Icom IC-F5020, IC-F6020 User Manual

Series

Series

VHF AND UHF TRANSCEIVERS

An Ideal Balance of

Features, Performance and Value

The IC-F5020/F6020 series is ideal for small-to-mid sized systems for public service, large industry to light commercial users. The IC-F5020 series offers multiple signaling, advanced scanning, improved external chan- nel control capability and wide frequency coverage packed in a compact body. This rugged mobile will easily exceed your expectations with its reliable performance and communication quality.

	128 channel capacity with 8 zones		MIL-STD-810 F rugged construction
	Built-in 2-Tone, 5-Tone, CTCSS and		50 W (VHF), 45 W (UHF) (USA/EXP versions),
	DTCS (analog mode)		25 W (EUR/EXP versions) RF output power
	MDC 1200 compatible		Lone worker function

Loud and clear 4 watts (typical) front mounted speaker

External memory channel control with optional ACC cable

IC-F5020 series

FEATURES

128 memory channels

128 channels (Max.) separated into 8 memory zones. Memory channels can be identified with the 8-character channel name and selected easily with the up/down buttons.

Front mounted speaker

4 watts (typ.) front mounted speaker delivers clear and loud audio. With the speaker facing the operator, audio can be clearly heard without impediment during operation.

6 programmable buttons

A pair of up/down and P0–P3 function assignable buttons allow you to customize functions to meet specific needs. An independent volume knob offers simple, convenient operation.

MIL grade rugged construction

The tough aluminum die-cast chassis and polycarbonate front panel have been tested to the MIL standard 810-F. With this heavy-duty construction, the IC-F5020 series provides reliable operation over the long term in all manners of rugged environments.

Most popular signalings built-in

Use the built-in 2-Tone, 5-Tone, CTCSS and DTCS capabilities as standard to set up your own talk groups, PTT ID and quiet stand-by when others are talking. The IC-F5020 series also has CTCSS/ DTCS high speed decode and 2-Tone decode accuracy.

MDC 1200 compatible

The following MDC features are available with the built-in MDC signaling.

• PTT ID (TX/RX)	• Radio check (RX)
• Radio stun (RX)	• Radio revive (RX)

•Emergency TX/RX (No ACK)

•5 alias table (Max.)

Multiple 2-Tone, Multiple 5-Tone

Up to ten 2-Tone and eight 5-Tone codes can be decoded on a channel. When a matched tone is received, the following items are programmable for each code.

• Beep sound	• Answer back
• Scan	• Bell icon

• Radio stun/kill/revive

Radio kill, stun and revive

The radio kill/stun functions disable a lost or stolen radio over the air, eliminating security threats from undesired listeners. When the stun command is received, all functions will be temporary locked out until the revive command is received or the unlock password is entered.

Lone worker function

When the radio is not operated for a preset period, the radio sounds a beep and requires you to push any button. If the radio is still not operated for a specified wait period, an emergency signal automatically transmits and informs co-workers that something may have happened to the individual worker.

Mode dependent scan

In the mode dependent setting, the scanning setting is dependent on the operating channel. When you change the operating channel, the scanning list automatically changes to the list set for that channel. It is convenient when you move to a different operating area that may require a different operating channel. No need to change the scanning setting.

TX channel setting and Talk back function

The TX channel setting allows you to program a transmission channel while scanning. Start channel, last detected channel, priority and pre-programmed channel are selectable. Prior to the TX channel setting, the talk back function allows you to talk on the last detected channel, while scanning resumes after a preset time. The user can easily make a quick response with this function.

Wide frequency coverage

The IC-F5020 series covers a wide frequency range in one version (VHF 136–174 MHz, UHF 400–470, 450–520 or 450–512 MHz).

External memory channel control with optional ACC cable

With the optional OPC-1939 D-SUB 15-pin ACC cable, the IC-F5020 series can be pro-

grammed to control an operating channel from an external device (up to 16 pre-programmed channels). The ACC connector also provides an ignition sensing function, external PTT, PC

command, horn honk, audio Photo includes optional OPC-1939

output and modulated signal input depending on programming.

Other features

•Embedded ESN

•±2.5 ppm frequency stability

•Microphone hanger action programmable

•Optional DTMF microphone (HM-152T)

•8 DTMF autodial memories

•BIIS 1200 PTT ID transmission

•Power-on password function

•Nuisance delete function

•Time-out-timer and Lock-out penalty timer

Please check the website for the latest version of this brochure at www.icom.co.jp/world