The IC-F5023/H series is ideal for small-to-mid sized
systems for public safety, large industry to light commercial users.
The IC-F5023/H series offers multiple signaling, advanced scanning, improved external channel control
capability and wide frequency coverage packed in a
compact body . This rugged mobile easily exceeds your
expectations with its reliable performance and communication quality.
Features,
Performance,
Value
For the Everyday
LMR User
50W
25W
45W
25W
VHF TRANSCEIVERS
UHF TRANSCEIVERS
iC-f5023
iC-f5023h
iC-f6023
iC-f6023h
Optional internal units
The IC-F5023/H series has a 40-pin option
slot for adding an optional internal unit. Optional voice scrambler units, UT-109R or
UT-110R provide secure private conversation. Optional DTMF decoder unit, UT108R offers DTMF decode capability.
External memory channel
control with optional ACC cable
With the optional OPC-1939 D-SUB 15pin ACC cable, the IC-F5023/H series can
be programmed to control an operating
channel from an external device
(up to 16
preprogrammed channels)
. The ACC connector also provides an ignition sensing
function, external PTT, PC command,
horn honk, audio output and modulated
signal input depending on programming.
Other features
• Wide and narrow channel spacing (25/
12.5kHz) is programmable per channel
• Embedded ESN
• ±2.5ppm frequency stability
•
Microphone hanger action programmable
• Optional DTMF microphone
(HM-152T)
• 8 DTMF autodial memories
• BIIS 1200 PTT ID transmission
• Power-on password function
• Nuisance delete function
• Time-out-timer, Lock-out penalty timer
and more
128 memory channels
128 channels (Max.) separated into 8
memory zones. Memory channels can be
identified with the 8-character channel
name and selected easily with the
up/down buttons.
Front mounted speaker
4 watts
(typ.) front mounted speaker deliv-
ers clear and loud audio. With the
speaker facing the operator, audio can be
clearly heard without impediment during
operation.
6 programmable buttons
Apair of up/down and P0–P3 function assignable buttons allow you to customize
functions to meet specific needs. An independent volume knob offers simple, convenient operation.
MIL grade rugged construction
The tough aluminum die-cast chassis and
polycarbonate front panel have been
tested to the MIL standard 810F. With this
heavy-duty construction, the IC-F5023/H
series provides reliable operation over the
long term in all manners of rugged environments.
Most popular signalings built-in
Use the built-in 2-Tone, 5-Tone, CTCSS
and DTCS capabilities as standard to set
up your own talk groups, PTT ID and
quiet stand-by when others are talking.
The IC-F5023/H series has added
CTCSS/ DTCS high speed decode and 2Tone decode accuracy.
MDC 1200 compatible
The following MDC features are available
with the built-in MDC signaling.
• PTT ID
(TX/RX) • Radio check (RX)
• Radio stun (RX) • Radio revive (RX)
• Emergency TX/RX (No ACK)
• 5 alias table (Max.)
Multiple 2-T one, Multiple 5-Tone
Up to ten 2-Tone and eight 5-Tone codes
can be decoded on a channel. When a
matched tone is received, the following
items are programmable for each code.
• Beep sound • Answer back • Scan
• Bell icon • Radio stun/kill/revive
Radio kill, stun and revive
The radio kill/stun functions disable a lost
or stolen radio over the air, eliminating security threats from undesired listeners.
When the stun command is received, all
functions will be temporary locked out
until the revive command is received or
the unlock password is entered.
Lone worker function
When the radio is not operated for a preset period, the radio sounds a beep and
requires you to push any button. If the
radio is still not operated for a specified
wait period, an emergency signal automatically transmits and informs co-workers that something may have happened
to the individual worker.
Mode dependent scan
In the mode dependent setting, the scanning setting is dependent on the operating channel. When you change the
operating channel, the scanning list automatically changes to the list set for that
channel. It is convenient when you move
to a different operating area and change
operating channel, you don’t have to
change the scanning setting.
Tx channel setting and
Talk back function
The Tx channel setting allows you to program a transmission channel while scanning.
Start channel, last detected channel, priority
and preprogrammed channel are selectable.
Prior to the Tx channel setting, the talk back
function allows you to talk on the last detected channel, while scanning resumes
after a preset time. The user can easily
make a quick response with this function.
Wide frequency coverage
The IC-F5023/H series covers a wide frequency range in one version
(VHF 136–
174MHz, UHF 400–470, 450–520MHz).
The IC-F5023/H series is designed to be
a companion to our IC-F3023 series
handheld transceiver. The number of
channels and banks, signaling formats,
programming software and voice scrambler are compatible. Take advantage of
the shared functionality to complete your
communications requirements.
