Hyundai H-MS1118 User Manual [ru]

H-MS1118

МИКРОСИСТЕМА С DVDDVD MICRO SYSTEM

Руководство по эксплуатации Instruction manual

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents Before you start

Utilization of the product Important safeguards Supported formats

Connection

Video system connection Audio system connection

Operation

Control elements

Front panel Rear panel

Remote controller

Changing the battery

Button functions

Standby (Power)

Number buttons

Goto Setup

Play

Mute

PBC

Angle V-Mode Prog

OSD

Source select (DVD/Radio) Search Vol +/Radio Title/Copy Subtitle/Auto Audio/Memory Menu/MO/ST

Cursor buttons

Enter Reset L/R/St SLOW

USB

Step

Zoom

Repeat

A-B

Stop

System setup

General setup

Audio setup

Dolby Digital setup

Video setup

Preference setup

Radio operation

Various disc operation

MP3/JPEG/MPEG4 background

MP3/MPEG4 playback

USB operation

Ripping

Copying data

Deleting data from USB

General information

Handling compact discs

Cleaning discs

Accessories

Troubleshooting

Specification

10 10 10 10 10 10 10 10 10 10 10 10 11

11 11 11 11 11 11 11 12 12 13 13 13 14 14 14 14 15 15 16 16 17 17 17 17 18 19

Before you start

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Important safeguards

Alerts the user to the presence of

dangerous voltage within the

product’s enclosure.

Alerts the user to the presence of

important operating instructions.

To reduce the risk of electric shock

W a rning

or fire, do not open the cover. Refer

RISK OF ELECTRIC SHOCK

servicing to qualified service

DO NOT OPEN

personnel.

This mark indicates this unit belongs

to class 1 laser product.

• To prevent the risk of fire or electric shock, don’t allow water to come into contact with the device and don’t use the device in high humidity conditions.

• The device is equipped with high voltage components and a laser system, hence you shall not open the device and repair it by yourself. The laser beam is dangerous to eyes when the housing is removed. Don’t look at it.

• When the device is moved from cold premises to the warm room or vice versa, condensate may form on the laser head and the device may not operate properly. In this case please turn the device on for 1-2 hours without disc before playback to heat it to a proper operation temperature.

• Don’t try to manually open or close the

disc tray to load discs.

• Disconnect the receiver only when there is

no disc therein.

• If you are not going to use the device for a

long time disconnect it from the wall outlet.

• Before turning the device on, please make sure that you have connected it properly, adjust the volume of speakers and amplifiers of your system to the minimum. Adjust the volume as necessary only after normal playback has started to avoid damage of your audio system.

• Use supply sources of rated voltage, otherwise the unit may not function or may be damaged.

• Place the unit on a horizontal surface. Keep the unit ventilated. Don’t block the heat hole. Overheat may cause malfunction.

• Do not place any objects on the cover, this may make it function improperly (incorrect playback).

• Please place the unit in a dry and wellaired area. Do not place it near heating units or expose it to direct sunlight, mechanical vibration, humidity or excessive dust.

• Never use liquid detergents, abrasives or organic compounds (alcohol, gasoline, etc) to clean the unit body.

• All repairs and technical service should be made by qualified specialist from service centers.

All images provided herein are schematic drawings of real objects and may differ from their real images.

Before you start

Supported formats

Disc types Symbol Contents

DVD Compressed digital audio - video

MPEG4 (DivX) Compressed digital audio - video

CDDA Digital audio

MP3 Compressed digital audio

Kodak Picture CD Compressed digital static image

JPEG Compressed digital static image

CO MPAC T

Video CD/ VCD

DIGITAL VIDE O

VIDEO CD

Audio + Video

Connection

Video system connection

Before you start connection of external devices, ensure that power of the unit is switched off.

