HYUNDAI MOBIS AV230JGAN User Manual

DIGITAL NAVIGATION SYSTEM

User's Manual

DIGITAL NAVIGATION SYSTEM

User's Manual

Preface

Thank you for purchasing this Audio

iPod

Navigation System.

iPod® is a registered trademark of Apple

This user's manual explains how to use

Inc. the Kia Motor Audio Navigation System. Before using the product, read the contents of this user's manual carefully and use this product safely.

●

The screens shown in this manual may differ with the actual screens of the product.

●

#The design and specification of this product may change without prior notification for product improvement.

●

When transferring the vehicle to another individual, include this user's manual so that the next driver can continue its use.

All Map Database cannot be copied without permission. This is protected by U.S. copyright laws. All rights not expressly granted are reserved. You may not otherwise reproduce, modify, and distribute the content without M&Soft, Inc's prior written consent.

Bluetooth

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kia is under license. A Bluetooth required to use Bluetooth® wireless technology.

enabled cell phone is

Table of contents

PART 1

PRE-OVERVIEW

Introduction ………………………… 1-2

Controller and functions …………… 1-3

Basic operation and setting ………… 1-7

PART 2

AUDIO SYSTEM

Operating the radio ………………… 2-2

Operating the CD Player

Operating external devices ……… 2-22

………… 2-10

PART 3

NAVIGATION SYSTEM

Limitations of the navigation

system

……………………………… 3-2

Map Functions

Setting a destination …………… 3-12

Operating after setting

a destination ……………………… 3-28

Route guidance

Setup and Information …………… 3-36

……………………… 3-5

…………………… 3-30

PART 4

VOICE COMMAND SYSTEM

Operating voice command ………… 4-2

Setting up the voice command system

……………………………… 4-4

Voice command list ………………… 4-6

Table of contents

PART 5

Bluetooth® HANDS FREE

Before using the Bluetooth® Handsfree

…………………………… 5-2

Converting Bluetooth® Handsfree mode

………………………………… 5-2

Pairing and connecting a Bluetooth® phone

………………………………… 5-4

Bluetooth® Handsfree screen

………………………………… 5-9

layout

Making a call ……………………… 5-11

Answering a call ………………… 5-13

Operating menus during a call

Phone Book ……………………… 5-16

Call History List …………………… 5-19

Phone Music

Bluetooth® settings ……………… 5-24

Important information …………… 5-30

……………………… 5-21

…… 5-14

PART 6

HVAC MODE

Cautions upon operating HVAC mode ………………………………… 6-2

HVAC mode screen layout

HVAC System operations …………… 6-3

………… 6-2

PART 7

REAR CAMERA

About Rear Detection Camera

………… 7-2

PART 8

APPENDIX

Troubleshooting guide ……………… 8-2

Map legend

INDEX ………………………………… 8-8

………………………… 8-5

PART 1 PRE-OVERVIEW

PART 1

PRE-OVERVIEW

Introduction ………………………… 1-2

Important information about this

………………………………… 1-2

manual Precaution for safe usage

Controller and functions …………… 1-3

Control panel …………………………… 1-3 Steering wheel remote controller HVAC System

Basic operation and setting ………… 1-7

Turning the Power ON ………………… 1-7

System Power ON ……………………… 1-7 Turning the Power OFF ………………… 1-7 Turning the Audio ON/OFF Adjusting audio volume How to operate the screen menu

Operating typical screen menu ………… 1-8

Inputting letter by using screen

………………………………… 1-8

keyboard

Displaying the list ……………………… 1-8

Selecting an item in a list ……………… 1-9

Sorting items from list ………………… 1-9

……………… 1-2

……… 1-5

…………………………… 1-6

…………… 1-7

………………… 1-8

……… 1-8

How to operate menu by voice

……………………………… 1-9

command

Conditions for voice recognition

…………………………………… 1-9

system Giving voice command

Sound setting …………………………… 1-10

FAD/BAL …………………………………1-10 BASS/MID/TREB Auto volume control ON/OFF Touch screen beep ON/OFF

Display setting ………………………… 1-11

Display mode …………………………… 1-11 Brightness Display OFF Display ON

Setting Picture Frame …………………… 1-12

Display Picture Frame Viewing Current Time Setting the Clock

………………… 1-10

………………………… 1-11

………… 1-11

…………… 1-11

……………………………… 1-11

…………………………… 1-11

……………………………… 1-11

………………… 1-12

……………………… 1-13

PRE-OVERVIEW

PRE-OVERVIEW 1-1

PART 1 PRE-OVERVIEW

Introduction

Important information about this manual

This user manual contains instructions related

to safety. Closely observe and comply with all

of the safety instructions found within this

manual.

WARNING !

Disobeying the warnings listed within this

user's manual may cause fatal or serious inju-

ries. Warnings indicate matters which may

directly lead to accidents.

CAUTION!

Disobeying the cautions listed within this user

manual may lead to accidents or cause injury.

Cautions indicate matters which may lead to

vehicle damage or malfunction.

INFORMATION

Information which the user must be aware or

allows for more convenient use of the device.

1-2 PRE-OVERVIEW

Precaution for safe usage

WARNING !

●

Do not operate the Audio Navigation system

while driving.

●

Do not disassemble, assemble, or modify the

Audio Navigation system.

●

Do not watch the screen for prolonged peri-

ods of time while driving.

●

Set the volume to a level which allows the

driver to be aware of external conditions.

CAUTION!

●

Do not operate the Audio Navigation sys-

tem for prolonged periods of time with the

vehicle ignition in ACC. Such operations

may lead to battery discharge.

●

Be cautious not to spill water or introduce

foreign objects into the device.

●

Do not cause severe shock to the device.

Direct pressure onto the front side of the

monitor may cause damage to the LCD or

touch panel.

●

In case of product malfunction, please con-

tact your place of purchase or service cen-

ter.

●

When cleaning the touch screen, make sure

to turn off the device and use a dry and

smooth cloth. Never use tough materials,

chemical cloths, or solvents (alcohol, ammo-

nia, benzene, thinners, etc.) as such materials

may damage the device panel or cause color

and quality deterioration.

Reference Page

This indicates the title and page that you

should refer to.

This indicates a key on the control panel.

Voice Command

This indicates an operation by voice com-

mand.

Controller and functions

Control panel

Power / Volume control knob

●

Push knob (over 0.8 second) : turns the

power off.

●

Push knob (under 0.8 second) : each time the

knob is pressed, the Audio is turned on and off.

●

Tune knob : the range of volume adjustment

is between 0 ~ 35.

FM/AM

Each press will change the bands in the fol-

lowing order: FM1

SAT

Each press will change the bands in the fol-

lowing order: SIRIUS1



SIRIUS1 ...



FM2

AM  FM1 ...



SIRIUS2

SIRIUS3

MEDIA

Each press will change the bands in the fol-



lowing order: DISC(CD, MP3)



(AUX)  (Phone Music)

TUNE

●

FM/AM Mode : push the keys to search for

(USB or iPod)



DISC(CD, MP3)...

the desired frequency. Press the key to

receive the selected frequency.

●

SAT Mode : push the keys to search for the

desired channel. Press the knob to receive

the selected channel.

●

CD Mode : push the keys to search for the

desired track. Press the key to play the

selected track.

●

MP3, USB Mode : push the keys to search

for the desired file. Press the key to play

the selected file.

●

iPod Mode : push the keys to search for the

desired song. Press the key to play the

selected song.

PRE-OVERVIEW 1-3

PRE-OVERVIEW

PART 1 PRE-OVERVIEW

MAP VOICE

Displays the map screen for the current posi-

tion.

DEST

Displays the displays setting screen.

ROUTE

Displays the Route menu screen.

SETUP

Displays the Setup menu screen.

PHONE

Displays the Bluetooth handsfree screen.

SEEK/TRACK Up/Down

●

SHORT KEY(less than 0.8 second)

t FM/AM Mode : automatically searches for

the previous or next broadcast frequency

and starts playing.

t

SAT Mode : receives the previous or next

channel.

t

CD Mode : plays the previous or next track.

t MP3, USB Mode : Plays the previous or

1-4 PRE-OVERVIEW

next file.

t iPod Mode : plays the previous or next song.

●

LONG KEY(over 0.8 second)

t

FM/AM Mode : quickly moves through the

frequencies while the button is pressed.

Once released, automatically searches for

broadcasts which can be received.

t

SAT Mode : quickly moves to the previous

or next channel.

t CD Mode : REW/FF the current playing

track.

t MP3, USB Mode : REW/FF the current play-

ing file.

t

iPod Mode : REW/FF the current playing

song.

DISC eject

Ejects the inserted disc.

DISC insert indicator LED

Displays whether a DISC has been inserted.

INFORMATION

)0$0

32:(592/

0$392,&(

and

key

If pressing and holding the

for over 0.8 seconds does not shut down the

system, press the

keys simultaneously for over 10 seconds to

reset the software. The system power will

shut-off and the system will restart.

Steering wheel remote controller

MODE

Each time the Mode key is pressed, the mode

changes in the following order: FM1



AM  SIRIUS1  SIRIUS2  SIRIUS3 



(DISC)

(USB or iPod)  (AUX)  (Phone



Music)

FM1 ...

If an unsupported DISC is inserted, if there is

no disc, or if an external device (e.g. iPod, USB

memory stick, etc.) has not been connected,

the mode will not be recognized and auto-

matically switch to the next mode.



FM2

●

Press this key for over 0.8 second to turn the

Audio ON and OFF.

●

Press this key when the Power is turned off

to turn the power on.

Volume Up/Down

Increases or decreases the volume within a

range between 0 ~ 35. Volume for navigation

and voice guidance can be adjusted in the

setup mode.

