Ideal 0101 HDP User Manual
IDEAL 0101 HDP
The ideal solution for making discarded
hard drives from personal computers,
notebooks, printers and copiers unusable.
Level H-3 3,5˝ / 2,5˝ Hard Disks
Punching cycle: 15 s
Technical specifications
Power 230 V / 50 Hz
Motor capacity 640 Watt single phase motor
Dimensions
Weight 63 kg
850 x 495 x 470 mm (H x W x D)
Product characteristics
At the touch of a button, the IDEAL 0101 HDP punches a hole completely through the
hard drive, rendering the stored data unaccessible. The mechanical components,
the PC board as well as the hard disc are damaged, which corresponds to security
level H-3 of the DIN 66399 standard. Suitable for 3.5“ or 2.5“ hard drives (single
feeding). Adjustable feed chute constructed of high quality steel. Handy slide lever
for easy selection of hard drive size (3.5“ or 2.5“). Transparent safety flap on the feed
chute made of unbreakable plastic. Punching die made from hardened, nickelplated steel. Sturdy steel endplate. LEDs for illuminating the feed chute during the
punching process. Slider mechanism for unloading punching compartment.
Destroyed hard drives drop into a sturdy plastic bin inside the cabinet. High-quality
wooden cabinet with front opening door. SPS (Safety Protection System) safety
package: electronically controlled, hinged safety flap for the feed opening; EASYSWITCH multifunction control element for start and stop indicates the operational
status of the machine with varying colour codes and back-lit symbols; jam protection for punching die with automatic reverse; automatic stop after the punching
process; weight sensor for automatic shut-off when the collection bin is full;
electronic door protection via a magnetic proximity switch; double motor protection.
Quiet and powerful single phase motor rated for continuous operation. Sturdy Twin
Drive System with fully enclosed gear box housing. Mobile on castors.
WWW.IDEAL.DE
IDEAL 0101 HDP
Features
SUITABLE FOR 3.5” AND 2.5” HARD DRIVES
The hard drive punch IDEAL 0101 HDP is
designed for the two most common hard drive
sizes.
PUNCHING DIE FROM HIGH GRADE TOOL-STEEL
The punching die is made of hardened, nickelplated tool steel. Durability is also guaranteed
by a powerful single phase motor rated for
continuous operation in combination with the
sturdy Twin Drive System.
FEEDING CHUTE WITH SAFETY FLAP
The electronically controlled, transparent safety
flap is an important part of the SPS (Safety
Protection System) package. The punching die
can only be activated if the safety flap is closed.
EASY-SWITCH FOR INTUITIVE OPERATION
The intelligent multifunction control element
indicates the operational status of the machine
with colour codes and back-lit symbols for safe
and easy operation.
The technical data are approximate. Subject to change. 02/2017
Loading...