INSTRUCTIONS
PTT SWITCH CABLE
VS-4LA VS-4MC
VS-4SC VS-5MC
Thank you for choosing this Icom product. READ ALL
INSTRUCTIONS carefully and completely before using
this product.
FEATURES
• Outstanding protection against dust and water and is
equivalent to IP54 (Except for headset connector). The cable has splash resistance and dust-tight construction that
prevents the ingress of dust.
• Easily enable the PTT switches by touch.
• Transmit status indicator for the PTT hold switch.
• VOX function (For only VS-5MC).
SPECIFICATIONS
Power supply requirement:
Supplied by the transceiver
Dimensions:
0.9 (W) × 2.2 (H) × 0.5 (D) inches
(Cable, bush and rotary clip are not included)
Weight (Approximately):
50 g, 1.8 oz
Cable Length (Approximately):
100 cm, 39.3 inches
All stated specifications are subject to change without
notice or obligation.
22.5 (W) × 56.0 (H) × 12.5 (D) mm,
PRECAUTIONS
R
WARNING! NEVER place any heavy object on the
cable, or pinch it.
DO NOT drop the cable on a hard surface.
If the switch case
is deformed, strained, or cracked, the protection against dust
and water may not be maintained.
DO NOT expose the cable to direct sunlight. It may deform
or discolor the cable.
DO NOT use the clip on clothing that might get damaged.
Be sure to turn OFF the transceiver’s power before attaching
or detaching the headset. Otherwise a malfunction may occur, or it may damage the transceiver, headset, or the cable.
Use with only the specified Icom transceiver or headset. Otherwise it may damage the transceiver, headset, or cable.
Keep the cable out of the reach of children.
DISPOSAL
The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the
European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries)
must be taken to designated collection locations at the end
of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the
laws in your area.
DESCRIPTION
The optional HS-94, HS-95 or HS-97 is required.
Rotary Clip
Easily attached to your pocket or
collar.
Transceiver
(Refer to the Icom website for compatible transceivers.)
Connection
VS-4LA VS-4MC/VS-5MC VS-4SC
PTT Push switch
Hold to transmit, release to receive
Disabled while the status indicator is lit.
VS-4/VS-5
series
NOTE: Adjust the mic gain if other stations have difficulty hearing your voice. Refer to the instruction manual of your transceiv er
for details, or contact your Icom dealer or distributor for advice.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France,
Spain, Russia, Australia, New Zealand, and/or other countries.
PTT Toggle switch
Push to toggle between transmit and receive.
The status indicator lights red while this switch is ON.
Status indicator
When the PTT Toggle switch is:
ON : Lights red
OFF : Not lit
The indicator does not light
when the PTT Push switch is
pushed.
Headset (Option)
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
A-7113D-1EX-q
2013–2017 Icom Inc.
©