Page 1
●
This cloning software is designed to perform data
2730A/
Windows® 8.1.
●
System requirements
The following PC and cable are required to use the CS-2730.
PC
●
Microsoft® Windows® 8.1 (32/64 bit)*
●
Microsoft® Windows® 8 (32/64 bit)*
●
Microsoft® Windows® 7 (32/64 bit)
●
Microsoft® Windows Vista® (32/64 bit)
*Except for "RT" versions of Microsoft
or Microsoft
A USB 1.1 or 2.0 port
®
Windows® 8.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated in Japan, the United States, the United
Kingdom, Germany, France, Spain, Russia, and/or other countries.
Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or
other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.
®
Windows® 8.1
entry, settings, and cloning for the ICIC-2730E transceivers.
●
The CS-2730 has a Help file to describe functions and operations.
●
The instructions are based on using Microsoft
Cable (Purchase separately)
●
OPC-478UC CLONING CABLE
®
1
Page 2
1. Make sure Windows has completed its startup, and
click “setup.exe” contained in the unzipped
Select ‘English’ or ‘Japanese,’ and then click
“Choose Destination Location” appears, and then
7. After the installation is completed, “InstallShield
2730’ appears in the Apps
Windows
bottom left corner of the screen and click the Start
of
Software installation
When installing the software, log in as the
administrator
.
no other applications are running.
2. Download and unzip the file.
If "Security Warning" appears, click [Yes] to continue.
3. Doublefolder.
If “User Account Control” appears, click [Yes] to contin-
ue.
4. “Choose Setup Language” appears.
[Next>].
In this document, the ‘English’ option is used.
5. “Welcome to the InstallShield Wizard for CS-2730”
appears, and then click [Next>].
Wizard Complete” appears, and then click [Finish].
8. A program group ‘CSview, and the shortcut icon appears on the desktop.
For Microsoft® Windows® 7 and Microsoft®
Vista®, a program group 'CS-2730' appears on the program menu.
You can uninstall the cloning software using “Uninstall a
program” in the Windows Control Panel.
How to open the Apps view
1. Go to the Start screen.
In Microsoft® Windows® 8, move the mouse cursor to the
screen thumbnail.
2. Move the mouse cursor to the bottom left corner
the Start screen and click .
6.
click [Next>].
If desired, click [Browse...] to select another destination
folder before clicking [Next >].
3. The Apps view is displayed.
2
Page 3
1. Push [ ] to turn OFF the transceiver.
Read the Initial Setup instructions thoroughly before
enter the COM port number into the box.
478UC Instruction manual
Click [Cancel] if you want to skip the COM port setting
If the transceiver's version information is not
correctly sent to the software, some items may not be
After you click [OK], the "Initial Setup" screen will be
If one of the error screens shown below appears and
you cannot read from or write to the transceiver, repeat
2730 Initial Setup'
●
To prevent data loss, you should first read (down-
iting parameters using the cloning software, even
, or [Clone] in the top menu of the cloning
TR” to start
he cable. Otherwise, the data could be lost or
corrupted.
●
Before editing or entering, make a backup file onto
your PC. A backup file allows easy restoring if the
cloning software and select “Contents,” or simply push
Before connecting the OPC-478UC to a PC
To use the OPC-478UC CLONING CABLE, you must install a USB driver.
The USB driver is on the CD supplied with the cable.
Read the OPC-478UC Instruction manual carefully before installing the driver.
Connection
2. Connect the OPC-478UC cable as illustrated below.
3. Turn ON the transceiver.
Initial setup screen
Starting "Initial Setup" again
The first time you start up the cloning software, the "Initial Setup" screen will appear as shown below.
the steps in Initial setup screen, to the left.
●
using the software.
Select the correct COM port number from the dropdown
list, or directly
(If necessary, see the OPC-
To display "Initial Setup," click 'CSicon in a program group 'CS-2730.'
●
Select the program group, as described in "■ Soft-
ware installation" Step 8.
to check the COM port.)
Click [OK] to open the application screen.
and continue without connecting a transceiver.
NOTE:
displayed on the sheets.
skipped the next time you open the software.
Programming information
load) all the transceiver’s data before entering or ed-
when the transceiver is factory fresh.
Click
software, and then select “Read <downloading.
●
While reading or writing cloning data,
OFF the transceiver or the PC, and
nect t
NEVER
NEVER
turn
discon-
setting data in the transceiver is accidentally deleted.
Please refer to the cloning software's Help file for assistance with the functions or settings.
To open the Help file, click [Help] in the top menu of the
the [F1] key on the PC’s keyboard.
A-7196-1EX
© 2014 Icom Inc.
3
Loading...