9514 - BXX Multimode
TFT LCD Color Monitor
User's Setup Guide
.
.
.
...
.
.
..
.
.
.
.
.
These user’s setup instructions cover typical user environments. The on-screen
messages may differ depending on the level of your hardware and software. In some
cases you may need to vary the setup procedures.
For more information, refer to your computer or operating system manuals or consult
your system administrator or dealer.
Ces instructions de configuration d’exploitation s’appliquent aux environnements
d’utilisation types. Les messages affichés à l’écran peuvent varier en fonction du niveau
de votre matériel et de vos logiciels informatiques. Dans certains cas, vous pouvez être
amenés à changer de procédures de configuration.
Pour de plus amples informations à ce sujet, veuillez vous reporter aux manuels de votre
ordinateur et de votre système d’exploitation, ou consultez l’administrateur de votre
système ou votre revendeur.
Diese Anweisungen für die Einstellung durch den Benutzer gelten für typische
Betriebsumgebungen. Die Bildschirmmeldungen können je nach Art der verwendeten
Hardware und Software auch anders lauten. In einigen Fällen müssen die
Einstellungsschritte unter Umständen abgeändert werden.
Weitere Informationen finden Sie im Computer- oder Betriebssystemhandbuch, oder
wenden Sie sich an Ihren Systemadministrator oder Fachhändler.
En estas instrucciones de configuración se describen entornos de usuarios típicos. Los
mensajes en pantalla, pueden diferir según sea el nivel del hardware y del software. En
algunos casos, necesitará seguir otros procedimientos para la configuración.
Para obtener más información, puede consultar los man uales del ordenador o del sistema
operativo o ponerse en contacto con el administrador del sistema o con el distribuidor.
Queste istruzioni di configurazione per l’utente coprono gli ambienti operativi comuni. I
messaggi che appaiono sul video possono differire a seconda dell’hardware e del
software utilizzati. In alcuni casi potrebbe essere necessario variare le procedure di
configurazione.
Per ulteriori informazioni, fare riferimento ai manuali del computer o del sistema
operativo, o consultare il proprio amministratore di sistema o il concessionario.
1
9514. book Page i Wednesday, March 25, 1998 10:12 PM
DANGER
To av oid el ectr ic shoc k hazar d:
• The product is supplied with a grounded plug and power cord which should be used to
connect to the AC supply.
• The power cord should only be used with a properly wired and grounded power outlet.
• Any equipment to which this product is attached must also be connected to a properly
wired and grounded outlet.
• Do not remove the covers.
• The product does not incorpora te an AC power switch. To isolate the monitor from the
electrical supply, you must remove the plug from the power outlet. The power outlet
should be easily accessible
• Do not connect or disconnect this product during an electrical stor m.
• Always use the AC adapter supplied with the monitor.
Handing:
• Handle this product with care when moving it.
• The panel should not be operated in a horizontal position.
• The fluorescent lamp used in the Liquid Crystal Display assembly contains a small
quantity of mercur y (less than 50 milligrams ). For environmental reasons this product
should not be disposed of into landfill. It must be disposed of as required by local
ordinances or regulations.
• The Liquid Crystal Display assembly is made of glass and can break as a result of
rough handling or dropping. This may lead under some circumstances to a small
quantity of the liquid crystal material being exposed. Avoid contact with this material as
it is an irritant. Should this material come into contact with eyes, hands, etc., the area
should be washed with water for at least 15 minutes; medical care should be obtained if
any symptoms are present after washing.
i
9514.book Page 1 We dnesday, Marc h 25, 199 8 10:12 PM
Contents
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Workplace Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lifting the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Working Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Switching on the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjusting the Monitor Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Caring for your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Configuring your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Automatic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Auto Setup for the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Auto Setup for DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Auto Setup for Windows 3.1, Windows 95, or Windows NT . . . . . . . . . . . . . . 10
Auto Setup OS/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Quick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
User controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Front of screen controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
On-screen display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting Non Interlaced Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Further Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Supported screen addressability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Default Preset Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Compliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
1
9514.book Page 2 We dnesday, Marc h 25, 199 8 10:12 PM
Setup
Hardware Requirements
This Monitor requires a computer with a suitable on-board sub - system or Video Adapter card that can
support SX GA 1024 x 768 at 75 Hz.
Make sure the PC's video mode is set in the range of the supported screen addressability shown in the
table on page 21.
Workplace Preparation
This se ction gives advice
on what you should
consider before you set up your
monitor.
