Before using this information and the product it supports, be sure to read the general information under “How To Use This Parts
Catalog” on page iv.
Second Edition (December 1996)
IBM has prepared this maintenance manual for the use of customer service representatives in the installation, maintenance, and
repair of the specific machines indicated. IBM makes no representations that it is suitable for any other purpose.
References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all
countries in which IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only
IBM’s product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any
of IBM’s intellectual property rights may be used instead of the IBM product, program, or service. Evaluation and verification of
operation in conjunction with other products, except those expressly designated by IBM, are the user’s responsibility.
IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document
does not give you any license to these patents. You can send license inquiries, in writing, to the IBM Director of Licensing, IBM
Corporation, 500 Columbus Avenue, Thornwood, NY 10594 USA.
Copyright International Business Machines Corporation 1996. All rights reserved.
Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is subject to
restrictions set forth in GSA ADP Schedule Contract with IBM Corp.
Contents
How To Use This Parts Catalog......................................... iv
Assembly 24: Locks, Tools, and Diskettes................................. 60
Part Number Index................................................ 61
Copyright IBM Corp. 1996 iii
How To Use This Parts Catalog
This parts catalog contains reference drawings and a corresponding index for all field replaceable parts.
The index provides the part number, the quantity required (units), and a description of the part.
You may locate specific assemblies by referring to the Table of Contents, the “Assemblies Listing” on
page v, or the “Part Number Index” on page 61.
Listed below is additional information about the parts assembly index.
SIMILAR ASSEMBLIES: If two assemblies contain
a majority of identical parts, they are broken down
on the same list. Common parts are shown by
one index number. Parts specific to one or the
other of the assemblies are listed separately and
identified by description.
AR: (As Required) in the Units column indicates
that the quantity is not the same for all machines.
NP: (Non-Procurable) in the Units column indicates that the part is non-procurable and that the
individual parts or the next higher assembly
should be ordered.
NR: (Not Recommended) in the Units column indicates that the part is procurable, but not recommended for field replacement, and that the next
higher assembly should be ordered.
R: (Restricted) in the Units column indicates the
part has a restricted availability.
Assemblyn: Example Assembly
NS: (Not Shown)
INDENTURE: The indenture is marked by a
series of dots located before the parts description.
The indenture indicates the relationship of a part
to the next higher assembly. For example:
IndentureRelationship of Parts
(No dot)MAIN ASSEMBLY
(One dot) Detail parts of a main assembly
(One dot) Subassembly of the main
assembly
(Two dots) Detail part of a one-dot
subassembly
(Two dots) Subassembly of a one-dot
subassembly