Seek Up/Down

●

SHORT KEY(less than 0.8 second)

t

FM/AM : receives the previous or next pre-

set frequency.

t

SIRIUS Mode : receives the previous or

next preset channel.

t

CD Mode : plays the previous or next

track.

t

MP3, USB Mode : plays the previous or

next file.

t

iPod Mode : plays the previous or next

song.

●

LONG KEY(Over 0.8 second)

t FM/AM Mode : quickly moves through the

frequencies while the key is pressed.

Once released, automatically searches for

broadcasts which can be received.

t

SIRIUS Mode : quickly moves to the previ-

ous or next channel.

t

CD Mode : REW/FF the current playing track.

t MP3, USB Mode : REW/FF the current play-

ing file.

t

iPod Mode : REW/FF the current playing

song.

Voice Recognition

Starts Voice Recognition.

CALL

Press this key to receive an incoming call. If

pressed while in Audio/Navigation mode, the

bluetooth handsfree screen will be displayed.

END

Press this key to reject an incoming call.

If pressed while on a call, then the call will be

terminated.

PRE-OVERVIEW 1-5

PRE-OVERVIEW

PART 1 PRE-OVERVIEW

HVAC System

(FAN)

Sets the fan level.

CLIMATE

Displays the general status of the HVAC sys-

tem, such as temperature, outside tempera-

ture, fan mode, and fan level.

MODE

Sets the fan direction.

A/C

Turns the air conditioner ON/OFF.

1-6 PRE-OVERVIEW

1 45 3

67 8

FRONT

Removes humidity and frost by blowing fan

towards the front window.

Switches the air intake mode to recirculation

or exterior mode.

OFF

Turns the HVAC system off.

REAR

The rear window defroster is turned ON/OFF.

When the defroster is operating, the light on

the display window and at the top of the

switch will turn on.

TEMP

Raises or lowers the driver-side temperature.

AUTO

Operates heating/cooling auto mode which

maintains cabin temperature at suitable levels

by using the outside temperature sensor.

Once AUTO mode is operated, the light at the

top of the switch will turn on.

TEMP

Raises or lowers the passenger-side tempera-

ture.

DUAL

Turns DUAL operation on or off. Upon turning

on DUAL, the driver-side and passenger-side

temperature can be operated independently.

Basic operation and setting

Turning the Power ON

1. Turn the ignition key onto ACC or ON. If the

system power had been on when the igni-

tion was turned off, the system will turn

back on automatically.

If the system power had been off when the

ignition was turned off, the system will

remain off. In this case, press the

knob to turn on the system power.

3:5

386+

System Power ON

INFORMATION

As system booting starts from the point the

door lock is unlocked, the device may com-

plete booting before the ACC is turned on or

386+

3:5

the

Consequently, the booting screen may not be

displayed upon initially turning on the system

power.

knob is pressed.

Once system booting is complete, the most

recent operated mode will be displayed. For

example, turning on the system will display

FM1 radio mode if the last operated mode

prior to turning off the system had been

FM1 radio mode.

Turning the Power OFF

386+

3:5

If the

knob is pressed for over 0.8

second, a beep will sound and the system

power will be turned off.

Turning the Audio ON/OFF

Press the

knob for under 0.8 second

386+

3:5

with the system power on to turn the Audio

on and off.

Voice Command

1. Press the key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Audio On"

"Audio Off"

INFORMATION

Conducting the following operations while

the AUDIO is off will automatically turn on the

Audio system.

●

Pressing the Audio related keys (

6$7, 0(',$

●

Inserting a DISC or connecting an external

device.

)0$0

PRE-OVERVIEW 1-7

PRE-OVERVIEW

PART 1 PRE-OVERVIEW

Adjusting audio volume

32:(592/

Turn the

tion to increase the volume and counter-

clockwise to decrease the volume.

INFORMATION

●

The range of volume adjustment is between

0 ~ 35.

●

Adjustments to the volume cannot be made

while the AUDIO is turned off.

How to operate the screen menu

Operating typical screen menu

●

If a menu button on the screen is pressed,

the corresponding function will begin oper-

ation.

●

The same menu button may perform differ-

ent functions depending on the length of

time the button is pressed (under 0.8 sec-

onds or over 0.8 second). For more informa-

tion, refer to the specific function within this

user manual.

●

The current operated button will be high-

lighted upon display.

1-8 PRE-OVERVIEW

knob in clockwise direc-

●

Buttons which cannot be operated under

the current conditions will be displayed in

disabled state. Pressing a disabled button

will not perform any operation.

Inputting letter by using screen

keyboard

$%&

: Displays the English alphabet keypad.

: Displays the French alphabet keypad.

(if available)



: Displays the number and symbol key-

pad.

'HOHWH

: Deletes the previously inputted letter.

Pressing for over 0.8 second will delete

all content.

6SDFH

: The input is completed.

: Restores to previous screen. The inputted

text will not be saved.

Displaying the list

/LVW

: Even if input is not complete, the cur-

rent matching items from the data-

base will be displayed.

INFORMATION

The number at the upper-right side of the

screen displays the number of current matches.

Selecting an item in a list

Sorting items from list

How to operate menu by voice command

Conditions for voice recognition system

Most of the functions within the Audio and

Navigation system can be operated by voice.

Please follow the instructions below for opti-

mal voice recognition performance.

PRE-OVERVIEW

: Moves to the next page or previous

page.

The button will be displayed if

the text is too long to be displayed in

one button.

Press the

the end of the text. Press the

move the cursor to the front of the text.

button to move the cursor to

button to

Select the desired sorting method to reorga-

nize the list in accordance to the selected

method.

●

Close all windows and the sunroof. The

voice recognition can be improved when in

a quiet environment.

●

Press the voice recognition button and say

the desired voice command after the sound

of the beep.

●

The microphone is positioned above the

driver so that voice commands can be said

while maintaining a proper posture.

●

Pronounce the voice commands naturally

and clearly as if in normal conversation.

PRE-OVERVIEW 1-9

PART 1 PRE-OVERVIEW

Giving voice command

1. Press the key on the steering wheel

remote controller.

A voice command window will be displayed

on the lower side of the screen followed by

a "Command please" system voice com-

ment.

Once the icon changes into the

icon on the pop-up screen with a beep

sound, say the desired voice command.

[Voice command list], page 4-6.

[ Searching a destination by voice com-

mand], page 4-19.

1-10 PRE-OVERVIEW

INFORMATION

Press the key shortly to input the desired

voice command. The system voice instruction

comment will immediately terminate. When

the

icon changes into the icon with a

beep sound, it is possible to input voice com-

mands.

Audio Sound setting

6RXQG

Press the

each Audio mode (FM/AM, SIRIUS, CD, MP3,

USB, iPod and AUX) to display the Sound set-

ting screen.

FAD/BAL

The position of the sound can be adjusted by

using the up-down and left-right (

, ) buttons on the left side of the

screen.

Press the

sound in the center of the vehicle.

button on the main screen of

'HIDXOW

button to position the

, ,

BASS/MID/TREB

The BASS/MID/TREB can be adjusted by using

the left/right buttons (

, ) of each con-

trol.

Auto volume control ON/OFF

Each time the

$XWRYROXPHFRQWURO

button is

pressed, the Auto volume control function is

turned on or off.

INFORMATION

The Auto Volume Control is a function which

automatically adjusts the volume level in

accordance to changes in vehicle speed.

Touch screen beep ON/OFF

Each time the

pressed, the beeping sound that follows each

press on the screen will turn on or off.

7RXFKVFUHHQEHHS

button is

Display setting

',63

Press the

display the Setup menu screen.

Display mode

Press the button for the desired display mode

from

modes. The current selected mode is high-

lighted.

$XWRPDWLF

●

The display is automatically converted

between Daylight and Night modes in

accordance to the on/off state of the vehi-

cle taillights.

key on the control panel to

$XWRPDWLF, 'D\OLJKW

, and

1LJKW

'D\OLJKW

●

The bright screen is always maintained

regardless of the on/off state of the vehicle

taillights.

1LJKW

●

The dark screen is always maintained

regardless of the on/off state of the vehicle

taillights.

Brightness

Use the left/right buttons ( , ) for con-

trol to make adjustments.

Display OFF

Press the

'LVSOD\2II

button.

Display ON

Press anywhere on the black screen.

The screen prior to display setting will be dis-

played.

PRE-OVERVIEW 1-11

PRE-OVERVIEW

PART 1 PRE-OVERVIEW

Setting Picture Frame

Display Picture Frame

1. Press the

DISPLAY Setup screen.

2. Press the

Frame> Setup screen.

3. The registered image will be displayed once

power is turned off.

For Picture Frame setup, the frame must be

set in USB Image mode. (For details on setting

the Picture Frame, refer to the USB IMAGE

page.)

1-12 PRE-OVERVIEW

3LFWXUH)UDPH

0\,PDJH

INFORMATION

button in the

button in the <Picture

4. To delete an image registered as a frame,

'HOHWH,PDJH

press the

button.

Viewing Current Time

&/2&.

Press the

on the front panel shortly

(under 0.8 second) to display the current time

at the center of the screen.

INFORMATION

If the screen is turned off, selecting the

&/2&.

will display the current time on the

entire screen.

Setting the Clock

Press and hold the

(over 0.8 second) to display the Clock setting

screen.

●

GPS Time

The time received from the GPS will be dis-

played automatically.

●

Clock Type

Selects the clock type shown as the entire

screen when the system power is turned off.

●

Time Format

When the clock type is digital, this button is

used to convert the time between 12 hour/ 24

hour systems.

&/2&.

on the front panel

●

Daylight Saving Time

Turns the Daylight Saving Time function on or

off.

INFORMATION

Clock setting mode can be displayed while

the clock is displayed on the screen even

when the system is turned off.