Lifti ng the Monitor
Positioning the Monitor
Choose a suitable place to position the monitor where it is not near
fluorescent desk lighting. Ensure that the furniture or equipment can support
the weight of the monitor. Allow at least 2 inches (50mm) ventilation space
around the monitor.
Height
The monitor should be positioned so that the top of the screen is slightly
below your eye level when you sit at your workstation.
Orientation
Choose a position that gives the least reflection from lights and windows,
usually at a right angle to any windows. The monitor should be positioned
directly in front of you so that you do not have to twist your body to use it. Tilt
the monitor to a comfortable viewing angle.
Do not su ppor t the mo nito r
within the screen area. The
Liquid Crystal Display is glass
and can be damaged by rough
handl ing or excessive pressure.
Hold the bottom of the screen with both hands in the positions shown.
2
9514.book Page 3 We dnesday, Marc h 25, 199 8 10:12 PM
Working Practices
Rest
Take regular breaks. Vary your posture, stand up and stretch occasionally as
prolonged use of computer workstations can be tiring.
This se ction gives advice
on how you can work
comfortably and reduce fatigue.
Back
You should sit back in your chair and use the backrest.
Hands
Use a light touch on the keyboard, keeping your hands and fingers relaxed.
Allow a space in front of the keyboard to rest your wrists when not typing.
Consider using a wristpad.
Eyesi g ht
Working with monitors, in common with any prolonged close work, can be
visually demanding. Look away from the screen periodically and have your
eyesight checked regularly .
Screen settings
Set the screen brightness and contrast to a comfortable level. You may have
to adjust this as the lighting changes during the day. Many application
programs let you select color combinations which can help you to view in
comfort
3
9514.book Page 4 We dnesday, Marc h 25, 199 8 10:12 PM
Connecting your Monitor
Be sure to read the
‘Safety Information’ at
the front of this User Guide
before carrying out this
procedure.
1. Turn off your PC and all attached devices.
2. With the monitor standing vertically, remove
the cable covers at the back:
• remove cable cover 1 by hooking your
finger at A and sliding the cover off
smoothly.
• remove cable cover 2 by pressing both
sides of the cover and pulling out.
3. Place the screen towards the edge of a flat
surface with the stand hanging slightly off the
edge. Connect the monitor cable and tighten the screws.
4.Next connect the AC adapter.
5. Thread the cables through the metal fitting - the AC adapter cable
through A and the monitor cable through B as shown below.
6. You can release the cables from each of the three notches by removing
the chips as shown above.
4
9514.book Page 5 We dnesday, Marc h 25, 199 8 10:12 PM
7. Turn the monitor upright and refit the covers .
8. Connect the monitor cable to the PC and
9. Connect the power cord to the AC adapter,
10. Connect the other end of the power cord to
Connecting the keyboard and mouse to the monitor
Slide on cover 2, fit cov er 1 either side of the
hinges and slide on.
tighten the screws.
placing the AC adapter in a safe place.
a correctly grounded AC power source.
You do not need to
connect the optional
keyboard / mouse cable if you
use the DPMS function for
standby mode.
To use the standby mode or extend the cable between the keyboard and
mouse. Connect optional keyboard / mouse (P/N: 82H8627) to the connector
at the rear of the monitor as shown, then connect the other end of the
keyboard and mouse connectors to the PC.
5
9514.book Page 6 We dnesday, Marc h 25, 199 8 10:12 PM
Switching on the Monitor
Switch on the power source and PC. To turn on the monitor, push and
release the power switch. T o switch it off, push and release the power switch
again.
Adjus ti ng the Mo ni to r Positio n
Viewing Angle
You can tilt the screen backward or rotate the monitor to the left or right, as
shown below.
Caring for your Monitor
Be sure to turn off the power before you perform any maintenance on the
monitor. Clean your monitor as follows:
• Gently wipe the device covers and the screen with a soft cloth.
• Do not use chemicals such as thinner or benzene. They may damage the
surface coating.
6
9514.book Page 7 We dnesday, Marc h 25, 199 8 10:12 PM
Configuring your Monitor
Automatic Setup
The Set up Uti li ty includ ed
on the setup option
diskettes are for di splayi ng
color-bar patterns. They do not
repl ace or modify the display
driver.
The automatic setup
instructions require the
monitor to be warmed up for 15
minutes. This is not required for
normal operation.
When you first use your monitor you must perform
Automatic (auto) Setup
.
This procedure sets up your monitor to process the video signals from your
computer without image discoloration or flicker . After you perf orm auto setup,
the settings are stored and used each time you turn on the monitor.