TV/monitor video input

YPbPr input

Y Cb/Pb Cr/Pr

Cb/Pb

Cr/P r

YPbPr output

composite video input

composite video output

HDMI input

HDMI output

SCART input

SCART output

Unit video output

Following video outputs are available in this unit.

Component video

Use a 3-core AV cable to connect the component outputs of this unit to the corresponding

inputs of a TV/monitor.

Composite video

Use the cable with yellow plug of an AV cable to connect the composite video output of this unit

to the video input of a TV/monitor.

SCART

Use a 21-pin SCART cable to connect the SCART output of this unit to the TV/monitor SCART

input.

The connection you should make depends on the TV/monitor input terminals. Don’t make all

the connections at the same time; otherwise the produced picture will be affected.

HDMI

HDMI can transmit both audio and video signals over a single cable. HDMI output presents the

highest possible resolutions and video quality. If an HDMI input is present on your television, use it.

Use a HDMI cable to connect the HDMI output of this unit to the HDMI input of a TV/monitor.

Connection

Audio system connection

TV/monitor/amplifier audio input

2-CH audio input

Coaxial audio

input

Speakers

4Ω

2-CH audio output

Coaxial audio

4Ω

Speakers

output

Unit audio output

Two types of audio output systems: analog audio and digital audio. Analog audio includes

2-channel stereo. Digital audio is coaxial output.

Stereo audio

Use a pair of AV cables (red for right/white for left) to connect the stereo audio outputs of this

unit to a TV or a stereo input of power amplifier.

Coaxial digital audio

Use the special coaxial cable to connect the coaxial output of this unit to the coaxial input of

power amplifier.

Speaker output

Use the specified cable in the accessories to connect this unit to the input of sound boxes.

The physical connection should accord to the audio output setup of this unit.

Control elements

Operation

Front panel

1. Display

2. (PLAY) button

3. VOLUME regulator

4. (PREVIOUS) button

5. STANDBY button

6. AUX IN

7. USB port

8. SOURCE button

9. (NEXT) button

10. (STOP) button

Not indicated: OPEN button (on the top panel)

Rear panel

1. SCART output

2. YPbPr/CbCr output

3. Coaxial digital output

4. L/R audio output

5. HDMI output

6. Video output

7. FM antenna jack

8. Speaker output

9. R/L line in

2 3

AUX

Operation

Remote controller (RC)

3 4

12 13

31 30 29

1. STANDBY button

2. Number buttons

3. GOTO button

4. button

5. SETUP button

6. PBC button

7. PROG button

8. OSD button

9. SEARCH ( / ) buttons

10. TITLE/COPY button

11. Cursor buttons ( / / / )

12. AUDIO/MEMORY button

13. SLOW button

14. S. EFFECT button

15. USB button

16. REPEAT button

17. STEP button

18. A-B button

19. button

20. ZOOM button

21. RESET button

22. MENU/RIPPING/MO/ST button

23. ENTER button

24. SUBTITLE/AUTO button

25. / buttons

26. VOL+/- buttons

27. SOURCE SELECT button

28. V-MODE button

29. button

30. ANGLE button

31. 10+ button

32. 0/10 button

33. L/R/ST button

Operation

Changing the battery

1. Remove the battery compartment cover

on the back of the RC.

2. Insert the batteries into the battery compartment making sure that the correct polarity is observed.

3. Install the cover back.

• Use two AAA/1.5V batteries for the RC. The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.

• Take the battery out of the RC if it is not used for a long time.

• Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.

Button functions

STANDBY (POWER)

When playing, press STANDBY button, the unit will be power-off and go to standby state. Press STANDBY button again, the unit will be switched on and start playing.

Number buttons

Press number buttons to input digits (channel numbers, playback time etc.).

GOTO

Press GOTO button to enter the menu enabling to select playback start time for the title, track or chapter, and to set some other playback parameters. To quit the menu press GOTO button.

SETUP

Press SETUP button, the on-screen setup

menu will be display.