PRE-OVERVIEW

PRE-OVERVIEW 1-13

PART 2 AUDIO SYSTEM

Operating the radio ……………… 2-2

Listening to the FM/AM radio ………2-2

FM/AM screen and functions

FM/AM Radio

HD Radio Technology(if equipped)

XM radio

……………………………2-2

Selecting FM/AM broadcast frequency

Storing FM/AM preset

Scanning FM/AM broadcast frequency

Starting HD Radio Mode

HD Radio Mode Screens and

Functions

……………………………2-6

Operating HD Radio Mode

HD Radio digital Broadcast On/Off

…………………………………2-8

Listening to the XM radio

XM screen and functions

Switching the XM mode (Channel /

Category)

……………………………2-9

Selecting XM broadcast channel

Storing XM preset

Scanning XM broadcast channel

…………2-2

2-3

………………2-4

2-5

……2-6

……………2-6

…2-7

……………2-8

……2-9

………………… 2-11

… 2-11

Operating the CD Player ………… 2-12

Precautions upon handling discs … 2-12

For safe and efficient operation

About CD Player

Supported disc formats

Disc/Content format compatibility

Inserting a Disc

Ejecting a Disc

Inserting/Ejecting Disc

…………………………………… 2-16

Listening to CD music

CD screen and functions

Selecting the CD track

REW/FF CD track

Setting Repeat function for

CD music

Setting Random function for

CD music

Scanning CD track ………………… 2-18

MP3 disc related information and

precaution

Listening to MP3 music

……………………… 2-12

…………………… 2-15

…………………… 2-17

…………………………… 2-17

………………………… 2-19

…… 2-12

…………… 2-13

2-14

…………… 2-15

…………… 2-16

………… 2-16

…………… 2-16

…………… 2-20

MP3 screen and functions

Selecting to MP3 music

REW/FF MP3 file

Viewing detail information for

MP3 file …………………………… 2-22

Setting Repeat function for

MP3 file

…………………………… 2-22

Setting Random function for

MP3 file

…………………………… 2-22

Scanning MP3 file

………… 2-20

…………… 2-21

…………………… 2-22

………………… 2-23

PART 2

)0$0

AUDIO SYSTEM

Operating external devices …… 2-24

Connecting iPod devices ………… 2-24

iPod®

……………………………… 2-24

Listening to iPod music

iPod screen and functions

Selecting an iPod song

REW/FF iPod song

Setting Repeat function for

iPod song

………………………… 2-27

Setting Random function for

iPod song

…………………………… 2-27

USB MP3 related information and

precaution

Precautions upon handling USB

Connecting the USB

Listening to USB music

Starting USB IMAGE Mode

USB IMAGE mode menu screen

configuration

Operating USB IMAGE Mode

…………… 2-25

………… 2-25

…………… 2-26

………………… 2-27

………………………… 2-28

… 2-28

……………… 2-30

…………… 2-30

………… 2-31

……………………… 2-31

……… 2-32

Connecting AUX

Playing AUX

AUX screen

AUX

…………………………………… 2-33

…………………… 2-33

……………………… 2-33

………………………… 2-33

AUDIO SYSTEM

AUDIO SYSTEM 2-1

PART 2 AUDIO SYSTEM

Operating the radio

FM/AM Radio

Listening to the FM/AM radio

1. Press the

The FM/AM radio band of the most recent

listened station will be displayed.

2. Press the

radio band. Each press will change the

bands in the following order: FM1



AM  FM1

3. Select the desired broadcast frequency.

[Selecting FM/AM broadcast frequency],

page 2-5.

2-2 AUDIO SYSTEM

key on the control panel.

key to change the desired



Voice Command

1. Press the #key on the steering wheel

remote controller.

After the beep sound, say a command.

" Radio"

"(Radio) AM"

"(Radio) FM"

"FM <1 or 2>"

"AM Frequency <530 to 1710>"

"FM Frequency <87.5 to 107.9>"

"AM Preset <1 to 6>"

"FM <1 or 2> Preset <1 to 6>"

FM2

FM/AM screen and functions

c a

Mode display : Displays the FM1/FM2/ AM

modes.

SEEK/SCAN/PRESET SCAN : If SEEK/SCAN /

PRESET SCAN is operating, the switch is

displayed.

Frequency : Displays the current playing

frequency.

h i

STEREO indicator : If the current frequency

is a stereo broadcast, the indicator is dis-

played.

Program Service name: Displays the pro-

gram service name if data is being broad-

casted.

Program Type name: Displays the program

type name if data is being broadcasted.

Frequency bar : Displays the position of

the current frequency within the total fre-

quency range.

Radio Text: Displays the radio text informa-

tion if data is being broadcasted.

%$1'

button : Changes the desired

radio band. Each press will change the

bands in the following order: FM1



FM1

TUNE Up/Down button

●

SHORT KEY(less than 0.8 second)



t The frequency is increased or decreased by

1-step increments (FM : 0.2MHz, AM :

10kHz).

●

LONG KEY(over 0.8 second)

t The frequency is rapidly increased or

decreased by 1-step increments (FM :

0.2MHz, AM : 10kHz) and stops operation

upon KEY RELEASE.

SEEK Up/Down button

●

SHORT KEY(less than 0.8 second)

t Automatically searches for the previous or

next broadcast frequency and starts

playing.

●

LONG KEY(over 0.8 second)

t Quickly moves through the frequencies

while the button is pressed. Once released,

it automatically searches for broadcasts

which can be received.

Preset buttons : The desired frequency can

be preset and selected.

FM2

[Storing FM/AM presets], page 2-5.

57H[W

button : Turns the Radio Text

information on and off.

INFORMATION

57H[W

If the

displayed even if there is text being transmit-

ted from the broadcast station.

If the

bar will not be displayed. Even if the

is on ON state, text may not be displayed if

text is not being received from the broadcast

station.

is on OFF state, text will not be

57H[W

is on ON state, the frequency

6FDQ

button : Scans all frequencies or

just the preset frequencies for 5 seconds

each.

[Scanning FM/AM broadcast frequency],

page 2-5.

6RXQG

button : Adjusts the FAD/BAL,

BASS/MID/TREB controls.

[Audio sound setting], page 1-11.

57H[W

AUDIO SYSTEM 2-3

Operating the radio

PART 2 AUDIO SYSTEM

Storing FM/AM presets

1. Select the desired frequency.

[Selecting FM/AM broadcast frequency],

page 2-4.

2. Press the preset button to store for over 0.8

second. The frequency will become stored

along with a beep sound.

INFORMATION

Six preset frequencies each for FM1/FM2/AM

modes can be stored using the above instruc-

tions.

Scanning FM/AM broadcast frequency

1. Press the

●

1. Press the #key on the steering wheel

2. After the beep sound, say a command.

2-4 AUDIO SYSTEM

6FDQ

button.

SCAN (less than 0.8 second) : Scans all fre-

quencies and plays only frequencies with

superior reception for 5 seconds each.

Voice Command

remote controller.

"Scan"

●

PRESET SCAN (over 0.8 second): Scans the 6

frequencies stored as preset frequencies in

the current band for 5 seconds each.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Preset Scan"

2. Press the

6FDQ

button again to continue

listening to a frequency. The scan will be

terminated and the current frequency will

continue to be played.

INFORMATION

When scanning has completed an entire revo-

lution, the scan function will be terminated

automatically and the previous played frequen-

cy will be restored.

Selecting FM/AM broadcast frequency

There are 3 ways to select the broadcast

frequency - (a) selecting through presets,

(b) selecting through SEEK, (c) selecting

through manual search.

(a) Selecting a frequency through presets

Press the preset button of the desired

broadcast frequency.

INFORMATION

●

Press the A or  keys for a short time

on the steering wheel remote controller.

The preset frequencies of the current band

will be selected in order.

●

There are 6 different preset frequencies

each for FM1, FM2, and AM modes.

[Storing FM/AM preset], page 2-5.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Preset <1 to 6>"

"Preset Up"

"Preset Down"

(b) Selecting a Broadcast frequency through

SEEK

Press the

control panel or the

6((.

75$&.



or buttons on

keys on the

FM1, FM2, and AM mode screens for less than

0.8 second. Once the SEEK function is opera-

ting (SEEK indicator blinking), the next or pre-

vious broadcast frequency with superior

reception will be searched automatically.

INFORMATION

●

Press the

control panel or the

steering wheel remote controller or the

buttons on FM1, FM2, and AM mode

screens for more than 0.8 second to quickly

move to the nearest desired frequency. Once

6((.

75$&.



or  keys on the

keys on the

the button is released, the next frequency

with superior reception will be searched

automatically.

●

While the SEEK function is operating, pressing

75$&.

the

6((.

keys on the control



panel again will terminate SEEK operation

and select the current frequency.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Seek Up"

"Seek Down"

manual search

Press the

781(

clockwise or counter-clockwise direction.

Each click on the tune knob or the

quency by 1 step (FM: 0.2 MHz, AM: 10 kHz).

or buttons or turn the

knob on the control panel in

buttons will increase or decrease the fre-

AUDIO SYSTEM 2-5

Operating the radio

PART 2 AUDIO SYSTEM

HD Radio Technology(if equipped)

Starting HD Radio Mode

1. Press the

2. Press the

2-6 AUDIO SYSTEM

)0$0

key to turn on FM/AM

mode. If an HD Radio broadcast is received

radio mode will switch from analog broad-

cast to HD Radio broadcast.

)0$0

key will convert the



mode in the order of FM1

FM2



and convert to HD Radio broadcast once an

HD Radio broadcast becomes received.

HD Radio Mode Screens and Functions

3 2

1. Preset Button – desired HD frequencies

are saved for convenient frequency selec-

tion. Saves up to HD1~HD8 according to

sub broadcasts.

