IDEC HG1F Data Sheet

4.6” Monochrome STN LCD Touchscreen - HG1F

Features

• Super bright monochrome LCD screen: 500 cd/m

• High resolution: 300 x 100 pixels.

• High performance CPU for fast response

• Analog resistive touch panel

• Screen orientation: Landscape or Portrait

• Slim frame design

• Large memory capacity of 1MB

• O/I link communication

• 1:N PLC communication (IDEC/Modbus PLC)

• Supports major brand PLC manufacturers: IDEC,
Allen Bradley, Omron, Mitsubishi, Automation
Direct (Koyo), GE, Siemens, and many more

• Multilingual capabilities: English, simplified & traditional
Chinese, Korean, central European languages, etc.

• Approvals: UL, c-UL, Hazardous Locations Class 1
Div. 2, Nema Type 13, IP65, CE

• Programming Software: WindO/I-NV2 Ver 3.12 or higher

2

Actual Size

Specifications

General Specifications

Rated Power Voltage 24V DC

Power Voltage Range 20.4 to 28.8V DC

Power Consumption 10W maximum

Power Inrush Current 20A maximum

Allowable Momentary
Power Interruption

Dielectric Strength 1,000V AC, 10mA, 1 minute between power & FG terminals

Insulation Resistance

Backup Battery CR2032 lithium battery, Life approx. 4 years (25°C)

Operating Temperature 0 to 50°C

Operating Humidity 10 to 90% RH (no condensation)

Storage Temperature –20 to +60°C

Storage Humidity 10 to 90% RH (no condensation)

Pollution Degree 2 (IEC 60664-1)

Corrosion Immunity Atmosphere free from corrosive gases

Vibration Resistance
(damage limits)

Shock Resistance
(damage limits)

Noise Immunity

Electrostatic Discharge

Mounting Panel mounting

Degree of Protection IP65, Nema Type 13 (operator)

Dimensions 147W x 76H x 39.3D mm

Weight (approx.) 280g

10ms minimum

50MΩ minimum between power & FG terminals
(500V DC megger)

10 to 20Hz amplitude 0.625mm, 20 to 55Hz acceleration

9.8m/s2, 2 hours per axis on each of three mutually
perpendicular axes

147m/s2, 11ms, 5 shocks on each of three mutually
perpendicular axes

Fast transient/burst test, Common mode: Level 3,
Power terminals: ±2 kV,
Communication line: ±1kV, (IEC 61000-4-4)

ESD-3 (RH-1), Level 3, (contact ±6kV, air ±8kV),
(IEC 61000-4-2)

Portrait Orientation

Landscape Orientation

35.3mm

Side View

Specifications con’t on following page

Specifications Con’t

136.8

65.8

35.3

39.3

Panel Thickness 1.6 to 5

The above figure illustrates the RS485/422 version.

4

76.0

38.4

111.4

147

137

+1.5
0

66

+1

0

Panel Cut-out

Display Specifications

LCD Monochrome STN

Effective Display Area 111.4W x 38.4H mm

Display Resolution 300W x 100H pixels

LCD Life 50,000 hours minimum

Contrast Adjustment Possible in steps using the front touch screen

Backlight Cold-cathode tube

Backlight Life 50,000 hours nominal (Note)

Backlight Control Automatic OFF

Backlight Replacement Possible

Note: The backlight life refers to the time when the surface brightness is reduced by half
after using continuously at room temperature.

Function Specifications

Screen Types Base screen, popup screen, system screen

No. of Screens Base screen: 3,000 max., popup screen: 3,000 max.

User Memory 1MB (including expansion fonts)

Bit Button, Word Button, Goto Screen Button, Print But­ton, Key Button Keypad, Selector Switch, Potentiometer,
Numerical Input, Character Input, Pilot Lamp, Multi­State Lamp, Picture Display, Message Display, Message

Parts

Calendar

Power Failure
Backup Data

Battery Life 4 years (at 25°C)

Switching Display, Alarm List Display, Alarm Log Display,
Numerical Display, Bar Graph, Trend Chart, Pie Chart, Me­ter, Calendar, Bit Write Command, Word Write Command,
Goto Screen Command, Print Command, Screen Script
Command, Timer

Year, Month, Day, Hour, Min., Sec., Day of Week
±30 sec per month (at 25°C)

Calendar, log data, keep internal relay, keep internal
register

Part Numbers

Display

Screens

Part Numbers

HG1F-SB22BF-W Light Gray

4.6” STN
Monochrome
LCD

Operator Interfaces

*Silver bezel is not UL Listed or in-stock item.

HG1F-SB22BF-S Silver*

HG1F-SB22YF-W Light Gray

HG1F-SB22YF-S Silver*

Description Part Numbers

WindO/I-NV2 - Programming software
for all Touchscreens. PLC Drivers are
included with the software.

Software

Programming cable for HG1F Series (PC
to HG1F)

Cable

Protective Sheet (5 piece minimum) HG9Z-1D

Replacement Backlight (1 pc.) HG9Z-1FB

Mounting Clips (10 piece minimum) SLD-K02

Replacement Battery (1 pc.) HG9Z-XR1

Accessories

O/I Link Unit HG9Z-2G1

Bezel
Color

Dimensions

Communication

Type

RS-232HG1F-SB22BF-B Black

RS-485 / RS-422HG1F-SB22YF-B Black

HG9Y-ZSS2W

HG9Z-XCM1A or
FC2A-KC4C

HG1F to PLC Communication Cable Part Numbers

IDEC PLC Model Comm. Type Link Unit Used

RS-232

Microsmart
(FC5A & FC4A)

OpenNet Controller
or Micro3C

RS-485

RS-232

RS-485

Micro3 RS-485

* More cable part numbers available at www.idec.com/usa/hg1f
** Cable FC4A-KC1CA can also be used

IDEC Corporation • 1175 Elko Drive • Sunnyvale, CA 94089 • 800-262-IDEC (4332) • Fax: [phone] • www.idec.com

FC4A-PC1 or FC4A-HPC1 HG9Z-XC183**

Built-in Port
(8 pin Mini-Din)

FC4A-PC3 or FC4A-HPC3 HG9Z-1C131A

FC4A-PC2 or FC4A-HPC2 HG9Z-1C121A

Built-in Port
(8 pin Mini-Din)

Built-in Port
(Screw terminal type)

Built-in Port
(8 pin Mini-Din)

©2006 IDEC Corporation. All Rights Reserved. Catalog No. HG9Y-DS100-0 11/06 10K

Cable Part

Number*

FC4A-KC1CA

HG9Z-XC183

HG9Z-1C131A

HG9Z-1C121A