Hyundai H-LEDVD24V6 Instruction Manual

H-LEDVD24V6

LED TV with built-in DVD player

Телевизор цветного

изображения c

жидкокристаллическим

экраном и встроенным

DVD-проигрывателем

Руководство по эксплуатации Instruction manual

Table of contents Before you start

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.

Table of contents
Before you start

Utilization of the product
Important safeguards
Installation

Wall mounting
Stand installation

Connection

Connection

Outdoor antenna connection
Other connections

Operation

Control elements

Front panel

Back panel
Remote controller

Changing the battery

General operations

Teletext operations
OSD operation

Channel setting
Picture setting
Sound setting
Timer setting

Option setting

Screen setting

USB operation

General operations of file playback

DVD playback operation

Turn on/off DVD
Insert disc
Play the disc
Stop
Rewind/Fast forward
Previous/Next track
Subtitle
Audio
Repeat

Title

2

System setup

3

General setup

3

Audio setup

3

Preference setup

4

General information

4

Troubleshooting

4

Causes of interference

5

Accessories

5

Specifications

5
5
6
6
6
6
7
7
8
8
8
9
9

9
10
10
10
11
11
11
11
11
11
11
11
12
12
12
12

12
12
12
13
13
14
14
14
15
15

2 3

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.

Important safeguards

• Before connecting the AC power cord
to the DC adapter outlet, make sure that
the voltage designation of the DC adapter
corresponds to the local electrical supply.

• Accessories include a DC adaptor SAWA­01-406. Do not use other adaptors with this unit.

• Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.

• This unit should only be connected to a
wall socket having grounding.

• Always disconnect the power cord and
antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.

• When unplugging the plug, always hold
the wide slot, do not touch the metal part, and
do not destroy, refit, twist, pull or roast the
power cord.

• Please contact the service center
immediately if you found that the core is
showed in the air or has been broken.

• Please replace the AC outlet if the metal
bolt cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires would happen.

• Never touch the antenna lie or power plug
if it stars to thunder.

• Do not touch the power plug with wet
hands.

• Do not use any non-rated power socket
with numerous devices jointed on one power
socket or cable device. The wire of non­designated capacity may cause the fire due to
the generation of heat.

• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.

• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.

• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.

• Over-press the panel may destroy the
product.

• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as the damage to the product.

• Please place the product on a flat surface

Before you start

in a well-ventilated location. Keep it away from
the burning-light, direct sunlight, vibration,
high-temperature and humidity.

• Do not place any vase, potted plant, cup,
medicine and any container with water on this
product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.

• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.

• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.

• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left and right of the TV.

• Please place all the signal cords behind of
rear panel.

• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LCD TV up or down display direction.

• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, the damaged
power cord, connection cable or connection
terminal may cause the fire, the electric shock
or breakdown.

• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it can be damaged.

• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat exchange
in normal working mode, thus please do not
let children or anyone who is sensitive of
temperature to touch.

All images provided herein are schematic

drawings and may differ from of real objects.

Installation

Wall mounting

For wall mounting the back panel of this
unit is equipped with 4 screw holes (4 mm
diameter, 100 mm horizontal spread distance
x 100 mm vertical spread distance). A
wall-mount bracket should be used for wall
mounting (the bracket is not included and
should be acquired separately). Manufacturer
is not responsible for improper mounting
resulting in damage of the unit.

Stand installation

Place the LED TV on a solid flat surface.
Use soft material to place over the front screen
to avoid any damage. Then put the slits of the
stand onto the fixing elements in the lower part
of the unit until a click and fix the two parts by
four screws as shown below:

4

Connection

Connection

Antenna cable connector

75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet.

Other connections

• Connect a TV or CATV antenna to the

antenna jack.

• Connect a video source to the Composite

video input jack with RCA cable.

• Connect an audio source to the proper

Audio input jacks (left and right).

• Connect the power cord to the DC
adaptor, then connect the adapter to the DC
power jack of this unit.

• Connect PC audio input to PC main unit
with related audio cable in PC mode.

• When using the unit as a computer screen,
connect the PC to the PC jack of the unit by
the relevant cable.

TVRF antenna jack

• If the video source has a HDMI output
jack, you can connect the signal to the unit by
HDMI cable (not included).

• Component input is intended for receiving
component video signal if connected to the
component output of external signal source. To
receive audio signal for component video, please
use Left and Right audio inputs of this unit.

• Connect an external device (e.g., VCR-/
DVD-recorder) to the proper Audio/Video
output jacks of this unit with AV RCA cable.

• Connect your headphones or earphones
(not included) to the headphone socket of this
unit. When headphones are connected, the
sound output through the built-in speakers of
this unit is mute.

