
Temperature
AC power terminals: 1.5kV, 50ns to 1µs
DC power terminals: 1.0kV, 50ns to 1µs
I/O terminals (coupling clamp): 1.5 kV, 50ns to 1µs
0 to 55ºC
–25 to +70ºC (no freezing)
Relative Humidity Level RH1 (IEC61131-2), 10 to 95% (no condensation)
Altitude Operation: 0 to 2,000m, Transport: 0 to 3,000m
Pollution Degree 2 (IEC60664-1)
Corrosion
Immunity
Degree of
Protection
Free from corrosive gases
IP20 (IEC60529)
Grounding Wire 22 - 18AWG 16AWG
Vibration
Resistance
2 hours per axis on each of three mutually perpendicular axes (IEC61131-2)
When mounted on a DIN rail or panel surface:
5 to 9 Hz amplitude 3.5 mm, 9 to 150 Hz acceleration 9.8 m/s2 (1G),
Shock Resistance 147 m/s2 (15G), 11 ms duration, 3 shocks per axis on three mutually perpendicular axes (IEC61131-2)
Weight 230g 190g
Notes: *1. CPU module + 7 I/O modules. *2. CPU module (including 250 mA sensor power) + 4 I/O modules. *3. CPU module + 4 I/O modules.
*4. CPU module (including 250 mA sensor power). *5. CPU module (24V DC)
Slim Models
16 I/O Points 32 I/O Points
10 I/O Points 16 I/O Points 24 I/O Points
AC model: 230g
DC model: 240g
All-In-One Models
AC model: 250g
DC model: 260g
FC5A-C24R2
FC5A-C24R2C
450mA (85V AC)*2
360mA (24V DC)
AC: FC4A-C24R2:
40VA (264V AC)
33VA (100V AC)*2
DC: FC5A-C24R2C:
*5
8.7W (24V DC)
AC model: 305g
DC model: 310g
CPU Dimensions - Slim
FC5A-D16RK1, FC5A-D16RS1
*3
*3
FC5A-D32K3, FC5A-D32S3
CPU Dimensions - Brick
FC5A-C10R2, FC5A-C16R2
FC5A-C10R2C, FC5A-C16R2C
FC5A-C24R2, FC5A-C24R2C
All dimensions in mm.
IDEC Corporation
1175 Elko Drive
Sunnyvale, CA 94089
800-262-IDEC (4332)
Fax: 408-745-5258
www.idec.com
©2006 IDEC Corporation. All Rights Reserved.
Loading...