HYUNDAI MOBIS ADC40A9AN, ADBB0A9AN User Manual

Download

CAR MULTIMEDIA SYSTEM

USER'S MANUAL

Read the following safety precautions for your safety

Notations used within this User's Manual

Before using the product, read the contents of this user's manual

carefully and use this product safely.

※

The design and speciﬁ cations of this product may change without prior

notiﬁ cation for product and service improvement.

The actual features in the vehicle may differ from the illustrations.

For more accurate information about the vehicle, please refer to the

catalogue.

※

This Audio system contains open source software, including without

limitation, software distributed and/or modiﬁ ed under the GNU General

Public license, Version 2, June 1991, and the GNU lesser General Public

License, Version 2.1, February 1999.

For additional information and to obtain related materials including

without limitation, the previous referred to licenses and software, please

WARNING

• Failure to observe the instructions within this category could result in death

or serious injury or damage to the vehicle.

CAUTION

• Information on matters that could potentially lead to injury or vehicle

damage/malfunction Information that could lead to higher user safety

Information

• Information and tips that provide additional user convenience in using the

product

NOTICE

• Information on specific features that facilitate proper product use and

functional understanding

• Information on terminology used within this manual

K_UMa_UVO3[USA_EU]AV_PART0.indd 1K_UMa_UVO3[USA_EU]AV_PART0.indd 1 2016-01-27 오후 4:22:522016-01-27 오후 4:22:5

iPod

iPod® is a registered trademark of Apple Inc.

Bluetooth®

Wireless Technology

A compatible Bluetooth® Wireless Technology-enabled cell phone is

required to use Bluetooth

The Bluetooth

word mark and logos are registered trademarks owned

Wireless Technology.

by Bluetooth SIG, Inc. and any use of such marks by Kia is under license.

Other trademarks and trade names are those of their respective owners.

A Bluetooth

enabled cell phone is required to use Bluetooth® Wireless

Technology.

A Bluetooth

Bluetooth

Wireless Technology enabled cell phone is required to use

Wireless Technology. Bluetooth® Wireless Technology phone

compatibility can be checked by visiting http://www.kia.com.

HD Radio™ Technology

HD Radio™ Technology manufactured under license from iBiquity Digital

Corporation. U.S. and Foreign Patents.

HD Radio™ and the HD, HD Radio, and "Arc" logos are proprietary

trademarks of iBiquity Digital Corp.

Pandora

Pandora, the Pandora logo, and the Pandora trade dress are trademarks

or registered trademarks of Pandora Media, Inc. Used with permission.

Pandora is only available in certain countries. Please visit http://www.

pandora.com/legal for more information.

Wi-Fi

The Wi-Fi CERTIFIED™ Logo is a certiﬁ cation mark of Wi-Fi Alliance.

K_UMa_UVO3[USA_EU]AV_PART0.indd 6K_UMa_UVO3[USA_EU]AV_PART0.indd 6 2016-01-27 오후 4:22:542016-01-27 오후 4:22:5

part.1

Component Names and Functions

Starting the System for the First Time

Basic

Warnings and Cautions

Key Product Features

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-1K_UMa_UVO3[USA_EU]AV_PART1.indd 1-1 2016-01-27 오후 4:23:052016-01-27 오후 4:23:0

Basic

Safety Warnings

• Do not stare at the screen while driving. Staring at the screen for prolonged periods of time could lead to traffic accidents.

• Do not disassemble, assemble, or modify the Multimedia system. Such acts could result in accidents, fire, or electric shock.

• Heed caution not to spill water or introduce foreign objects into the device. Such acts could lead to smoke, fire, or product malfunction.

• If you use phone related functions while driving, you will find it difficult to concentrate on operating the vehicle and the current traffic conditions, so the possibility of an accident may increase. Please use phone related functions only when parked.

• Please refrain from use if the screen is blank or no sound can be heard as these signs may indicate product malfunction. Continued use in such conditions could lead to accidents (fires, electric shock) or product malfunctions.

• Do not touch the antenna during thunder or lightening as such acts may lead to lightning induced electric shock.

• Do not stop or park in parking-restricted areas to operate the product. Such acts could lead to traffic accidents.

• For most Audio and multimedia modes, the display will not operate when the vehicle is in motion. For your safety, first park the vehicle to watch or view the screen.(The screen will only operate when the parking brake is ON for manual transmission vehicles and when the parking brake is ON or the gearshift is in the P (PARK) position for automatic.)

• Some functions other than the one mentioned above cannot be used while driving. These functions operate only when the vehicle is parked.

1-2 I Basic

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-2K_UMa_UVO3[USA_EU]AV_PART1.indd 1-2 2016-01-27 오후 4:23:052016-01-27 오후 4:23:0

Safety Cautions

Pay attention to traffic conditions while driving.

• Operating the device while driving could lead to accidents due to a lack of attention to external surroundings. First park the vehicle before operating the device. In addition, the touch screen may not work for some functions when the vehicle is in motion. The touch screen feature will be supported once the vehicle has stopped.

• Adjust the volume to levels that allow the driver to hear sounds from outside of the vehicle. Driving in a state where external sounds cannot be heard may lead to accidents.

• Pay attention to the volume setting when turning the device on. A sudden output of extreme volume upon turning the device on could lead to hearing impairment. (Adjust the volume to a suitable levels before turning off the device.)

• If you want to change the position of device installation, please inquire with your place of purchase or service maintenance center. Technical expertise is required to install or disassemble the device.

• Turn on the car ignition before using this device. Do not operate the Multimedia system for long periods of time with the ignition turned off as such operations may lead to battery discharge.

• Upon using the Multimedia system for more than 10 minutes with the car engine turned off, the following warning will be displayed. After 10 minutes, the warning will be displayed for 5 seconds every 1 minute.

• Do not subject the device to severe shock or impact. Direct pressure onto the front side of the monitor may cause damage to the LCD or touch screen.

• When cleaning the device, make sure to turn off the device and use a dry and smooth cloth. Never use tough materials, chemical cloths, or solvents(alcohol, benzene, thinners, etc.) as such materials may damage the device panel or cause color/quality deterioration. When experiencing product concerns, inquire with your place of purchase or service maintenance center.

• Prevent caustic solutions such as perfume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration.

Warnings and Cautions I 1-3

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-3K_UMa_UVO3[USA_EU]AV_PART1.indd 1-3 2016-01-27 오후 4:23:062016-01-27 오후 4:23:0

Key Product Features

This device is a Multimedia system equipped with a multifunctional disc player that supports Radio (FM, AM), HD Radio™ Technology (if equipped), SiriusXM™, Audio CD, MP3, USB, iPod, AUX, Bluetooth Audio and My Music features. The WIDE VGA LCD provides a high quality resolution while the powerful and rich sound system adds to the driving enjoyment.

Wide TFT-LCD Display

Display

Radio

Multimedia

Player

• Provides high quality video through a Wide TFTLCD Display using an LED Back Light.

• Touch screen for maximum user convenience.

Digital Tuner Feature

• Digital Tuner using PLL method that supports memory of 40 broadcast stations.

Radio broadcast station name

• Displays broadcast station names.

HD Radio™(if equipped)/Satellite Radio feature

• Supports HD Radio™(if equipped) reception and Satellite Radio (SiriusXM™).

Support for various Media Formats

• Support for various media formats, including Radio, Audio CD, MP3, USB, iPod, AUX and Bluetooth

Audio Streaming modes

My Music

• Supports copying of music stored within USB devices into My Music (internal memory) mode

Miscellaneous

Bluetooth

• Convenient use of Bluetooth

Wireless Technology

Handsfree by

using buttons within the steering wheel control

Digital Screen Control Features

• Easy control of features through touch screen options

Steering Wheel Control

• Control over audio features, voice recognition and Bluetooth

through the steering wheel

control for maximum convenience

1-4 I Basic

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-4K_UMa_UVO3[USA_EU]AV_PART1.indd 1-4 2016-01-27 오후 4:23:062016-01-27 오후 4:23:0

Component Names and Functions

Head Unit

Name Description

Press to insert or eject disc

RADIO

MEDIA

SEEK

TRACK

PWR/

VOL

Selects FM/AM/SiriusXM™ mode

• Each time this is pressed, the mode is changed in the following order: FM → AM → SiriusXM™ → FM.

Selects MEDIA mode.

• If the media is not connected MEDIA mode will not be activated.

When pressed quickly (less than 0.8 seconds),

• FM/AM mode: Plays the previous/next frequency.

• SiriusXM™ mode: Changes the channel.

• MEDIA (Disc/USB/iPod/My Music) mode: Changes the track, file or title (except for USB Image and AUX).

When pressed and held down (more than 0.8 seconds),

• FM/AM mode: Continuously changes the frequency until the key is released.

• MEDIA (Disc/USB/iPod/My Music) mode: Rewinds or fast forwards the track or file (except for USB Image, Bluetooth Audio, and AUX).

• When power is off, press to turn power on.

• When power is on, press and hold (more than 0.8 seconds) to turn the power off.

• When power is on, press quickly (less than 0.8 seconds) to turn Audio off.

• Turn left/right to adjust the volume.

Name Description

DISP

APPS/

PHONE

UVO

SETUP

Turns the screen on/off.

Moves to the Apps/Info screen.

Displays the Bluetooth phone mode.

Displays the UVO mode

Moves to the Setup screen.

• FM/AM mode: Changes the frequency.

• SiriusXM™ mode: Changes the channel.

TUNE

• MEDIA (Disc/USB/iPod/My Music) mode: Changes the track, file or title (except USB Image, Bluetooth Audio, and AUX).

RESET

※

The actual feature in the vehicle may differ from the illustration.

Resets the system settings. (Preset radio channels and other data will not be deleted)

Component Names and Functions I 1-5

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-5K_UMa_UVO3[USA_EU]AV_PART1.indd 1-5 2016-01-27 오후 4:23:062016-01-27 오후 4:23:0

Steering Wheel Controls

Name Description

When pressed quickly (less than 0.8 seconds),

• If Android Auto is not connected, activates the multimedia system voice recognition

• If Android Auto is connected, activates or ends Google voice recognition

When pressed and held (more than 0.8 seconds),

• If the multimedia system voice recognition is activated, ends the multimedia system voice recognition

• If Android Auto is connected, activates or ends Google voice recognition

• If iOS device is connected through Bluetooth, activates or ends Siri Eyes Free

• Each time this is pressed, the mode is changed in the f

ollowing order: FM → AM → SiriusXM → Disc

→

USB or iPod → AUX → Bluetooth Audio → My

Music → Android A

MODE

• If the media is not connected, the corresponding modes will be disab

• Press and hold (more than 0.8 seconds) to turn the Audio system on/off

• When power is off, press button to turn power back on

※

The actual feature in the vehicle may differ from the illustration.

Controls the volume

uto → Pandora → FM

led

Name Description

When pressed quickly (less than 0.8 seconds),

• FM/AM mode: searches broadcast frequencies saved to Presets

• SiriusXM™ mode: searches broadcast channels saved to Presets

• MEDIA (Disc/USB/iPod/My Music) mode: changes the track, file or title (except USB Image, AUX)

When pressed and held (more than 0.8 seconds),

• FM/AM mode: automatically searches broadcast frequencies

• SiriusXM™ mode: automatically searches broadcast channels

• MEDIA (Disc/USB/iPod/My Music) mode: quickly looks up songs (e

xcluding USB images, A

Bluetooth audio files)

When pressed quickly (less than 0.8 seconds),

• When pressed in the dial screen, makes a call

• When pressed in the incoming call screen, answers the call

• When pressed during call waiting, switches to waiting call (Call Waiting)

When pressed and held (more than 0.8 seconds),

• When pressed in Bluetooth the last dialed call

• When pressed during a Bluetooth call, switches call back to mobile phone (Private)

• When pressed while calling on the mobile phone, switches call back to Bluetooth (operates only when Bluetooth connected)

• When pressed during a call, ends the phone call

• When pressed in the incoming call screen, rejects the call

UX and

Hands-free, redials

Hands-free

Hands-free is

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-7K_UMa_UVO3[USA_EU]AV_PART1.indd 1-7 2016-01-27 오후 4:23:132016-01-27 오후 4:23:1

Starting the System for the First Time

Turning the System On/Off

Press the engine start button or set the ignition key to On or ACC. Each time you turn on the system, a boot logo and safety warning will appear.

NOTICE

• You cannot operate the system while it is

booting up. It may take some time for all of features of the system, particularly the voice recognition system, to be ready for use.

Pressing and holding the power key on the head unit will turn off the system. You can change Screen Saver Settings in Setup to display a clock on the Screen Saver.

Information

• If you turn off the system during a phone call

using the Hands-free feature, then the call will automatically switch to your mobile phone.

System Reset

The System Reset function restores the system when it is not operating correctly. Press and hold the ond or longer. (It is recommended that you press the

RESET

a pin or a clip.)

RESET

key for a sec-

key using a tool, such as

Pressing the power key on the head unit will display the safety guide. To change the system language between English, French, Spanish and Korean, select the

Language

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-9K_UMa_UVO3[USA_EU]AV_PART1.indd 1-9 2016-01-27 오후 4:23:152016-01-27 오후 4:23:1

button.

NOTICE

• Check the volume when turning on the

system. Before tur the v

olume to a reasonable level.

ning on the system, adjust

Starting the System for the First Time I 1-9

Battery Warning Message

Always use the system while the car engine is running. If you turn on the system while the engine is off, a battery warning message will appear. When the engine starts, the message will disappear.

Restrictions on Features for Safety Measures

Several features are limited while driving. The restriction screen will disappear when shifting gears into P or putting the parking brake on.

WARNING

- Touching the Antenna During A Thunder Storm

• Do not touch the antenna during thunder or

lightning as such acts may lead to lightning induced electric shock.

NOTICE

• If you use the system for a long time with

the engine off, the battery may become completely discharged.