7
9514.book Page 8 We dnesday, Marc h 25, 199 8 10:12 PM
Auto Setup for the PC
Check the operating system installed on your PC and follow the instructions
from the table below.
Before carrying out this
section it is very important
that The Monitor Information
Diskette for Windows 95 and
Windo ws 9 8 has be en ru n. (S e e
page 10).
If your PC does not run
with the setup option
diskettes shipped with the
monitor, refer to Quick Setup
on page 12.
Operating System
DOS
Windows 3.1
Windows 95
Windows NT
Operating System/2 (OS/2)
First follow auto
setup on ....
page 9
page 9 page 10
page 9 page 10
page 9 page 10
page 9 page 11
Then follow auto
set-up on ....
Before you begin the auto setup for your PC :
1. Make a backup copy of the setup option diskettes supplied with the
monitor.
2. Make sure the PC's video mode is set in the range in the table of
Supported screen addressab ili ty
on page 21.
3. Perform the auto setup for each screen mode you use.
8
9514.book Page 9 We dnesday, Marc h 25, 199 8 10:12 PM
Auto Setup for DOS
1. Turn on the monitor first; then the PC.
If the message UNSUPPORTED VIDEO is displayed, or if nothing is displayed
If the monitor is in standby
mode (STANDBY ON), it
may automatically turn off while
you are waiting for it to warm up.
check:
2. Wait approximately 15 minutes, until the monitor warms up.
• that the video interface cable is connected properly.
• the correct video adapter card is installed.
• the correct supported displ ay mode is selected for your PC.
If you are us ing PC- DOS/V ,
change to U.S. mode by
typing ‘CHEV US’ and pre ss ing
ENTER at the command
prompt.
If the screen flickers,
repeat the setup s everal
times until the flicker is
minimised,
3. Insert the diskette labelled ‘ Setup Option Diskette (for DOS / Windows /
Windows NT)’ into the diskette drive.
4. Display the command prompt screen of the DOS full-screen display:
• If Windows is installed, open the DOS prompt from the Program
Manager to display the DOS full-screen.
• If OS/2 is installed, open the DOS full-screen display from the
command prompt of OS/2.
• If only DOS is installed, the command prompt is displayed when the
system is started.
5. At the command prompt, type
6. Type
‘TESTPA T D’
and press ENTER. The color-bar pattern appears.
and press ENT E R.
‘A:’
7. Push the setup switch at the bottom of the monitor. The setup menu
appears.
8. Push one of the brightness control buttons to select AUTO SETUP.
9. Push one of the contrast control buttons (+ moves the highlighter
up; - moves the highlighter down). The AUTO SETUP line changes to
start, and auto setup starts.
10. W a it until the PRESS [ENTER] KEY message is displayed.
11. Press ENTER to continue the auto setup procedure.
12. The AUTO SETUP line changes to COMPLETED when auto setup is
complete.
13. Push the setup switch at the bottom of the monitor. The setup menu
disappears.
14. Type
Now continue the setup for your operating system:
at the command prompt to return to Windows.
‘Exit’
9
9514.book Page 10 Wednesday, March 25, 1998 10:12 PM
A u to Setup for Windows 3.1, Windows 95, or Windows NT
If the monitor is in standby
mode (STANDBY ON), it
may automatically turn off while
you are waiting for it to warm up.
Continued from
Auto Setup for DOS
on page 9
15 Drag the icon bar and tool bar, if they are displayed, to the bottom of the
screen
16. Insert the diskette labelled ‘ Setup Option Diskette (for DOS / Windows /
Windows NT)’ into the diskette drive.
17. Check the operating system installed on your PC and follow the
instructions from the table below
.
Operating
system
Step 1 Step 2 Step 3 Step 4
open
Windows 3.1
Program
click on
File
click on
run
Manager
Windows NT
3.5
open
Program
Manager
click on
File
click on
run
Type
‘A:\TESTPAT’
The size and diversity of
the color pattern varies
with the screen resolution.
If the screen flickers,
repeat the setup s everal
times until the flicker is
minimised,
Windows 95
Windows NT
click on
click on
Start
Start
cli ck o n
cli ck o n
Run
Run
4.0
18. The color-bar pattern appears and auto setup starts.
19. Position the mouse pointer at the bottom center of the screen. This
allows auto setup to run properly.
20. The AUTO SETUP line changes to COMPLETED when auto setup is
completed.
If “A UT O SETUP COMPLETED” is not disp la y ed, or the “ A UT O SETUP FAILED”
message appears, repeat the auto setup procedure several times.
