Icom IC-F5061, IC-F6061D, IC-F5061D, IC-F6061 User Manual

*

Conventional/LTR™/Digital

—

Multi-Mode Professional Mobile

The IC-F5061/D series is ideal for public safety, business & industry, transportation and delivery service users. It offers advanced

multi-mode operation, improved scanning and flexible installation that is suitable for mobile and base stations.

With UT-126H ins talled. Alre ady installed t o IC-F5061, IC-F6061 “D” v ersion s.

*

VHF TRANSCEIVERS

W

iC-f 5061 /d

UHF TRANSCEIVERS

iC-f6061 /d

50

45

W

The above photo includes optional separation kit, RMK-3, and separation cable, OPC-609.

PTT ID, selective call (Selcall) and emergency call features are available with the
built-in MDC signaling.
The PTT ID function sends your unit ID number when you push (or release) the
PTT button. The received ID number can be decoded as a user name using the
alias table. Selective calling enables you to call individuals or groups, depending
on your needs. The emergency call feature allows you to send and repeat an
emergency message to dispatch until the dispatch responds to it. In these
situations, the radio can transmit anything the microphone hears and the
dispatcher can monitor the background sounds. Radio check, status, message,
radio stun/revive and call log features are also available.

IDAS system digital mode ready

(Icom Digital Advanced System)

IDAS
Icom’s digital land mobile radio system
using the NXDN™ common air
interface. It has useful calling features
including selective calling, status
message, radio stun/revive/kill, etc,. The
IC-F5061 series provides 2 optional
slots: one for the UT-126H digital unit
and one for an additional option board.

See the IDAS brochure for details.

is

Detachable front panel

With the optional remote control kit,
RMK-3 and separation cable, the front
panel of the radio can be detached from
the main unit. It allows for flexible instal­lation even in limited installation space.
Separation cable length is selectable from

1.9m, 3.0m and 8.0m*.

* 6.2ft, 9.8ft and 26.2ft respectively.

Dot matrix, multi-function LCD

With a high contrast dot matrix display,
upper and lower case characters can be
easily distinguished. You can change the
display setting to show one line and 12
characters, or two lines and 24 characters
via programming. LCD backlighting is
standard.

Two line setting display example.

Front mounted speaker

4 watts (typ.) front mounted speaker deliv­ers clear and loud audio. The built-in audio
compander improves the signal to noise
ratio.

IP54 dust-protection and
splash resistance

The rugged die-cast chassis and poly­carbonate front panel are resistant to
shock and vibration. When used with the
optional separation kit, the remote con­trol head has dust-protection and splash
resistant construction, equivalent to IP54.

(Controller only)

Wide frequency range and
large channel capacity

The IC-F5061 series covers a wide fre­quency range in one version (VHF 136–174
MHz, UHF 400 – 470MHz or 450 –512 MHz).
The 512 memory channel capacity with 128
zones allows you to divide and store a vari­ety of flexible channel groupings.

Basic LTR™/Conventional mode
operation

Group, selective, and phone calls are all
available in LTR
trunking operation without the need for
any optional module.

™

mode. Get efficient

Multiple 2-Tone, 5-Tone
signalings

The built-in 2-Tone and 5-T one capabili­ties allows you to send a tone code with
your call and decode multiple tone codes
on a channel. 40 pairs of CTCSS/ DTCS
memory channels are available.

Voting mode scan

The voting scan detects the signal
strength level of repeater sites and au­tomatically selects the strongest station
or the first station to exceed the preset
signal level. This is useful for roaming
between 2 or more repeater sites.

Enhanced scanning

While scanning, you can program which Tx
channel you want when you press PTT
button. Start channel, last detected chan­nel, priority or a prepr ogrammed channel
are selectable. In addition, the nuisance
delete function temporary removes a busy
channel from the scanning list.

Built-in inversion-type voice
scrambler

The built-in inversion type voice scrambler
provides secure conversation. When a
more secure system is required, the 32
code non-rolling-type voice scrambler UT­109R and 1020 code rolling type UT-110R
are available as an option.

* Inversion type voice scrambler is not compat-

ible with UT-109/UT-110 voice scrambler.

D-sub accessory connector

The IC-F5061 series has a D-SUB 25 pin
ACC connector for connecting various
external devices.

Other features

•

Advanced scanning functions including Tx
channel, talk back and mode dependent scan

• 8 DTMF autodial memories and ANI func-

tion with DTMF

• Heavy duty, dynamic microphone HM-148

• Power on password • Embedded ESN

• Radio stun, kill and revive functions disable

or re-enable a lost or stolen unit over the air

• Busy repeater lockout function

• Surveillance function temporarily turns off

the LED backlight and beep sound

• Convenient key assign sticker is supplied

• Microphone hanger action programmable

• Ignition sensing line

• ±1ppm frequency stability

• Lone worker function

• Escalarting alert

• Flash CPU for future upgrade and more...