1-10 I Basic

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-10K_UMa_UVO3[USA_EU]AV_PART1.indd 1-10 2016-01-27 오후 4:23:162016-01-27 오후 4:23:1

WARNING

- Blank Screen

• Refrain from use if the screen is blank or

no sound can be heard as these signs ma indicate product malfunction. Continued use in such conditions could lead to accidents (ﬁ res, electric shock).

Home Screen

Controls Menu Conﬁ guration for the Home Screen

Tap the icon on any screen to display the Home Screen below.

Features Description

Radio/Media

Widget

Connectivity

Widget

All Menus

My Menu

Apps/Info

Setup

• Shows brief information on the radio or media that is now playing.

• Tap the area to move to the mode that you are listening to.

Shows any connected devices such as Android Auto, iPod, Pandora, and Bluetooth.

Shows all of the items in the system menu.

You can add up to eight menus here.

•

• Add your favorite menus to have quick and easy access to them.

Moves to the Apps/Info screen.

Moves to the Setup screen.

Information Display on the Status Bar

Displays the date and time, along with the system status shown by the various icons to the right of the clock. The icons in the following table indicate the various types of system status details and events.

Icon Description

Displayed when the audio is muted.

Displays the remaining battery of the Bluetooth phone.

Displayed when connected to Bluetooth for handsfree.

Displayed when connected to Bluetooth for streaming audio.

Displayed when connected to Bluetooth for streaming audio and handsfree.

Displayed when downloading contacts or recent calls from the Bluetooth phone.

Displayed while on a call with the Bluetooth phone.

Displayed when the microphone of the Bluetooth is muted.

Displays the signal strength of the Bluetooth phone.

Displayed when connected to Wi-Fi.

Displayed when connecting to Wi-Fi.

Displayed when 911 connect is available.

Starting the System for the First Time I 1-11

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-11K_UMa_UVO3[USA_EU]AV_PART1.indd 1-11 2016-01-27 오후 4:23:172016-01-27 오후 4:23:1

Adding Your Favorite Menu Items to My Menu

From the Home screen, select icon, and then

Edit

From the Edit My Menu screen, select menu items from the list on the right, then drag and drop them to a desired place on the left. To remove the item from My Menu, drag item from the left and drop them on the right.

Information

• Up to eight items can be added to My Menu.

My Menu

On-Screen Touch Controls

Learn how to touch the screen to operate the system.

Select

Tap lightly on a menu or an item to select it.

NOTICE

• The system will not recognize your touch if

you wear a glove or other non-conductive material. Touch the screen using your ﬁ nger, an electrostatic touch-screen glove, or a stylus pen.

Drag & Drop

Select a menu or item you want, then drag and drop it to where you want to place it.

Drag or touch the slider along the play bar in the music screens to jump to the point that you want to play from.

Information

• Music screens for Disc CD and Disc MP3 do

not support this function.

1-12 I Basic

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-12K_UMa_UVO3[USA_EU]AV_PART1.indd 1-12 2016-01-27 오후 4:23:182016-01-27 오후 4:23:1

Flick (Quick Scrolling)

Drag the frequency bar to the left or right to move to the frequency that you want.

From the Edit My Menu screen, drag and drop icons to add, delete, or move to/from My Menu.

Quickly moves up and down in the list.

NOTICE

• Moving the list when there are many items will

display a handler on the right of the display. You can easily move many items at a time with the handler

You can view the previous or next image by flicking left/right on an image on the USB Image screen.

Flick left/right on the frequency bar in the radio player to look up the previous/next frequency available.

Starting the System for the First Time I 1-13

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-13K_UMa_UVO3[USA_EU]AV_PART1.indd 1-13 2016-01-27 오후 4:23:182016-01-27 오후 4:23:1

Press and Hold

Pressing the and buttons

in the music player will fast forward/rewind the music.

1-14 I Basic

K_UMa_UVO3[USA_EU]AV_PART1.indd 1-14K_UMa_UVO3[USA_EU]AV_PART1.indd 1-14 2016-01-27 오후 4:23:202016-01-27 오후 4:23:2

part.2

Radio/Media

FM/AM

HD Radio™ Technology

SiriusXM™

About Disc

Disc CD

Disc MP3

USB

iPod

AUX

Bluetooth

Audio

My Music

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-1K_UMa_UVO3[USA_EU]AV_PART2.indd 2-1 2016-01-27 오후 4:23:382016-01-27 오후 4:23:3

Radio/Media

FM/AM

You can access the radio player either by pressing the

key or by selecting the Radio menu from All Menus on the Home screen.

FM/AM Mode Display Controls

Information

• If you press the

adio broadcast will be tuned from the current mode.

and a r

• If you are in radio mode

to access the r

2-2 I Radio/Media

RADIO

adio player.

key when power is off, the power will turn on

, select the media widget from the Home screen

RADIO

Features Description

•

The stored preset frequencies are displaye

or user selection.

Preset

Frequencies

Frequency Bar

Frequency

Tag

Presets

SoundHound

• After selecting frequency, press and hold the preset button for more than 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset b

•

Flick the preset frequencies up/do

kly through presets.

quic

•

Flick the frequency bar left/right to search f

vailable radio channels to the left or r

a the current channel. Dragging: Drag the frequency bar to the left/

• right to find the radio channel that you want.

Displays the current frequency.

Saves the current music’s tag information to the head unit. If connected to iPod, the tag information can be saved on the device.

Shows the stored presets for user selection.

Runs the SoundHound feature. For more details regarding this feature, refer to the SoundHound information in the Info section.

• List

ves to the frequency list.

• Inf

o Turns the Radio text information tr from the broadcasting station on and off

• Preset

• Sound

Scan Plays preset frequencies f item.

Settings Moves to the Sound Settings.

wn to scroll

ansmitted

or 10 seconds per

utton.

ight of

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-2K_UMa_UVO3[USA_EU]AV_PART2.indd 2-2 2016-01-27 오후 4:23:392016-01-27 오후 4:23:3

Features Description

Scan/

Preset Scan

Band

HD Radio

Scan

Displays an active mode from Scan and Preset Scan modes.

Changes to the desired band from among FM, AM, and SiriusXM.

Used to set whether to turn HD Radio™ reception On or Off.

Shortly plays the broadcasts for the frequencies with superior reception for 5 seconds per item.

• When pressed quickly (less than 0.8 seconds): Seeks the previous/next frequency.

• When pressed and held (more than 0.8 sec-

SEEK/TRACK

onds): Moves quickly through all of the frequencies. The moment that you release the button, the system seeks the next available frequency.

TUNE

knob to manually seek avail-

TUNE

Turn the able frequencies.

• FM: Increment/decrement by 200 kHz

• AM: Increment/decrement by 10 kHz

FM/AM I 2-3

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-3K_UMa_UVO3[USA_EU]AV_PART2.indd 2-3 2016-01-27 오후 4:23:402016-01-27 오후 4:23:4

HD Radio™ Technology

Contributes to the superior user experience of HD

Radio™ Technology. Presents song name, artist, station IDs, HD2/HD3

Channel Guide, and other relevant data streams.

nal music as well as deep cuts into traditional genre.

signal. AM sounds like today’s FM and FM sounds like a CD.

Program Service Data:

Adjacent traditional main stations are extra local FM

channels. These HD2/HD3 Channels provide new, origi-

Digital, CD-quality sound. HD Radio™ Technology

enables local radio stations to broadcast a clean digital

If an HD Radio™ broadcast is received, the radio mode will switch from analog broadcast to HD Radio™ broadcast.

Information

• The HD Radio™ screen is displayed only

when a HD Radio™ broadcast is being received

2-4 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-4K_UMa_UVO3[USA_EU]AV_PART2.indd 2-4 2016-01-27 오후 4:23:422016-01-27 오후 4:23:4

Basic Mode Screen (HD Radio™ reception ON)

Name Description

Displays main HD Radio™ channels and

HD Radio™

Reception & Channel buttons

HD Channel

Number

HD Broadcast

Info

HD Radio

used to directly select the current available channels.

The HD Radio™ related icon display

becomes active within regions where an HD Radio™ signal can be received.

Analog station and corresponding HD Radio™ channel number saved in the preset list.

Displays detailed information about the current broadcast (the details of the information shown are different depending on whether the Info button is selected)

When the HD Radio™ soft button is ON (the blue indicator on the HD Radio™ button is illuminated), HD Radio™ signals will be broadcast.

HD Radio™ Technology I 2-5

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-5K_UMa_UVO3[USA_EU]AV_PART2.indd 2-5 2016-01-27 오후 4:23:432016-01-27 오후 4:23:4

SiriusXM™

You can access the radio player either by pressing the

key or by selecting the Radio menu option from All Menus on the Home screen. Select the SiriusXM™ band from the radio player.

SiriusXM™ Mode Display Controls

Information

• If you press the

on and a r

• If you are in the SiriusXM™ mode, select the SiriusXM™ radio widget

from the Home screen to access the r

• When the power is off, pressing the

y a SiriusXM™ Radio broadcast.

and pla

RADIO

key when the power is off, the power will turn

adio broadcast will be tuned from the current mode.

adio player.

RADIO

key will turn the power on

RADIO

Features Description

Shows the stored presets for user selection.

•

Preset Frequencies

Channel Logo

Channel Info

Content Info

Category Info

Band

Direct Tune

Scan

Category Lock

Category

Selection Buttons

Play Live

Skip Backward

• After selecting frequency, press and hold the preset button for more than 0.8 seconds. A beep sound will be heard and the frequency is to be stored in the selected preset button.

Displays the current channel logo.

Displays the current channel number and name.

Displays the artist, title and other information about the current playing song.

Displays the category of the currently playing song.

Changes to the desired band from among FM, AM, and SirusXM.

Used to search for the desired channel by entering the channel number.

Plays all receivable channels for 10 seconds per item.

If pressed, only the channels for the current category can be searched or scanned.

Used to select the previous/next category.

Switches to the live broadcast mode.

Repeats the previously broadcasted program.

•

Holding for less than 0.8 seconds: Mov the previous segment.

•

Holding for more than 0.8 seconds: Mov the previous 5 seconds.

es to

2-6 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-6K_UMa_UVO3[USA_EU]AV_PART2.indd 2-6 2016-01-27 오후 4:23:432016-01-27 오후 4:23:4

Features Description

Play/Pause

Skip/Forward

Pauses/plays the current broadcasting program.

Moves to the next segment.

Saves the current music’s tag information to the

Tag

head unit. If connected to iPod, the tag information can be saved on the device.

Presets

Shows the stored presets for user selection.

Runs the SoundHound feature.

SoundHound

For more details regarding this feature, refer to the SoundHound information in the Info section.

List

Moves to the channel list.

•

What is on My Presets?

The program schedule saved in my preset. (For more details, see Section 2.5. Viewing Menu.)

eatured Favorites

• F

Theme channels recommended by SiriusXM™. (For more details, see Section 2.5. Viewing Menu.)

• Preset Scan

Plays preset channels for 10 seconds each.

• Sound Settings

Moves to the Sound Settings.

• When pressed quickly (less than 0.8 seconds): Plays the previous/next channel.

•

SEEK/TRACK

When pressed and held (more than 0.8 seconds): Continuously changes the channel until the key is released and pla channel.

TUNE

Changes the channel.

ys the current

SiriusXM™ I 2-7

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-7K_UMa_UVO3[USA_EU]AV_PART2.indd 2-7 2016-01-27 오후 4:23:442016-01-27 오후 4:23:4

Selecting through Channel/Category List

Select the

egory and channel.

Select the desired category and the channel. Once selected, the previous screen will be restored and the selected channel will begin playing.

List

▶ Select the desired cat-

If you select the scan channels using the

key or the

Skip

button, you can

TUNE

knob by skipping the

SEEK

TRACK

channels that you chose to skip.

Direct Tune

Enter the number of the channel you want to receive.

Viewing Menu

Using the

can view the program schedule and information about the Featured Favorites provided by SiriusXM™ .

button on the right, you

2-8 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-8K_UMa_UVO3[USA_EU]AV_PART2.indd 2-8 2016-01-27 오후 4:23:452016-01-27 오후 4:23:4

What is on My Presets? (Program Schedule)

Name Description

By selecting this option, you can select a broadcasting date. Broadcast information will be provided for one week from the current date.

Change

Broadcast Date

Preset

You can select Menu to see program information and the schedules of broadcast channels listed in the presets.

Program

Information

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-9K_UMa_UVO3[USA_EU]AV_PART2.indd 2-9 2016-01-27 오후 4:23:462016-01-27 오후 4:23:4

Shows saved presets for user selection

A total of 40 frequencies for SiriusXM™ modes

can be displayed.

Shows you the program titles to be broadcasted at the time that you have chosen. Select a program to see more details.

If there is more information on the program you

selected, an arrow button will be displayed on the right of the list. You can see more program information by selecting the arrow button.

SiriusXM™ I 2-9

Featured Favorites

Featured Favorites feature allows SiriusXM™ to broadcast additional presets.

• Example 1: "Martha's Favorites" may represent Martha Stuart's favorites presets on her radio.

• Example 2: During holidays, "Holiday Music" may represent all the Sir channels that are pla

ying the holiday

music for easy access by users.

Multiple sets Featured Favorites data can be broadcast by SiriusXM™ and can change from time to time.

iusXM™

2-10 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-10K_UMa_UVO3[USA_EU]AV_PART2.indd 2-10 2016-01-27 오후 4:23:472016-01-27 오후 4:23:4

About Disc

Precautions upon Handling Discs

CAUTION

• After using a disc, put the disc back in its

original case to prevent disc scratches.

• Do not use abnormally shaped discs (8cm,

t-shaped, octagon-shaped) as such discs

hear could lead to errors.

• Do not clean discs with chemical solutions,

such as record spr antistatic liquids, benzene, or thinners.

• Do not expose the disc to direct sunlight or

high temper of time. Such exposure may lead to disc deformation.