21. Press ALT+F4 to exit auto setup.
You have completed the monitor setup.
10
9514.book Page 11 Wednesday, March 25, 1998 10:12 PM
Auto Setup OS/2
If the monitor is in standby
mode (STANDBY ON), it
may automatically turn off while
you are waiting for it to warm up.
The size and diversity of
the color pattern varies
with the screen resolution.
Continued from
Auto Setup for DOS
on page 9
11 If the WarpCenter Toolbar is perm anently on, click the right mouse
button on the WarpCenter Toolbar, click on
and
‘Show only when mouse in center position’
‘Properties’, ‘Display Tab’
.
12. Insert the diskette labelled ‘ Setup Option Diskette (for OS/2)’ into the
diskette drive.
13. Open the OS/2 full-screen window or an OS/2 window.
14. At the command prompt type A: and press ENTER.
15. Type TESTPATS and press ENT ER.
16. After approximately 1 minute, the color-bar pattern appears.
17. Move the mouse pointer (and the icon bar and tool bar if they are
displayed) to the bottom center of the screen to allow setup to run
properly.
18. The AUTO SETUP line changes to COMPLETED when auto setup is
completed after 10 to 20 seconds.
If “A UT O SETUP COMPLETED” is not disp la y ed, or the “ A UT O SETUP FAILED”
message appears, repeat the auto setup procedure several times.
19. Press ALT+F4 to exit auto setup.
If the screen flickers,
repeat the setup s everal
times until the flicker is
minimised.
You have completed the monitor setup.
11
9514.book Page 12 Wednesday, March 25, 1998 10:12 PM
Quick Setup
You can perform a quick setup without running the Auto-Setup application
1. Turn on the monitor and the System Unit and wait for about 15 minutes
Check that the screen
resolution and t he
frequencies are within the
Supported screen
addressability on page 21. If
not, change the settings on the
computer to set them within the
range.
until the machine warms up.
2. Start the operating system on the System Unit and display a full-screen
image.
3. Push the setup switch on the front of the monitor. The setup main menu
appears.
You need a full screen
image to pe rf o rm pr o pe r
auto setup. You also need a
clear contra st between the
brightest part of the screen and
the darkest for correct
adjustment. O therwise, the
screen may flicker .
If the “Save Parameters?”
message is not displayed
or th e au to s etup v alue “S TART”
does not change, push the
contrast control button to exit
auto setup and go back t o step
4. Display another full-screen
image and redo auto se tup.
If you are using a
workstation, the screen
appears greenish be cause the
black level is shifted due to the
diffe ren ce o f t he vo lt a ge level of
the video sig nals. If this
happens, adjust OFFSET G in
the Specialist Controls on
page 16.
4. Press one of the brightness control buttons to select AUTO SETUP.
5. Press one of the contrast control buttons. After about 10 seconds,
the message “Save parameters?” is displayed.
6. To save the settings for the monitor , push a contrast control button.
To discard the settings (because some problem such as a screen flicker
occurs), push a brightness control button.
7. Press the setup switch on the back of the monitor to turn off the setup
main menu.
12
9514.book Page 13 Wednesday, March 25, 1998 10:12 PM
Front of screen controls
The front of screen user controls allow the user to turn the monitor on and off,
adjust the brightness and contrast of the monitor to meet the users
preferences, and also to gain access to intermediate and advanced OnScreen Display Controls.
User controls
Icon Control Description
P ower Switch Switches the monitor on and off
P ower Indicator Green Light when monitor is
powered on.
Standby indicator Green Light when monitor is in
standby mode.
Brightness Control Adjusts background brightness.
Contrast Control Adjust contrast between
foreground and background.
Setup Switch Displays the setup menu.
13
9514.book Page 14 Wednesday, March 25, 1998 10:12 PM
On-screen display (OSD) controls
To display the OSD, press the setup switch on the front of the monitor.
Menu
Brightness
Contrast
There are eight menus within the OSD. T hese menus contain the f ol lo wing functions which can be divided
into four levels of adjustment : basic, intermediate, advanced and specialised. The final menu
“Information” gives the user information regarding their monitor.
+-
Basic Controls
Function Location
AUT O
SETUP
Menu 1 of 6
Effect of
control
OFF / ON ‘AUTO SETUP - OFF’ is displayed. Start auto
setup. ‘START’-’COMPLETED’ are d is played in
sequence until auto setup is complete.
Description
STANDBY
Menu 1 of 6
OFF, 5 to 60
MINS, DPMS
Set the number of minutes the monitor is out of use
before automatically entering the power-saving
mode. Specify OFF if you do not use this function.
14
9514.book Page 15 Wednesday, March 25, 1998 10:12 PM
Intermediate Controls
Function Location
CLOCK
Menu 2 of 6 +........MHz......- Adjust this parameter to suppress the display of
Menu 2 of 6 0..................23 When there are visual noises on the edges of
PHASE
H-POSI
V-POSI
SYSTEM
Menu 4 of 6 Moves image left or right.
Menu 4 of 6 Moves image up or down.
Menu 5 of 6 YES / NO Use this parameter to restore all the values to the
RESET
Advanced Controls
Function Location
Effect of
control
Effect of
control
Description
vertical stripes.
characters and graphics, adjust this parameter to
suppress the noise.
orginal settings when the monitor was shipped.
Description
H-SIZE
V-SIZE
EXPAND-
SION
Menu 4 of 6 Adjusts image width.
Menu 4 of 6 Adjusts image height.
To display a screen with resolution less than
1024×768 (the optimum resolution of the monitor),
Menu 1 of 6 ON / OFF /
USER
select the optimum size you want by specifying one
of the following :
Displays a full screen. This is the normal
ON:
selection.
Displays the screen specified by your PC.
OFF:
USER:
Enables you to set the screen size by
specifying H-size and V-size. This setting can be
set and saved for each screen resolution.
15
9514.book Page 16 Wednesday, March 25, 1998 10:12 PM
Specialist Controls
Function Location
RED
GREEN
BLUE
Menu 3 of 6 0................255 Adjust s the red hue level of the screen.
Menu 3 of 6 0................255 Adjusts the green hue level of the screen.
Menu 3 of 6 0................255 Adjusts the blue hue level of the screen.
Inf orm ation
Function Location Description
H-FREQUENCY
Effect of
control
Description
Menu 6 of 6 The frequency of the video signal (horizontal sync
signal) from your PC (KHz).
V-FREQUENCY
SYNC POLARITY
RESOLUTION
SOFTWARE VERSION
Menu 6 of 6 The frequency of the video signal (vertical sync signal,
or refresh rate) from your PC (Hz).
Menu 6 of 6 The polarity of the video signal from your PC.
H stands for the horizontal sync signal, and V stands for
the vertical sync signal.
Menu 6 of 6 The resolution of the video signal from your PC.
Menu 6 of 6 The version number of the control program installed in
the monitor.
16
9514.book Page 17 Wednesday, March 25, 1998 10:12 PM
Troubleshooting
If you suspect something is not working correctly, you should :
1. Tur n on the computer and monitor.
2. Set the brightness control to the proper position.
3. Ensure that all cables are securely connected.
The LCD contains over
2,300,000 thin-film
transistors (TFTs). A small
number of missing, discolored,
or lighted dots may be present
on the scr een, which is an
intrinsic characteristic of the TFT
LCD technolo gy and is not an
LCD defect.
4. Disable standby mode if it is enabled. Push the setup switch on the
back of the monitor to determine whether standby mode is enabled.
5. Disable the computer's screen saver program if it is enabled.
6. Run the auto setup procedure described in
Configuring your Monitor
on page 7
7. Adjust the CLOCK parameter in the
Intermediat e Controls
on page 15
to suppress the display of vertical stripes.
8. To restore all the auto setup settings to the original values in effect when
the monitor was shipped, press each minus button of the brightness and
the contrast control simultaneously and turn on the monitor. Both LED
indicators turn on and off, and all settings are restored.
9. Set the screen mode to the
Supported screen addressability
in the
table on page 21.
10. Perform AUTO SETUP for each display mode (each screen resolution).
11. Disable Interlaced Mode. (The monitor does not support interlaced
mode).
17
9514.book Page 18 Wednesday, March 25, 1998 10:12 PM
Setting Non Interlaced Mode
The monitor does not suppor t int erla ce mode. If the video settings of your
IBM PC specify interlace mode, change them with the following steps:
1. Turn on the monitor.
2. Tur n on your PC.
3. Press F1 while the message ‘Press F1 for configuration/setup’ is being
displayed.
4. Select Device and I/O in the Device Configuration Utility.
5. Select Setup Video.
6. Set the display type to Customize and the refresh rate to 60Hz or 75Hz.
7. Press ESC three times.
8. Select Save and Exit.
9. Non Interlaced mode has been set.
18
9514.book Page 19 Wednesday, March 25, 1998 10:12 PM
Further Help
If you are unable to correct the problem yourself, you may seek further help
as follows:
Call the IBM HELPCENTER.
In the US call 1-800-772-2227
In Canada call 1-800-565-3344
In other countries contact your dealer, retailer, or other IBM authorized
Servicer.
Before calling, please have available as much of the following information as
possible:
If possible, stay by your
computer. Your Technical
Support Representative may
wish to go through the problem
with you during the ca ll.
1. Model and serial number from the label on the front of your monitor.
2. P urchase re c eipt.
3. Description of problem.
4. Computer type and model.
5. System configuration (hardware fitted, etc.).
6. System BIOS version number.
7. Operating System and version number.
8. Display driver version number.
19
9514.book Page 20 Wednesday, March 25, 1998 10:12 PM
Specifications
RGB input connector BNC jack
Some ty pes of compos ite
sync signal s are not
supported.
Video input impedance (RGB) 75 ohms
Video amplification 0.7V
Input voltage (AC Adapter) 100 to 127 V rms 50/60 Hz
p-p
, 1.0V
p-p
(composite)
200 to 240 V rms 50/60 Hz
Power dissipation (max) 55 W
Power dissipation (in power-off
8 W
mode)
Sync Signal Type
The following Sync signal types are supported :
• Separate sync (TTL level).
• Sync on green *.
• Composite sync (TTL level ).
* Horizontal sync pulses must not be suppressed during the vertical sync
period.
20
9514.book Page 21 Wednesday, March 25, 1998 10:12 PM
Supported screen addressability
Type
Screen resolution
(D × L)
VGA 640 × 350 (NI)
640 × 450 (NI)
640 × 480 (NI)
720 × 350 (NI)
720 × 400 (NI)
Hsync
(KHz)
29 – 38
24 – 38
29 – 38
29 – 38
29 – 38
Vsync
(Hz)
69 – 88
55 – 88
59 – 75
69 – 88
55 – 88
SVGA 800 × 600 (NI) 34 – 50 55 – 76
XGA 1024 × 768 (NI) 48 – 62 59 – 76
Notes:
1. Set the vertical scan range of your computer to the values in this table.
2. NI: Noninterlaced
The monitor suppor t s the screen resolutions shown in the table on page 41.
The following are examples of some common video adapters :
IBM PCs, such as PC750, PC720, PC350, PC330, and Aptiva series,
equipped with the following video chips or Matrox Millennium video cards:
• Trident 9680XGI
• S3 Vision 864
• S3 Trio 64V+
• Cirrus GD5446
• Cirrus GD5436
•ATI 3D RAGE
• MGA Millennium (Mat rox Graphics Inc.)
• MGA Mystique (Matrox Graphics Inc.)
• ATI 3D EXPRESSION
• NEC PC 9800 series computers that support resolutions more than
640 × 400 and horizontal scan range of 31.5 or more.
21
9514.book Page 22 Wednesday, March 25, 1998 10:12 PM
Default Preset Timing
The monitor retains the following timing parameters for ‘Clock,’ ‘Hsync,’
‘Vsync,’ and Displayable Dots’ as default values. The monitor automatically
selects the corresponding values to the video signal from your PC.
Screen
Timing
Displayable
Resolution
(Horiz. × Vert.)
Clock
(MHz)
Hsync
(KHz)
Vsync
(Hz)
Dots
(Horiz. ×
Ve rt.)
640 × 400 25.18 31.47 70.09 800 × 449
640 × 480 25.18 31.47 59.94 800 × 525
720 × 400 28.32 31.47 70.09 900 × 449
640 × 480 31.50 37.86 72.81 832 × 520
640 × 480 31.50 37.50 75.00 840 × 500
800 × 600 36.00 35.16 56.25 1024 × 625
800 × 600 40.00 37.88 60.32 1056 × 628
800 × 600 50.00 48.08 72.19 1040 × 666
800 × 600 49.50 46.88 75.00 1056 × 625
Note:
be displayed. Refer to the table on page 21 for the supported frequencies.
The parameters that you set through AUTO SETUP on the main menu or the
manual-adjust menu are saved in the monitor memory. Up to 25 settings can
be stored.
1024 × 768 65.00 48.36 60.00 1344 × 806
1024 × 768 75.00 56.48 70.07 1328 × 806
1024 × 768 78.75 60.02 75.03 1312 × 800
1024 × 768 80.00 58.14 72.00 1376 × 808
The Hsync and Vsync frequencies in this table are not the only ones to
22
9514.book Page 24 Wednesday, March 25, 1998 10:12 PM
Compliances
Federal
Communications
Commission (FCC)
Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
resedential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in
order to meet FCC emission limits. IBM is not responsible for any radio or
television interference caused by using other than recommended cables and
connectors or by unauthorized changes or modifications to this equipment.
Unauthorized changes or modi fications could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Power Cords
For your safety, IBM provides a power cord with a grounded attachment plug
to use with this IBM product. To avoid electrical shock, always use the power
cord and plug with a properly grounded power outlet.
IBM power cords used in the United States and Canada are listed by the
Underwriters Laboratories (UL) and cer t ified by the Canadian Standards
Association (CSA).
For units intended to be operated at 115 volts: Use a UL listed and CSA
cert ified cord set consisting of a minimum 18 AWG, type SVT or SJT, three
conductor cord, a maximum of 4.5 metres (15 feet) in length and a parallel
blade, grounding type attachment plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U . S. use): Use a UL listed and
CSA certified cord set consisting of a
minimum 18 AWG, type SVT or SJT, three conductor cord, a maximum of 4.5
metres (15 feet) in length and a tandem blade, grounding type attachment
plug rated 15 amperes 250 volts.
24
9514.book Page 25 Wednesday, March 25, 1998 10:12 PM
For units intended to be operated at 230 volts (outside the U.S .): Use a cord
set with a grounding type attachment plug rated 13 amperes (minimum), 250
volts. The cord set should be marked <HAR> and have the appropriate safety
approvals for the country in which the equipment will be installed.
As an ENERGY STAR Partner, IBM Corpo ration has determ in ed that this
product meets the ENERGY STAR guidelines for energy efficiency.
MPRII
Hinweise
This monitor complies with TCO’92 guidelines.
This product complies with Swedish National Council for Metrology (MPR)
standards issued in December 1990 (MPRII) for very low frequency (VLF)
and extremely low frequency (ELF).
Gemäß der Amtsblätter des BMPT Nm. 61/1991 und 6/1992 wird der
Betreiber darauf aufmerksam gemächt, daß die von ihm mit diesem Gerät
zusammengest ellte Anlage auch den te chnisc hen Bestimmun gen dieser
Amtsblätter genügen muß.
Aus ergonomischen Gründen wird empfohlen, die Grundfarbe Blau nicht auf
dunklem Untergrund zu verwenden (schlechte Erkennbarkeit,
Augenbelastung bei zu geringem Zeichenkontrast).
Aus ergonomischen Gründen sollten nur Darstellungen auf dunklem
Hintergrund bei Vertikalfrequenzen ab 60 Hz (ohne Zeilensprung) benutzt
werden.
Die Konvergenz des Bildes kann sich auf Grund des Magnetfeldes am Ort
der Aufstellung aus der korrekten Grundeinstellung verändern. Zur Korrektur
empfiehlt es sich deshalb, die Regler an der Frontseite für H STAT und V
STAT so einzustellen, daß die getrennt sichtbaren Farblinien für Rot. Grün
und Blau bei z.B. der Darstellung eines Buchstabens zur Deckung
(Konve rgenz) gelangen. Siehe hierzu auch die Erklärungen zu H STAT und V
STAT.
25
9514.book Page 26 Wednesday, March 25, 1998 10:12 PM
Industry Canada
Compliance
Statement
European Union (EU)
Statement
This Class A digital apparatus meets the requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
This product has been tested and found to comply with the limits for Class A
Information Technology Equipment according to CISPR 22 / European
Standard EN 55022. The limits for Class A equipment were derived for
commercial and industrial environments to provide reasonable protection
against interference with licensed communication devices.
Warning: This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
Properly shielded and grounded cables and connectors must be used in
order to reduce the potential for causing interference to radio and TV
communications and to other electrical or electronic equipment. Such cables
and connectors are available from IBM authorised dealers.
In accordance with EN 50082-1 1992, Performance Criterion A:, it should be
noted that in the presence of certain electrom agnet ic fields, some screen
jitter may be observed.
26
9514.book Page 27 Wednesday, March 25, 1998 10:12 PM
USA., Canada and Puerto Rico Statement of Limited Warranty
The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines
you originally purchase for your use and not for resale, from IBM or an IBM authorized reseller.
The term “Machine” means an IBM machine, its features, conversions, upgrades, elements, or
accessories, or any combination of them. Machines are subject to these terms only if purchased
in the United States or Puerto Rico, or Canada and located in the country of purchase. If you
have any questions, contact IBM or your reseller.
