IBM 04P4963, 1300 i, 1200 i User Manual
Part Number: 04P4963
ThinkPad i Series 1200/1300
Setup Guide
Unpacking checklist
Thank you for purchasing the IBM ThinkPad i Series 1200/1300 computer. Match the items on this list with the items in the box. If any item is
missing or damaged, please contact your place of purchase.
Ø Computer
Ø Battery pack
Ø AC Adapter
Ø CDs:
Ø Books:
Software Selections CD
Lotus SmartSuite CD or flyer
Recovery CD kit for Windows
Setup Guide
User's Reference
Ø Telephone cable
Ø Miscellaneous parts:
TrackPoint cap
Ø Power cord
Copyright IBM Corporation 2000
Ø Manual package for Windows
1
Setting up your computer
1. Connect power.
a. Turn the computer over. Set the battery pack in the
battery compartment (1), and slide it into place (2).
3
Pull the LCD latches (1) and open the LCD (2). Then
position the LCD so that it is convenient for viewing.
2
1
1
2
Secure the battery pack by sliding the battery-pack latch
to the lock position (3).
b. Connect the AC Adapter to the computer's power jack
(at the rear of the computer) in the order shown.
1
2
3
2. Turn on system.
a. Open the liquid crystal display (LCD).
1
b. Press the power switch (1).
1
3. Operating controls.
Using the TrackPoint
The TrackPoint is a unique device for moving the cursor on
the screen. You can perform all mouse operations with the
TrackPoint. The left and right click buttons function like the
left and right click buttons on a mouse. For an explanation of
the Internet Scroll Bar, see the
User's Reference
.
To move the cursor, use the red-topped stick at the center of
the keyboard. Press gently with your left or right index finger
in the direction you want to move the cursor. To select and
2
Loading...