• Upon playing a disc contaminated by dirt

or other substances deteriorate and result in skipping sounds.

iting on either side of the disc could result

Wr in damage to disc surf

ays, antistatic sprays,

atures for prolonged periods

, the sound quality may

aces.

• Clean fingerprints and dust off the disc

surface (coated side) with a soft cloth.

• Copy-protected CDs, such as S-type CDs,

y not properly operate in the device. DATA

ma CDs cannot be played. (However,

y still abnormally operate.)

• Do not disassemble the device. Contact a

designated ser (Complete after ser

vided if the user disassembles the device.)

pro

• Do not use water to clean the device.

Exposure to w damage.

• Do not introduce foreign substances into

the disc inser substances could damage the device interior.

• The device may not properly operate in

xtremely hot or cold temperatures. (The

e operating temperature range is: 14˚F ~ 150˚F)

vice center in case of problems.

vice assistance will not be

ater could lead to product

t/eject slot. Introducing foreign

such discs

• Steam can become condensed on the

ﬁ beroptic lens due to rain, wet conditions, or upon operating the heating system. In such cases, discs may not be properly recognized. Remove the disc and wait until the moisture dries.

• Skipping may occur during audio play when

iving on bumpy roads for prolonged per

dr of time or upon se case of severe shock, audio may not proper pla

vere shock to the vehicle. In

iods

About Disc I 2-11

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-11K_UMa_UVO3[USA_EU]AV_PART2.indd 2-11 2016-01-27 오후 4:23:472016-01-27 오후 4:23:4

Supported Disc Formats

This device supports the following disc formats.

Disc Type

Disc Type Disc Format Device Support

3inch (8cm)

5inch (12cm)

SACD

CD-R

CD-RW

Multisession-CD

SACD

(Single, SACD layer)

SACD (Hybrid)

Disc Format

Disc Type Disc Format Device Support

X O O

O (Read Only) O (Read Only) O (Read Only)

(Only CD layer)

Disc/Content Format Compatibility

By Format according to Disc Type

Disc Type Disc Format Device Support

CD LPCM

MPEG1, Layer3

MP3

WMA Ver9

MPEG2, Layer3

MPEG2.5

O O O

Ordinary Disc Compatibility

This device has been designed/manufactured to be compatible with software bearing the following logo marks.

$XGLR&'

• CD-R/RW discs (Audio CD) created with CD recording devices or PCs may not properly operate in the device. This is a result of various causes, including disc format, recording method, and contamination to the disc or lens.

CD-DA

MP3

WMA

2-12 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-12K_UMa_UVO3[USA_EU]AV_PART2.indd 2-12 2016-01-27 오후 4:23:472016-01-27 오후 4:23:4

MPEG4 AAC

DTS-CD

CD-ROM

CD-G

CD-EXTRA

CD-TEXT

O O O

X X

X O O

CD-R/RW Compatibility

• This device supports CD-R, CD-RW, and MP3 discs burned in Audio CD formats.

• The recording of CD-R and CD-RW discs with this device is not supported.

• CD-R/RW discs recorded as audio CDs

ere not finalized are not suppor

that w b

y this device.

ted

PC-created Disc Compatibility

• When burning a disc on a PC, the disc

y not operate in this device depend-

ma ing on the software settings. In such cases, inquire with the software manufacturer.

• Additional information regarding compatibility is displayed on the CD-R/RW software disc box. DVD-R/W discs are not compatib

• this de

vice.

le with

Cautions upon Writing CDs

• When a multi-session disc is being recorded, make sure to close the session before recording.

• If MP3/WMA file extensions are changed, such could result in errors.

• In the case of MP3/WMA, write using only English. (Other languages are not suppor

ted)

Unauthorized use of copy-protected

• music files is prohibited by law.

• Prolonged use of CD-R/CD-RW products that do not satisfy related specifications may result in abnormal operation. When writing CDs, low-speed wr

• recommended.

iting is

Compressed Audio Compatibility

• Physical formats of CD: Model 1, Model ormat 1.

2 XA f

• This device supports audio file com-

pressed through MPEG-1 audio stream layer 3 (MP3) using 8kbps ~ 320kbps. (CBR or VBR)

• For stable operation, the use of files

in 95kbps~192kbps bit rate range and

44.1kHz SAMPLING frequency is recommended.

• This device supports WMA audio files

using 20kbps ~ 320kbps. (CBR or VBR)

• Variable bit rate files may operate, but

the play time information may not be properly displayed.

•

This device only supports trac extension of “.mp3” or “.wma”.

• This device does not support multises-

sion discs. This device supports only 8 layer folders.

•

ks with file

About Disc I 2-13

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-13K_UMa_UVO3[USA_EU]AV_PART2.indd 2-13 2016-01-27 오후 4:23:482016-01-27 오후 4:23:4

• This device supports MP3 ID3 tag versions of Ver. 1.0, Ver. 1.1, Ver. 2.2, Ver.

2.3, Ver. 2.4. When using discs with other versions, the ID3 info will not be displayed.

• Although this device has been designated to be compatible with various bit rates, playing low bit rate MP3 tracks may result in low quality sound.

Before Playing an MP3 Disc

Supported MP3 File Speciﬁ cation

• Acceptable standard: MPEG1 Audio Layer 3.

• Acceptable sampling frequency: 8,

11.025, 12, 16, 22.05, 24, 32, 44.1, 48(KHz).

• Acceptable bit rate: 8 ~ 320 (Kbps).

Recommended Bit Rates and Frequency

• Sampling frequency: 96 ~ 192 Kbps fixed bit rate/44.1 kHz.

Detailed Speciﬁ cation

• Maximum directory layers: 8 layers.

• Maximum folder length: 64 bytes, file name length: 64 bytes. Supported characters for f

• name:

2350 characters for Alphanumer character and Korean character sets, 4888 characters for Simplified Chinese character set. Maximum number of folders per disc:

• f

olders. (including ROOT)

• Maximum number of files per disc: 512 files.

older name/file

256

NOTICE

• Supported ID3 tags: ID3v1.0, ID3v1.1,

ID3v1.2, ID3v2.2, ID3v2.3, ID3v2.4.

• Supported MP3 Media: CD-ROM.

• Supported media formats:

and LEVEL2.

ISO9660 LEVEL1

Precautions upon Burning MP3 Files

• The use of ISO 9660 LEVEL 2 JOLIET ormat is recommended.

•

Up to 32 characters in K are suppor

ted for file names and up to

orean/Chinese

20 characters in Korean/Chinese are supported for folder names. The use of CDs exceeding 700MB ma

•

y result in faulty disc recognition or errors upon pla

2-14 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-14K_UMa_UVO3[USA_EU]AV_PART2.indd 2-14 2016-01-27 오후 4:23:482016-01-27 오후 4:23:4

MP3 File Structure

Recognition occurs through the same folder structure used within the disc.

Folder structure as saved in CD-ROM Folder structure as saved in the system

About Disc I 2-15

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-15K_UMa_UVO3[USA_EU]AV_PART2.indd 2-15 2016-01-27 오후 4:23:482016-01-27 오후 4:23:4

Disc CD

CD Mode Display Controls

Name Description

Mode

Track Index

Repeat/

Shuffle/Scan

Play Time

Play Info

Displays current operating mode

Shows the current track/total tracks

From Repeat/Shuffle/Scan, displays the currently operating function

Displays the current play time

Displays track/artist/title/album information

• When the play time is under 3 seconds the

Tr a ck

previous trac When the play time is ov

•

song from the beginning

Play/Pause

Next Track

Plays/pauses the current track

Moves to the next track

Repeats the current track

Repeat

Select the

Repeat

button to switch between repeat-

ing the current track

Plays disc tracks in random order

Shuffle

Select the fle all

Shuffle

button to switch between shuf-

→ and turning shuffle off

Scans the beginning parts of disc tracks (approx.

Scan

List

10 seconds per track)

Scan

Select the

→ and turning scan off

all

button to switch between scan

Moves to the track list screen

er 3 seconds current

→ and turning repeat off

2-16 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-16K_UMa_UVO3[USA_EU]AV_PART2.indd 2-16 2016-01-27 오후 4:23:482016-01-27 오후 4:23:4

Name Description

Runs the SoundHound feature.

SoundHound

For more details regarding this feature, refer to the SoundHound information in the Info section.

Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound.

•

If button is pressed quickly (less than 0.8 seconds), it moves to previous or next track

• If button is pressed and held (more than 0.8 seconds), it rewinds or fast-forward the track

SEEK/TRACK

When button pressed for 5 seconds, it will rewind or fast-forward the track at 4x speed. After that, it will rewind or fast-forward at 20x speed. Once released, the track will begin playing at normal speed.

Turn the

TUNE

knob and search a desired

track. When the track name is displayed, press

TUNE

knob

TUNE

the

If the

to play the track.

TUNE

knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.

Disc CD I 2-17

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-17K_UMa_UVO3[USA_EU]AV_PART2.indd 2-17 2016-01-27 오후 4:23:502016-01-27 오후 4:23:5

Name Description

Current Track

Back Button

Displays current playing track name

Converts to basic mode screen

When moving to a different list screen, moves to

the list page where the current file is located (Becomes disabled when the current list includes the current file)

• If button is pressed (less than 0.8 seconds): Plays previous/next track

SEEK/TRACK

• If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will re fast-forward the track. It will play the track normally if it is released.

TUNE

Turn the next/previous track. If the desired track is selected, press the

knob to move the focus to the

TUNE

knob to play the track.

wind or

2-18 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-18K_UMa_UVO3[USA_EU]AV_PART2.indd 2-18 2016-01-27 오후 4:23:512016-01-27 오후 4:23:5

Disc MP3

MP3 Mode Display Controls

Name Description

Mode

File Index

Repeat/ Shuffle/Scan

Play Time

Song Info

List

Previous File

Play/Pause

Next File

Repeat

Displays current operating mode

Shows the current MP3 file/total number of MP3 files

From Repeat/Shuffle/Scan, displays the current operating function

Displays the current play time

Displays folder/file/artist/title/album info for current song

Moves to the list screen

If play time is less than 3 secs, moves to previ-

• ous file

• If play time is more than 3 secs, play the current file from the beginning

Plays/pauses the current track

Moves to the next song

Repeats the current song or all songs in the folder. Select the repeating 1 song and turning repeat off

Repeat 1 song: Repeats the current song

Repeat Folder: Repeats songs in the folder

Repeat

button to switch between

→ repeating folder →

Disc MP3 I 2-19

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-19K_UMa_UVO3[USA_EU]AV_PART2.indd 2-19 2016-01-27 오후 4:23:522016-01-27 오후 4:23:5

2-20 I Radio/Media

Name Description

Plays files in the folder or in the disc in random order. Select the between shuffle folder

Shuffle

→

ning shuffle off

and tur

Shuffle folder: Plays songs in the folder in

random order

Shuffle All: Plays songs in the disc in random

order.

Scans the beginning parts of MP3 files (approx. 10 seconds per file)

Scan

Select the scan folder

button to switch between

→ scan all → and turning

scan off

Scan Folder: Scans tracks in the current folder

Scan All: Scans all tracks in the disc

Runs the SoundHound feature.

SoundHound

For more details regarding this feature, refer to the SoundHound information in the Info section.

Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound.

• If button is pressed (less than 0.8 seconds): Plays previous/next track

SEEK/TRACK

•

If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will re or f

ast-forward the track.

Turn the

TUNE

knob to search a desired

track. If the desired track is displayed, press the

TUNE

knob to play the track.

If the

TUNE

knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.

Shuffle

button to switch

→ shuffle all

wind

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-20K_UMa_UVO3[USA_EU]AV_PART2.indd 2-20 2016-01-27 오후 4:23:522016-01-27 오후 4:23:5

Name Description

Folder Name

Current Song

Back Button

Upper Folder

Displays folder name for current file

Displays currently playing file name

Converts to basic mode screen

Moves to Root Folder

When moving to a different list screen, moves to

the list page where the current file is located (Becomes disabled when the current list includes the current file)

• If button is pressed (less than 0.8 seconds): Plays previous/next track

SEEK/TRACK

• If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will re fast-forward the track.

TUNE

knob to move the focus to the

TUNE

knob to play the track.

TUNE

Turn the previous/next track. If the desired track is displayed, press the

wind or

Disc MP3 I 2-21

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-21K_UMa_UVO3[USA_EU]AV_PART2.indd 2-21 2016-01-27 오후 4:23:532016-01-27 오후 4:23:5

USB

Before Playing a USB MP3

Connect the USB device after turning on the engine. The USB device may become damaged if it is already connected when the ignition is turned on.

•

Files that are not standard format m played.

• For MP3/WMA/OGG files, only music files with compression rates between 8Kbps ~ 320Kbps can be played. Heed caution to static electr

• e

xternal USB devices.

• Encoded MP3 Players will not be recognized when connected

xternal device.

as an e

•

When connecting an external USB device, the device ma

ly recognize the USB is in some states.

proper

•

Only products formatted with byte/sectors under 64Kb recognized. USB devices, formatted to the FAT12, FAT16, or FAT32 file sys-

• tem, are recommended. File systems other than FAT12, FA

AT32, exFAT, and NTFS are not supported.

•

Some USB devices may not be suppor issues.

2-22 I Radio/Media

icity when connecting/disconnecting

usic/image files will not be

y not

yte will be

T16,

ted due to compatibility

•

Take caution so that the USB connector does not come in contact with body parts or objects.

•

Repeated connecting/disconnecting of USB devices within shor

iods of time may result in product malfunction.

per

•

Make sure to connect/disconnect external USB de audio po

• The amount of time required to recognize the external USB device may differ depending on the type, size, or file formats stored on the USB. The use of USB devices for purposes other than playing m

• and image files is prohibited. Do not use the USB I/F to charge batteries or USB accessor

• that gener mance or damage to the device.