HD Broadcasting reception display –

Displays HD main, broadcast receiving

from sub broadcast 1 ~ 8. The yellow indi-

cates the currently playing sub broadcast.

Broadcast station name

Detail On – Displays detailed information

for current broadcast. (Refer to page 00)

HD sub broadcast move button – Moves

from HD main 1 broadcast to sub 8 broad-

cast.

INFORMATION

HD Radio broadcasts simultaneously receive

up to 8 different sub broadcasts for each

channel, allowing users to listen to various

broadcasts. Main 1 broadcast is a HD broad-

cast for the same broadcast contents as ana-

log, while sub 2 ~ 8 are broadcasts of different

contents.

Operating HD Radio Mode

●

Selecting a Frequency

As HD Radio is included within Radio mode,

the methods of moving between channels,

saving presets, searching, or methods of sear-

ching frequencies are identical.

However, while the HD Radio is turned on, the

HD Radio related icon display will become

active when within regions where HD radio

can be received.

●

Selecting frequency through Preset

This allows you to select previously saved HD

Radio frequencies for broadcast.

1. Press the buttons with HD1~HD8 displayed

above the preset button to listen to the cor-

responding HD Radio channel broadcast.

●

Selecting frequency through TUNE

1. Select a channel receiving HD Radio broad-

cast automatically or manually and press the

00 button to move to the corresponding HD

Radio channel sub broadcast.

INFORMATION

For HD Radio broadcast channels without sub

channels, the sub channels of sub numbers

will be skipped to move only to channels

which can be received.

●

Storing a frequency to a preset button

●

Storing Manually

This function allows you to manually save the

desired sub broadcast frequency within the

currently playing HD Radio broadcast channel.

Method of saving is identical with the method

of saving radio presets. After saving is com-

plete, the HD Radio sub broadcast number

will be displayed on above the frequency.

HD Radio Digital Broadcast On/Off

HD Broadcasts can be turned on and off for

HD Radio FM and AM mode.

In Setup > Main setup screen, press the On/

Off setting for the desired HD Radio mode.

AUDIO SYSTEM 2-7

Operating the radio

PART 2 AUDIO SYSTEM

SIRIUS radio

Listening to the SIRIUS radio

1. Press the

2. Press the

3. Select the desired broadcast channel.

6$7

key on the control panel.

The Sirius radio band screen of the most

recent listened station will be displayed.

6$7

key to change the desired

radio band. Each press will change the

bands in the following order: SIRIUS1



SIRIUS2

SIRIUS3  SIRIUS1

[Selecting SIRIUS broadcast channel],

page 2-7.

2-8 AUDIO SYSTEM

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"SIRIUS"

"SIRIUS <1 or 2 or 3>"

"SIRIUS Channel <0 to 223>"

"SIRIUS <1 or 2 or 3> Preset <1 to 6>"



SIRIUS screen and functions

hgi j k

Mode display: Displays the SIRIUS1/

SIRIUS2/SIRIUS 3 modes.

Channel number: Displays the current

playing channel.

SCAN/PRESET SCAN indicator: If SCAN/

PRESET SCAN is operating, the switch is

displayed.

Category name: Displays the category

name.

Channel name: Displays the channel

name.

Song/Program title: Display the song or

program title.

Artist name: Displays the artist or other

related information.

INFORMATION

The Song title display may be delayed in

accordance to the reception quality of the

Sirius broadcast.

&$7

button : Switches between chan-

nel mode and category mode.

[Switching the SIRIUS modes], page 2-7.

c , : Moves to the next or pre-

vious category, and automatically plays the

first channel within the selected category.

e, : Moves to the next or previous

channel.

3UHVHW

buttons : The desired channel

can be preset and selected.

[Storing SIRIUS presets], page 2-9.

,QIR

button : Displays the Title, Artist,

Composer, and other information for the

current received channel if the informa-

tion exists.

6HDUFK

button: Selects the channel by

directly inputting the channel number.

[Selecting SIRIUS broadcast channel],

page 2-7.

/LVW

button: Displays the channel or

category list.

[Selecting SIRIUS broadcast channel],

page 2-7.

6FDQ

button: Scans all frequencies or

just the preset frequencies for 5 seconds

each.

[Scanning SIRIUS broadcast chan-

nel], page 2-10.

6RXQG

button : Adjusts the FAD/BAL,

BASS/MID/TREB controls.

[Audio sound

setting], page 1-11.

Switching the SIRIUS modes (Channel /

Category)

Each time the

&$7

button is pressed, the

mode will switch between channel mode and

category mode.

Category mode will begin operating when the

orange light is turned ON.

Selecting SIRIUS broadcast channel

There are 5 ways to select a broadcast channel

- (a) selecting through presets, (b) selecting

with channel Up/Down, (c) Selecting a chan-

nel through manual search, (d) selecting

through channel/category list, (e) selecting by

directly inputting the channel number.

(a) Selecting a channel through presets

Press the preset button of the desired chan-

nel.

INFORMATION

●

Press the A or  keys on the steering

wheel remote controller for less than 0.8

second.

The preset channels of the current band will

be selected in order.

●

There are 6 preset channels each for

SIRIUS1, SIRIUS2, and SIRIUS3.

[Storing SIRIUS presets], page 2-9.

AUDIO SYSTEM 2-9

Operating the radio

PART 2 AUDIO SYSTEM

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Preset <1 to 6>"

"Preset Up"

"Preset Down"

(b) Selecting with Channel Up/Down

Press the

control panel or the

SIRIUS1, SIRIUS2, or SIRIUS3 mode screens for

less than 0.8 second.

The previous or next channel will be selected.

●

2-10 AUDIO SYSTEM

75$&.

6((.

keys on the



or buttons on

INFORMATION

If in Channel mode, the channel is selected

from all channels. If in Category mode, the

previous or next channel of each category is

selected.

Press the

control panel or the

steering wheel remote controller or the

mode screens for more than 0.8 second to

75$&.

6((.

keys on the



or  keys on the

buttons on SIRIUS1, SIRIUS2, and SIRIUS3

quickly move to the nearest desired channel.

Once the button is released, the current chan-

nel will be selected.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Channel Up"

"Channel Down"

781(

1. Turn the

knob on the control panel

in clockwise or counterclockwise direction.

Each click on the

781(

knob will display

the channel information of the previous or

next channel. The current playing channel

will continue to be played.

INFORMATION

If in Channel mode, the channel is selected

from all channels. If in Category mode, the

first channel of each category is selected.

2. Press the

781(

knob at the desired chan-

nel. The selected channel will begin

playing.

(d) Selecting channel through channel/

category list

1. Press the

●

If in channel mode, the Channel list screen

/LVW

button.

will be displayed.

●

If in category mode, the Category list screen

will be displayed.

Select the desired category button to dis-

play the channel list screen for the corres-

ponding category.

2. Input desired channel number, and press

'RQH

the

The previous screen will be restored and

the selected channel will begin playing.

button.

Storing SIRIUS presets

1. Select the desired channel.

[Selecting SIRIUS broadcast channel],

page 2-7.

Operating the radio

2. Select the desired channel button.

The previous screen will be restored and

the selected channel will begin playing.

(e) Selecting channel by directly inputting

the channel number

6HDUFK

1. Press the

The Channel search screen will be dis-

played.

button.

INFORMATION

To prevent inputting a channel which exceeds

the channel range, numbers which cannot be

inputted are set to disabled state.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Channel<0 to 223>"

2. Press the preset button for over 0.8 second.

The frequency will be saved along with

beep sound.

INFORMATION

Six preset frequencies each for SIRIUS1/

SIRIUS2/ SIRIUS3 modes can be stored using

the above instructions.

AUDIO SYSTEM 2-11

PART 2 AUDIO SYSTEM

Scanning SIRIUS broadcast channel

1. Press the

●

1. Press the #key on the steering wheel

2. After the beep sound, say a command.

●

1. Press the #key on the steering wheel

2. After the beep sound, say a command.

2-12 AUDIO SYSTEM

6FDQ

SCAN (under 0.8 second): Scans all channels

for 5 seconds each if in channel mode. If in

category mode, scans all channels within

the current category for 5 seconds each.

button.

Voice Command

remote controller.

"Scan"

PRESET SCAN (over 0.8 second): Scans the 6

preset channels within the current band for

5 seconds each.

Voice Command

remote controller.

"Preset Scan"

2. Press the

6FDQ

playing the channel.

The scan will be terminated and the current

channel will continue to play.

button again to continue

INFORMATION

●

Within the Channel list screen, if the

button next to each channel name is

pressed, the selected channel will be

excluded from SCAN operation.

●

When scanning has completed an entire

revolution, the scan function is automatical-

ly terminated and the previous played chan-

nel will be restored.

●

Channel 0 is the radio ID and contains infor-

mation required for SIRIUS activation.

Browsing detailed information about the

SIRIUS channel

1. Press the

2. Press the

,QIR

The detailed information (Title, Artist and

Composer) for the current channel will be

displayed.

The detailed information will be turned off.

button.

Operating the CDP

About CDP

Precautions upon handling discs

●

After using a disc, keep it in the original case

to prevent it from becoming scratched,

which may cause the CD to make popping

sounds.

●

Do not use heart-shaped discs, octagon-sha-

ped discs, or any other abnormally shaped

disc. Such discs may be the cause of mal-

functions.

●

Do not clean discs with chemical solutions

such as record sprays, antistatic sprays, antis-

tatic liquids, benzene, or thinners. Such

materials may cause the surface of DISC to

be unrecoverable.

●

Do not expose the disc to direct sunlight for

prolonged periods of time. Such exposure

may lead to disc deformation.

