Zur Vermeidung körperlicher Schäden, sowie von Sach-, Geräteschäden und
Datenverlust beachten Sie bitte folgende Hinweise:
Warnstufen
Signalwort und Sicherheitszeichen kennzeichnen die Warnstufe und geben einen sofortigen
Hinweis auf Wahrscheinlichkeit, Art und Schwere der Folgen, wenn die Maßnahmen zur
Vermeidung der Gefahr nicht befolgt werden.
GEFAHR
WARNUNG
VORSICHT
ACHTUNG
1. Gefahren durch elektrische Spannung
WARNUNG
• vor Benutzung Betriebsanleitung lesen
• vor Arbeiten am Gerät, Spannungsfreiheit sicherstellen
• Kontaktschutzblenden nicht entfernen
• Kontakt mit Spannungsführenden Komponenten vermeiden.
• Steckkontakte nicht mit spitzen und metallischen Gegenständen berühren
• Verwendung nur in dafür vorgesehenen Umgebungen
• Gerät ausschließlich mit Typenschildkonformen Netzteil betreiben!
• Gerät/Netzteil fern von Feuchtigkeit, Flüssigkeit, Dampf und Staub halten
• Eigenständige Modifikationen sind unzulässig
• Gerät nicht während eines Gewitters anschließen
• Geben Sie Ihr Gerät im Reparaturfall in den Fachhandel
2. Gefahren während Montage (wenn vorgesehen)
VORSICHT
• vor Montage, Betriebsanleitung lesen
• Kontakt mit scharfen Kanten oder spitzen Bauteilen vermeiden
• Bauteile nicht mit Gewalt zusammensetzen
• geeignetes Werkzeug verwenden
• nur gegebenenfalls mitgeliefertes Zubehör und Werkzeug verwenden
3. Gefahren durch Wärmeentwicklung
ACHTUNG
• externe Erwärmung vermeiden und Luftaustausch zulassen
• Lüfter-Auslass und passive Kühlkörper freihalten
• direkte Sonneneinstrahlung auf Gerät/Netzteil vermeiden
• ausreichend Umgebungsluft für Gerät/Netzteil sicherstellen
• keine Gegenstände auf dem Gerät/Netzteil abstellen
4. Gefahren durch Kleinstteile und Verpackung
WARNUNG
• Kleinteile, Zubehör für Kinder unzugänglich verwahren
• Plastiktüten und Verpackung für Kinder unzugänglich verwahren/entsorgen
• Kleinteile und Verpackungen nicht in Kinderhände geben
warnt vor einer unmittelbar gefährlichen Situation, die zum
Tod oder zu schweren Verletzungen führen wird.
warnt vor einer möglicherweise gefährlichen Situation, die
zum Tod oder zu schweren Verletzungen führen kann.
warnt vor einer möglicherweise gefährlichen Situation, die
zu leichten Verletzungen führen kann.
warnt vor einer möglichen Situation, die zu Sach- und Umweltschäden führen und den Betriebsablauf stören kann.
Kontakt mit elektrisch leitenden Teilen
Lebensgefahr durch Stromschlag
Scharfkantige Bauteile
Finger- oder Handverletzungen bei Zusammenbau (wenn
vorgesehen) möglich
Mangelhafte Belüftung des Geräts/Netzteils
Überhitzung und Ausfall des Geräts/Netzteils
Erstickungsgefahr
Lebensgefahr durch Ersticken oder Verschlucken
5. Möglicher Datenverlust
ACHTUNG
• Unbedingt Hinweise in der Bedienungsanleitung/Schnellinstallationsanleitung beachten
• Produkt nur verwenden, wenn Spezifikationen erfüllt sind
• Datensicherung vor Inbetriebnahme durchführen
• Datensicherung vor Anschluss neuer Hardware durchführen
• dem Produkt beiliegendes Zubehör verwenden
6. Reinigung des Gerätes
ACHTUNG
• vor Reinigung, das Gerät außer Betrieb nehmen
• aggressive bzw. scharfe Reinigungs- und Lösungsmittel sind ungeeignet
• nach der Reinigung sicherstellen, dass keine Restfeuchtigkeit vorhanden ist
• Reinigung der Geräte am besten mit trockenem Antistatiktuch durchführen
7. Entsorgung des Gerätes
ACHTUNG
Dieses auf dem Produkt und der Verpackung angebrachte Symbol zeigt an,
dass dieses Produkt nicht mit dem Hausmüll entsorgt werden darf. In Übereinstimmung mit der Richtlinie über Elektro- und Elektronik-Altgeräte (WEEE)
darf dieses Elektrogerät und ggf. enthaltene Batterien nicht im normalen
Hausmüll oder dem Gelben Sack entsorgt werden. Wenn Sie dieses Produkt und ggf. enthaltene Batterien entsorgen möchten, bringen Sie diese bitte
zur Verkaufsstelle zurück oder zum Recycling-Sammelpunkt Ihrer Gemeinde.