• The device may not recognize the USB device if separately purchased USB hubs and extension cables are being used. Connect the USB directly with the multimedia terminal of the vehicle.

• When using mass storage USB devices with separate logical drives, only files saved to the root drive can be played.

•

When application programs are installed to specific USBs ma

wer turned off.

ate heat. Such acts may lead to worsened perfor-

y not properly play.

vices with the

usic

ies

, files

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-22K_UMa_UVO3[USA_EU]AV_PART2.indd 2-22 2016-01-27 오후 4:23:532016-01-27 오후 4:23:5

• The device may not operate normally if MP3 Players, cellular phones, digital cameras, or other electronic devices (USB devices not recognized as portable disk driv with the de

vice.

es) are connected

• Charging through the USB may not work for some mobile devices.

• The device may not support normal operation when using a USB memory type besides Metal Cover Type USB Memory. The device may not support normal operation when using for-

• mats such as HDD Type, CF, or SD Memory.

• When playing iPods, please use a dedicated iPod car cable. Normal operation cannot be guaranteed when other cab

•

les are being used. The device will not support files locked by DRM.

•

(Digital Rights

Management)

• USB memory sticks used by connecting an Adaptor (SD Type or Type) may not be properly recognized.

•

Only use Plug type connector products, as sho

belo

wn in the figure

• To play USB MP3, the USB device must be connected to the

USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.

Plug Type Connector

Product Name Manufacturer

XTICK LG

BMK BMK

SKY-DRV Sky Digital

TRANSCEND JetFlash

Sandisk Cruzer SanDisk

Micro ZyRUS ZyRUS

NEXTIK Digiworks

Information

• Problems that occur through use of USB devices not listed within the

above table are not covered by the product warranty.

echnology

Transcend

USB I 2-23

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-23K_UMa_UVO3[USA_EU]AV_PART2.indd 2-23 2016-01-27 오후 4:23:542016-01-27 오후 4:23:5

Supported USB MP3 music speciﬁ cations

Supported Image Speciﬁ cations

Name Description

MP3 File Specification

Recommended Bit Rates and Sampling Frequency

ID3 Tag

Detailed Specifications

Information

• The sound quality of MP3 files that use bitrates exceeding

192 Kbps cannot be guaranteed. When using ﬁ les without ﬁ xed bit rates some f

eatures (FF/REW features) may not properly operate.

Specification: MPEG1 AUDIO LAYER 3

Acceptable sampling frequency: 32, 44.1, 48 (kHz)

Acceptable bit rate: 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (Kbps)

96, 128, 192 Kbps fixed bit rate/44.1kHz

Supports ID3v1.0 and ID3v1.1, ID3v2.2, ID3v2.3, ID3v2.4 ID3 tags

Maximum directory layers: 20 layers Maximum length of folder name/file name: 255Bytes Supported characters for folder name/file name: Alphanumeric characters, Korean standard character set 2,350 characters, Simplified Chinese 4888 characters Maximum number of folders which can be stored onto one USB: 2000 folders (including ROOT) Maximum number of files which can be stored onto one USB: 8000

Image format

Supported image resolution

Supported image file size

Name Description

JPG, GIF, BMP, PNG (animated GIF, etc. are not supported)

5M pixels for JPG, BMP, PNG (1M pixels maximum for GIF)

2-24 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-24K_UMa_UVO3[USA_EU]AV_PART2.indd 2-24 2016-01-27 오후 4:23:592016-01-27 오후 4:23:5

USB Mode Display Controls

Features Description

Mode

File Index

Repeat/

Shuffle/Scan

Play Time

Song Info

List

Back Button

Displays the current operating mode

Shows the current file/total files within the USB

From Repeat/Shuffle/Scan, displays the current operating function

Displays the current play time/total play time

Displays the information of the current track

When a trac

• is selected:

k in the file tab on the list screen

Displays folder, file, title, artist,

album info

• When a track in the other tabs on the list screen is selected: Displays artist, title, album info

Moves to the list screen

Converts to basic mode screen

Features Description

If button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)

If play time is less than 3 seconds, mov

Previous File

• pre

vious file

If play time is more than 3 seconds, pla

• current file from the beginning

utton is pressed (more than 0.8 seconds) it

If b rewinds the track

Play/Pause

Plays/pauses the current file

• If button is pressed (less than 0.8 seconds):

Next File

Moves to the next file If button is pressed (more than 0.8 seconds):

• It fast-forwards the track

Repeats the current file

• If select the song in the file tab on the list screen: Select the between repeating one song

Repeat

folder

, and turning repeat off

• If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select

Repeat

the ing one song

button to switch between repeat-

and turning repeat off

Plays files in random order

• If select the song in the file tab on the list screen: Select the between Shuffle Folder

Shuffle

and turning shuffle off

• If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select

Shuffle

the Category

button to switch between Shuffle

and turning shuffle off

Repeat

button to switch

Shuffle

button to switch

, Shuffle All ,

es to

y the

, repeating

USB I 2-25

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-25K_UMa_UVO3[USA_EU]AV_PART2.indd 2-25 2016-01-27 오후 4:23:592016-01-27 오후 4:23:5

Features Description

Scans the beginning parts of USB files (approx. 10 seconds per file)

• If select the song in the file tab on the list screen: Select the

Scan

between Scan Folder and turning scan off

• If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select

Scan

the category

button to switch between Scan

and turning scan off

Scan

button to switch

, Scan All ,

Features Description

• Add to Playlist: Add the current track to the Playlist: Pla

ylist is placed on the left tab in the list Save to My Music: You can save

• tr

ack to My Music. You can play saved track from My Music without USB. Access to My Music in the Media mode. Sound Settings: Mov

• screen.

You can change the settings of the

sound.

Runs the SoundHound feature.

SoundHound

For more details regarding this feature, refer to the SoundHound information in the Info section.

If button is pressed (less than 0.8 seconds) moves to previous/next file or play the current track from the beginning

If play time is less than 3 seconds, mov

SEEK/TRACK

• pre

vious/next file

If play time is more than 3 seconds, pla

• current file from the beginning

utton is pressed (more than 0.8 seconds) it

If b will rewind/fast-forward the track

Turn the

TUNE

knob to search a desired

track. If the desired track is displayed, select

TUNE

the

If the

knob to play the track.

TUNE

knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.

the current

es to the Sound Settings

es to

y the

2-26 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-26K_UMa_UVO3[USA_EU]AV_PART2.indd 2-26 2016-01-27 오후 4:24:002016-01-27 오후 4:24:0

Features Description

Folder/ Category Name

Current Song

Back Button

Upper Folder/

Category

Displays folder/category name in the list

Displays the current playing file name

Converts to basic mode screen

Moves to Upper Folder

Features Description

• Add to Playlist: Adds the current track to the ylist is placed on the left tab in the

um 100 files) Select a desired trac

“Add to Playlist” to add the trac

ylist.

ylist and press

ylist” to delete the track in the pla

Playlist: Pla list (Maxim and press the pla

•

Delete from Playlist: Select a track you w delete from the pla Pla Now Playing: When moving to a different list

•

screen, moves to the list page where the current file is located (Becomes disabled when the current list includes the current file)

• Save to My Music: Stores the music. The

stored music can be played in My Music. function is not pro

vided in Playlist.)

Search tracks by the list type. Search songs

Search Menu

according to File, Playlist, Artist, Song and Album.

If access the search menu while playing a

track, it moves to the previous search mode.

If button is pressed (less than 0.8 seconds): Plays previous/next track

• If play time is less than 3 seconds, moves to

previous/next file

SEEK/TRACK

• If play time is more than 3 seconds, play the

current file from the beginning If button is pressed (more than 0.8 seconds): Moves to play screen, and then it will rewind or fast-forward the track. It will play the track normally if button released.

TUNE

knob to move the focus to the

TUNE

knob to play the track.

TUNE

Turn the previous/next list. If the desired track is displayed, press

k in

ant to

“Delete from

ylist

(This

USB I 2-27

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-27K_UMa_UVO3[USA_EU]AV_PART2.indd 2-27 2016-01-27 오후 4:24:012016-01-27 오후 4:24:0

USB Image

Features Description

Mode

Folder/File Name

File Index

Slideshow

Rotate

Info

Adjust Image Size

List

Previous/ Next image

Displays the current operating mode

Displays folder name where image is located

Shows the current file/total files within the USB

Images as slideshow in 5, 10, 20, 30 second intervals

Rotate image in clockwise direction

Shows the file name, resolution and file type of current image

Enlarge/reduce (zoom-in/zoom-out) image size

Moves to the list screen

Swipe image left or right to see Previous/Next image

2-28 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-28K_UMa_UVO3[USA_EU]AV_PART2.indd 2-28 2016-01-27 오후 4:24:022016-01-27 오후 4:24:0

Features Description

Current File

Back Button

Displays the current playing file name

Converts to basic mode screen

Now Playing: When moving to a different list

screen, moves to the list page where the current file is located (Becomes disabled when the current list includes the current file)

Controls background mode

SEEK/TRACK

• Radio mode: Changes Frequency and Channel Media mode: Changes Track (excluding AUX)

•

Controls background mode

• Radio mode: Changes Frequency and Channel

TUNE

• Media mode: Changes track (excluding AUX). If a desired track is display to move to the track.

ed, press the knob

USB I 2-29

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-29K_UMa_UVO3[USA_EU]AV_PART2.indd 2-29 2016-01-27 오후 4:24:032016-01-27 오후 4:24:0

iPod

※

The use of genuine iPod cables supplied by Apple is recommended. (The use of other products may result in noise or abnormal operation.)

Using iPod Devices

• iPod is a registered trademark of Apple Inc.

•

iPod mode will not operate if the connected iPod cannot be recognized due to operation of unsupported versions that do not support related protocols, iPod abnormalities, or iPod device defects. Some iPods with unsupported communication protocols may not properly operate with the Multimedia system.

• For fifth generation iPod Nano devices,

od may not be recognized when

the iP the battery level is low. Please charge the iPod for use.

• Search/play orders shown within the iPod device may differ with the orders shown within the Multimedia system.

•

If the iPod malfunctions due to an iP

vice defect, reset the iPod and try

de again. (To learn more, refer to your iP manual)

• If repeatedly connect and disconnect iPod/iPhone to the Multimedia system with USB cable in a short time, it may cause abnormal operation.

•

The time for recognition of iP

y vary depending on device type,

od/iPhone

firmware version and iOS version.

• For some iPod Touch and iPhone devices, connecting Bluetooth

od is operating may result in discon-

while the

tinued iPod sound. When such devices with Bluetooth

support are connected, this problem occurs as the sound source is changed from the Doc

k Connector

(USB connector cable) to Bluetooth.

• To prevent this symptom, Bluetooth A

udio function in the Multimedia system

is limited if iP

od/iPhone is connected to the system through both cable and Bluetooth. To listen to the iPod sound, use either iPod menu with USB connection or Bluetooth Audio with Bluetooth connection.

• To listen to the iPod sound, reconnect the USB cable or change the audio output settings in iPod/iPhone to Dock. In order to use the iPod while oper

• the k

eys, you must use a dedicated iP

le. (the cable that is supplied when

cab

ating

purchasing iPod/ iPhone products)

※

During ACC ON state, connecting the iPod through the iPod cable (The cable that is supplied when purchasing iPod/ iPhone product.) will charge the iPod through the head unit.

※

The use of genuine iPod cables supplied by Apple is recommended. (The use of other products may result in noise or abnormal operation.)

※

To play iPod music through cable con-

nection, the iPod/USB cable must be connected to the USB port in the front multibox. The USB port in the center console storage (if equipped) is for charging only.

2-30 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-30K_UMa_UVO3[USA_EU]AV_PART2.indd 2-30 2016-01-27 오후 4:24:032016-01-27 오후 4:24:0

• When connecting with the iPod cable, make sure to fully insert the jack to prevent communication interference. If the iPod is connected to the v is pla

ying, a high pitch tone ma

ehicle while it

y sound for about 1~2 seconds immediately after connection. to the v

If possible, connect the iP

ehicle with the iPod stopped/

paused.

• Within iPhones, streaming audio and iPod control may occasionally conflict. If problems persist, remove the iPhone and connect again. When connecting to iPod Nano /Classic

• the Kia Motor logo appears on the Apple device. For the iPod Nano 6 generation, however, appear since it is not suppor iPhone and iP suppor

the logo image does not

od T

ouch products do not

t this function.

ted. Also

, all

• In Apple’s iOS 6.0 version or later, Podcast and Audiobook media files are designed to be played with the Podcasts and iBooks applications specifically designed for Apple products. If the Apple device does not provide the Podcast and Audiobook lists, the pla

y not be displayed and play

ma iP

od mode.

• If the Apple Podcasts and iBooks apps are not installed on the Apple de the Apple de

vice provides the Podcast

and Audiobook lists, you can pla

other categor

ies in iPod mode.

• The screen of multimedia system can be different when you run other music players (e.g. iHeartRadio) on your connected device.

ylist

ed in the

vice, bu

y files in

iPod I 2-31

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-31K_UMa_UVO3[USA_EU]AV_PART2.indd 2-31 2016-01-27 오후 4:24:032016-01-27 오후 4:24:0

Caution

• While using a connected iPhone/iPod Touch device, it may not operate normally if the user changed some functions in the device.

• When calling with an iPhone connection, song may stop playing due to an Apple device feature. If sound does not resume after the call is terminated, check the device status.

•

If lots of songs have the same information, skipping may occur when previous/ next song is executed due to an Apple device feature. Also problems may occur depending on de v

ersion.

• If lots of songs have the same information, the song that plays may be different between the system and the Apple device. Reset the device or delete the same songs in the Apple device using iTunes.

vice type or iOS

• If you control pause, repeat, shuffle, or seek songs when the play time is less than 3s before the song is finished playing, it may occur difference of playing song between the Multimedia system and Apple device. Access to iPod m

usic

•

We recommend that your Apple de uses the latest fir problems ma

mware since some

y occur due to an outdated firmware or other software related issues.

from another mode or pause a song and then pla

iPod Shuffle Not Supported

y a song again in Apple device.