(PLAY)

When playing the disc, press PLAY/PAUSE button on the unit or button on the RC to pause; press the button again to resume playback.

(MUTE)

Press button, no sound will be heard and MUTE will display on the TV screen. Press button again, and the sound will resume.

PBC

• Put the disc that supports PBC function into unit, press PBC button, TV display will show menu. You can change the page using

or buttons until you choose menu picture or title number that you need, then press the number button to choose. When PBC is turned off, disc will play according original order (This function is only available in discs that support VCD2.0).

ANGLE

When playing a disc with multi-angle, press

ANGLE button to change view angle.

V-MODE

Press V-MODE button to switch the video

output mode.

PROG

• If a disc has 2 or more tracks, chapters or titles, set up the playing order to your preference. Press PROG button to enter program menu.

• Press digit button to input the number of the track, title or chapter. If the programmed tracks are over ten, move the cursor to item and press ENTER button to go on programming (maximum 20 programmable items). Use cursor buttons to move the cursor to the START. Press ENTER button to start program play.

Operation

• When playing MP3 disc, programming is

not available.

• To quit the programming menu press PROG button or move the cursor on EXIT item and press ENTER button.

OSD

Press OSD button, the relative information of

the current playback will display on the screen.

SOURCE SELECT

Switch among various signal sources by

pressing SOURCE SELECT button on the RC.

SEARCH ( / )

• Press these buttons for fast forward or fast rewind; with each pressing the speed will change as follows: Х2 – Х4 – Х8 – Х16 – Х32

- normal.

• In Radio mode press the buttons to search strong signal stations manually.

VOL+/-

Press VOL+ to adjust volume up. Press VOL- to adjust volume down. You can also rotate VOLUME knob to adjust the sound volume level.

RADIO / (PREVIOUS/NEXT)

• In Radio mode press these buttons for

manual adjustment of stations with strong signal.

• When playing DVD disc, press button on the RC or PREVIOUS button on the panel to go to the previous chapter or press button on the RC or NEXT button on the unit to go to the next chapter.

• When playing SVCD, VCD, CD disc, press

button on the RC or PREVIOUS button on

the panel to go to the previous track or press

button on the RC or NEXT button on the

unit to go to the next track.

TITLE/COPY

• When playing DVD disc, press TITLE/ COPY button to open the title list (for some units – to open the title menu).

• When playing a file disc, press TITLE/

COPY button to open Copying menu.

SUBTITLE/AUTO

• When playing a disc with multi-subtitle function, press SUBTITLE/AUTO button to select a subtitle language.

• In Radio receiving mode use this button to automatically adjust and save all stations with strong signal. To stop the automatical search, press button.

AUDIO/MEMORY

• When playing DVD with more than one audio language, press AUDIO/MEMORY button to select you desired audio language.

• In Radio mode use this button to save the current station into the unit memory.

MENU/RIPPING/MO/ST

• When playing DVD disc, press MENU/ RIPPING/MO/ST button once to open the disc menu.

• In Radio mode use this button to select Mono or Stereo mode.

Cursor buttons

Press cursor buttons for navigation in

various menus.

ENTER

Press ENTER button to confirm input data or

selected options.

RESET

When the disc tray is open, press RESET button to restore all settings to the initial factory values (except Parental and Password items).

L/R/ST

Press this button repeatedly to select available audio channels (Left mono/Right mono/Mix-mono/Stereo) for VCD discs.

SLOW

While playback, press repeatedly SLOW button to select slow forward playback speed as follows: 1/2 => 1/4 => 1/8 => 1/16 =>

Operation

Normal.

S. EFFECT

Press the button to switch on/off the sound

effect.

USB

Insert the USB device into the slot on the front panel. Press USB button to play contents of the USB device.

STEP

When playing DVD, SVCD, VCD disc, press STEP button once, the picture changes to next frame. Press button to resume normal play.