Bei Fragen kontaktieren Sie gerne unseren Support unter support@raidsonic.de oder
besuchen Sie unsere Internetseite www.raidsonic.de.
Datenverlust bei Inbetriebnahme
Unwiederbringlicher Datenverlust möglich
Schädigende Reinigungsmittel
Kratzer, Farbveränderungen, Feuchteschäden oder Kurzschluss
am Gerät
Umweltverschmutzung, Wiederverwertung nich t möglich
Mögliche Umweltbelastung durch Bestandteile,
Recyclingkreislauf unterbrochen
Safety information IB-DK4025-CPD
Please read carefully the following information to prevent injuries, damage to
material and device as well as data loss:
Warning levels
Signal words and safety codes indicate the warning level and provide immediate
information in terms of the probability of occurrence as well as the type and severity of the
consequences if the measures to prevent hazards are not complied with.
DANGER
WARNING
CAUTION
IMPORTANT
1. Risk of electrical shock
WARNING
• Read the operating instructions prior to use
• Make sure the device has been de-energised prior to working on it
• Do not remove contact protection panels
• Avoid contact with conducting parts
• Do not bring plug contacts in contact with pointed and metal objects
• Use in intended environments only
• Operate the device using a power unit meeting the specifications of the type plate only!
• Keep the device/power unit away from humidity, liquid, vapour and dust
• Do not modify the device
• Do not connect the device during thunderstorms
• Approach specialist retailers if you require repairs
2. Hazards during assembly (if intended)
CAUTION
• Read the operating instructions prior to assembly
• Avoid coming into contact with sharp edges or pointed components
• Do not force components together
• Use suitable tools
• Use potentially enclosed accessories and tools only
3. Hazards caused by a development of heat
IMPORTANT
• Prevent externally heating up components and ensure an exchange of air
• Do not cover the fan outlet and passive cooling elements
• Avoid direct sunlight on the device/power unit
• Guarantee sufficient ambient air for the device/power unit
• Do not place objects on the device/power unit
4. Hazards caused by very small parts and packaging
WARNING
• Keep small parts and accessories away from children
• Store/dispose of plastic bags and packaging in an area that is inaccessible to children
• Do not hand over small parts and packaging to children
Warns of a directly hazardous situation causing death or serious injury.
Warns of a potentially hazardous situation that may cause
death or serious injury.
Warns of a potentially hazardous situation that may cause
minor injury.
Warns of a potential situation that may cause material or
environmental damage and disrupt operative processes.
Contact with parts conducting electricity
Risk of death by electrical shock
Sharp components
Potential injuries to fingers or hands during assembly (if
intended)
Insufficient device/power unit ventilation
Overheating and failure of the device/power unit
Risk of suffocation
Risk of death by suffocation or swallowing
Safety information IB-DK4025-CPD
5. Potential data loss
IMPORTANT
• Always comply with the information in the operating instructions/quick installation guide
• Exclusively use the product once the specifications have been met
• Back up data prior to commissioning
• Back up data prior to connecting new hardware
• Use accessories enclosed with the product
6. Cleaning the device
IMPORTANT
• Disconnect the device prior to cleaning
• Aggressive or intense cleaning agents and solvents are unsuitable
• Make sure there is no residual moisture after cleaning
• We recommend cleaning devices using a dry, anti-static cloth
7. Disposing of the device
IMPORTANT
This icon on product and packaging indicates that this product must not be
disposed of as part of domestic waste. In compliance with the Waste Electrical and Electronic Equipment Directive (WEEE) this electrical device and
potentially included batteries must not be disposed of in conventional, domestic waste or recycling waste. If you would like to dispose of this product
and potentially included batteries, please return it to the retailer or your local
waste disposal and recycling point.
If you have any questions, please do not hesitate to contact our support at
support@raidsonic.de or visit our website at www.raidsonic.de.