Type 1G 2G 3G 4G 5G 6G 6.5G 7G

iPod Mini Not Supported

iPod Nano

○ ○ ○○○ ○

Not

released

○

iPod Touch

iPad

iPad Mini

iPod Classic Not Supported

Type 3G 3GS 4 4S 5 5C 5S 6 6+

iPhone

(iOS 1.1 not sup-

ported)

Not verified,

Normal working not guaranteed

○ ○○○

(Unable to charge, Not verified, Normal working not guaranteed)

○

(Unable to charge, Not verified, Normal working not guaranteed)

○

(iPod with

Video)

○

(iPod

Classic)

Not released

○

(iPod

Classic)

○○○○○○○○

vice

○

Not

released

2-32 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-32K_UMa_UVO3[USA_EU]AV_PART2.indd 2-32 2016-01-27 오후 4:24:032016-01-27 오후 4:24:0

Caution

• If the iPhone/iPod Touch supports Bluetooth, the Apple device will not be ab

le to use the Bluetooth function if the vice is connected through both the

de USB port and via Bluetooth. the USB connection then use Bluetooth

udio

• If iPod/iPhone connected to the Multimedia system through both USB and AUX. iPod/iPhone keeps output sound via AUX, thus it ma will not output in iP

od mode.

• If AUX cable connected to iPod/iPhone but not connect to the Multimedia system, it ma

y occur sound will not output in iPod mode due to iPod/iPhone’s feature. Especially, if you use AUX cable like pictures, this problem may occur. Disconnect AUX cable from iP

• first, then connect to the Multimedia system via USB

k” in iPod/iPhone.

“Doc

. Or change settings to

Disconnect

y occur sound

od/iPhone

• If connect to the Multimedia system while podcast or iTunes music downloading to iPod/iPhone, it may occur some problems when you select song in the list. Reconnect iP Multimedia system when do

od/iPhone to the

wnloading

is finished or the file deleted.

• If connect to the Multimedia system while sync, it may occur some problems. Try to use iP sync complete

od/iPhone connection after

. (To learn more, refer to

your iPod manual)

• iPhone and iPod Touch devices are guaranteed to work nor

w. However, they may not work

or belo normally on future iOS v

ations have not yet been tested.

oper

mally on iOS 8.2

ersions as their

iPod I 2-33

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-33K_UMa_UVO3[USA_EU]AV_PART2.indd 2-33 2016-01-27 오후 4:24:042016-01-27 오후 4:24:0

iPod Mode Display Controls

Features Description

Mode

Song Index

Repeat/Shuffle

Play Time

Song Info

List

Displays the current operating mode

Shows the current song/total songs

From Repeat/Shuffle, displays the current operating function

Displays the current play time/total play time

Displays the artist/song title/album info

Moves to the list screen

Features Description

If button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)

If play time is less than 3 seconds, mov

Previous File

• pre

vious file

If play time is more than 3 seconds, pla

• current file from the beginning

utton is pressed (more than 0.8 seconds) it

If b rewinds the track.

Play/Pause

Plays/pauses the current file

• If button is pressed (less than 0.8 seconds),

Next File

Moves to the next file If b

•

utton is pressed (more than 0.8 seconds),

it does f

ast-forward the track.

Repeats the current file

Repeat

Select the ing 1 track

button to switch between repeat-

, and turning repeat off

Plays files in random order

Shuffle

button, it changes to

→ deactivate shuffle then

Shuffle

When pressing shuffle category repeat

• Shuffle Category: Shuffle song in the current categor

Back Button

Move to home/previous mode screen

Runs the SoundHound feature.

SoundHound

For more details regarding this feature, refer to the SoundHound information in the Info section.

Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound.

es to

y the

2-34 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-34K_UMa_UVO3[USA_EU]AV_PART2.indd 2-34 2016-01-27 오후 4:24:042016-01-27 오후 4:24:0

Features Description

If button is pressed (less than 0.8 seconds) moves to previous/next file or play the current song from the beginning

• If play time is less than 3 seconds, moves to

SEEK/TRACK

previous/next file

• If play time is more than 3 seconds, plays the current file from the beginning

If button is pressed (more than 0.8 seconds) it will rewind/fast-forward the track

Turn the

TUNE

knob to search a desired

track. If the desired track is displayed, press

TUNE

the

If the

knob to play the track.

TUNE

knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.

iPod I 2-35

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-35K_UMa_UVO3[USA_EU]AV_PART2.indd 2-35 2016-01-27 오후 4:24:052016-01-27 오후 4:24:0

Features Description

Category Name

Displays the category name

Displays the contents of selected category

Category List

If there are many items in the list, items are added in order and the scroll bar on the right is adjusted accordingly.

Back Button

Upper Folder

Converts to basic mode screen

Moves to Upper Folder

Search tracks by the list type. Search songs according to Playlist, Artist, Song, Album,

Search Menu

Genre, Composer, Podcast and Audiobook .

If access the search menu while playing

a track, it moves to the previous search mode.

If button is pressed (less than 0.8 seconds) moves to previous/next file or play the current song from the beginning

• If play time is less than 3 seconds, moves

SEEK/TRACK

to previous/next file

• If play time is more than 3 seconds, plays the current file from the beginning

If button is pressed (more than 0.8 seconds) it will rewind/fast-forward the track.

Turn the

TUNE

knob to search a desired

track. If the desired track is displayed, press

TUNE

the If you do not anything with the knob for 5 seconds, the

knob to play the track.

TUNE

terminated.

knob search will be

2-36 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-36K_UMa_UVO3[USA_EU]AV_PART2.indd 2-36 2016-01-27 오후 4:24:052016-01-27 오후 4:24:0

AUX

Connecting an External Device

If an external device connector is connected with the AUX terminal, then AUX mode will automatically operate. Once the connector is disconnected, the previous mode will be restored.

• AUX mode can be used only when an external audio player has been connected. The AUX v

• separ device.

olume can also be controlled

ately through the connected

NOTICE

• If only a cable is connected to the AUX

without an external device, the mode will be changed to AUX, but noise may occur. When an external device is not being used, remove the connector jack.

• When the external device power is

connected to the power jack, playing the external device may output noise.

, disconnect the power connection

cases before use.

In such

AUX I 2-37

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-37K_UMa_UVO3[USA_EU]AV_PART2.indd 2-37 2016-01-27 오후 4:24:062016-01-27 오후 4:24:0

Bluetooth® Audio

Bluetooth Audio Mode Display Controls

Features Description

Mode

Phone Name

Artist Info

Title

Previous File

Play/Pause

Next File

SoundHound

SEEK/TRACK

TUNE

Displays the current operating mode

Displays name of connected phone

Name of current artist

Name of current song

• If play time is less than 3 seconds, moves to the previous file

•

If play time is more than 3 seconds, pla current file from the beginning

This function may differ depending on the

model of mobile phone

Plays/Pauses Bluetooth Audio

Moves to the next file

•

Connections: Mov

You can pair a new device or change/

screen. delete paired device(s). Sound Settings: Mov

• screen.

You can change the settings of the

sound.

Runs the SoundHound feature. For more details regarding this feature, refer to the SoundHound information in the Info section.

Plays the previous/next file

TUNE

is not supported.

es to the Bluetooth Settings

es to the Sound Settings

ys the

Information

• Artist info and Title may not be supported by mobile phone

2-38 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-38K_UMa_UVO3[USA_EU]AV_PART2.indd 2-38 2016-01-27 오후 4:24:072016-01-27 오후 4:24:0

Bluetooth Connections Settings

Settings for pairing, connection and disconnection of a Bluetooth device

• In Bluetooth Audio play screen, select

and then

Connections

Information

• If the music in the mobile phone is not

played after changing to audio streaming mode, press the play button. Thus check

usic is playing in the Bluetooth de

the m after changing to audio streaming mode Audio streaming may not be supported for some mobile phones

• Please check the Bluetooth compatibility

in below website: KIA Motors Corporation http://www.kia.com

vice

Bluetooth® Audio I 2-39

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-39K_UMa_UVO3[USA_EU]AV_PART2.indd 2-39 2016-01-27 오후 4:24:072016-01-27 오후 4:24:0

My Music

My Music Mode Display Controls

Features Description

Mode

File Index

Repeat/ Shuffle/Scan

Play Time

Song Info

Displays the current operating mode

Shows the current file/total files

From Repeat/Shuffle/Scan, displays the current operating function

Displays the current play time/total play time

Displays the information about the current track

• When a track in the file tab on the list screen is selected: Displays file, artist, title, album info

• When a track in the other tab on the list screen is selected: Displays artist, title, album info

Features Description

List

Previous File

Play/Pause

Next File

Repeat

Moves to the list screen

If button is pressed (less than 0.8 seconds): Moves to the previous file or play the current file from the beginning (Depends on the play time)

If play time is less than 3 seconds, mov

• pre

vious file

If play time is more than 3 seconds, pla

• current file from the beginning

utton is pressed (more than 0.8 seconds) it

If b rewinds the track

Plays/pauses the current file

If button is pressed (less than 0.8 seconds):

• Moves to the ne If b

utton is pressed (more than 0.8 seconds)

• it will f

ast-forward the file

Repeats the current file

• If select the song in the file tab on the list screen: Select the between repeating one song ing repeat off.

• If select the song in the other tabs (Playlist, Ar

tist, Song, Album) on the list screen: Select the repeating one song off

xt file

Repeat

button to switch between

es to

y the

button to switch

and turn-

and turning repeat

2-40 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-40K_UMa_UVO3[USA_EU]AV_PART2.indd 2-40 2016-01-27 오후 4:24:082016-01-27 오후 4:24:0

Features Description

Plays files in random order

• If select the song in the file tab on the list

Shuffle

and turning shuffle off

Shuffle

screen: Select the between shuffle

• If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select

Shuffle

the

button to switch between shuffle

and turning shuffle off

button to switch

Features Description

Scans the beginning parts of files (approx. 10 seconds per file)

• If select the song in the file tab on the list screen: Select the

Scan

between scan

and turning scan off

• If select the song in the other tabs (Playlist, Artist, Song, Album) on the list screen: Select

Scan

the

button to switch between scan

and turning scan off

• Add to Playlist: Adds the current song to the Playlist: Playlist is placed on the left tab in the list

• Delete Current File: Deletes the current track from My Music.

• Sound Settings: Moves to the Sound Settings screen. You can change the settings of the sound.

Runs the SoundHound feature.

SoundHound

For more details regarding this feature, refer to the SoundHound information in the Info section.

If button is pressed (less than 0.8 seconds) moves to previous/next file or play the current song from the beginning

• If play time is less than 3 seconds, moves to

SEEK/TRACK

previous/next file If play time is more than 3 seconds, pla

• current file from the beginning

If b

utton is pressed (more than 0.8 seconds) it

will rewind/fast-forward the track

Turn the

TUNE

knob to search a desired track.

If the desired track is displayed, press the

TUNE

knob to play the track.

If the

TUNE

knob is not pressed within 5 seconds of searching tracks, the track info for the current track is restored.

Scan

button to switch

ys the

TUNE

My Music I 2-41

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-41K_UMa_UVO3[USA_EU]AV_PART2.indd 2-41 2016-01-27 오후 4:24:082016-01-27 오후 4:24:0

Features Description

Folder/

Category Name

Current Song

Back Button

Upper Folder

Displays folder/category name in the list

Displays the current playing file name

Converts to basic mode screen

Moves to Root Folder

Features Description

• Add to Playlist: Adds the current track to the Playlist: Pla list (Maxim

ylist is placed on the left tab in the um 100 files) Select a track and

press “Add to Playlist” to add the trac

ylist

pla

• Delete from Playlist: Select a track from the playlist and press “Delete from Playlist” to

delete the track in the pla Delete Files: Deletes files from My Music

•

If delete file from My Music, the information

related to song also deleted in the list.

•

Now Playing: When moving to a different list screen, moves to the list page where the current file is located (Becomes disabled when the current list includes the current file

Search tracks by the list type. Search songs

Search Menu

according to File, Playlist, Artist, Song and Album.

If access the search menu while playing a

track, it moves to the previous search mode.

If button is pressed (less than 0.8 seconds) moves to previous/next file or play the current song from the beginning

•

SEEK/TRACK

If play time is less than 3 seconds, mov pre

vious/next file

If play time is more than 3 seconds, pla

• current file from the beginning

utton is pressed (more than 0.8 seconds) it

If b will rewind/fast-forward the track

TUNE

Turn the

knob to move the focus to pre-

vious/next file. If the file you want to play is dis-

TUNE

played, press

If the

TUNE

knob to play the track.

knob is not pressed within

5 seconds of searching tracks, Tune search will be terminated.

k in the

ylist

es to

ys the

2-42 I Radio/Media

K_UMa_UVO3[USA_EU]AV_PART2.indd 2-42K_UMa_UVO3[USA_EU]AV_PART2.indd 2-42 2016-01-27 오후 4:24:092016-01-27 오후 4:24:0

part.3

Bluetooth

Before Using the Bluetooth® Handsfree

Bluetooth Connection

Bluetooth Phone

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-1K_UMa_UVO3[USA_EU]AV_PART3.indd 3-1 2016-01-27 오후 4:24:322016-01-27 오후 4:24:3

••Viewing the screen for prolonged periods of time is dangerous and may lead to accidents. When driving, view the screen only for short periods of time.

Bluetooth

Before Using the Bluetooth

What is Wireless Technology?

• Bluetooth® Wireless Technology refers to a short-distance wireless networking technology which uses a 2.45GHz frequency to connect various devices within a certain distance.

• Supported within PCs, external devices, Bluetooth tronic devices, and automotive environments, to be tr ha

ving to use a connector cable.