VHF AND UHF TRANSCEIVERS

CACHET REVENDEUR

ICOM FRANCE

Zac de la Plaine - 1, Rue Brindejonc des Moulinais
BP 45804 - 31505 TOULOUSE CEDEX 5
Tél : [phone] - Fax : [phone]

WEB ICOM : http://www.icom-france.com
E-mail : [e-mail]

Les spécifications et informations données dans ce document peuvent être modifiées sans préavis.

SPECIFICATIONS

GENERAL

• Frequency range :
IC-F5061 136–174MHz

IC-F6061 400–470MHz,

• Number of channels : 512 channels/ 128 zones

• Channel spacing : 12.5/25kHz, 1 5/30kHz

• PLL channel step : 2.5kHz, 3.125kHz

• Antenna impedance : 50Ω

• Operating Temp. range :

•

Power supply requirement

• Current drain (approx) :
Tx 50W/45W 14.0A
Rx Max. audio 1200mA
Stand-by 300mA

• Dimensions (

(projections not included) ; 6

• Weight

Measurements made in accordance with EIA-152C/204D,
TIA-603 (for Analog). All stated specifi cations are subject to
change without notice or obligation.

W×H×D) : 160×45×150 mm

(approx.) : 1.31kg; 2.9lb

450–512MHz

6.25kHz

(option)

–30˚C to +60˚C

; –22˚F to +140˚F

: 13.6V DC nominal

5

⁄16 ×125⁄32 ×529⁄32 in

TRANSMITTER RECEIVER

• Output power

•

Max. frequency deviation

• Frequency error : ±1.0ppm

• Spurious emissions : 75dB

• FM Hum and Noise : 46/40dB typ. (Wide/Narrow)

• Adjacent channel power : 70/60dB min. (Wide/Narrow)

•

Audio harmonic distortion

• Modulation limiting : 70–100% of Max. deviation
Ext. microphone impedance

•

Applicable U.S. Military Specifi cations

The IC-F5061/F6061 and RMK-3 have been tested to and passed the follow­ing MIL-STD requirements and strict environmental standards.

Standard

Low Pressure 500.4 I, II
High Temperature 501.4 I, II
Low Temperature 502.4 I, II
Temperature Shock 503.4 I
Solar Radiation 505.4 I
Rain (Blowing/Drip)* 506.4 I, III
Humidity 507.4 –
Salt Fog 509.4 –
Dust Blowing 510.4 I
Vibration 514.5 I
Shock 516.5 I, IV

* Rain tests were performed on the controller and RMK-3 only.
Also meets equivalent MIL-STD-810-C, -D, and -E.

(approx) : 50W (VHF)

45W

(UHF)

: ±5.0/2.5kHz (Wide/Narrow)

typ.

: 3% typ. (40% deviation)

: 600Ω (8-pin modular)

MIL 810 F

Method

Proc.

• Sensitivity FM (W/N) : 0.25μV typ. (at 12dB SINAD)
Digital : 0.20μV typ. (at 5% BER)

• Squelch sensitivity : 0.25μV typ. (at threshold)

• Adjacent channel : 85/75dB

typ. (Wide/Narrow)

selectivity

• Spurious response : 90dB

typ.

• Intermodulation : 77dB typ.

• Hum and noise ratio : 50/45dB typ. (Wide/Narrow)

• Audio output power : 4W typ. at 5% distortion with a

•

External speaker connector

4Ω load

: 2-conductor 3.5 (d) mm

1

(

⁄8″)/4Ω

Supplied Accessories

• Hand microphone, HM-148 • DC power cable

• Microphone hanger • Mounting bracket kit

• Key assign stickers

OPTIONS

HAND MICROPHONES

HM-152 : Regular hand microphone.
HM-152T : DTMF microphone.
HM-148 : Heavy duty dynamic microphone. Same as supplied.

SEPARATION KIT

RMK-3 : For front panel detachment installation.

Use with one of the following cables: OPC-609 (1.9m; 6.2ft), OPC-607 (3m; 9.8ft), or OPC-608 (8m; 26.2ft).

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
NXDN is a trademark of Icom Incorporated and Kenwood Corporation. LTR is a trademark of E.F. Johnson Company. All other trademarks are the properties of their respective holders.

Some options may not be available in some countries. Please ask your dealer for details.

DESKTOP MICROPHONE

HM-152 HM-152T

HM-148

Convenient for dispatching,
equipped with monitor switch.

SEPARATION CABLES

RMK-3

OPC-609

(1.9m; 6.2ft)

OPC-607

(3m; 9.8ft)

SM-25

OPC-608

(8m; 26.2ft)

EXTERNAL SPEAKERS

SP-5 SP-22

SP-5 : Large external speaker.
SP-10 : Mid sized external speaker.
SP-22 : Compact and easy-to-install external speaker.

SP-10

INTERNAL UNITS

UT-109R

VOICE SCRAMBLER UNIT

UT-109R : Non-rolling type. Up to 32 scrambling codes are available.
UT-110R : Rolling type.
UT-126H : Digital unit. Provides IDAS digital capability.

UT-110R

VOICE SCRAMBLER UNIT

Up to 1020 scrambling codes are available.

UT-126H

DIGITAL UNIT

.