Data lost during commissioning
Potentially irreversible data loss
Harmful cleaning agents
Scratches, discolouration, damage caused by moisture or
short circuit in the device
Environmental pollution, unsuitable for recycling
Potential environmental pollution caused by components,
recycling circle interrupted
Manual IB-DK4025-CPD
Type-C™ Notebook DockingStation
The USB Type-C
With this DockingStation you can extend a USB Type-C
Alt Mode supported computer to one more display and USB peripherals, memory cards,
speaker and microphone through one USB Type-C™ cable. Adopting Power Delivery
charging technology, upstream charging function through the Type-C™ interface, you can
charge the connected notebook by using your existing Type-C
Features
• Premium aluminium enclosure with high-gloss glass surface at the top
• Data transfer, video and Power Delivery via one integrated Type-C
• HDMI® video interface supports resolutions up to 3840x2160@30 Hz
• Mirroring and extending of a notebook display
• One USB 3.0 Type-C™ and two USB 3.0 Type-A interfaces,
• One USB Type-C™ interface supports only Power Delivery (no data transfer)
• Single-LUN card reader for SD 3.0 and microSD 3.0 (UHS-I) cards up to 100 MB/s
• Bus powered, no power supply necessary
• 3.5 mm stereo combo jack (headset)
Package content
IB-DK4025-CPD, pouch, quick installation guide
™
multi DockingStation is designed for extra connectivity demands.
data transfer rates up to 5 Gbit/s
™
host interface and DisplayPort™
™
power supply at once.
™
cable
Side view
1.
Front view
Rear view
2.3.
4.5.6.7.
1. USB 3.0 Type-C™ data interface
2. 1x Headset interface
3. 2x USB 3.0 Type-A data interface + 1.5 A charging
4. USB Type-C
5. High Speed HDMI
6. microSD 3.0 card reader (UHS-I)
7. SD 3.0 card reader (UHS-I)
™
only for Power Delivery (PD) up to 20 V@5 A
®
interface up to 3840x2160@30 Hz
Manual IB-DK4025-CPD
Starting up
1. Connect USB Type-C
™
cable
2. Connect your devices to the appropriate interfaces on the dock
HDMI
Usage of memory card slots
Insert the SD card into the SD card slot with the bevelled corner in front of it. The golden
PIN’s of the card must be directed downwards.
microSD card (UHS-I)
Insert the microSD card into the microSD card slot with the bevelled corner in front of it. The
golden PIN’s of the card must be directed upwards.
Single-LUN - the card reader can only work with one memory card at a time
™
Note: In order to power and charge your connected laptop, its USB Type-C
support USB Power Delivery or Thunderbolt 3™.
Requirements
- Host notebook with an available USB Type-C™ port (to ensure full dock functionality, the
host USB Type-C™ port must support USB Power Delivery and DisplayPort™ Alt Mode or
™
Thunderbolt
3).
Note: The DockingStation can still connect to a host laptop with a USB Type-C
that doesn’t support Power Delivery (must still support DisplayPort™ Alt Mode). In this
configuration, the DockingStation will not provide power to your host laptop.
- HDMI® enabled display(s) with cables as needed (for additional external displays)
- A 4K-capable display is required to achieve 3840x2160@30 Hz resolution
- Any of the following operating systems: Windows®, macOS®
USB Type-C™
Not all USB Type-C™ ports support the full functionality of the USB Type-C™ standard.
Some ports might only provide data transfers, and might not support video or Power
Delivery over USB.
To use this dock to its full potential, ensure that the host USB Type-C™ port from your computer supports DisplayPort™ Alt Mode, as well as USB Power Delivery or Thunderbolt 3™.
Install and use the DockingStation
The dock will automatically install some of the required drivers once it is connected to your
laptop’s USB Type-C™ port. If you receive a prompt to automatically install the driver(s),
follow the on-screen instructions to complete the installation.
port must
™
port
Connect your devices to the appropriate ports on the dock. Connect your external
Manual IB-DK4025-CPD
display(s) to the dock’s video port(s).
Note: Video output capabilities are dependent on the video card and hardware specifications of your connected host laptop. Certain video cards have limited MST support,
while some monitors will also limit the available resolution.
Configure a display device
Please setup your display settings accordingly to your operating system and requirements.
For detailed information, see the corresponding operation manual and description of your
operating system.
Supported video resolutions
The DockingStation supports 4K HD resolution if the connected HDMI® display supports it.