• Bluetooth which allo make phone calls with Bluetooth mobile phones through the Multimedia system.

Handsfree

Bluetooth®

phones, PDAs, various elec-

Bluetooth

ansmitted at high speeds without

Wireless Technology

Handsfree refers to a device ws the user to conveniently

• The Bluetooth® Handsfree feature may not be supported in some mobile phones. For more information on mobile phone compatibility, visit the KIA Motor website

- KIA Motors Corporation: http://www.kia. com

WARNING

- Distracted Driving

• Focus on the road while driving. The driver's

imary responsibility is in the saf

oper

ation of the vehicle. Drivers should not use any hand held devices or other equipment or vehicle systems that distract the driver during vehicle operation.

• Do not stare at the multimedia screen for long

iods of time while driving. Staring at the

per screen for prolonged per

afﬁ

to tr

c accidents and can result in personal

ies.

injur

iods of time can lead

e and legal

Precautions for Safe Driving

• Bluetooth® is a feature that enables drivers to make handsfree calls. the head unit with a Bluetooth® phone allows the user to conveniently make calls, receive calls, and manage the phonebook. Before using Wireless Technology contents of this user’ Excessive use or operations while driv-

• ing may lead to negligent driving practices and be the cause of accidents. not oper dr

ate the device excessiv

iving. Viewing the screen for prolonged periods of time is dangerous and may lead to accidents. When driving, view the screen only for short periods of time.

Connecting

Bluetooth

, carefully read the

s manual.

ely while

3-2 I Bluetooth

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-2K_UMa_UVO3[USA_EU]AV_PART3.indd 3-2 2016-01-27 오후 4:24:332016-01-27 오후 4:24:3

CAUTIONS upon Connecting

Bluetooth

• Before connecting the head unit with the mobile phone, chec mobile phone suppor tures

• Even if the phone supports Wireless Technology, the phone will not be found during device searches if the phone has been set to hidden state or the Bluetooth Disable the hidden state or tur Bluetooth connecting with the head unit.

• If Auto Connection is used, the Bluetooth nected when the ignition is turned on, making it unnecessary to have to connect the phone with the head unit ever time

Phone

k to see that the

ts Bluetooth

power is turned off.

power prior to searching/

phone is automatically con-

fea-

Bluetooth

n on the

If you do not w

• with y Bluetooth

vice.

our Bluetooth

ant automatic connection

feature off of the Bluetooth

device, turn the

• Park the vehicle when connecting the head unit with the mobile phone.

•

Bluetooth

connection may become intermittently disconnected in some mobile phones. Follow these steps to tr again.

Turn the Bluetooth

function within the

mobile phone OFF/ON and tr

2. Turn the mobile phone pow y again.

and tr

Completely remove the mobile phone

er OFF/ON

y again.

battery, reboot, and then again.

Reboot the Multimedia System and tr

y again.

Delete all paired devices from both of Phone and Head Unit sides and then try again

• The Handsfree call volume and quality may differ depending on the mobile phone.

•

airing Bluetooth

other Bluetooth

devices and use of

features are not supported when the vehicle is in motion. Fo saf

ety, please first park your vehicle.

If you continue having issue download-

• ing your contacts to your vehicle, contact your mobile phone provider.

Before Using the Bluetooth® Handsfree I 3-3

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-3K_UMa_UVO3[USA_EU]AV_PART3.indd 3-3 2016-01-27 오후 4:24:332016-01-27 오후 4:24:3

Bluetooth Connection

Pairing a New Device

Before you can use the Bluetooth feature, you must first pair/connect your mobile phone to your car. Up to 5 Bluetooth devices can be paired. Only one Bluetooth device can be connected at a time.

Pairing a New Device by Selecting Phone/Call

Press the

the steering wheel control. ▶ Pair your car after your mobile phone detects the Bluetooth device. ▶ Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.

PHONE

key or key in

Pairing a New Device Through the Phone Settings

Press the Select

Add New

SETUP

key. ▶ Select

Bluetooth Connection

. ▶ Pair your car after your mobile

phone detects the Bluetooth device. ▶ Enter the passkey or accept the authorization popup. ▶ Connect Bluetooth.

The default passkey is 0000. The vehicle name above is an example. Check the actual information on the product.

Phone

. ▶

. ▶ Select

Connecting Bluetooth Devices

Connects the Bluetooth devices that you add.

Connecting Devices by Selecting Phone/Call

Press the

the steering wheel control. ▶ Select the name of the device to connect. ▶ Connect Bluetooth.

PHONE

key or key in

3-4 I Bluetooth

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-4K_UMa_UVO3[USA_EU]AV_PART3.indd 3-4 2016-01-27 오후 4:24:332016-01-27 오후 4:24:3

Connecting Devices Through the Phone Settings

Press the Select

SETUP

key. ▶ Select

Bluetooth Connection

name of the device to connect. ▶ Connect Bluetooth.

Phone

. ▶

. ▶ Select the

Disconnecting Bluetooth Devices

Disconnects Bluetooth devices that are connected.

SETUP

Press the Select

Bluetooth Connection

key. ▶ Select

name of the device to disconnect.

Phone

. ▶

. ▶ Select the

Deleting Bluetooth Devices

Deletes the Bluetooth devices that you added. Note that deleting a Bluetooth device will delete all Call History and Contact Info downloaded along with it.

Press the Select

Delete Devices

SETUP

Bluetooth Connection

. ▶ Select the device name

to delete. ▶ Select

key. ▶ Select

Delete

Phone

. ▶ Select

. ▶

Bluetooth Connection I 3-5

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-5K_UMa_UVO3[USA_EU]AV_PART3.indd 3-5 2016-01-27 오후 4:24:342016-01-27 오후 4:24:3

Bluetooth Phone

Phone Status Icons

Shows the current phone status in the right top of the display.

Icons Description

You can use Bluetooth phones when a Bluetooth Hands-free connection is established.

You can use Bluetooth audio features when a Bluetooth audio connection is established.

You can use Bluetooth phones and audio features when both Bluetooth Hands-free and audio connections are established.

Call signal strength indicator

Battery level of the Bluetooth devices connected

Downloading Call History list

Downloading Contacts

In a Bluetooth phone call

Microphone muted

Information

• The battery level icon and the call signal

strength indicator may not be supported in some Bluetooth devices.

• The battery level may differ from the actual

level remaining

3-6 I Bluetooth

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-6K_UMa_UVO3[USA_EU]AV_PART3.indd 3-6 2016-01-27 오후 4:24:352016-01-27 오후 4:24:3

Dial

Dials a call after the Bluetooth devices are connected.

PHONE

• Press

the

the steering wheel control.

•

You can also select

Phone

then

key or key in

All Menus

icon.

icon ▶ and

Name Description

Use the keypad to enter the phone number that you

Keypad

Delete

Settings

Call

Information

• Some types of mobile phones may not

support the Speed Dial function.

want to call. Press and hold the last number of a speed dial to dial a number that you added to the Speed Dial list in the phone

Deletes the numbers that you entered.

Moves to a screen of Phone Settings.

Makes a call after you dial a number and select CALL. If the number is listed in Dialed Calls, you can select the number and press CALL to automatically dial that number again.

Accept/Reject Call

If there is an incoming call after you made a Bluetooth connection, a popup message will appear.

Name Description

Reject

Information

• In some mobile phones, the caller's number

may not be displayed, and the Reject f ma

y not be supported.

Answers the call.

Ignores the call.

eature

Bluetooth Phone I 3-7

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-7K_UMa_UVO3[USA_EU]AV_PART3.indd 3-7 2016-01-27 오후 4:24:352016-01-27 오후 4:24:3

Using the Menu During a Phone Call

When making a call, you can use the following menu items.

Name Description

Use Private

End

Contacts

Outgoing Volume

Keypad

Switch

Switches a voice call from the car Hands-free to the mobile phone.

Ends a call.

Displays the Contacts list.

Displays the Mic Volume settings. You can adjust the in-call volume that the other party hears (level 1 - 5).

Moves to a screen for entering ARS numbers.

Switches to a call on hold, if any. You can also switch calls by selecting the number in the Information Display. The Switch function switches the current call to a waiting call in order to answer a new incoming call.

Information

• If the caller's number is listed in Contacts, the

caller's name will be displa only the number will be displayed. In some mobile phones, the phone number may not be displayed.

• In some Bluetooth devices, the Use Private

eature may not be supported.

• In some Bluetooth devices, the Switch feature

y not be supported.

• During a phone call on a Bluetooth Hands-

, you cannot access other modes, such as

free Radio and Settings.

• Depending on handset types, the in-call

olume the other party hears may differ.

v other par loud, adjust the mic volume.

ty hears your voice too low or too

yed. Otherwise,

If the

3-8 I Bluetooth

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-8K_UMa_UVO3[USA_EU]AV_PART3.indd 3-8 2016-01-27 오후 4:24:362016-01-27 오후 4:24:3

Call History

Press the

PHONE

key, and then

Call History

Name Description

All

Dialed

Received

Missed

Lists the all call history.

Lists the calls that you made.

Lists the calls that you have received.

Lists the calls you missed.

Displays all of your call

Call History

history. Select from the list to dial the number.

Displays the details of

Information

your call history information.

Downloads the call his-

Download

tory information from your mobile phone.

Dials the selected

Call

number in your Call History Information.

Goes to the Contact

Contacts Info

Information screen if the number has been stored.

Information

• In some mobile phones, call records may

not be added to your Call History.

• Calls from restricted ID's are not added to

your Call History Information.

• Up to 50 calls can be added in each Dialed

Calls/Received Calls/Missed Calls list.

• The durations of each dialed/received call are

not displayed in your car's Call History list.

• While the call history download is in progress,

the status bar displays an icon ( ).

• If the call history download is turned off

on the Bluetooth device, the call history download will fail.

• Some devices require a device authentication

for downloading your call history. If download fails, check if the Bluetooth settings or display status are normal.

• Some devices do not support call history

download. Check if your Bluetooth device supports download feature. For details regarding Bluetooth-supported devices and their functional compatibility, visit http://www. kia.com

Bluetooth Phone I 3-9

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-9K_UMa_UVO3[USA_EU]AV_PART3.indd 3-9 2016-01-27 오후 4:24:372016-01-27 오후 4:24:3

Contacts

Press the

PHONE

key, and then

Contacts

Name Description

Contacts List

The list of Contacts. Select from the list to dial the number.

Information

Displays contact information.

Downloads contacts

Download

from your mobile phone.

Search by Name

Search by Number

Add to Favorites

Searches Contacts for the name that you enter.

Searches Contacts for the number that you enter.

Adds a phone number to Favorites.

Information

• Up to 5000 phone numbers can be

downloaded from a single de

vice.

• You cannot edit or delete downloaded

phone numbers from your car.

• Contacts can be viewed only when the

Bluetooth device is connected.

• Even if the Bluetooth de

the do

wnloaded data will remain. (Note that deleting a paired phone will also delete all downloaded Contacts and Call History data)

• Downloaded phone numbers may be lost

depending on the condition of the head unit. Keep your important data in a safe place.

• Contacts from both the SIM card and your

, paired Bluetooth

vice is disconnected,

mobile phone are downloaded at the same time b

y default.

• The status bar displays a ( ) while

downloading contacts.

• The download will not be available if the

contacts download function is tur y

our Bluetooth device.

ned off on

3-10 I Bluetooth

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-10K_UMa_UVO3[USA_EU]AV_PART3.indd 3-10 2016-01-27 오후 4:24:382016-01-27 오후 4:24:3

• Some devices require a device authentication

or downloading your contacts. If download fails,check your phone screen and conﬁ rm the download if necessary.

• Some devices do not support contacts

wnload feature. Check if your Bluetooth

do device supports contacts download. For Bluetooth supporting devices details and compatibility, visit http://www.kia.com

Favorites

Press the

PHONE

key, and then

Name Description

Lists the phone num-

Favorites

bers saved as Favorites. Select from the list to dial the number.

Add New

Adds a new number to Favorites.

Deletes numbers

Delete Items

that you select from Favorites.

Delete All

Deletes all of the numbers from Favorites.

Favorites

Bluetooth Phone I 3-11

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-11K_UMa_UVO3[USA_EU]AV_PART3.indd 3-11 2016-01-27 오후 4:24:392016-01-27 오후 4:24:3

MEMO

K_UMa_UVO3[USA_EU]AV_PART3.indd 3-12K_UMa_UVO3[USA_EU]AV_PART3.indd 3-12 2016-01-27 오후 4:24:402016-01-27 오후 4:24:4

part.4

The 911 Connect feature may not operate in the following situations

UVO eServices

About UVO eServices

Before using UVO eServices

Connecting Bluetooth

Pair a device from Bluetooth-enabled phone

Connecting to smartphone via USB

911 Connect

Roadside Assist

Vehicle Diagnostics

My Car Zone

Parking Minder

eServices Guide

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-1K_UMa_UVO3[USA_EU]AV_PART4.indd 4-1 2016-01-27 오후 4:25:002016-01-27 오후 4:25:0

UVO eServices

The 911 Connect feature may not operate in the following situations

When the vehicle ignition is not turned on.

When the phone Bluetooth® feature is set to off.

When the phone Bluetooth® cannot be connected or becomes

disconnected.

When there are no phones paired with the vehicle.

When cellular service is unavailable.

When the power turns off due to phone power (battery) issues.

When a Bluetooth® device without phone feature support has

been connected, such as an MP3 device.

When the system is booting.

When the system power supply is unstable.

When the attempted call is blocked due to user operations.

When the 9-1-1 call is unstable due to phone or other commu-

nication network issues.

When the call feature is not operating due to phone settings set

by the user.

When the phone cannot be controlled via Bluetooth® due to

phone specifications or characteristics.

