IDEC HE1B Data Sheet

HE1B

HE1B Basic Enabling Switch

Key features:

• 3-position functionality (OFF – ON –OFF) as required for manual robotic control

OverviewXW Series E-StopsInterlock SwitchesEnabling SwitchesSafety Control RelaysLight CurtainsAS-Interface Safety at Work

• Ideally suited for use as enabling (aka “deadman”) switch on teach pendants

• Provides a high level of safety based on human behavioral studies that determine personnel may squeeze OR let go when presented with a panic situation

• Positive action contacts “On” (pos. 2) to “Off” (pos. 3) ensure no contact welding (per EN60947-5-1 / IEC60947-5-1)

• Contacts will not close when released from “Off” (pos. 3) to “Off” (pos. 1) (per IEC60204-1; 9.2.5.8)

• Small and lightweight

Part Numbers

Item Installation Part Number

Enabling Switches

Side HE1B-M1

Front HE1B-M1N

Specications

Conforming to Standards

Operating Temperature –25 to +60˚C (no freezing) Operating Humidity 45 to 85% RH (no condensation) Storage Temperature –40 to +80˚C (no freezing) Pollution Degree 2 Initial Contact Resistance 50mΩ maximum Insulation Resistance 100MΩ minimum Impulse Withstand Voltage 2.5kV Operating Frequency 1200 operations/hour

Mechanical Life

Electrical Life 100,000 operations minimum at rated load

Shock Resistance

Vibration Resistance

Terminal Solder Terminal Recommended Wire Size 0.5mm2 maximum / 1 line (20AWG) Solder Heat Resistance 260°C / 3 seconds maximum Terminal Pulling Strength 20N minimum Recommended Screw Torque HE1B-M1: M3 screw / 0.5 to 0.8Nm Degree of Protection IP40 (IEC 60529) excluding terminal part Conditional Short-Circuit Current 50A (250V) Recommended Short Circuit Protection 250V, 10A fast blow fuse (IEC 60127-1) Circuit Opening Force 30N minimum (position 2 3) Control Resistance (Operating) 250N minimum Weight Approx. 6g

Operating Extremes 150m/s Damage Limits 1000m/s2 (100G) Operating Extremes 5 to 55Hz, amplitude 0.5mm minimum Damage Limits 16.7Hz, amplitude 1.5mm minimum

UL508 (UL recognized), CSA C22.2, No. 14 (c-UL recognized), IEC/EN 60947-5-1, IEC/EN 60947-5-8 (TÜV approval)

Position 1 2 1: 1,000,000 operations minimum Position 1 2 3 1: 100,000 operations minimum

(15G)

394

1607302053

Enabling Switches

(position 3 to 1)

Position 1 Position 2 Position 3

When pressed to position 3: 2

Screw Length = (panel thickness

Current Ratings

Rated Insulation Voltage (Ui) AC / DC250V Thermal Current (lth) 5A Rated Operating Voltage (Ue) 30V 125V 250V

Rated Operating

AC 50/60Hz

Current (le)

Contact Conguration SPST-NO three position (OFF-ON-OFF)

Minimum applicable load: AC/DC3V • 5mA (For reference only).

Operating Characteristics

(when pressing the center)

: ON (closed)

: OFF (open)

Pressing

(position 1 to 2 to 3)

Releasing

(position 2 to 1)

Releasing

Resistive Load (AC-12) – 3A 1.5A Inductive Load (AC-15) – 1.5A 0.75A Resistive Load (DC-12) 2A 0.4A 0.2A Inductive Load (DC-13) 1A 0.22A 0.1A

Approx. 15N

Operating Force

(reference value)

Approx. 3N

Travel (mm)

0 1.4

±0.3

2.2

±0.3

2.7

±0.5

HE1B

Overview XW Series E-Stops Interlock Switches Enabling Switches Safety Control Relays Light Curtains AS-Interface Safety at Work

5.0

Dimensions (mm)

1. M3 Screw (not provided)

2. Thread built in

Solder Terminal

13.6

7.6

2.8 4

1. M3 Screw (not provided)

2. Locking nut (2 pcs) included

HE1B-M1 (Side Mounting)

9 min.

15 min.

±0.2

+ 5 to 6mm)

HE1B-M1N (Front Mounting)

±0.5

When using a panel thicker than 2mm, the button will be

lower than the surface of the panel

1607302053

395