Number of displays supported Video output configuration Max. resolution/monitor
1 HDMI
Important:
1. When connecting the USB Type-C plug of the IB-DK4025-CPD to a Chromebook,
the mouse to be connected to the USB 3.0 Type-A port will not work immediately; it will
have seconds’ delay. This problem also occurs in other similar Type-C™ adapter (including
Apple original 3 in 1 adapter) when connected to Chromebook.
2. Attention! When plugging in and out an adapter to the Type-C
IB-DK4025-CPD, the connected USB devices will get disconnected flashily and then
reconnect in a few seconds, so to prevent possible data loss or corruption, avoid (dis-)
connecting the PD adapter from AC power while transferring data.
®
3820x2160@30 Hz
™
interface of the
Handbuch IB-DK4025-CPD
Type-C™ Notebook DockingStation
Die USB Type-C
Delivery Technologie, ist für den Anschluss an einen Computer (z.B. Laptop, Notebook,
etc.) mit Type-C
um einen zusätzlichen Monitor, sowie externe Peripherie per USB, SD Kartenschächten
und Audioschnitstelle anschließen zu können und den Computer gleichzeitig über eine
Power Delivery Type-C Schnittstelle mit Strom zu versorgen.
Merkmale
• Premium Aluminium Gehäuse mit hochglanz Oberfläche
• Datentransfer, Video und Power Delivery über ein integriertes Type-C™ Kabel.
• HDMI® Videoschnittstelle unterstützt Auflösungen bis zu 3840x2160@30 Hz
• Spiegelung und Erweiterung des vorhandenen Notebookbildschirms
• Ein USB 3.0 Type-C™ und zwei USB 3.0 Type-A Schnittstellen,
• Ein USB Type-C™ Schnittstelle unterstützt nur Power Delivery
• Single-LUN SD 3.0 (UHS-I) und microSD 3.0 (UHS-I)
• Stromversorgung über USB, kein Netzteil notwendig
Multi DockingStation von ICY BOX in elegantem Design und mit Power
™
Schnittstelle und DisplayPort™ Alt Mode Unterstützung entwickelt worden
Datentransferraten bis zu 5 Gbit/s
(keine Datenübertragung)
Kartenleser für Datenübertragungen bis zu 100 MB/s
1.
Vorderansicht
2.3.
Rückansicht
4.5.6.7.
1. Datenschnittstelle
2. 1x Headset Schnittstelle
3. 2x USB 3.0 Type -A data Datenschnittstelle + 1.5 A aufladen
4. USB Type -C
5. High Speed HDMI
6. microSD 3.0 Kartenleser (UHS-I)
7. SD 3.0 Kartenleser (UHS-I)
™
only for Power Delivery (PD) nur für PD bis zu 20 V@5 A
®
Schnittstelle bis zu 3840x2160@30 Hz
Handbuch IB-DK4025-CPD
Inbetriebnahme
1. USB Type-C
™
Kabel anschließen
2. Schließen Sie Ihre Perepheriegeräte an die entsprechenden Schnittstellen an.
HDMI
Verwendung der Speicherkartenschächte SD card (UHS-I)
SD Karte (UHS-I)
Schieben Sie die SD Karte mit der abgeschrägten Ecke voraus in den SD-Kar tenschacht.
Die goldenen Kontaktpunkte zeigen dabei nach unten.
microSD Karte (UHS-I)
Schieben Sie die microSD Karte mit der abgeschrägten Ecke voraus in den microSD
Kartenschacht. Die goldenen Kontaktpunkte zeigen dabei nach oben.
Single-LUN - Der Kartenleser kann nur mit einer Speicherkarte zurzeit arbeiten
Hinweis: Damit Ihr Laptop mit Strom versorgt und auch geladen wird, muss dessen USB
™
Schnittstelle USB Power Delivery oder Thunderbolt 3™ unterstützen.
Type-C
Anforderungen
- Host Laptop mit freier USB Type-C™ Schnittstelle (um den vollen Funktionsumfang zu
gewährleisten muss der verwendete USB Type-C™ Anschluss USB Power Delivery und den
DisplayPort™ Alt Mode oder Thunderbolt 3™ unterstützen)
Hinweis: Die DockingStation kann auch an Host Laptops mit USB Type-C
OHNE Power Delivery Unterstützung genutzt werden (DisplayPort
hin benötigt). In diesem Falle kann das Notebook NICHT über die Type-C™ Schnittstelle
mit Strom versorgt werden.
