Hyundai H-LEDVD24V10 Instruction Manual

H-LEDVD24V10

	Телевизор цветного
	изображения c
	жидкокристаллическим
LED TV with built-in DVD player	экраном и встроенным
	DVD-проигрывателем

Instruction manual

Руководство по эксплуатации

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents	2	Zoom	12
Before you start	3	Repeat	12
Utilization of the product	3	A-B	12
Important safeguards	3	Step	12
Installation	4	Display	12
Wall mounting	4	Program	12
Stand installation	4	Subtitle	13
Connection	5	Angle	13
Connection	5	MP3 operation	13
Outdoor antenna connection	5	Intro	13
Other connections	5	Title	13
Operation	6	Audio	13
Control elements	6	Goto function	13
Front panel	6	Disc menu operation	13
Back panel	6	System setup	14
Remote controller	7	General setup	14
Changing the battery	7	Audio setup	14
General operations	8	Dolby Digital setup	14
Signal sources	8	Preference setup	15
Teletext operations	8	General information	15
PC screen	9	Troubleshooting	15
OSD operation	9	Causes of interference	16
Channel setting	9	Accessories	16
Picture setting	10	Specifications	17
Sound setting	10
Timer setting	10
Option setting	10
Screen setting	10
USB operation	11
General operations of file playback	11
DVD playback operation	11
Turn on/off DVD	11
Insert disc	12
Play the disc	12
Stop	12
Rewind/Fast forward	12
Previous/next track/chapter/title	12
Slow playback	12

2

Before you start

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Important safeguards

•Before connecting the AC power cord to the DC adapter outlet, make sure that the voltage designation of the DC adapter corresponds to the local electrical supply.

•Accessories include a DC adaptor RS- 330/120-S325. Do not use other adaptors with this unit.

•Please unplug the power cord from the AC outlet and contact a service center for repair

if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.

•This unit should only be connected to a wall socket having grounding.

•Always disconnect the power cord and antenna during a storm.

•Do not fix the power cord with a metal nail.

•Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periods of time.

•When unplugging the plug, always hold the wide slot, do not touch the metal part, and do not destroy, refit, twist, pull or roast the power cord.

•Please contact the service center immediately if you found that the core is

showed in the air or has been broken.

•Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.

•Never touch the antenna lie or power plug if it stars to thunder.

•Do not touch the power plug with wet hands.

•Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of nondesignated capacity may cause the fire due to the generation of heat.

•All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.

•Please use the accessories provided

by the manufacturer. Using inadequate accessories may result in accidents.

•Please adjust the product through the panel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.

•Over-press the panel may destroy the product.

•Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product.

•Please place the product on a flat surface

3

Before you start

in a well-ventilated location. Keep it away from the burning-light, direct sunlight, vibration, high-temperature and humidity.

•Do not place any vase, potted plant, cup, medicine and any container with water on this product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.

•Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.

•Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.

•Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.

•Do not place the unit into closed space

of TV for better ventilation; it can reduce the product lifetime. Keep a space at least 10 cm at above, left and right of the TV.

•Please place all the signal cords behind of rear panel.

•Do not overexert or touch the panel when you convey the product. Do not transfer the LCD TV up or down display direction.

•Do not transport it with the power cord

or the connection cable connected. If you move this product with the power cord or the connection cable connected, the damaged power cord, connection cable or connection terminal may cause the fire, the electric shock or breakdown.

•2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it can be damaged.

•The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.

All images provided herein are schematic drawings and may differ from of real objects.

Installation

Wall mounting

For wall mounting the back panel of this unit is equipped with 4 screw holes (4 mm diameter, 100 mm horizontal/vertical spread distance). A wall-mount bracket should be used for wall mounting (the bracket is not included and should be acquired separately). Manufacturer is not responsible for improper mounting resulting in damage of the unit.

Stand installation

Place the TV on a solid flat surface. Use soft material to place over the screen to avoid any damage. Then position the stand on the below angle and turn it anti-clockwise to ensure that the stand is locked to the TV as shown below:

To disassemble the stand, lift the plastic tab as shown in the middle picture below and then turn the stand clockwise to unlock. To avoid breaking, do not lift the plastic tab with too much force.