●

Dust, scratch, and other substances may

cause popping sound while playing as well

as sound deterioration.

●

Never place paper on either side of the disc

or write on disc surfaces. Sharp writing

utensils and inks used in felt-tip pens may

cause damage to disc surfaces

●

Clean fingerprints and dust off the signal

surface (coated side) of the disc with a soft

cloth.

Only soft cloths should be used as there are

no grooves for dust to get in as is the case

with LPs.

●

Copy-protected CDs such as S-type CDs

may not function in the device.

●

DATA CDs are not supported by the device.

(However, such discs may operate abnor-

mally.)

For safe and efficient operation

●

Do not disassemble the CDP for repair

purposes. Contact your place of purchase in

the case of malfunction. (Complete service

assistance will not be provided if the user

disassembles the device.)

●

Do not use water to clean the device.

Exposure to water may cause damage to

the device.

●

Be cautious not to introduce foreign subs-

tances into the disc insert slot.

Foreign substances may cause damage to

the interior of the device.

●

The device may fail to operate properly in

extremely hot or cold temperatures.

Discontinue the use of the device unless

normal temperature is maintained.

( The operational temperature range is:

-10

~ 65㾸).

㾸

●

Steam can be condensed on the fiberoptic

lens due to rain, wet conditions, or upon

operating the heating system.

●

Skipping may occur to the audio when dri-

ving on bumpy roads for prolonged periods

of time or upon severe shock to the vehicle.

●

Do not use chemical solvent to clean the

device. Such solvents may cause damage to

the surfaces of the device.

Always use a clean and dry cloth.

AUDIO SYSTEM 2-13

Operating the CDP

PART 2 AUDIO SYSTEM

WARNING !

Always give your full attention to driving.

Avoid operating your system in such a way

that you can be distracted driving vehicle

operation.

Supported disc formats

●

The disc types supported by this device are

as shown below.

Disc Size

3-inch (7.6 cm)

5-inch (12.7cm)

2-14 AUDIO SYSTEM

Disc Type Disc Media DIsc Format

CD CD-DA

CD-R MP3

CD-RW WMA

Multisession-CD DTS-CD

Disc format Audio format

CD LPCM

MPEG1, Layer3

MP3

MPEG2, Layer3

MPEG2.5

WMA Ver9

●

CD-R or CD-RW DISC burned with a bulk CD

without quality guarantees may not be

recognized by the device.

●

Inserting an abnormal disc may result in

faulty operation or recognition.

CD-ROM

CD-G

CD-EXTRA

CD-TEXT

Disc/Content format compatibility

●

Ordinary disc compatibility

t This device has been designed/ manufactu-

red to be compatible with software bearing

the following logo marks.

Audio-CD CD-R CD-RW

t CD-R/RW discs (Audio CD and MP3 CD)

created with CD-writing devices or perso-

nal computers may not properly function

in the device. This may be caused by

damaged recording method, contamina-

tion by dirt and other foreign substance on

the disc surfaces or play lens, and various

other reasons.

●

Special formats or special features regar-

ding software

t

CD-R/RW Compatibility.

t This device operates as a CD-ROM including

CD-R and CD-RW DISC written in CD Audio

or MP3 CD Format.

t However, other contents may cause abnor-

mal disc operation such noise.

t

The writing of CD-R and CD-RW discs with

this device is not supported.

t

Although CD-R/RW discs burned as audio

CDs which have not been finalized are not

supported by the device, some information

such as play time may be displayed.

t

PC-created DISC compatibility.

t When recording a disc with a personal com-

puter, even discs recorded in a "format com-

patible" with the formats described above

may not operate on the device caused by

software settings of the recording applica-

tion.

t In such cases, contact the software develo-

per.

t

Additional information regarding compati-

bility can be found on the CD-R/ RW

software disc box.

t DVD-R/RW are not suppor ted by the device.

●

Compressed audio compatibility

This device plays audio files compressed by

MPEG-1 audio stream layer 3(MP3) using 32,

44.1 and 48kHz fixed bit rates. Incompatible

files are not supported.

t

Variable bit rate files may operate, but the

play time information may not be properly

displayed.

t

Physical formats of CD : Model 1, Model 2 XA

format 1.

t

This device only supports tracks with file

extension of ".MP3" or ".WMA".

t

This device does not support multi-session

discs.

t

This device supports a maximum of 256 fol-

ders and maximum 512 files.

t

Folders and files which exceed this limit will

not be supported.

t

There are various bit rates which can be

encoded onto a MP3 file.

t his device has been designed to be compa-

tible with various bit rates.

t Audio which has been encoded at 128kbps

will sound similar to CD audio sound quality.

AUDIO SYSTEM 2-15

Operating the CDP

PART 2 AUDIO SYSTEM

Although this device supports low bit rate

MP3 tracks, such tracks may only provide

low quality sound.

t For stable operation, the use of files in

95kbps ~ 192kbps bit rate range and

44.1kHz SAMPLING frequency is recom-

mended.

2-16 AUDIO SYSTEM

Inserting/Ejecting Disc

Inserting a Disc

Insert the disc into the slot.

The disc will begin playing automatically after

it has been inserted.

INFORMATION

If the operation mode had been Audio mode

before inserting the disc, the device will

convert to the DISC mode screen and begin

playing.

If the operation mode had been Navigation

mode, then Navigation mode screen will

remain and the disc play status will be dis-

played through the Audio bar.

Ejecting a Disc

Press the key.

The disc will immediately be stopped and

ejected.

INFORMATION

●

If the operation mode had been in Audio

mode before ejecting the disc, the device

will be converted back to Audio mode.

If the operation mode had been in

Navigation mode, then Navigation mode

screen will remain.

●

If the disc is straddled on the slot without

removing for approximately 10 seconds, the

disc will be re-inserted automatically into

the disc player.

In such a case, the disc will not begin

playing automatically.

5DQGRP

Listening to CD music

1. Insert the CD or press the

0(',$

key on

the control panel if the CD is already inser-

ted.

2. Select the desired track.

[Selecting the CD track], page 2-16.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"DISC"

"CD"

"CD Track <1 to 665>"

CD screen and functions

d e

Mode display : Displays that the current

f h i

mode is CD mode.

RANDOM/REPEAT/SCAN indicator : If

RANDOM/REPEAT/SCAN is operating, the

switch is displayed.

Play time : Displays the play time.

Track number : Displays the current

playing track number.

button : Plays or pauses the cur-

rent track.

button : REW or FF

[Selecting the CD track], page 2-17.

button : Previous or next-

track.

[REW/FF CD track], page 2-17.

button : Plays the tracks on the

disc in random order.

, page 2-17.

5HSHDW

playing track.

[Setting Random function for CD music]

button : Repeats the current

Operating the CDP

[Setting Repeat function for CD music],

page 2-18.

6FDQ

button : Scans all tracks on the

disc for 10 seconds each.

[Scanning CD track], page 2-18.

6RXQG

button : Adjusts the FAD/BAL,

BASS/MID/TREB controls.

[Audio sound setting], page 1-11.

AUDIO SYSTEM 2-17

PART 2 AUDIO SYSTEM

Selecting the CD track

There are 2 ways to select a CD Track - (a)

selecting through Track Up/Down, (b) selec-

ting through searching Track.

(a) Selecting through Track Up / Down

Press the

control panel or the

steering wheel remote controller or the

buttons on the screen for less than 0.8

second.

The next or previous track will begin playing.

INFORMATION

If the

6((.

key on the steering wheel remote

controller or the

pressed shortly while the track has played for

more than 3 seconds, the start of the current

track will begin playing.

If the track has been playing for less than 2

seconds, the start of the previous track will

begin playing.

2-18 AUDIO SYSTEM

75$&.

6((.

keys on the



or  keys on the

key on the control panel or the

button on the screen is

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Next Track"

"Previous Track"

(b) Selecting track through search

1. Turn the

2. Press the

781(

knob on the control panel

in clockwise or counter-clockwise direction.

Each click on the

781(

knob will display

the information of the next or previous

track. The current playing track will conti-

nue to be played.

781(

knob at the desired track.

The searched track will begin playing.

REW/FF CD track

Press and hold the

6((.

75$&.

keys on



the control panel or steering wheel remote

controller or the

or buttons for over

0.8 second.

The track will play 20 times faster while hol-

ding the button and return to normal play

when the button is released.

Setting Random function for CD music

5DQGRP

Press the

button.

Each press will change the function in the fol-

lowing order: RANDOM



RANDOM OFF 

RANDOM

●

RANDOM : plays all tracks in the disc in ran-

dom order.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Random"

Say "Normal Play" in order to terminate the

set Random function.

Setting Repeat function for CD music

5HSHDW

Press the

button. Each press will

change the function in the following order:



REPEAT

REPEAT OFF  REPEAT

* REPEAT : repeats the current playing track.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Repeat Track"

Say "Normal Play" in order to terminate the

set Repeat.

Scanning CD track

1. Press the

6FDQ

button. Each press will

change the function in the following order :



SCAN

SCAN OFF  SCAN.

●

SCAN : Scans all tracks in the disc for 10

seconds each.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Scan"

Say "Normal Play" in order to terminate the

set Scan function.

6FDQ

3. Press the

button again to continue

listening to the track.

The scan will be terminated and the current

track will continue to be played.

INFORMATION

When scanning has completed an entire revo-

lution, the scan function is automatically ter-

minated and the previous played track will be

restored.