• Coaxial output is intended for transmitting
multi-channel sound to an external decoder
(e.g. in 5.1-CH format). RCA cable should be
used for connection.

5

Operation

Control elements

Front panel

1 2 3 4 5

Back panel

8
9

10

1716 18 19 20 21 22 23 24 25

1. CH+/- buttons

2. VOL+/- buttons

3. MENU button

4. TV/AV button

5. POWER button

6. Power indicator

7. IR sensor

6

7

button

8.

11

9.

button

10. Disc slot

12

11. RF antenna jack

12. Left audio input RCA

13

13. Right audio input RCA

14

14. Composite video input

15. Component video input

16. Power adapter input

15

17. USB port

18. HDMI input

19. PC (VGA) input

20. PC audio input

21. Video output

22. Right audio output

23. Left audio output

24. Headphone jack

25. Digital coaxial audio output

6

Operation

Remote controller (RC)

1

2

3

4

5

6

7

8

9

10

11

12
13

14

11. Red button/

button

12. TEXT ( )/ button

13. HOLD ( )/ STILL button

15

16

14. CANCEL ( ) button

15. INFO/INDEX ( ) button

button

16.

17. AUDIO (

18. RECALL (

) button

) button

19. EXIT button

20. CH+/CH- buttons

21. SETUP button

22.

17

18

19

button/TITLE button

23. Yellow button/

button

24. Blue button/ button

25. E/W/ button

26. SUBTITLE/SUBPAGE ( ) button

27. DVD button

20

21

22
23
24

25

26

27

Changing the battery

1. Remove the battery compartment cover
on the back of the RC.

2. Insert two AAA batteries batteries into
the battery compartment making sure that the
correct polarity is observed.

3. Install the cover back.

1. POWER button

2. Number buttons

3. SOURCE/REVEAL (

4. SIZE (

)/ZOOM ( ) button

) button

5. MENU button

6. ENTER button/cursor buttons (LEFT/RIGHT/
UP/DOWN)

7. VOL+/VOL- buttons

8. SLEEP/MENU button

9. LIST/REPEAT button

10. Green button/

button

1 2 3

• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side. Take the battery out
of the RC if it is not used for a long time.

• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.

• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.

7

Operation Operation

General operations

• Connect the AC input cable to the TV. At
this time the TV will enter standby mode. Press
POWER button on remote control can turn on
TV from standby mode.

• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.

• Press
again or increase volume to resume sound.

• Press SLEEP/MENU button repeatedly to
set the sleep time (from 10 to 240 min or off).
When sleep time is set, press this button to
display the time remaining until the auto turn off.

• Press AUDIO ( ) button in TV mode
repeatedly to switch between Nicam Stereo,
Mono, Dual I and Dual II sound modes (can be
unavailable for some channels).

• Press repeatedly TV/AV button on the
unit or press SOURCE button on the RC,
then press UP/DOWN cursor buttons to cycle
through the available source list as follows: TV

- AV - YPbPr - HDMI - PC - Media - DVD.

• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number from 1 to 200 directly.

• Press RECALL ( ) button on the RC
to select from the present channel and the
previously displayed channel.

• Press button to display the Favourite
channel list in TV mode (you should setup your
favourite channels in Program Edit menu).

• Press INFO button to display the preset
TV channel play information.

• Press ZOOM ( ) button repeatedly to
select an aspect ratio: Auto/4:3/16:9/Zoom1/
Zoom2. The set of available aspects can vary
depending on the current signal source.

to cut off sound, press this button

Teletext operations (option)

Select a TV channel in order to pick up
the picture signal of Teletext. Teletext button
functions are as follows:

TEXT (

): Press this button to enter into

TEXT mode. Press this button again to enter
mixed mode. Press the button again to return
to the channel you are watching.

HOLD (
move to the next page. Press this button again
to cancel operation.

INDEX (
index page.

SIZE (
top part of the page. Press this button again to
enlarge the bottom part of the page. Press this
button third time to normal size text page view.

REVEAL (
cancelled information. Press this button again
to cancel the information.

SUBPAGE (
sub-page. Input the number of sub-page and
use numeric buttons in the format 0001 for
sub page 1. The teletext will search for the sub
page. Press SUBPAGE button again to exit the
subpage mode.

CANCEL (
the teletext mode.

Red/Green/Yellow/Blue buttons: Press
these 4 color buttons to access directly to
corresponding color page displayed at the
lower parts of teletext screen.

): Press this button to stop the

): Press this button to go to the

): Press this button to enlarge the

): Press this button to reveal the

): Press this button to select

): Press this button to exit from

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the
RC or VOL+/- buttons on the panel to select
setting page.