(Three dots)Detail part of a two-dot
subassembly
Asm–Part
IndexNumberUnitsDescription
n
–25126671Cover Assembly, Rear, Red
–25126681Cover Assembly, Rear, Yellow
For Next Higher Assembly, See Assembly 1–2
–153736371Seal, Top
–253564292Clip, Retaining
–325130133Liner, Cover
–453737271Seal, Left Side
–55136682Catch, Cover
–6816934Screw, Mach, Bind Hd 6–32, 0.375 Long
–71847630RFinger Stock Assembly
–81847602NR Channel, Finger Stock
–91847604NR Finger Stock, 2.00 Long
–105373639ARSeal, Bottom
ivStore Systems Parts Catalog
Assemblies Listing
Base Asm for Displays, Flat Panel and Sure Point Touch ......................... 24
–593F1836RLogo Plate
–693F18471Door Asm, Front Panel Tall
Model 551 only
–693F18871Door Asm, Front Panel Short
Models 212, 331, 431
–793F18551Lock Barrel and Clip
Model 551 only
–893F18261Lock Parts Kit
Model 551 only
–993F18661Panel, Blank
Model 551 only
–1093F18441Panel Asm, Operator
Model 551 only
–1093F18451Panel Asm, Operator
Models 331, 431
–1093F18461Panel Asm, Operator
Model 212 only
–1193F18631Interlock Asm
(without Battery)
–11A93F11351Battery Asm, Standard Duration
Models 331, 431
System Unit Assemblies3
Assembly 1: (continued)
4Store Systems Parts Catalog
Asm–Part
IndexNumberUnitsDescription
1–1293F18421Cover Asm, Right Side
Model 551 only
–1293F18521Cover Asm, Right Side
Models 212, 331, 431
–1393F18411Cover Asm, Left Side
Model 551 only
–1393F18511Cover Asm, Left Side
Models 212, 331, 431
–1493F19021Button
–15NPTunnel Asm
–1693F18231Panel Asm, Rear Connector
Model 212 only
–1693F17931Panel Asm, Rear Connector
Model 331 only
–1693F18221Panel Asm, Rear Connector
Model 431 only
–1693F18211Panel Asm, Rear Connector
Model 551 only
–1761X87945Screw, M3.5
–1893F07381Screw, M3.5
System Unit Assemblies5
Assembly 1: (continued)
25
32
33
34
31
29
26
28
27
30
36
35
DETAIL ADETAIL B
6Store Systems Parts Catalog
Asm–Part
IndexNumberUnitsDescription
1–1993F18711Power Supply Asm DB, Low Voltage
–1993F18721Power Supply Asm DB, High Voltage
–19A93F17851Battery Asm, Extended Duration
–19B60G13171 Fuse Carrier
–19C60G13181 Fuse
–2093F18531Diskette Drive Asm, 1.44 Meg, Model 551 only
–2093F18951Diskette Drive Asm, 2.88 Meg, Model 551 only
–20A93F0658ARStud, M3
–2193F18311Cable, Diskette Long
–2293F18481Clip
–22A1621176ARScrew, Pan HD, M3 X 4
–2393F18341Fan, 80 mm, Model 551 only
–2393F18351Fan, 60 mm, Models 212, 331, 431
–2493F18651Plenum, Fan, 80 mm, Model 551
–2493F18791Plenum, Fan, 60 mm, Models 212, 331, 431
–2593F18251Card Cage Asm, Model 551 only
–2593F18911Card Cage Asm, Models 212, 331, 431
–2693F18101System Board Asm, Model 551 (PRE-CR)
–2693F18021System Board Asm, Model 431 (PRE-CR)
–2693F18041System Board Asm, Model 331 (PRE-CR)
–2693F18031System Board Asm, Model 212 only
–2613H89231System Board Asm, Model 551, CR
–2613H89241System Board Asm, Model 431, CR
–2613H89251System Board Asm, Model 331, CR
–2642H18611System Board Asm, Model 331, CR (NEW RAW CARD)
–2613H89301System Board Asm, Model 431, 486SLC2
–2642H18601System Board Asm, Model 431, N421
–2761X87942Screw, M3.5
–2893F1830ARMemory SIMM, 2 Meg, Models 331, 431, 551
–2893F1840ARMemory SIMM, 4 Meg, Models 331, 431, 551
–2893F1850ARMemory SIMM, 8 Meg, Models 331, 431, 551
–2993F17901Bus Adapter Card Asm, Feature, Model 551 only
–2993F17911Bus Adapter Card Asm, Feature, Models 331, 431
–3293F1877ARFixed Disk, 160 MB, (Includes Cable and Bracket),