Operating the CDP

AUDIO SYSTEM 2-19

PART 2 AUDIO SYSTEM

MP3

MP3 disc related information and

precaution

●

Information

t

The MP3 file standards supported by the

device are as follows.

t Accept able standard: MPEG1 AUDIO LAYER 3

t Acceptable sampling frequency: 32, 44.1,

48 (KHz)

t

Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96,

112, 128, 160, 192, 224, 256, 320 (kbps)

t

Recommended bit rate & reference sam-

pling frequency: 96,128, 192 kbps fixed bit

rate /44.1KHz

t

ID3 tag

This device supports ID3v1.0, ID3v1.1,

ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.

t

Supported media

t The MP3 media supported by the device

are CD-ROM and USB.

2-20 AUDIO SYSTEM

t

Supported media formats

t This device supports ISO9660 LEVEL1 and

LEVEL2. Detailed specification is as below.

t

Maximum directory layers: 8 layers

Maximum folder length: 64 Bytes, file name

t

length: 64 Bytes

t

Supported characters for folder name/ file

name: Alphanumeric characters, Korean

standard character set 2350 characters,

Simplified Chinese 4888 characters

t

Maximum number of folders which can be

stored onto one disc: 256 folders (including

ROOT directory)

t

Maximum number of files which can be

stored onto one disc: 512 files

t

Precautions upon burning MP3 files

The use of ISO 9660 LEVEL 2 JULIET format

t

is recommended when burning MP3 files.

Burning in other formats may abnormally

display the file names.

t

It is possible to display up to 32 characters for

file and folder names in case of UNICODE, and

up to 64 characters in case of ASCII.

t Although the full length of the file name can

be displayed by using the scroll function, the

full length of folder names may not be dis-

played as the scroll function does not operate

when displaying folder names.

●

Precaution

Please use an MP3 bit rate which is less than

128 kbps.

The sound quality cannot be guaranteed for

MP3s exceeding 128kbps.

Listening to MP3 music

5DQGRP

1. Insert the MP3 disc or press the

0(',$

key on the control panel if the MP3 disc is

already inserted.

2. Select the desired file.

[Selecting the MP3 file], page 2-21.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"DISC"

"CD"

"MP3"

MP3 screen and functions

d e

i jh

Mode display: Displays that the current

mode is MP3 disc mode. (MP3 files on

DVDs are not supported.)

REPEAT/RANDOM/SCAN indicator: If

REPEAT/RANDOM/SCAN is operating, the

switch is displayed.

Play file position : Current playing file /

total files

Play time: Displays the play time.

Folder name: Displays the folder name.

File name: Displays the file name.

button: Plays or pauses the cur-

rent file.

button : REW or FF.

[REW/FF MP3 file], page 2-22.

button : Previous or next

[Selecting the MP3 file], page 2-21.

track.

button : Plays all files on the disc

or folder in random order.

[Setting Random function for MP3 file] ,

Operating the CDP

page 2-22.

5HSHDW

button : Repeats the current

playing folder or file.

[Setting Repeat function for MP3 file],

page 2-23.

6FDQ

button : Scans all files on the disc

or folder for 10 seconds each.

[Scanning MP3 file], page 2-23.

/LVW

button : Displays the MP3 folders

and file lists for the disc.

[Selecting the MP3 file], page 2-21.

,QIR

button : Displays or hides the

detailed file information for the current

playing file.

[Browsing detailed information about

the MP3 file], page 2-22.

AUDIO SYSTEM 2-21

PART 2 AUDIO SYSTEM

6RXQG

button : Adjusts the FAD/BAL,

BASS/MID/TREB controls.

[Audio sound setting], page 1-11.

Selecting the MP3 file

There are 3 ways to select an MP3 file - (a)

selecting through file up/down, (b) selecting

through searching files, (c) selecting through

MP3 list.

(a) Selecting through File Up / Down

Press the

control panel or the

steering wheel remote controller or the

second.

The next or previous file will begin playing.

If the

controller

pressed shortly while the file has played for

more than 3 seconds, the start of the current

file will begin playing.

2-22 AUDIO SYSTEM

75$&.

6((.

keys on the



or  keys on the

buttons on the screen for less than 0.8

INFORMATION

6((.

key on the control panel or the

key

on the steering wheel remote

the

button on the screen is

If the file has been playing for less than 2

seconds, the start of the previous file will

begin playing.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Next File"

"Previous File"

"Next Folder"

"Previous Folder"

(b) Selecting through search

1. Turn the

781(

knob on the control panel

in clockwise or counter-clockwise direction.

Each click on the

781(

knob will display

the information of the next or previous file.

The current playing file will continue to be

played.

INFORMATION

If the operation of the

rapid, there may be a delay in displaying the

file information.

781(

knob is too

781(

2. Press the

knob at the desired file. The

searched file will begin playing.

1. Press the

/LVW

button.

The file list of the folder for the current

playing file will be displayed.

INFORMATION

●

If many songs and folders are recorded onto

a DISC, file loading time may be longer and

cause the play list to be improperly displayed

or song search through TUNE operation to

operate improperly.

In such cases, wait until file loading is com-

plete and try again.

●

Within the MP3 list screen, if the

1RZSOD\LQJ

ching for files within a folder or a page, the

current playing file list will become dis-

played.

button is pressed while sear-

2. Press the desired menu to return to the

5DQGRP

main screen and play the selected file.

REW/FF MP3 file

Press and hold the

the control panel or the

6((.

75$&.



or  keys on

keys on

the steering wheel remote controller or the

or buttons for over 0.8 second.

The file will play 20 times faster while holding

the button and return to normal play when

the button is released.

Browsing detailed information about

the MP3 file

1. Press the

,QIR

button.

The detailed information (Title, Album,

Artist) for the current playing MP3 will be

displayed.

2. Press the

button.

The detailed information will be turned off.

Setting Random function for MP3 file

Press the

●

RANDOM (less than 0.8 second) : Plays all

button.

files in the disc in random order

●

FOLDER RANDOM (over 0.8 second) : Plays

the files in the current folder in random

order.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Random"

"Random Folder"

Say "Normal Play" in order to terminate the

set Random function.

3. Press the

listening to the current file.

The random selection will be terminated

and the current file will continue to play.

button again to continue

AUDIO SYSTEM 2-23

Operating the CDP

PART 2 AUDIO SYSTEM

Setting Repeat function for MP3 file

1. Press the

●

1. Press the #key on the steering wheel

2. After the beep sound, say a command.

2. Press the

2-24 AUDIO SYSTEM

5HSHDW

button.

REPEAT (less than 0.8 second) : Repeats the

current playing file

FOLDER REPEAT (over 0.8 second) : Repeats

the files in the current folder

Voice Command

remote controller.

"Repeat File"

"Repeat Folder"

Say "Normal Play" in order to terminate the

set Repeat function.

5HSHDW

repeating the current file.

The repeat selection will be terminated and

the current file will continue to play once

until the next file starts to play.

button again to stop

Scanning MP3 file

1. Press the

●

6FDQ

button.

SCAN (less than 0.8 second) : Scans all files

in the disc and plays for 10 seconds each.

●

FOLDER SCAN (over 0.8 second) : Scans all

files in the current folder for 10 seconds

each.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Scan"

"Folder Scan"

Say "Normal Play" in order to terminate the

set Scan function.

6FDQ

2. Press the

listening to the file.

The scan selection will be terminated and

the current file will continue to play.

button again to continue

INFORMATION

When scanning has completed an entire revo-

lution, the scan function is automatically ter-

minated and the previous played file will be

restored.

Operating the external devices

MP3

iPod® is a registered trademark of Apple Inc.

Connecting iPod devices

Connect the iPod device as shown in the pic-

ture.

The Kia iPod Power cable is needed in order to

operate iPod with the audio buttons on the

audio system. The USB cable provided by

Apple may cause malfunction and should not

be used for Kia vehicles.

The Kia iPod Power cable maybe purchased

through your Kia dealership.

●

Unsupported iPod devices : iPod genera-

tions before iPod 3G, iPod Shuffle, and iPad.

CAUTION!

Some functions may not operate properly

depending on the firmware version in some

iPod or iPhone devices.

INFORMATION

In order to prevent such malfunction, check

the following before connecting your iPod or

iPhone device with the Kia iPod Cable.

●

If the battery has been completed dischar-

ged, charge the device for at least 10 minutes

before connecting.

●

Turn on the device before connecting.

●

If the device is set to lock, release the lock

before connecting.

●

For iPhones, audio will not play if the audio

system and BT are paired. Disconnect the

pairing before connecting.

When there are no songs in the iPod or

iPhone or if there is no response from the

device after connecting with the Kia Cable, a

“No Media Connected” pop-up message will

be displayed for 5 seconds and the previous

mode will automatically be restored.

In such cases, disconnect the iPod or iPhone

and try connecting again.

If the message continues even after reconnec-

ting the iPod, check to see if there are any pro-

blems with the iPod device.

CAUTION!

If a playing iPod is connected to the audio sys-

tem, a high-pitched tone may occur for

approximately 1-2 seconds.

Please turn the iPod device to pause/stop

prior to connecting it to the vehicle.

AUDIO SYSTEM 2-25

Operating the external devices

PART 2 AUDIO SYSTEM

Listening to music from iPod

1. Connect the iPod or press the

on the control panel if the iPod is already

connected.

INFORMATION

Even if the iPod is connected, the 'No Media

Connected' message may be displayed if an

error has occurred. In such a case, reconnect

the iPod.

Voice Command

1. Press the key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"iPod"

2-26 AUDIO SYSTEM

0(',$

key

iPod screen and functions

d e

h i j

Mode display: displays that the current

f g

mode is iPod mode.

RANDOM/REPEAT indicator: if RANDOM/

REPEAT is operating, the switch is dis-

played.

Play file position: current playing file / total

files

Play time: displays the play time.

Category name: displays the category

name of the playing file.

Title name: displays the title name of the

playing file.

button: plays or pauses the cur-

rent file.

c button : REW or FF.

[REW/FF iPod song], page 2-27.

e button : previous or next file.