3. Press DOWN cursor button or ENTER
button on the RC or CH+ button on the panel
to go to the parameter list.

4. Press UP/DOWN cursor buttons on the
RC or CH+/- buttons on the panel to select a
parameter to adjust.

5. Press cursor buttons on the RC or VOL+/­or CH+/- buttons on the panel to adjust the
selected parameter.

6. Press MENU button to return to the

8 9

previous menu page. Press EXIT button on the
RC to quit the menu.

Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.

Channel setting (only for TV source)

Move: Highlight the needed channel. Press
yellow button; select the position to put the
channel into. Press yellow button to confirm.

Skip: Highlight the needed channel. Press
blue button; now this channel will be skipped
when you select previous/next channels.

Favorite: Select the channel you want to edit.
If this channel is your favorite channel, you can
add the mark
channel by pressing

to the channel as your favorite

button.

Auto tuning

CHANNEL

Move Menu Enter Exit

ATV Manual tuning
Programme edit

• Auto tuning: press RIGHT button to start

automatic search of available channels. To
stop the process press MENU button.

• ATV manual tuning: Press ENTER button

to enter into manual tuning menu:

Current Ch: select channel number.
Color System: select corresponding color

system.

Sound System: select corresponding sound

system.

Fine-tune: perform fine adjustment of the

current frequency.

AFC: set On/Off automatic frequency

correction.

Search: press LEFT/RIGHT buttons; the
unit will search for next available channel
downward or upward and save it under the
current number.

• Program Edit: this item allows you to sort

TV programs according to your preferences.
Enter into program edit menu:

Delete: Select the channel you want to delete.
Press red button to delete the channel.

Rename: Highlight the needed channel. Press
green button; then press UP/DOWN buttons to
select a symbol. Press LEFT/RIGHT buttons to
select the next symbol. Press green button to
confirm.

Picture setting

Picture mode
Contrast
Brightness

PICTURE

Move Menu Enter Exit

Color
Tint
Sharpness
Color temperature
Noise reduction

• Picture Mode: User/Standard/Dynamic/

Mild.

• Contrast

• Brightness

• Color

• Tint: adjust the tone of color when your

system is in NTSC.

• Sharpness

• Color Temperature: Medium/Warm/Cool.

• Noise Reduction: Digital noise reduction

effect for reducing the video noise level: Off/
Low/Middle/High.

Sound setting

Sound mode
Treble

SOUND

Move Menu Enter Exit

Bass
Balance
Auto volume
SPDIF mode

Operation

• Sound mode: Standard/Music/Movie/

Sports/User.

• Treble: adjust treble frequency.

• Bass: adjust bass frequency.

• Balance: adjust balance between left and

right speaker.

• Auto volume: set the auto volume

correction on/off.

• SPDIF mode: select PCM/Auto/Off.

Timer setting

TIME

Move Menu Enter Exit

• Sleep timer: select the period until

automatic switch-off of the unit (10 - 240 min).

• Auto sleep: select the period of time after

which the unit will automatically switch off if no
operation is done.

• OSD timer: select the period of time after

which the OSD will be hidden.

Sleep timer
Auto sleep
OSD timer

Option setting

depending on the current signal source.

• Blue screen: set on or off blue screen

activation when no signal.

• Key lock: select ON to lock all buttons on

the panel. Set OFF to unlock the buttons.

• Reset: reset the parameters to initial

factory settings.

• Software upgrade: this option is intended

for using by qualified technicians only.

Screen setting (only for PC mode)

Auto adjust

SCREEN

Move Menu Enter Exit

• Auto adjust: automatical setting of the

parameters.

• Horizontal Position: adjust horizontal

position of the image.

• Vertical Position: adjust vertical position

of the image.

• Clock: adjust the image frequency

manually.

• Phase: adjust the phase manually.

Horizontal Pos.
Vertical Pos.
Clock
Phase

OSD language
TT language
Aspect ratio

OPTION

Move Menu Enter Exit

Blue screen
Key lock
Reset
Software upgrade (USB)

• OSD Language: select the language of

the OSD menu.

• TT Language: select teletext language.

• Aspect ratio: Auto/4:3/16:9/Zoom1/

Zoom2. The set of available aspects can vary

10

USB operation

Insert a USB into the USB jack. Select
Media source and press ENTER button. The
screen will show a USB playback window, in
which you can select Music, Photo, Movie and
Text contents to play by pressing LEFT/RIGHT
cursor buttons and ENTER button.

USB file systems supported: FAT,
FAT32. 2.0 USB version is supported, maximum
capacity is 320 Gb. For correct and satisfactory
operation, licensed USB devices of famous
brands should be used with this unit. Avoid using
USB devices of unknown brands. Playback of