4

Connection

Connection

Antenna cable connector	TVRF antenna jack

75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω impedance converter to plug in antenna input terminal on the rear of the cabinet.

Other connections

•Connect the audio sources (Including DVD, VCDR, CAMCORDER and PC) to the proper Audio input jacks ‘L’ and ‘R’.

•Connect the video source to the Composite video jack by RCA cable.

•If the video source has a SCART output jack, you can connect the signal to the monitor by the SCART cable (not included).

•Component input Y/Pb/Pr is intended

to receive component video signal from the external device.

• Connect the power cord to the DC adaptor, then connect the adapter to the DC power jack of this unit.

•When using the LCD as a computer screen, connect the PC to the VGA jack from the monitor by the relevant cable (not included).

•This unit has PC audio in jack. Connect this jack to PC main unit with related audio cable in PC mode and adjust the volume to what you want.

•If the video source has a HDMI output jack, you can connect the signal to the monitor by the HDMI cable (not included).

•Connect your headphones or earphones (not included) to the headphone socket of this unit. When earphones are connected, the sound output through the built-in speakers of this unit is mute.

•Coaxial output is intended for transmitting multi-channel sound to an external decoder (e.g. in 5.1-CH format). RCA cable should be used for connection.

5

Operation

Control elements

Front panel

1. IR sensor

2. Power indicator

1

2

Back panel

1																							1.	Disc slot
2																							2.	PLAY/PAUSE button
3																						17	3.	EJECT button
4																							4. POWER button
5																						18	5.	TV/AV button
6																							6.	CH+/CHbuttons
																						19	7.	VOL+/VOLbuttons
7																							8.	MENU button
8																						20	9.	DC adapter input
																							10.		USB port
																							11.		HDMI input
																							12.		VGA input
																							13.		PC audio input
																							14.		SCART connector
9						10		11		12		13			14		15		16
																							15.		Headphone jack
																							16.		Coaxial output
																							17.		RF antenna jack
																							18.		Stereo audio input (white=left;
																							red=right)
																							19.		Composite video input
																							20.		Component video input
																							(YPbPr)

6

Operation

Remote controller (RC)

		20
	1	21
	2
		22
	3	23
	4	24
	5
	6
	7	25
	8	26
	9	27
	10	28
	11	29
	12	30
	13
		31
	14
	15	32
	16	33
	17	34
	18	35
	19	36
		37

1.POWER button

2.Number buttons

3.ASPECT button

4.VOL+/VOLbuttons

5.DISPLAY button

6.ENTER button/cursor buttons (LEFT/RIGHT/ UP/DOWN)

7.LCD MENU button

8.P.MODE button

9.INPUT button

10.HOLD/ button

11.TEXT/ button

12./INDEX button

13./SIZE button

14.button

15.button

16.TITLE button

17.D.MENU button

18.PROGRAM/Red button

19.INTRO/Green button

20.AUTO/ button

21.MUTE button

22. button

23.NICAM button

24.CH+/CHbuttons

25.DVD SETUP button

26.SMODE button

27.SLEEP button

28.PGUP/SLOW button

29.PGDW/STEP button

30.SUBPAGE/ZOOM button

31.REVEAL/AUDIO button

32.D.SUB button

33.ANGLE button

34.GOTO button

35.D.DISP button

36.A-B/Blue button

37.REPEAT/Yellow button

Changing the battery

1.Remove the battery compartment cover on the back of the RC.

2.Insert 2 x AAA batteries batteries into the battery compartment making sure that the correct polarity is observed.

3.Install the cover back.

• The RC should be pointed at remote sensor within 8 meters and within 30 degrees at the left or the right side.

•Take the battery out of the RC if it is not used for a long time. Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.

•Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.

7

Operation

General operations

•Press POWER button on the unit or on the RC to switch on the power, the indication light will be in green color. Press POWER button again to switch off the power, and the light will be in red color.