Model 551 only
–3393F18581Bracket Kit, Model 551 only
–3493F18571Cable Asm, Fixed Disk, Model 551 only
–3593F18811Cable, Diskette, Short, Model 551 only
–3678X89932Screw, M3, Model 551 only
System Unit Assemblies7
Assembly 1: (continued)
8Store Systems Parts Catalog
Asm–Part
IndexNumberUnitsDescription
1–3793F18541Document Tray
–3848G90791Quick Reference Card, Japan
–3848G90851Quick Reference Card, Korea
–3993F06634Rubber Foot
System Unit Assemblies9
Assembly 2: System Units, 4694, Models 154 and 254
10Store Systems Parts Catalog
Asm–Part
IndexNumberUnitsDescription
2–NPSystem Unit Assembly, 4694, Model 154
–193F18181Insert, Rear Cover Modesty Panel
–193F18991Panel, Rear Cover, Modesty
–293F18751Fence Asm, Integrated
–2A93F18601Flat Top Asm, Distributed
–393F18521Cover, Right Side
–44Foot (order Kit 85H4995, index 7)
–593F18511Cover, Left Side
–685H49951Hardware Kit, Contents:
Button, ON/OFF, White (X1)
Foot (X1), Models 001, 004, 024 only
Slot Guide, Long, Feature Card (X1)
Slot Guide, Short, Feature Card (X1)
Slot Cover, AT, Feature Card (X1)
Button, ON/OFF, White (X1)
Fuse, System Board, 5 A 125 V (X1)
Screw, Washer Head, M3 x 5 mm (X5)
Screw, Pan Head, 6-32 UNC x 4 mm (X2)
Mounting Bracket (X2)
Foot (X2), Models 041, 044, 144, 154, and 254 only
System Unit Assemblies11
Assembly 2: (continued)
31
30
10
37
10
10
29
28
36
38
32
33
34
10
10
11
27
35
17
18
25
12
14
24
15
39
16
40
19
10
10
21
22
23
DETAIL A
12Store Systems Parts Catalog
Asm–Part
IndexNumberUnitsDescription
2–NPSystem Unit Assembly, Detail A, 4694 Models 154 and 254
–1027Screw, Washer Head, M3 x 5 mm (order Kit 85H4995, index 6)
–111Fuse, System Board, 5 A, 125 V (order Kit 85H4995, index 6)
–1285H49751Riser Card, Model 154
–1292G94951Riser Card, Model 254
–1459G87131Cable Asm, VGA Feature (includes 2 mounting screws)
–1559G87142Cable Asm, RS232 (includes 2 mounting screws)
–1685H50041System Board, Model 154 (includes Fuse, No Memory Modules,
see Index 37)
–1685H49591System Board, Model 254 (includes Fuse, No Memory Modules,
see Index 37)
–1759G86861Cable Asm, Fixed Disk Drive
–1859G87301Cable Asm, LAN, 4.3 M
–1959G87111Cover
–214Foot (order Kit 85H4995, index 7)
–222Spacer, System Board (order Kit 85H4995, index 6)
–2392G95001Power Supply, 24 V DBCS, 160 W, Model 154
–2385H85261Power Supply, 24 V DBCS, 197 W, Model 254
–241Button, ON/OFF, White (order Kit 85H4995, index 6)
–2592G94371Front Cover Asm, (includes Door, Logo, LED Label, FDD Bezel)
–2792G94381Door, Front
–2859G86881Cover, Diskette Drive
–2959G88191Keylock Asm
–3038H58991Fixed Disk Drive, 850 MB
–3085H49741Fixed Disk Drive, 1.6 GB
–3159G867811.44 M Diskette Drive
–322Slot Guide, Feature Card (order Kit 85H4995, index 6)
–332Slot Cover, Feature Card (order Kit 85H4995, index 6)
–344Screw, Pan Head, 6-32 UNC x 4 mm (order Kit 85H4995)
–3559G86871Cable Asm, Diskette Drive
–36ARMounting Bracket, X2 or 4 (order Kit 85H4995, index 7)
–3792G94544 MB Memory Module
–3792G94558 MB Memory Module
–3792G947016 MB Memory Module
–3885H49701Spline, Model 154
–3885H49581Spline, Model 254
–3985H49601Cable Assembly, Parallel Port, Model 254
–4085H49731Dump Switch Asm
–92G94751Button, Short, Diskette Drive (package of 10)
System Unit Assemblies13
14Store Systems Parts Catalog
Loading...
+ 50 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.