Page 1
INSTRUCTIONS
CLONING SOFTWARE
CS-80/880
n Preparing
D System requirements
To use this software, the following hardware
and software are required:
PC
• Microsoft
Windows Vista® is installed
• With USB port, or RS-232C serial port
Other item
Optional OPC-478 cloni ng cable (RS-232C
type), OPC-478UC* c loning ca ble (USB type)
or OPC-1529R
232C type)
®
Windows® 2000/XP or Microsoft®
This instruction manual is described using Microsoft® Windows Vista®.
data communication cable
Note:
When using the O P C-47 8 , RS- 2 3 2 C
type c loning cable, select “Norm al” for
the cloning spee d setting in [COM por t]
menu of the cloning software. Otherwise, a
cloning error may occur.
(RS-
n Getting started
D This cl o n i n g softwa r e is de s i g n e d to
perfor m data setting and cloning for the
ID-80 series or ID-880 series transceivers.
D HEL P WINDOW: CS-8 0/8 80 ha s a he lp
window to describe functions and operation.
NOTE:
To use the OPC-478UC, USB type cloning
cable, USB dr iver i nstalla tion i s necessary. The driver is supplied with the OPC478UC. See the OPC-478UC instruction
manual for details.
* The USB driver, supplied with the OPC-478UC, is
not supported in Microsoft® Windows Vista® (64 bit).
D Before installing the software
Icom HP provides the cloning software download service.
Before installing the software, download and
unzip the following compressed file.
• File Name: CD-318801-001.zip
Depending on the revision.
This instruction manual describes when the file
name is “CD-318801-001.zip,
” for example.
n Software installation
When installing the software, log on as the
administrator.
q Make sure Windows is started and no other
applications are running.
w
Dou ble-clic k th e “ set up.exe ” c ont ain ed i n
the “CD-318801-001” folder which you have
downloaded and unzipped.
e If the “User Account Control” appears, click
[Allow] to continue.
r
The “Choose Setup Language” will appear as
shown below. Select the display language type
from ‘English’ or ‘Japanese,’ then click [Next>].
• This instruction manual is described using ‘English’
as the language option.
Select language type
Click
t The “Welcome to the InstallShield Wizard for
CS-80/880” will appear as shown below.
Click [Next>].
y The “Choose Destination Location” will ap-
pear as shown below. Click [Next>].
• Click [B rowse...] to se le ct an ot he r destination
folder before clicking [Next >], if desired.
Confirm
Click
u After the installation is completed, the “In-
stallShield Wizard Complete” will appear as
shown below. Then click [Finish].
Click
i P r ogra m gr o u p ‘C S - 8 0 _880’ appear s in
the ‘A ll P rograms ’ of the sta r t menu , and
‘CS-80_880’ short cut icon appears on the
desktop.
• You can uninstall the software through “Uninstall a
program” in the Windows Control Panel.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the
United Kingdom, Germany, France, Spain, Russia and/or other countries.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/
or other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.
Click
Page 2
n Connection
to the [SP] jack
ID-80 series
TRANSCEIVER
to USB port
OPC-478UC
(USB type)
to RS-232C port
to the [DATA] jack
OPC-1529R
(RS-232C type)
PC
OPC-478 (RS-232C type)
to RS-232C port
to USB port
to the [SP] jack
to the [DATA] jack
OPC-1529R
(RS-232C type)
PC
ID-880 series
TRANSCEIVER
OPC-478UC (USB type)
OPC-478 (RS-232C type)
All cloning operations are performed from the computer’s keyboard.
Connect the cloning cable or data communication cable as illustrated below, and then turn the
transcever's power ON.
For ID-80 series
For ID-880 series
n Repeater list importation
Please read this section before importing the
downloaded repeater list to wr ite the repeater
information to the transceiver.
Before importing the repeater list
Before importing the repeater list, download and
uncompress the following compressed file.
• File Name: 80_880_RptList_U_090201.zip
Depending on the version.
Depending on the updated date.
Thi s i nstruction m anual de sc ri bes when th e file
name is “80_880_RptList_U_090201.zip,” for example.
1. Data uploading
Before starting the impor tation,
transceiver’s data to prevent data loss.
Click , or click [Clone] in the top menu of
the cloning software and select “Read <- TR” to
start uploading.
upload all the
e The “Open” will appear as shown below. Se-
lect
“80_880_RptList_U_090201.csv” from the
unzipped folder,
then click [Open].
Select
Click
r After the screen appears as shown below,
click [OK].
• The repeater information is read into the cloning
software from the repeater list, then importation is
completed.
Click
n Initial setup screen
Afte r star ting up the CS- 80/ 880, the “ Initial
Setup” will appear as shown below.
Read the instructions thoroughly, and enter the
desired COM port number (from 1 to 256), then
click [OK] to open the cloning menu.
Click [Cancel] if you want to
and
continue programming without a transceiver.
When programming the software without a
transceiver, some items will not appear on
the setting screen, and therefore you cannot
program them.
skip
COM port
n Programming information
We recommend that you should upload all the
transceiver’s data before start entering/editing
parameters, even when the transceiver is factory fresh.
setting
Click , or click [Clone] in the top menu of the
cloning software and select “Read <- TR” to start
uploading.
NEVER tur n off the transceiver and computer
while uploading/writing cloning data. Otherwise,
the data could be cleared.
Please refer to the he lp file of the cloning
software for help with the function or setting
meaning.
To open the help file, click [Help] in the top
me nu of t h e clon ing so ftwa r e and s e lect
“Contents,” or simply push the [F1] key of the
computer’s keyboard.
2. Repeater list importation
q S e l ect
w
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan.
“Repea t e r
L i s t” fo l d e r i c on
from t he tree view
screen of the cloning software.
Select
Click
[F ile] i n the t op me nu and poin t to
“Import,” then select “All...”.
Select
3. Data writing
Write the data, including repeater information, to
the transceiver from the cloning software.
Click , or click [Clone] in the top menu of the
cloning software and select “Write -> TR” to start
writing.
A-6738-1EX
© 2009 Icom Inc.
Loading...