Compatible with IC-F3023/F4023 series handheld
Photo includes optional OPC-1939
• Frequency range :
IC-F5023/F5023H 136–174MHz
IC-F6023/F6023H 400–470MHz,
450–520MHz
• Number of Channels : Max. 128 Ch/ 8 zones
• Channel spacing : 12.5/25kHz
• PLL channel step : 2.5kHz, 3.125 kHz
• Antenna impedance : 50Ω
(SO-239)
• Operating temp. range :
–30˚C to +60˚C
•
Power supply requirement
: 13.6V DC
• Current drain (approx.) :
Tx 50W/45W 10.0/11.0A
(VHF/UHF)
25W 5.0/5.0A (VHF/UHF)
Rx Max. audio 0.7A
Stand-by 250mA
• Dimensions (W×H×D) :
50W/45W versions 150×40×167.5 mm
25W versions 150×40×117.5 mm
(Projections not included)
•Weight :
50W/45W versions 1.1kg
(approx.)
25W versions 0.8kg (approx.)
• Output power (at 13.6V DC):
IC-F5023 25W
IC-F5023H 50W
IC-F6023 25W
IC-F6023H 45W
• Max. frequency deviation: ± 5kHz/± 2.5kHz
(W/N)
• Frequency error : ±2.5ppm
• Spurious emissions : 70dB
typ.
• Adjacent channel power : 70dB/60dB min. (W/N)
•FM Hum and Noise : 46dB/40dB typ. (W/N)
•
Audio harmonic distortion
: 3% typ. (40% deviation)
• Modulation limiting : 70–100% of Max. deviation
• External Mic. impedance: 600Ω
(8-pin modular)
• Sensitivity : 0.25µV typ. (at 12 dB
SINAD)
• Squelch sensitivity : 0.25µV typ. (at threshold)
•
Adjacent Ch. selectivity
: 75dB/65dB typ. (W/N)
• Spurious response : 80dB typ.
• Intermodulation : 75dB
typ.
• Hum and noise ratio : 50dB/45dB typ. (W/N)
• Audio output power : 4W typ. at 5% distortion with
a 4Ω load
• External SP connector : 2-conductor 3.5
(d) mm
(
1
⁄8″)/4Ω
VHF AND UHF TRANSCEIVERS
SPECIFICATIONS
GENERAL TRANSMITTER RECEIVER
All stated specifications are subject to change without notice or obligation.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia and/or other countries.
All trademarks are the properties of their respective holders.
Standard
MIL 810F
Method Procedure
Low Pressure 500.4 I, II
High Temperature 501.4 I, II
Low Temperature 502.4 I, II
Temperature Shock 503.4 I
Solar Radiation 505.4 I
Humidity 507.4 –
Settling Dust 510.4 III
Vibration 514.5 I
Shock 516.5 I, IV
Also meets equivalent MIL-STD-810-C, -D and -E.
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the
following MIL-STD requirements and strict environmental standards.
Supplied Accessories
• Hand mic. (HM-152) • DC power cable
• Mounting bracket kit • Microphone hanger
• Key assign stickers
OPTIONS
UT-108R : Provides DTMF decode capability.
UT-109R : Up to 32 scrambling codes are available.
UT-110R : Provides higher operating security. Up to 1020
(255 codes × 4 groups) scrambling
codes are available.
UT-108R DTMF DECODER
INTERNAL UNITS
Some options may not be available in some countries. Please ask your dealer for details.
EXTERNAL SPEAKERS
SP-22HM-148THM-152THM-152
HM-152 : Regular hand microphone. Same as supplied.
HM-152T : DTMF microphone.
HM-148G: Heavy duty microphone. Self-grounding type.
HM-148T : Heavy duty microphone with DTMF keypad. Self-grounding type.
HAND MICROPHONES
HM-148G
DESKTOP MICROPHONE
SM-25
Convenient for dispatching,
equipped with monitor switch.
15-pin ACC cable. For connecting with a PC, external speaker,
external channel control, ignition
sense line or vehicle’s horn.
SP-5 : Large external speaker.
SP-10 : Mid sized external speaker.
SP-22 : Compact and easy-to-install external speaker.
SP-10SP-5
ACC CABLE
OPC-1939
UT-109R
VOICE SCRAMBLER
UNIT
UT-110R
VOICE SCRAMBLER
UNIT
CACHET REVENDEUR
ICOM FRANCE
Zac de la Plaine - 1, Rue Brindejonc des Moulinais
BP 45804 - 31505 TOULOUSE CEDEX 5
Tél : 05 61 36 03 03 - Fax : 05 61 36 03 00
WEB ICOM : http://www.icom-france.com
E-mail : icom@icom-france.com
Les spécifications et informations données dans ce document peuvent être modifiées sans préavis.
Loading...