- HDMI® Monitor mit entsprechenden Verbindungskabeln (wenn zusätzliche externe
Monitore verwendet werden sollen)
- 4K-fähigen Monitor um die volle Auflösung von 3840x2160@30 Hz erreichen zu
können
- Unterstützte Betriebssysteme: Windows®, macOS®
™
USB Type-C
Nicht alle USB Type-C
des USB Type-C™ Standards. Einige Schnittstellen ermöglichen unter Umständen lediglich
Datenübertragung, aber eventuell keine Videoübertragung oder Stromversorgung via
USB. Um das volle Potential der IB-DK4025-CPD ausschöpfen zu können, vergewissern
Sie sich, dass Ihre Host USB Type-C
Power Delivery oder Thunderbolt
™
Schnittstellen am Markt unterstützen den vollen Funktionsumfang
™
Schnittstelle den DisplayPort™ Alt Mode und USB
™
3 Type-C™unterstützt.
™
Schnittstelle
™
Alt Mode wird weiter-
Handbuch IB-DK4025-CPD
Installieren und Verwenden der DockingStation
Nach dem Anschließen der IB-DK4025-CPD werden automatisch benötigte Treiber installiert bzw. aktualisiert. Um die Installation abzuschließen, folgen Sie den Anweisungen, falls
während der automatischen Installation dazu aufgefordert werden sollten.
Schließen Sie Ihre Perepheriegeräte an die entsprechenden Schnittstellen an. Verbinden
Sie bei Bedarf einen zusätzlichen Monitor mit dem Videoanschluss der IB-DK4025-CPD.
Hinweis: Die Videoausgabemöglichkeiten hängen von der verwendeten Grafikkarte und
weiteren Hardwarespezifikationen des angeschlossenen Host Computers ab. Bestimmte
Grafikkarten verfügen nur über eingeschränkte MST- oder Videounterstützung, während
auch einige Monitore nur geringere Auflösungen unterstützen.
Monitoreinrichtung
Zur optimalen Einstellung Ihrer Anzeigeeinheiten gehen Sie bitte entsprechend Ihres
Betriebssystems und Ihrer Bedürfnisse vor. Genauere Informationen entnehmen Sie bitte
dem Handbuch und Beschreibungen ihres Betriebssystems.
Unterstützte Videoauflösungen
Die IB-DK4025-CPD unterstützt 4K Ultra HD Auflöungen, wenn der angeschlossene
1. Wird die IB-DK4025-CPD über die USB Type-C™ Schnittstelle eines Chromebooks
angeschlossen, wird eine per USB Type-A angeschlossene Maus nicht sofort erkannt; die
Verbindung wird mit einigen Sekunden Verzögerung hergestellt. Dies geschieht auch mit
anderen Type-C™ Adaptern (inclusive Appleadaptern) wenn diese an einem Chromebook
angeschlossen werden.
2. Achtung! Beim Verbinden bzw. Entfernen eines PD Netzteils über die Type -C™ Schnittstelle der IB-DK4025-CPD, werden die anderen verwendeten Schnittstellen unter Umständen kurzzeitig getrennt und sofort wieder verbunden. Um Datenverlust während einer
Datenübertragung, Streamunterbrechungen oder ähnliches zu vermeiden, verbinden oder
entfernen sie die PD Stromversorgung NICHT, während Datenübertragungen stattfinden.
The information contained in this manual is believed to be accurate and reliable. RaidSonic
Technology GmbH assumes no responsibility for any errors contained in this manual. RaidSonic
Technology GmbH reserves the right to make changes in the specifications and/or design of
the above-mentioned product without prior notice. The diagrams contained in this manual may
also not fully represent the product that you are using and are there for illustration purposes only.
RaidSonic Technology GmbH assumes no responsibility for any differences between the product
mentioned in this manual and the product you may have. DisplayPort™ and the DisplayPort™ logo
are trademarks owned by the Video Electronics Standards Association (VESA®) in the United
States and other countries. The terms HDMI® and HDMI® High-Definition Multimedia Interface,
and the HDMI® logo are trademarks or registered trademarks of HDMI® LA, Inc. in the United
States and other countries. Apple and macOS are registered trademarks of Apple Computer Inc.
Microsoft, Windows and the Windows logo are registered trademarks of Microsof t Corporation.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.