4-2 I UVO eServices

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-2K_UMa_UVO3[USA_EU]AV_PART4.indd 4-2 2016-01-27 오후 4:25:012016-01-27 오후 4:25:0

Using UVO eServices and Precautions

Download the UVO eServices App and install it on your smartphone.

The app can be downloaded from your smartphone’s app store.

For using UVO eServices call features such as 911 Connect,

Roadside Assist and eServices Guide, a smartphone must be connected with the vehicle via Bluetooth. Pair and connect your smartphone with the vehicle. For information on connecting your Bluetooth device, refer to the smartphone user’s manual and instructions on the Phone Help screen on your radio. Up to five Bluetooth devices can be paired to the vehicle and only one device can be connected at a time.

For using data communication of Vehicle Diagnostics, Parking

Minder, and My Car Zone, smartphone must be connected with the vehicle via USB cable.

※

The use of genuine cable is recommended. (The use of

other products may result in abnormal or non-proper operation.)

Some UVO eServices features will only be available when your

smartphone is connected with the vehicle via USB and the UVO eServices App is running.

UVO eServices may not operate properly with incompatible

smartphones. To view the list of compatible smartphones, please visit MyUVO.com

Communication between the vehicle and smartphone app may

temporarily disconnect depending on the phone state.

If the feature is not operating properly, you may need to reset

the UVO eServices App or the smartphone and try again according to the following steps.

1. Try feature again in the Head Unit

2. Restart smartphone app

3. Re-connect Bluetooth and USB cable

4. Reset smartphone 5. Delete Device and pair again

Some services use the customer’s mobile phone data plan for

data communication. Therefore, the features will function in accordance with the cellular plan.

Use of the most up-to-date app version is recommended.

For smartphone related inquiries, please visit MyUVO.com.

Using UVO eServices and Precautions I 4-3

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-3K_UMa_UVO3[USA_EU]AV_PART4.indd 4-3 2016-01-27 오후 4:25:022016-01-27 오후 4:25:0

About UVO eServices

UVO eServices provides the following features through Bluetooth and/or USB connection to your smartphone.

Name Connection Description

911 Connect

Roadside Assist

Vehicle Diagnostics

My Car Zone

Parking Minder

eServices Guide

BT & USB

USB

If an airbag deploys, your vehicle automatically initiates a call to 9-1-1 and sends your vehicle’s location information to the 9-1-1 operator.

If a diagnostic issue exists, you can connect with a Roadside Assist.

Informs you if there is a diagnostic issue found in your vehicle. If an issue is found, you can contact a call center through Roadside Assist or reserve an appointment with your preferred Kia dealer through Schedule Service.

Keeps track of predefined triggered alerts such as Speed Alert and Curfew Limit Alert from the My Car Zone feature.

Saves the location of your parked vehicle on your UVO eServices smartphone app. You can check where your vehicle is parked through the UVO eServices App on your smartphone.

Receive guidance on how to use UVO eServices.

Information

• 24-hour Roadside Assistance is a

America, Inc. Certain limitations apply. Coverage details are available in the Kia Warranty and Consumer Information Manual. For access to Enhanced Roadside Assistance, a conn Bluetooth within the cellular service coverage area is required.

service plan provided by Kia Motors

ected mobile phone via

To use UVO eServices, the following conditions must be met.

1. The UVO eServices smartphone app must be installed and you must log in using your MyUVO account credentials.

2. The smartphone must be connected via Bluetooth and USB cable to the vehicle.

3. Once this is complete, eServices must be activated.

4-4 I UVO eServices

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-4K_UMa_UVO3[USA_EU]AV_PART4.indd 4-4 2016-01-27 오후 4:25:022016-01-27 오후 4:25:0

Before using UVO eServices

Installing the UVO eServices App on your smartphone

1. Download and install the UVO eServices App on your smartphone. The app can be downloaded from the Apple App Store or Google Play.

2. Register your vehicle and account at MyUVO.com Note: MyUVO.com is accessible from your phone’s browser.

3. Start the UVO eServices App on your smartphone and log in.

Connecting Bluetooth

Press the key on the steering wheel

SETUP

▶

PHONE

key on the head unit.

Phone

Bluetooth Connection

▶

or press the Press

Pair a device from Bluetooth-enabled phone

1. Turn on the Bluetooth feature on your smartphone’s Bluetooth settings screen.

2. Search Bluetooth devices on your

smartphone.

3. Select the Vehicle Name on the phone

that matches the name shown on the screen.

4. Verify the passkey shown on the touch-

screen. If the phone supports SSP, check the passkey on your Bluetooth confirm the authentication.

device and

Pair a device from Bluetooth-enabled phone I 4-5

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-5K_UMa_UVO3[USA_EU]AV_PART4.indd 4-5 2016-01-27 오후 4:25:022016-01-27 오후 4:25:0

Connecting to smartphone via USB

1. Connect your smartphone with the vehicle via USB cable.

NOTICE

• For smartphone related inquiries, please visit

MyUVO.com.

Activating UVO eServices

Press the

Vehicle Diagnostics

Parking Minder

UVO

key, then press the

My Car Zone

button.

Press the

Yes

button, then the UVO

eServices activation process will begin.

NOTICE

• Before activating UVO eServices, ensure

your phone is connected to the vehicle via USB cable.

4-6 I UVO eServices

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-6K_UMa_UVO3[USA_EU]AV_PART4.indd 4-6 2016-01-27 오후 4:25:042016-01-27 오후 4:25:0

911 Connect

If an airbag deploys, your vehicle automatically initiates a call to 9-1-1 and sends your vehicle’s location information to the 9-1-1 operator.

The 911 Connect feature is available only when the mobile phone is connected via Bluetooth. By default, this feature is turned off. To turn it on, you must turn it on in the eServices Settings menu. By enabling this feature, you are agreeing to the 911 Connect terms of use.

A (

) icon is displayed at the top of the touch screen as shown below when phone is connected to UVO eServices system via Bluetooth and the 911 connect feature is turned on.

Initiating a 911 Call

If an airbag deploys, the following screen is displayed and a call is automatically placed to 9-1-1 after 10 seconds.

Once a call is connected with a 9-1-1 operator, it is possible to request emergency services to be dispatched to your location.

911 Connect I 4-7

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-7K_UMa_UVO3[USA_EU]AV_PART4.indd 4-7 2016-01-27 오후 4:25:062016-01-27 오후 4:25:0

The 9-1-1 operator may request information on the current location of your vehicle. When the 9-1-1 operator requests your vehicle location, “Sending Location” is displayed on the screen and the vehicle location is automatically sent to the 9-1-1 operator.

When the 9-1-1 operator attempts to talk to the driver again, the call time is displayed and allows the driver to speak with the 9-1-1 operator.

Roadside Assist

If there is any issues in the vehicle, you can connect with a Roadside Assist agent. The Roadside Assist feature can be used only when your phone is connected via Bluetooth.

Press the

4-8 I UVO eServices

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-8K_UMa_UVO3[USA_EU]AV_PART4.indd 4-8 2016-01-27 오후 4:25:062016-01-27 오후 4:25:0

UVO

key ▶

Roadside Assist

Vehicle Diagnostics

Conducting Vehicle Diagnostics

Vehicle Diagnostics is available only when the ignition is turned on and the vehicle is parked. It also requires that UVO eServices is activated, and the Phone is connected via USB cable before starting Vehicle Diagnostics.

Press the

UVO

key

Vehicle Diagnostics

▶

The Vehicle Diagnostics process will begin. When a diagnostics check is in progress, keep the vehicle in park with the ignition on. To cancel diagnostics, press the

Cancel

button on the touch screen or

any hardkey.

If diagnostic issues are found, press the

Send Report

account or press the

button to send to your MyUVO

Schedule Service

but-

ton to schedule an appointment with your preferred or nearby Kia dealer.

Vehicle Diagnostics I 4-9

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-9K_UMa_UVO3[USA_EU]AV_PART4.indd 4-9 2016-01-27 오후 4:25:072016-01-27 오후 4:25:0

Schedule Service

When scheduling an appointment using

Schedule Service

the

Preferred

button will allow you to request an

appointment with your preferred Kia dealer and send your vehicle’s diagnostics information. Pressing the

to request an appointment with the nearest Kia dealer and send your vehicle’s diagnostics information.

button, pressing the

Nearest

button will allow you

Press the

Preferred

Nearest

button.

Request an appointment with Preferred or Nearest Kia Dealer and send your vehicle’s diagnostics data.

Send Report

Press the

nostics result screen.

Vehicle Diagnostics Data is transmitted to your account and you can see the report on MyUVO.com

Send Report

in the vehicle diag-

4-10 I UVO eServices

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-10K_UMa_UVO3[USA_EU]AV_PART4.indd 4-10 2016-01-27 오후 4:25:082016-01-27 오후 4:25:0

Even if diagnostic issues are not found after Vehicle Diagnostics, it is recommended that you send the diagnostic results to your MyUVO account. Press the

Send Report

button to send the

diagnostics results to your MyUVO account.

Scheduled Diagnostics

If you have set up Scheduled Diagnostics on your UVO eServices App, a vehicle diagnostics check will automatically start on the day you selected. On the date of the Scheduled Diagnostics, the following window will be displayed.

Press the

Send Report

button to see the

Vehicle Health Report on MyUVO.com.

Press the

Yes

button on the touch screen

to proceed with diagnostics.

Vehicle Diagnostics I 4-11

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-11K_UMa_UVO3[USA_EU]AV_PART4.indd 4-11 2016-01-27 오후 4:25:092016-01-27 오후 4:25:0

Automatic Diagnostics

If a critical diagnostics issue with your vehicle’s powertrain is detected, Automatic Diagnostics will be notified.

NOTICE

• The screen messages differ based on the

vehicle diagnostics severity. Ensure your phone is connected to the system via USB

cable before using

Send Report

Schedule Service

and

My Car Zone

My Car Zone is a feature that provides alerts and driving history for Curfew Limit Alerts and Speed Alerts set by the user.

Name Description

Curfew Limit Alerts are

Curfew Limit Alert

Speed Alert

My Car Zone features are supported only when UVO eServices has been activated.

alerts that are triggered when a driver is driving within a predefined time range.

Speed Alerts are alerts that are triggered when a driver exceeds the predefined maximum speed.

Press the

UVO

key ▶

My Car Zone

Curfew Limit Alerts History

Speed Alerts History

4-12 I UVO eServices

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-12K_UMa_UVO3[USA_EU]AV_PART4.indd 4-12 2016-01-27 오후 4:25:102016-01-27 오후 4:25:1

Curfew Limit Alert

Speed Alert

Curfew Limit Alert

You can check the Curfew Limit Alert history for a list of past triggered curfew alerts.

Speed Alert

You can check the Speed Alert history for triggered speed limit alerts of the vehicle.

Name Description

Phone

Alert Time

Duration

Driving Time

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-13K_UMa_UVO3[USA_EU]AV_PART4.indd 4-13 2016-01-27 오후 4:25:122016-01-27 오후 4:25:1

Name of phone connected upon triggered curfew limit

Initial alert time

Total duration of driving while curfew limit was triggered

Total driving time from turning ignition on until turning ignition off

Name Description

Phone

Max. Speed

Alert Time

Duration

Name of phone connected upon triggered speed limit alert

Maximum vehicle speed upon triggered speed limit alert

Time from first triggered alert until last triggered alert

Total triggered alert time from turning ignition on to turning ignition off

My Car Zone I 4-13

To check My Car Zone alert history from your smartphone, you must first send the alert history to your MyUVO account.

Parking Minder

Sending Parking Location

The location where your vehicle is currently parked can be sent to your smartphone.

Ensure that your smartphone is connected via USB and the UVO eServices App is running before using this feature.

After parking the vehicle, press the

UVO

key ▶

vehicle’s location to your smartphone.

Parking Minder

to send the

Once the parking location has been sent, you can view your vehicle’s location from the UVO eServices App on your smartphone.

NOTICE

• When the parking location is being sent, do

not drive the vehicle. Ensure that you have logged into the UVO eServices App, and your phone is connected to the multimedia system via USB cable.

• When ignition is turned off while the phone is

arking Minder can be

connected via USB transferred automatically if the option is set up in UVO eService Settings

, P

4-14 I UVO eServices

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-14K_UMa_UVO3[USA_EU]AV_PART4.indd 4-14 2016-01-27 오후 4:25:132016-01-27 오후 4:25:1

eServices Guide

eServices Guide provides guidance on how to use UVO eServices.

This feature is only available when the mobile phone is connected via Bluetooth.

UVO eServices Settings

Refer to

SETUP

▶

UVO eServices

Press the

UVO

key ▶

eServices Guide

eServices Guide I 4-15

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-15K_UMa_UVO3[USA_EU]AV_PART4.indd 4-15 2016-01-27 오후 4:25:142016-01-27 오후 4:25:1

MEMO

K_UMa_UVO3[USA_EU]AV_PART4.indd 4-16K_UMa_UVO3[USA_EU]AV_PART4.indd 4-16 2016-01-27 오후 4:25:142016-01-27 오후 4:25:1

part.5

Voice Recognition

What is Voice Recognition?

Precautions Required for Successful Voice Recognition

Starting/Ending and Setting Voice Recognition

Voice Recognition Screen Overview

Voice Commands

Siri Eyes Free

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-1K_UMa_UVO3[USA_EU]AV_PART5.indd 5-1 2016-01-27 오후 4:25:262016-01-27 오후 4:25:2

Voice Recognition

What is Voice Recognition?

The voice recognition feature operates the multimedia system by recognizing voice commands and enables hands-free operation of the system while you are driving your car. Not all possible voice commands are recognized by the system due to technological limitations. To make up for these limitations, the system displays the voice commands that are available for you to use. There are errors in communication between people. Likewise, voice recognition sometimes misunderstands your voice command in some circumstances. If this happens, either check the screen for the available options and say the command again, or manually select and press the button for the corresponding command on the screen.