ZOOM

• When playing DVD, SVCD, VCD disc, press ZOOM button to zoom in or zoom out the picture in the following order: x2 => x3 => x4 => x1/2 => x1/3 => x1/4 => normal.

• In zoom in mode, press cursor buttons to move the picture for viewing. The picture cannot be moved in zoom out mode.

REPEAT

Press REPEAT button to repeat a title,

chapter, track or the whole disc.

• When playing DVD disc, press REPEAT button continually to repeat chapter => title => all => repeat off.

• When playing SVCD, VCD, CD disc, press REPEAT button continually to repeat track => repeat all => repeat off (available only when PBC function is off).

• When playing MP3 disc, press REPEAT button continually to play folder => single => repeat track => repeat folder.

A - B

• Press A-B button at the start point (A) and the ending point (B) to select the repeat fragment.

• Press A-B button the third time to cancel fragment repeat and resume normal play.

When playing DVD/VCD/SVCD/CD disc, press button once, the unit will memorize the previous ending point. Press button to continue playback. Press button twice; not playback can only be resumed from the beginning of the disc.

System setup

1. Press SETUP button to enter the setup menu. In Setup menu, press SETUP button again to quit the setup page.

2. Use / buttons to choose a setup page: General setup page, Audio setup page, Dolby Digital setup, Video setup page, Preference page, Exit.

3. Press button to enter the setup page selected.

4. Use / buttons to select the option you want to adjust.

5. Press button to enter the adjustment list. Use / buttons to select the adjustment and press ENTER button to confirm

and button to return to options list.

6. To return to setup page list press button when in the option list.

The items in gray can’t be set up. The

setup is memorized and kept after power is off.

General setup page

General

General setup page

TV display Angle mark OSD language Closed captions Screen saver HDCD Last memory

Audio Dolby Video Preference

Operation

• TV DISPLAY

4:3 PanScan: When the unit connects to the normal TV set, the wide-screen image shows on the full screen, but some part is cut off.

4:3 LetterBox: When the unit connects to the normal TV set, the wide-screen image shows and black bars appear on the top and bottom of screen.

16:9: Use this item when the unit is connected with the wide screen TV set.

• ANGLE MARK

It will show the angle mark when playing DVD disc with multi-angle view if selecting On.

• OSD LANGUAGE

Select on-screen display language: English, Russian.

• CLOSED CAPTIONS

This function doesn’t work when the disc without caption. If the caption is Off, press SUBTITLE button on the RC to make caption on. The default setup is On.

• SCREEN SAVER

If the Screen saver is set On and the unit is switched on without a disc playing for several minutes, a moving picture appears on the screen, and the unit will go to standby mode after 20 minutes.

• HDCD

You can select the digital filter Off, 1x, 2x. The initial factory setup is Off.

• LAST MEMORY

When this function is on, the unit can memorize the time elapsed from the last time you played the disc. Then at the next playing, it will resume playing from the memorized time.

Audio setup page

General

Audio setup page

Analog audio Digital audio

Audio Dolby Video Preference

Analog audio setup page

General

Analog audio setup page

Downmix

Audio Dolby Video Preference

• DOWNMIX LT/RT: The audio out is Left and Right

channels format even if the original sound is

5.1CH format. Stereo: The audio out format is stereo even

if the original sound is 5.1CH format.

Digital audio setup

General

Digital audio setup

Digital output LPCM output

Audio Dolby Video Preference

• DIGITAL OUTPUT SPDIF/OFF: no digital signal out (coaxial

output off), only analog audio output.

SPDIF/RAW: digital signal output in the

original format recorded in the disc.

SPDIF/PCM: digital signal output in the

decoded PCM form.

• LPCM OUTPUT Select PCM frequency at 48 kHz or 96 kHz

Some amplifiers don’t support 96 kHz

sampling and cause coaxial output abnormal.

Dolby digital setup

+ 27 hidden pages