[Selcting an iPod song], page 2-25.

5DQGRP

button : plays all songs in the

current playing list in random order or ran-

domly in album unit.

[Setting random function for iPod

song], page 2-26.

5HSHDW

buttons : repeats the current

playing song.

[Setting repeat function for iPod song],

page 2-27.

,QIR

button : converts to the search

menu screen.

[

Viewing detailed information for iPod

song], page 2-27.

0HQX

button : converts to the search

menu screen.

[Selecting an iPod song], page 2-25.

6RXQG

button : adjusts the FAD/BAL,

BASS/MID/TREB controls.

[Audio Sound setting], page 1-10.

Selecting music from iPod

5DQGRP

There are 3 ways to select songs from the iPod

device - (a) selecting song through Up/Down,

(b) selecting song through sequential search,

(a) Selecting song through Up / Down

Press the

control panel or the

6((.

75$&.

keys on the



or  keys on the

steering wheel remote controller or the

buttons on the screen for less than 0.8

second. The next or previous song will begin

playing.

INFORMATION

75$&.

If the

6((.

controller or the

pressed shortly while the song is playing for

more than 3 seconds, the start of the current

song will begin playing. If the song has been

playing for less than 2 seconds, the start of the

previous song will begin playing.

key the control panel or the

䑰

key on the steering wheel remote

䑰

button on the screen is

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Next Song"

"Previous Song"

(b) Selecting song through search

1. Turn the

781(

knob on the control panel

in clockwise or counter-clockwise direction.

Each click on the

781(

knob will display

the information of the next or previous

song. The current playing song will conti-

nue to be played.

INFORMATION

If the operation of the

rapid, there may be a delay in displaying the

song information.

2. Press the

781(

The searched song will begin playing.

781(

knob is too

knob at the desired song.

1. Press the

0HQX

button.

The iPod menu screen will be displayed.

2. Press the button for the desired search

method.

INFORMATION

If the search mode is accessed while playing a

song, the most recent searched step will be

displayed.

The search steps upon initial connection are

listed below.

AUDIO SYSTEM 2-27

Operating the external devices

PART 2 AUDIO SYSTEM

1 Step 2 Step 3 Step 4 Step

Playlist Playlist Song

Genre Genre Artist Album Song

Artist Artist Album Song

Composer composer Album Song

Album Album Song

Audiobooks Song

Songs Song

Podcasts Program Episode

REW/FF iPod music

Press and hold the

the control panel or the

the steering wheel remote controller or the

or buttons for over 0.8 second.

The song will play 20 times faster while hol-

ding the button and return to normal play

3. Press the desired song button to return to

the main screen and play the selected song.

2-28 AUDIO SYSTEM

when the button is released.

6((.

75$&.



or  keys on

keys on

Setting Random function for iPod music

Press the

button. Each press will

change the function in the following order :



Random

Album Random  Random Off 

Random...

●

Album Random : plays the song in the cur-

rent play list randomly in album units.

However, songs within the same album will

be played sequentially.

e.g.) Album1(Music1  Music2  Music3 



...

Music10)  Album5 ( Music1  Music2)



Album4 (Music1  Music2  Music3) ...

●

RANDOM : Plays all files in the current play

list in (All Songs, certain albums, or user

designated iPod Playists) randomly

regardless of album.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Random"

"Random Album"

Say "Normal Play" in order to terminate the

set Random.

Setting Repeat function for iPod music

1. Press the

5HSHDW

button.

Each press will change the function in the fol-

lowing order: REPEAT



REPEAT OFF 

REPEAT

●

REPEAT : Repeats the current playing song.

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Repeat Song"

Say "Normal Play" in order to terminate the

set Repeat function.

Browsing detailed information about the

iPod music

1. Press the

,QIR

button.

The detailed information (Title, Album and

Artist) for the current channel will be dis-

played.

2. Press the

button.

The detailed information will be turned off.

Operating the external devices

AUDIO SYSTEM 2-29

PART 2 AUDIO SYSTEM

USB MP3

USB MP3 related information and

precaution

●

Information

t

The MP3 file standards supported by the

device are as follows.

t Acceptable standard: MPEG1 AUDIO LAYER 3.

t Acceptable sampling frequency: 32, 44.1,

48 (kHz)

t

Acceptable bit rate : 32, 40, 48, 56, 64, 80,

96, 112, 128, 160, 192, 224, 256, 320 (kbps)

t

Recommended bit rate & reference sam-

pling frequency: 96,128, 192 kbps fixed bit

rate /44.1kHz

t

ID3 tag

This device supports ID3v1.0, ID3v1.1,

ID3v2.2, ID3v2.3, and ID3v2.4 ID3 tags.

t

Supported media

The MP3 media supported by the device

are CD-ROM and USB.

t

Supported media formats

This device supports ISO9660 LEVEL1 and

LEVEL2. Detailed specification is as below.

2-30 AUDIO SYSTEM

t

Maximum director y layers: 20 layers

t Maximum length of folder name/file name:

250Bytes

t

Supported characters for folder name/ file

name: Alphanumeric characters, Korean

standard character set 2350 characters,

Simplified Chinese 4888 characters

t

Maximum number of folders which can be

stored onto one USB: 2000 folders (inclu-

ding ROOT directory)

t

Maximum number of files which can be

stored onto one USB: 6000 files

t

Precautions upon formatting USB & down-

loading MP3 files

t

The device only supports FAT type USB file

system. The device will not play USB media

content if the USB is NTFS type.

●

Precaution

Please use an MP3 bit rate which is less than

192kbps and a fixed bit rate.

The sound quality cannot be guaranteed for

MP3s exceeding 192Kbps and operation of

specific functions (limited to FF/REW func-

tions) may be abnormal with variable bit rates.

Precautions upon handling USB

●

When using the external USB device, make

sure to keep the device disconnected and

connect only some time after turning on the

vehicle ignition. The USB device may be

damaged if the USB device already connec-

ted when the ignition is turned on. (USB

device is not an electronic automotive com-

ponent)

●

The external USB device may not operate if

the USB device already connected when

vehicle ignition is turned on or off.

●

The device will not operate when playing a

format which is not MP3 or WMA file for-

mats.

1. Only MP3 files with compression rates

between 8kbps~320kbps are supported.

2. Only WMA files with compression rates

between 8kbps~320kbps are supported.

●

Be cautious of static electricity when

connecting/disconnecting the external USB

device.

●

Encoded MP3 Players will not be recognized

when connected as the external device.

●

When connecting an external USB device,

the device may not properly recognize the

USB when the USB is in some states.

●

When formatting the external USB device,

the device may not properly be properly

recognize a Byte/Sector selection other

than 512Byte or 2048Byte.

●

The device will only recognize USB devices

formatted in FAT 12/16/32.

●

Some USB devices may not operate properly

because of compatibility issues. Verify that

the external device is supported by the

device before starting use.

●

Avoid contact between the USB connector

with bodily parts and foreign substances.

●

Repeatedly connecting/disconnecting the

USB in a short period of time may cause

damage to the device.

●

When disconnecting the USB, an abnormal

sound may occur occasionally.

●

Abruptly disconnecting the external USB

device while the USB is operating may

cause the device to be damaged or function

abnormally.

Make sure to disconnect the USB device

only after the audio power is turned off or

when the audio is operating in a different

mode.

●

The amount of time required to recognize

the external USB device may differ depen-

ding on the type, size, or file formats stored

on the USB.

Such differences in the required time are

not indications of malfunction.

Please wait for the required period of time

to recognize the device.

●

The device supports only USB devices used

to play music files.

●

Do not use the USB I/F to charge batteries

or USB accessories which generate heat.

Such acts may lead to deteriorated perfor-

mance or damage to the device.

●

The device may not recognize the USB

device if separately purchased USB hubs

and extension cables are being used.

Connect the USB directly to the multimedia

terminal of the vehicle.

●

In the case of high capacity USB devices,

there are instances where the logical drives

are partitioned for user convenience.

In this case, only the USB music in the top-

level logical drive will be possible to play.

When using partitioned drives, save the

desired songs to play on the device only in

the top-level logical drive.

In addition, certain USB devices are confi-

gured with a separate drive used to install

application programs and songs from such

drives may not be possible to play for the

reasons as described above.

●

The device may not support normal opera-

tion if MP3 Players, cellular phones, digital

cameras, or other electronic devices (USB

devices not recognized as portable disk

drives) are connected to the device.

AUDIO SYSTEM 2-31

Operating the external devices

PART 2 AUDIO SYSTEM

●

The device may not support normal opera-

tion when using a USB memory type

besides the Metal Cover Type USB Memory.

●

The device may not support normal opera-

tion when using formats such as HDD Type,

CF, or SD Memory.

●

The device will not support files locked by

DRM (Digital Rights Management).

●

The device may not support. Please make

sure to use normal operation if the proper

connection with the USB memory fails due

to vibrations caused by the vehicle. (i-stick

type, etc.)

●

Please avoid using USB memory products

which can be used as key chains or cellu-

lar phone accessories as they could cause

damage to the USB jack.

2-32 AUDIO SYSTEM

Please make certain only to use plug type

connector products as shown below.

Plug Type Connector

Connecting the USB devices

Connect the USB as shown in the picture.

㾐㾐㾐㾐

Listening to USB music

1. Connect a USB or press the

0(',$

key on

the control panel if the USB is already

connected.

2. Select the desired file.

[Selecting the MP3 file], page 2-21.

INFORMATION

The USB screen and operation method is the

same with MP3 mode.

Please refer to the MP3 mode section for more

information.

Voice Command

7LPHU

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"USB"

Starting USB IMAGE Mode

1. The USB mode will automatically start

when the USB is inserted. When in a

different mode, repeatedly press the

0(',$

key to convert to USB mode.