Precautions Required for Successful Voice Recognition

1. Voice recognition supports only the commands that are displayed on the screen and written in the User's Guide.

2. To ensure the correct recognition and execution of your command, say your command when you hear the beep after a voice prompt.

3. Voice recognition automatically ends if:

1) A call is incoming or outgoing

2) A media device (USB or iPod, etc.) is

connected or disconnected

3) The rear view camera is operated

4) The car engine starts or stops

5) A system key, such as

MEDIA

key is selected

RADIO

key

4. The microphone used for the voice recognition system is located in the headliner directly above the driver's head. To make your commands better understood, keep your body straight in the driver's seat when speaking the command.

5. Speaking naturally and clearly will ensure better recognition of your voice commands.

6. In the following cases voice recognition will be affected by ambient noise.

1) The sound of the wind if any window or the sun roof is open.

2) High speed blower from the air vents. Set climate control to blow lower than level 3.

3) Vibrations from passing through a tunnel.

4) Vibrations from driving on an uneven road.

5) Storms and heavy rain.

5-2 I Voice Recognition

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-2K_UMa_UVO3[USA_EU]AV_PART5.indd 5-2 2016-01-27 오후 4:25:272016-01-27 오후 4:25:2

Starting/Ending and Setting Voice Recognition

Starting Voice Recognition

Press the key briefly (less than 0.8

seconds) on the steering wheel control to activate voice recognition.

Ending Voice Recognition

1. Select “Exit” to the left of the bottom to end voice recognition.

2. Press and hold (more than 0.8 seconds) the

wheel control to end voice recognition.

key on the steering

Combining Voice Recognition with On-Screen Commands

After pressing the key, say a com-

mand after the beep. The voice recognition system will execute the desired operation after understanding the command. Alternatively, you may touch any of the corresponding Frequently Used Commands on the screen while the Voice Recognition system is in operation.

Combining voice recognition with available on-screen commands is useful when the system is taking longer than expected or the voice command did not execute as desired.

Starting/Ending and Setting Voice Recognition I 5-3

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-3K_UMa_UVO3[USA_EU]AV_PART5.indd 5-3 2016-01-27 오후 4:25:272016-01-27 오후 4:25:2

Extending the Listening Time

When the system is waiting for your command, after the voice prompt and beep have been heard, if you press the

key (shorter than 0.8 seconds), then the beep will sound again and standby mode will restart.

When activated, voice recognition waits for your command for 5 seconds. If you say nothing for 5 seconds, a voice prompt will ask for your command again.

5-4 I Voice Recognition

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-4K_UMa_UVO3[USA_EU]AV_PART5.indd 5-4 2016-01-27 오후 4:25:442016-01-27 오후 4:25:4

Skipping Prompt Messages

When you hear the prompt message, press the

wheel control to skip the message and go directly to listening mode to say your command.

This results in faster operation when you feel the message is too long or you already know the command to use.

Information

• Refer to Part 8 for instructions on how to

change the Voice Recognition Settings.

key on the steering

Adjusting Voice Recognition Volume

During voice recognition, rotate the volume knob to adjust the message volume.

Starting/Ending and Setting Voice Recognition I 5-5

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-5K_UMa_UVO3[USA_EU]AV_PART5.indd 5-5 2016-01-27 오후 4:26:092016-01-27 오후 4:26:0

Voice Recognition Screen Overview

Start Screen

Name Description

Most frequently used commands

Not available command

Displays the six most frequently used commands.

Displays commands that are not available due to a failure in meeting the conditions for using them and thus need additional settings. The conditions required for using them will be described briefly under each command.

Name Description

Voice recognition status icons

Recognized results

User's speaking volume being recognized

Help

Exit

Standby Voice guidance Voice command process

Displays the voice recognition result.

Displays the voice command volume in real time.

Displays all available help commands in a tree format.

Ends the voice recognition.

Help Display

Name Description

• Shows the available

Command list

How to use for selected item

How to use in general

commands.

• Select or say a command to display additional commands in detail.

This section shows how to use voice recognition for the selected item.

This section displays how to use voice recognition in general.

5-6 I Voice Recognition

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-6K_UMa_UVO3[USA_EU]AV_PART5.indd 5-6 2016-01-27 오후 4:26:112016-01-27 오후 4:26:1

Instructions for Using Voice Recognition

Name Description

Detail

instruction

Close button

This section describes how to use voice recognition in detail.

Closes the screen and restarts voice recognition.

Information

• In the instructions screen, no voice is

recognized, so you must manually issue commands. Because the instructions screen displays a lot of content, you can not view it while driving for safety precautions.

Voice Recognition Screen Overview I 5-7

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-7K_UMa_UVO3[USA_EU]AV_PART5.indd 5-7 2016-01-27 오후 4:26:122016-01-27 오후 4:26:1

Voice Commands

Types of Commands

Voice recognition commands are classified as “Global Commands” and “Local Commands”.

1. Global Commands (

ately after activating voice recognition.

2. Local Commands (

multimedia or Bluetooth function is running, or displayed on the screen, after activating voice recognition.

Call Commands

* Check the following before using call commands:

1. Voice commands related to phone calls can be used after connecting a Bluetooth device.

2. To call a person, for example “Call <John Smith>” whose name is listed in Contacts, you must first download the Contacts list. For details on downloading contacts, see “Part 3. Using Bluetooth > Chapter 3. Bluetooth Phone > 3.10 Contacts”.

3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you cannot make a call by name yet. The time it takes to convert voice data may vary depending on the number of Contacts downloaded on the phone.

): Commands that can be used immedi-

●

): Commands that can be used when a

○

Command Operation

●

Call

●

Call <Name>

Call <Name> on

●

Mobile

Call <Name> in

●

Office

Call <Name> at

●

Home

Call <Name> on

●

Other

●

Dial Number

●

Dial <Phone #>

●

Redial

●

Call History

Displays downloaded Contacts, after this you can make a call by saying the name.

You can directly call a person by <Name> in the downloaded Contacts.

You can call a person <name> directly to the number that is saved as “Mobile” in the downloaded Contacts. e.g.) Call “John Smith” on Mobile

You can call a person <name> directly to the number that is saved as “Office” in the downloaded Contacts. e.g.) Call “John Smith” in Office

You can call a person <name> directly to the number that is saved as “Home” in the downloaded Contacts. e.g.) Call “John Smith” at Home

You can call a person <name> directly to the number that is saved as “Other” than “Mobile, Home, or Office” in the downloaded Contacts. e.g.) Call “John Smith” on Other

Displays a screen where you can say a phone number to dial.

You can directly say the number to call. e.g.) Dial 111 555 1234

Directly calls at the number that you last dialed.

Displays your Call History, where you can say the list number to make a call.

5-8 I Voice Recognition

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-8K_UMa_UVO3[USA_EU]AV_PART5.indd 5-8 2016-01-27 오후 4:26:122016-01-27 오후 4:26:1

Radio Commands

Command Operation

●

Radio

●

FM Plays FM radio.

●

<87.5~107.9>

●

SiriusXM Plays SiriusXM™ radio.

SiriusXM

●

<0~999>

●

AM Plays AM radio.

●

AM <530~1710>

○

Preset <1~40> Tunes to your preset stations (1 to 40).

Channel

○

<0~999>

Plays the most recent radio channels from FM, AM, and SiriusXM™.

Tunes to FM <Frequency> according to what you say. e.g.) FM 87.5: FM eighty seven point five

Tunes to SiriusXM™ Channel <Channel Number> according to what you say. e.g.) SiriusXM 23: SiriusXM Twenty three

Tunes to AM <Frequency> according to what you say. e.g.) AM 530: AM Five Thirty

In SiriusXM™ Radio mode, turns on the <Channel Number> that you say.

Voice Commands I 5-9

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-9K_UMa_UVO3[USA_EU]AV_PART5.indd 5-9 2016-01-27 오후 4:26:122016-01-27 오후 4:26:1

Media Commands

* Check the following before you use media commands.

1. If no media is connected or if no playable files exist at the time when you use these commands, a voice message will tell you that this is not available.

2. If you say the name of the media that is currently playing again, then that media will continue playing. e.g.) Saying “USB” while USB content is playing.

Command Operation

●

Music Continues the last media you played.

●

iPod

●

USB

●

Bluetooth Audio

●

AUX

●

My Music Plays My Music files stored in the system.

●

Pandora Radio

CD Plays the content of the CD currently inserted.

Plays the iPod currently connected. This will work the same when an iPhone is connected. If a USB is connected, then it will be played instead of the iPod.

Plays the music on the USB currently connected. If an iPod is connected, then the iPod will be played instead of the USB.

Plays the music on the Bluetooth phone currently connected. This may not be supported depending on the Bluetooth connection status.

Plays external devices that are currently connected.

Plays Pandora Radio that is currently connected.

5-10 I Voice Recognition

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-10K_UMa_UVO3[USA_EU]AV_PART5.indd 5-10 2016-01-27 오후 4:26:122016-01-27 오후 4:26:1

1. Audio CD Command

Command Operation

○

Play

Pause

Tr a ck <1~99>

Shuffle

Shuffle Off

Repeat

Repeat Off

Plays a paused track. Maintains the current settings during playback.

Pauses a track that is currently playing. Maintains current settings while paused during playback.

Plays a desired track number.

Plays tracks or files randomly. Maintains current settings during shuffled playback.

Cancels Shuffle and plays tracks sequentially. Maintains current settings during sequential playback.

Plays the current track repeatedly. Maintains the current settings during repeat playback.

Cancels Repeat and plays multiple tracks or files. Maintains current settings during multiple track playback.

2. MP3 CD/USB Music/iPod/My Music Command

Command Operation

○

Play

Pause

Shuffle

Shuffle Off

Repeat

Repeat Off

Plays a selected file. Maintains the current settings during playback.

Pauses a file that is playing. Maintains current settings while paused during playback.

Plays tracks or files randomly. Maintains current settings during shuffled playback.

Cancels Shuffle and plays tracks sequentially. Maintains current settings during sequential playback.

Plays the current track or file repeatedly. Maintains the current settings during repeat playback.

Cancels Repeat and plays multiple tracks or files. Maintains current settings during multiple track playback.

Voice Commands I 5-11

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-11K_UMa_UVO3[USA_EU]AV_PART5.indd 5-11 2016-01-27 오후 4:26:122016-01-27 오후 4:26:1

3. Pandora Radio Command

Command Operation

○

Skip Moves to the next track.

○

Thumbs up

○

Thumbs down

○

Play

○

Pause

○

Shuffle

If you like the genre of the music currently playing, say “Thumbs up” so that more similar music will play.

If you don’t like the music currently playing, say “Thumbs down” to minimize the number of playbacks of similar genre music.

Plays a selected file. Maintains the current settings during playback.

Pauses a file that is playing. Maintains current settings while paused during playback.

Plays tracks or files randomly. Maintains current settings during shuffled playback.

4. Bluetooth audio/AUX Command

For Bluetooth audio and external devices (AUX), local commands are unavailable, including Play, Pause, Repeat and Shuffle.

UVO eServices Commands List

Command Operation

●

Roadside Assist Connect with a Roadside Assist agent.

Vehicle

●

Diagnostics

●

eService Guide

Informs you if diagnostic issues are found in your vehicle

Provides guidance on how to use UVO eServices

5-12 I Voice Recognition

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-12K_UMa_UVO3[USA_EU]AV_PART5.indd 5-12 2016-01-27 오후 4:26:122016-01-27 오후 4:26:1

Other Commands List (Commands used in List/Help)

Command Operation

●

Help

Line 1~4

○

(One~Four)

○

Yes/No

○

Previous/Next

○

Manual Input

○

Go Back Moves to the previous screen.

●

Exit Ends the voice recognition.

Moves to the voice recognition help screen. All available commands can then be identified and used.

When you cannot select a certain name, such as in Call History, you can select it using numbers. Simple numbers can be recognized, such as “One” or “Two”.

When voice recognition is activated, this command is used when an answer is requested for a confirmation question.

When four or more searched items are listed, you can move to the previous or next page using a voice command.

When Dial entry results are displayed, this command is used to search manually, rather than to search with a voice command. Voice recognition stops after this command is used.

Voice Commands I 5-13

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-13K_UMa_UVO3[USA_EU]AV_PART5.indd 5-13 2016-01-27 오후 4:26:122016-01-27 오후 4:26:1

Siri Eyes Free

How to start Siri

If you want to use Siri, you have to connect your iOS device to the Multimedia system through Bluetooth. (Please check whether your iOS device supports Siri and turning Siri On) Then you can use Siri while pressing and holding

key on the steering wheel.

How to use Siri

When you access the Siri screen while pressing and holding

steering wheel, you can press ton and then you can speak what you want. Note that the Multimedia system only supports “Phone” related functions. Other functions will be performed in your iOS device. If you press voice key quickly, Siri would re-start. If you hold down voice key, Siri would be terminated and the screen would go back to the previous screen. Eyes-Free mode would be activated automatically while you are driving. When shifting gears into P or putting the Parking brake on, Eyes-Free mode would be deactivated automatically.

key on the

Spea

but-

Information

• Functions and feedbacks from voice

commands via Siri are executed in the iOS device. If the iOS version is changed, the functions and response may be different according to the iOS device and the latest version.

5-14 I Voice Recognition

K_UMa_UVO3[USA_EU]AV_PART5.indd 5-14K_UMa_UVO3[USA_EU]AV_PART5.indd 5-14 2016-01-27 오후 4:26:132016-01-27 오후 4:26:1

part.6

Apps/Info

Start up

Pandora

SiriusXM™ Data

SoundHound

Android Auto

K_UMa_UVO3[USA_EU]AV_PART6.indd 6-1K_UMa_UVO3[USA_EU]AV_PART6.indd 6-1 2016-01-27 오후 4:26:432016-01-27 오후 4:26:4

HYUNDAI MOBIS ADC40A9AN, ADBB0A9AN User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual