supplement includes updated information for the
information instead of the corresponding information in the
Single FDD support
Although the
computer, your computer can support only one FDD at a time. The FDD in the bay always takes
precedence over the external FDD. For example, in suspend mode, if you install an FDD in the bay
and attach an FDD externally, the computer recognizes the FDD in the bay after resuming.
This information also applies when you are using the docking station.
Software Selections CD
Although your
Guide
describes a ThinkPad Customization Center icon, your computer has a Software Selections
CD rather than the ThinkPad Customization Center CD, and there is no ThinkPad Customization
Center icon on the desktop. The Software Selections CD includes the preloaded software and
ThinkPad device drivers for Windows 98, Windows 95, and Windows NT. You can customize your
computer with this CD. To use the Software Selections CD, insert it into the CD-ROM or DVD
drive. The main menu appears. Follow the instructions on the screen. For more information, click
Help in the menu.
User's Reference
User's Reference
770X User's Reference
states that several FDDs can be supported by the ThinkPad
describes the ThinkPad Customization Center CD, and the
for the ThinkPad 770Z computer
User's Reference
User's Reference
(part number 27L3407). Use this
.
. This
Setup
Copyright IBM Corp. 1998
Page 2
Updated Diskette Factory
Because of the new function in the Software Selections CD, the Diskette Factory no longer supports
all device drivers. You can see the supported software listed in the Diskette Factory main window.
New diskette name
The diskette name in the description of the Personalization Editor in the
changed from
The Recovery CD
The Recovery CD is a startable CD-ROM and is not shipped with a boot diskette. The description
about using the Recovery CD with the boot diskette in the
Asset ID icon
The “Config” menu of Easy-Setup includes an Asset ID icon (), for a new radio-frequency ID
option that is supported in specified models. More details are provided in the option's user's guide.
Docking your computer to a docking station
– If you use a SelectaDock I or SelectaDock II docking station, connect the power cord to a
docking station and the AC Adapter to a SelectaBase 770 port replicator.
– If you use a SelectaDock III docking station, connect the power cord to the docking station.
Notice for using the external monitor
If you use the Both LCD and CRT Display function, the external monitor must support the same
resolution as that of your ThinkPad LCD.
Utility Diskette for DOS
to
Personalization Data Update Diskette
User's Reference
User's Reference
.
no longer applies.
has
If you are using an external monitor that does not support the maximum resolution of the ThinkPad
LCD (1024 X 768 for the XGA model, or 800 X 600 for the SVGA model), do not use Both LCDand CRT Display.
Notice for using the Compact Smart Card
Some Compact Smart Cards are too thick to be inserted into the upper PC Card slot of your
computer. Insert the card into the lower slot.
Solving computer problems
Docking station problems
The following troubleshooting might apply to users who are using the docking station—SelectaDock
I, II, III, or the Port Replicator with Advanced EtherJet Feature—under the Windows 95
environment.
Page 3
Note: In the following steps, src_cd is the drive letter of the DVD or CD-ROM drive and cc is the
respective country code.
The following table shows the country code that you will need in the instructions:
and press Enter.
You are prompted if it is okay to overwrite the file.
4. Type Y and press Enter.
Cards in the docking station
don't work after the computer
resumes from the power
management mode.
The system reboots when you
insert the PC Card into the
docking station.
1. Start Windows 95.
2. Insert the Software Selections CD into the CD-ROM drive.
3. Click Start and move the cursor to Program; then click on
Windows Explorer.
4. Click the driver letter of the DVD or CD-ROM drive.
5. Double-click PCMCIA.REG under DATA\WIN95\cc\W95UPD
6. Click OK.
States
US
Page 4
Audio problem
ProblemAction
(
Windows 95 or Windows 98
users:
) Wave or MIDI sound does
not play correctly.
Make sure that the built-in audio device is configured correctly:
1. Click Start.
2. Move the cursor to Program; then click Control Panel.
3. Double-click System.
4. Click the Device Manager tab.
5. Click the + mark by Sound, video and game controller.
6. Make sure all the following devices are enabled and configured
correctly:
Battery pack problem
ProblemAction
The battery pack cannot be
charged.
The battery pack might not be able to charged when it is hot. In that
case, remove it from the computer and leave it at room temperature for
a while. After it cools down, reinstall it and recharge it. If it cannot be
charged, have it serviced.
Crystal PnP audio System CODEC
Crystal PnP audio System Control Registers
Crystal SoundFusion PCI Audio Accelerator
Crystal SoundFusion Virtual MPU-401
Protection notice requirement
This device is protected by U.S. patent numbers 4631603, 4577216, 4819098, 4907093, and other
intellectual property rights. The use of Macrovision's copy protection technology in the device must
be authorized by Macrovision and is intended for home and other limited pay-per-view use only,
unless otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is
prohibited.
Sound synchronization restriction
For some MPEG1 or MPEG2 files, the sound might not synchronize with the movie.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.