Parts Number: 05L2163
ThinkPad 770E/770ED
Quick Reference and Service Information
Your Name:
Company Name:
Model Number:
Serial Number:
Company or Reseller Service:
IBM Service Web Site:
IBM Service Number:
The IBM Service Number for your country can be found in the
International Hardware Service Information booklet shipped with
your computer.
Notes:
Location
LCD indicator
panel
TrackPoint
Click buttons
Bay eject levers
LED
PC card slots
UltraBay II
Telephone
jack
Replacing the UltraBay II
Device
You want to... You need to...
swap the device in
the UltraBay II
attach the diskette
drive externally
Note:
Some devices or configuration might not support Hot
plug.
If the LED is blinking orange, you cannot operate.
Function Keys
Fn+ Result
F2 Displays the battery power status indicator or
erases it when it is being displayed. (The Fuel
program must first be activated.)
F3 Places the computer in standby mode.
F4 Places the computer in suspend mode.
F7 Changes computer display output locations.
F8 Changes computer LCD modes.
F11 Changes the power modes during battery-power
operation
F12 Places the computer in hibernation mode.
release the bay eject levers; then a
message appears. Make sure the
LED stays on green and there is no
beep; then swap the device.
power off your computer; then
attach the external diskette drive.
Copyright IBM Corp.1998
Getting Service
Always read the Troubleshooting chapter of your
User's Guide or Online Book before calling IBM.
During the warranty period, you can get help and
information from the IBM PC Support Line in your
country. Before you call, fill out the front of this
card. Also have:
The exact wording of any error messages
Hardware and software configuration information
A description of the problem
Information and serial numbers of any options
installed on your system
International Warranty
Service
Before you travel outside of the country where you
purchased your ThinkPad, you should register for
international warranty service. Using the online
product registration does not automatically register
you for international service.
See the International Service Information booklet
shipping with your computer.
Battery Status
You can see the battery status by Fuel program. To
start the Fuel program, click on Start, select Pro-
grams and ThinkPad, and click on Fuel.
ThinkPad Configuration
Program
You can customize your hardware system settings
with the ThinkPad Configuration program. To start
the ThinkPad Configuration program, click on Start
select Programs and ThinkPad, and double-click on
ThinkPad Configuration.
Power Management: To manage your battery
power efficiently, you can set the power-saving mode
with the ThinkPad Configuration program. Click on
the Power Management button (
on the Power Management tab.
TrackPoint Setting: You can customize such
TrackPoint functions as Press-to-Select, Sensitivity,
and Scrolling.
Click on the TrackPoint button (
) and then click
).
For Further Information
See the following table and find the information you
want to know.
If you want to... See the...
Know how to use the
Recovery CD
Know how to use the
Customization CD
Reinstall the operating system or hardware device drivers
Know about hot or
warm plug and
unplug functions
Register your computer
Back up your computer
Be aware of hints,
tips, or limitations for
using your computer
Solve system resource
conflict
Solve a problem ThinkPad 770 User's Guide or the
Use modem features ThinkPad 770E/770ED User's
Note: To see the online book, click on Start move the
cursor to Programs, ThinkPad 770E/770ED; then click on
ThinkPad 770E/770ED User's Guide.
ThinkPad 770E/770ED User's
Guide Supplement
ThinkPad 770E/770ED User's
Guide Supplement
Online book
Attention
Print the software installation
section of the Online book
before you format the hard
disk drive.
ThinkPad 770 User's Guide and
ThinkPad 770E/770ED User's
Guide Supplement
ThinkPad 770E/770ED User's
Guide Supplement
ThinkPad 770E/770ED User's
Guide Supplement
ThinkPad 770E/770ED User's
Guide Supplement or Online book
Online book
Online book
Guide Supplement
Help: For more information, click on the Help
button (
).