Ideal SCLEV1000 User Manual

Product Manual

Qty

Description

1

SCELV1000 Smart Connector

SCELV1000 – Electronic Low Voltage Luminaire Controller

PRODUCT DESCRIPTION

The AC Smart Connector is a wireless device
which provides electrical connectivity
between the light fixture (load) and
120V/277V AC line power and provides
on/off power control and dimming to the
load. The information that tells the
connector to power on/off/dim the fixture
is acquired via wireless signals that
originate from a building automation
system or from room controls, based on
environmental conditions and/or
predetermined programs.

KEY FEATURES

FCC and IC approved
External fixture mounting
Small form factor
Integrated Wire Antenna
RoHS compliant

Audacy®, Smart Connector® and Smart Switch® are registered trademarks of IDEAL INDUSTRIES.

All other trademarks are the property of their respective owners.

PRODUCT CONTENTS

The following items are included inside the
package:

ND xxxx-1 01/2016 Users Manual – SCELV1000 Downlight/LED Smart Connector Page 1
www.idealindustries.com

Product Manual

SCELV1000 – Electronic Low Voltage Luminaire Controller

IDEAL Model SCELV1000 Electronic Low Voltage Luminare

Controller Installation Instructions

WARNING: This is a current rated device. Use in applications involving

amperage beyond its rating can be dangerous and cause electrical fires.

Wiring must comply with all applicable electrical codes.
Turn off power before removing or installing connector.

TERMINOLOGY

LINE(Black): Smart Connector power feed to be connected to premise wiring
LOAD(Red): Power output from Smart Connector to ballast AC power input
Neutral(White): Incoming Neutral from premise wiring and outgoing ballast
neutral.

CONNECTING THE WIRES

Input Power
The smart connector LINE(Black) and NEUTRAL(White) wires are 18 AWG solid copper
conductors.

1. Strip wires to 1/2”.

2. Connect Smart Connector Line Input to premise line power feed with appropriate sized
wirenut or push-in connector.

3. Connect Smart Connector Neutral Input to premise neutral feed with appropriately sized
wirenut or push-in connector..

4. For feed-through (i.e., “daisy-chain”) installations, connect the LINE hot feed-through
conductor into the wirenut in step 2. Also, connect the NEUTRAL feet-through conductor
connected without re-installing the wires. into the wirenut in step 3.

.

ND xxxx-1 01/2016 Users Manual – SCELV1000 Downlight/LED Smart Connector Page 2
www.idealindustries.com

Product Manual

Item

Description

Radio

915 MHz External Antenna

Regulatory Approvals

FCC Part 15 and Industry Canada
FCC ID: 2AAMXSCELV1000
IC: 11250A-SCELV1000
UL916

Transmit Range

300 ft. indoors line of sight to an Audacy Gateway or Smart Connector

Load Dimming

Forward Phase Triac Based Line Dimming

Load Amperage

5A

Switching Cycles

50,000

Power

120VAC/277VAC

Operating Temperature

0°C to 70°C

Storage Temperature

-20°C to 90°C

Installation
Environment

Indoor use only
Dimensions

4.67”x1.75”x0.99”

Warranty

1 yr

SCELV1000 – Electronic Low Voltage Luminaire Controller

LOAD
The LOAD(red) and Neutral(White) wire are 18 AWG solid copper conductors.

1. Strip wires to 1/2”.

2. Connect Smart Connector LOAD wire to the ballast hot line with appropriate sized wirenut or
push-in connector if necessary.

3. Connect Smart Connector NEUTRAL Output to the ballast neutral with appropriately sized
wirenut or push-in connector if necessary.

4. For feed-through (i.e., “daisy-chain”) installations, connect the LOAD hot feed-through
conductor into the wirenut in step 2. Also, connect the NEUTRAL Output feed-through
conductor into the wirenut in step 3.

PROGRAMMING

Refer to the Audacy™ system configuration manual to associate smart connectors to other
devices and to set up operating parameters for the Audacy™ lighting control system

SPECIFICATIONS

ND xxxx-1 01/2016 Users Manual – SCELV1000 Downlight/LED Smart Connector Page 3
www.idealindustries.com