Warranty
Machine:
Warranty Period *:
* Elements and accessories are warranted for three months.
Contact your place of purchase for warranty service information.
IBM 9514 LCD Color Monitors
3 Years
Production Status
Each Machine is manufactured from new parts, or new and serviceable used parts (which
perform like new parts). In some cases, the Machine may not be new and may have been
previously installed. Regardless of the Machine’s production status, IBM’s warranty terms apply.
The IBM Warranty
IBM warrants that each Machine 1) is free from defects in materials and workmanship and 2)
conforms to IBM’s Official Published Specifications. IBM calculates the expiration of the warranty
period from the Machine’s Date of Installation. The date on your receipt is the Date of
Installation, unless IBM or your reseller informs you otherwise.
During the warranty period, IBM or your reseller will provide warranty service under the type of
service designated for the Machine and will manage and install engineering changes that apply
to the Machine. IBM or your reseller will specify the type of service.
For a feature, conversion or upgrade, IBM or your reseller may require that the Machine on which
it is installed be 1) the designated, serial-numbered Machine and 2) at an engineering-change
level compatible with the feature, conversion, or upgrade. Some of these transactions (called “NetPriced” transactions) may include additional parts and associated replacement parts that are
provided on an exchange basis. All removed parts become the property of IBM and must be returned
to IBM.
Replacement parts assume the remaining warranty of the parts they replace.
If a Machine does not function as warranted during the warranty period, IBM or your reseller will
repair or replace it (with a Machine that is at least functionally equivalent) without charge. If IBM
or your reseller is unable to do so, you may return it to your place of purchase and your money
will be refunded.
If you transfer a Machine to another user, warranty service is available to that user for the
remainder of the warranty period. You should give your proof of purchase and this Statement to
that user.
Warranty Service
To obtain warranty service for the Machine, contact your reseller or call IBM. In the United
States, call IBM at 1-800-772-2227. In Canada call IBM at 1-800-565-3344. You may be
required to present proof of purchase.
27
9514.book Page 28 Wednesday, March 25, 1998 10:12 PM
The service may be 1) a “Repair” service at your location (called “On-Site”) or at one of IBM’s or
a reseller’s service locations (called “Carry-in”) or 2) an “Exchange” service, either On-site or
Carry-i n. If in doubt, contact your point of sale.
When a type of service involves the exchange of a Machine or part, the item IBM or your reseller
repla c es becomes its property and the re placement becomes yours. The replacement may not
be new, but will be in good working order, and at least functionally equivalent to the item
replaced.
It is your responsibility to:
1. obtain authorization from t he owner (for example, your lessor) to have IBM or your reseller
service a Machine that you do not own;
2. where applicable, before service is provided a. follow the problem determination, problem analysis and service request procedures that
IBM or your reseller provide.
b. secure all programs, data and funds contained in a Machine.
c. inform IBM or your reseller of changes in a Machine’s location, and
d. for a Machine with exchange service, remove all features, parts, options, alterations, and
attachments not under warranty service. Also the Machine must be free of any legal
obligations or restrictions that prevent its exchange; and
3. be responsible for loss of, or damage to, a Machine in transit when you are responsible for
the transportation charges.
Extent of Warranty
IBM does not warrant uninter rupted o r error -free operation of a Machine.
Misuse, accident, modification, unsuitable physical or operating environment, improper
maintenance by you, or failure caused by a product for which IBM is not responsible may void the
warranties.
THESE WARRANTIES REPLACE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO , THE IMPLIED WA RRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. HOWEVER, SOME LAWS DO NOT ALLOW
THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL
EXPRESS AND IMPLIED WARRANTIES ARE LIMITED IN DURATION T O THE W A RRANTY
PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.
In Can ad a, wa rranties in cl ude both war ran t ie s an d co nd itions.
Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.
For European warranty terms and conditions refer to enclosed IBM warranty
statement Part Number 72H9623.
Référez-vous à la garantie IBM N°
de garantie européennes.
Die europäischen Garantiebedingungen finden Sie in der beigefügten IBMGewährleistungserklärung, Teilenummer 72H9623.
Los términos y condicio nes de las garantías en Europa se recogen en la
declaración de garantía adjunta del número de pieza IBM 72H9623.
28
de référence 72H9623 pour les conditions
9514.book Page 29 Wednesday, March 25, 1998 10:12 PM
Per le condizioni e i termini di garanzia relativi ai paesi europei, consultare
l'apposita dichiarazione IBM (numero di matricola 72H9623).
29
Loading...