(Each press will change in order of AUX



DISC

USB)



2. The image will be displayed on the screen.

INFORMATION

0XVLF

Press the

side to enter either mode. (Supported only

when compatible files exist within the USB)

button on the bottom left

USB IMAGE mode menu screen

configuration

6 8

9 10 11

Mode display : display that the current

mode is <USB Image> mode.

Folder name : displays the name of the fol-

der where photo files are located.

File name : displays the file name of the

current photo.

File index : displays the number of Image

files within the USB (current file / all files)

Slide Show Interval : displays intervals of 5,

10, and 20 seconds.

button : displays the previous photo.

Slide Show View : displays photos in inter-

vals of 5, 10, and 20 seconds.

12 13

AUDIO SYSTEM 2-33

Operating the external devices

PART 2 AUDIO SYSTEM

button : displays the next photo.

USB music(MP3) mode

converts to <USB Music> mode.

/LVW

button : displays the <Image List>

screen.

+LGH

button : hides the button display.

6DYH

button : upon turning off power,

saves the current image as the frame

screen image.

button : allows changes to slide

7LPHU

show interval.

2-34 AUDIO SYSTEM

0XVLF

button :

Operating USB IMAGE Mode

(a) Moving to next IMAGE

1. Press the screen.

2. Within the Image screen, press the

button to flip through each file.

(b) Displaying USB IMAGE Slideshow

Interval

1. Repeatedly press the

bottom to change the slideshow interval

(converts in time intervals of 5 seconds



10 seconds

20 seconds  5 seconds).

1. Press the

6DYH

the <Image> screen. The currently dis-

played image will be registered as the

frame.

button at the

button at the bottom of

INFORMATION

For details on setting up the frame, refer to

the frame setup page within Screen setup.

Restrictions while driving-Image Play related

buttons cannot be used while the vehicle is in

motion.

There are five buttons such as <

3OD\,FRQ

6DYH

+LGH



/ Ԣ /

AUX

External Audio Device

Connecting AUX

Connect the external Audio player as shown

in the picture.

Playing AUX

AUX screen

Operating the external devices

INFORMATION

Connect only by using AUX terminals.

Connect an AUX or press the

the control panel if the AUX is already connec-

ted.

0(',$

key on

Voice Command

1. Press the #key on the steering wheel

remote controller.

2. After the beep sound, say a command.

"Line In"

Audio AUX screen

AUDIO SYSTEM 2-35

PART 3 NAVIGATION SYSTEM

PART 3

NAVIGATION SYSTEM

Limitations of the navigation system

……………………………… 3-2

GPS signal reception state ………………3-2

Vehicle position display

Route Guidance

Route Re-calculation

Starting navigation system

…………………3-3

…………………………3-4

……………………3-4

……………3-5

Map Functions ……………………… 3-5

Current position map screen

(without route)

Switching map mode

(North Up / Heading Up)

Viewing GPS signal state

Changing the map scale

Displaying / Hiding POI icons on the

map

Displaying/Hiding Q.POI icons ……… 3-9

Displaying / Hiding icons other than

Q.POI icons

Making a call to POI ………………… 3-10

Scrolling map

…………………………3-5

………………3-6

………………3-7

………………3-8

………………………………………3-9

…………………………… 3-9

………………………… 3-11

Setting a destination ……………… 3-12

Destination menu screen and functions

Searching a Destination

Operating after searching a destination

Operating after setting a destination … 3-28

Starting Route Guideance …………… 3-28

Route guidance screen

Selecting other route

… 3-12

Searching an Address………………… 3-13

Searching a Previous Destination

Searching an Intersection

Searching a POI

Searching from Address book

Searching for Emergency facilities

Searching your Home

Searching favorite places

Searching from MAP

Searching POI by local POI list

Changing destination position

Setting as Destination / waypoint

Adding to address book

……………… 3-13

…… 3-17

…………… 3-17

……………………… 3-20

……… 3-24

… 3-25

……………… 3-25

…………… 3-26

………………… 3-26

……… 3-26

… 3-27

……… 3-27

…… 3-27

…………… 3-27

……………… 3-28

………………… 3-29

Route guidance ……………………… 3-30

Route menu screen and functions …… 3-30

Finishing route guidance

(Delete Destination) ………………… 3-30

Route overview (View Entire Route)

Changing Route option

Editing waypoints

Deleting waypoints ………………… 3-34

Re-ordering waypoints

Setting detour distance ……………… 3-35

Setting avoid streets on route

…………………… 3-32

… 3-31

……………… 3-32

……………… 3-34

……… 3-35

Setup and Information …………… 3-36

Setup menu screen and functions …… 3-36

Main setting

………………………… 3-37

Setting keyboard for inputting letter … 3-37

Setting voice command feedback

ON/OFF

……………………………… 3-37

Setting Language

System information and update

Initializing system

Navigation setting …………………… 3-38

…………………… 3-37

…… 3-37

…………………… 3-37

PART 3

NAVIGATION SYSTEM

Setting units (mile / km) …………… 3-38

Setting arrival time and distance

display

………………………………… 3-38

Registering avoid area

Editing avoid area

Deleting avoid area

Deleting all avoid areas

Setting Q.POI icons

Setting estimate travel time

My places setting …………………… 3-43

Registering new address in

address book

Editing an address of address book

Deleting an address of address book

Deleting an address book

Registering home address

Deleting home address

Registering favorite place

Deleting favorite place

Voice guidance volume setting ……… 3-51

Voice guidance volume control ……… 3-51

Adaptive volume control ON/OFF

……………… 3-38

…………………… 3-40

………………… 3-41

……………… 3-41

…………………… 3-42

………… 3-42

………………………… 3-43

… 3-45

3-46

…………… 3-47

…………… 3-48

……………… 3-48

…………… 3-49

……………… 3-50

…… 3-52

Traffic Setup ………………………… 3-52

Traffic Information

Help

…………………………………… 3-54

…………………… 3-52

NAVIGATION SYSTEM

NAVIGATION SYSTEM 3-1

PART 3 NAVIGATION SYSTEM

Limitations of the navigation system

GPS signal reception state

●

As the GPS satellite frequency is received /

transmitted in straight lines, reception may

not work if devices are placed on or near

the GPS antenna or when traveling through

the following locations.

Tunnels

Basement parking structures

3-2 NAVIGATION SYSTEM

Underneath an overpass

Roads within forested areas

Areas near high rise buildings

Roads within canyons

Vehicle position display

●

If multipass errors occur due to reflections

from buildings or related causes, the current

position mark on the navigation may differ

from the actual position of the vehicle.

●

The position of the vehicle on the naviga-

tion may be different from the actual posi-

tion if the vehicle is under the following

conditions. If such differences occur, driving

for a short period of time will automatically

correct the position of the vehicle through

map matching or GPS information (several

minutes may be necessary in certain cases).

t

When driving on a Y-shaped road with a

narrow angle, the current position may be

displayed in the opposite direction.

If the vehicle is loaded onto a ferry or a car

transport vehicle, the current position mark

may be stalled on the last position prior to

When driving on a spiral-shaped road.

When driving in mountain regions with

sharp turns or sudden brakes.

When entering a road after having been in

an underground parking structure, building

parking structure, or turntable with many

rotations.

When the tires have recently been replaced

(Especially upon use of spare or studless

tires)

If the battery terminal is removed.

When driving in city streets, the current

position may be displayed on the opposite

side or on an off-road position.

When changing the zoom level from the

maximum zoom in level to a different zoom

level, the current position mark may be dis-

played on a different road.

When driving in heavy traffic with frequent

go·stops in traffic or intersections.

When driving under slippery conditions,

such as heavy sand, snow, etc.

When driving with the tire chain in place.

When using a tire with an incorrect size

specification.

When the tire pressure for the 4 tires are dif-

ferent.

When the replacement tire is a worn or

used tire (Especially studless tires having

passed a 2nd seasons, etc.)

When driving near high-rise buildings

If a roof carrier has been installed

When driving under high speeds or having

calculated a long-distance route.

NAVIGATION SYSTEM 3-3

NAVIGATION SYSTEM

PART 3 NAVIGATION SYSTEM

Route Guidance

●

Suitable route guidance may not occur

caused by search conditions or the driving

position.

t

Guidance to go straight may be given while

driving on a straight road.

t

Guidance may not be given even when hav-

ing turned at an intersection.

t

There are certain intersections in which

guidance may not occur.

t

A route guidance signaling for a U-Turn in a

No U-Turn location may occur.

t

A route guidance signaling entrance into a

no enter zone may occur (No enter zone,

road under construction, etc.).

t

Guidance may be given to a position

removed from the actual destination if

roads to reach the actual destination do not

exist or are too narrow.

3-4 NAVIGATION SYSTEM

t

Faulty voice guidance may be given if the

vehicle breaks from the designated route

(ex: if a turn is made at an intersection while

the navigation provided guidance to go

straight).

Map Data may be missing or incorrect caus-

ing route guidance to not be given.

Route Re-calculation

●

The following phenomena may occur after

conducting route recalculation.

t

Guidance may be given to a position differ-

ing from the current position when turning

at an intersection.

t

Route Recalculation may take a longer peri-

od of time when driving under high speeds.

t

A route guidance signaling for a U-Turn in a

No U-Turn location may occur.

t

A route guidance signaling entrance into a no

enter zone may occur (No enter zone, road

under construction, etc).

t

Guidance may be given to a position

removed from the actual destination if

roads to reach the actual destination do not

exist or are too narrow.

t

Faulty voice guidance may be given if the

vehicle breaks from the designated route

(ex: if a turn is made at an intersection while

the navigation provided guidance to go

straight)

+ 67 hidden pages