•The picture setup, sound setup, previous channel can be memorized before you switch off the unit. The unit will restart under the previous state when you switch on it again.

•Press VOLbutton repeatedly to decrease the volume; press VOL+ button repeatedly to increase the volume from 0 to 100.

•Press SLEEP button repeatedly to set the sleep time (from 0 to 240 min).

•Select the TV function mode. Channel

‘1’ will appear on the left bottom corner after channel searching is completed. Press CH-/CH+ buttons to select previous or next channels; or press number buttons to enter a

channel number directly; or press [-/--] button until the screen displays ‘-’ or ‘--’ or ‘---’, then use number buttons to enter a channel number from 1 to 199.

•Pressbutton on the RC to select from the present channel and the previously displayed channel.

•Press NICAM button in TV mode repeatedly to switch between different Nicam sound modes (can be unavailable for some channels).

•Press P.MODE button repeatedly to cycle through the available video picture modes from the following 4 types: Dynamic => Standard => Mild => User.

•Press S.MODE button repeatedly to cycle through the available sound modes from the following 5 types: Movie => Sports => User => Standard => Music.

•Press MUTE button to cut off sound, press this button again or adjust volume to resume sound.

•Press DISPLAY button to display the preset TV channel play information.

•Press ASPECT button repeatedly to select

a screen display size from the available list: 16:9/ZOOM1/ZOOM2/Auto/4:3/Just Scan.

Available aspects may differ for different signal sources.

Signal sources

Press INPUT button on the RC or TV/AV button on the unit, then press UP/DOWN cursor buttons to cycle through the available source list as follows: TV - AV - SCART - YPBPR - HDMI - PC - Media - DVD. Press ENTER button to confirm.

TELETEXT operations (option)

•Press INPUT button to select the TV mode. Then press CH-/CH+ buttons to select TV channel in order to pick up the picture signal of TELETEXT.

•Press PGUP/PGDW buttons to select the previous page or the next page; use number buttons and [-/--] button to enter into a page.

•Teletext button functions are as follows: TEXT: Press TEXT button to enter into

TEXT mode. Press this button again to return to the channel you are watching.

PGDW: Press this button to view the next teletext page’s program.

PGUP: Press this button to view the previous teletext page’s program.

HOLD: Press this button to stop the move to the next page, and the hold symbol will appear in the top left hand corner of the screen. Press this button again to cancel operation.

INDEX: Press this button to go to the index page.

SIZE: Press this button to enlarge the text shown on the teletext screen, and one half of page could be shown. Press this button again to view the second half of this page. Press this button third time to normal size text page view.

REVEAL: Press this button to reveal the cancelled information. Press this button again to cancel the information.

SUBPAGE: Press this button to select sub page, and the sub-page symbol will appear in the left top hand corner of the screen. Enter the

8

Operation

number of sub page and use numeric buttons in the format 0001 for sub page 1. The teletext will search for the sub page.

Red/Green/Yellow/Blue buttons: Press these 4 color buttons to access directly to corresponding color page displayed at the lower parts of teletext screen.

PC screen

Select the PC input (TV into PC) mode. The unit has a VGA jack for a normal computer. Connect the monitor with a PC by this jack and the unit can be used as the monitor for the PC.

OSD operation

1.Press LCD MENU button to enter the setting menu displayed on the screen.

2.Press LEFT/RIGHT cursor buttons on the RC or VOL+/- buttons on the panel to select setting page.

3.Press DOWN cursor button or ENTER button on the RC or CH+ button on the panel to go to the parameter list.

4.Press UP/DOWN cursor buttons on the RC or CH+/- buttons on the panel to select a parameter to adjust.

5.Press cursor buttons on the RC or VOL+/- or CH+/- buttons on the panel to adjust the selected parameter.

6.Press LCD MENU button to return to the previous menu page.

Some menu items may be in grey color, in this case they are not adjustable. Pictures of OSD menu are for reference only; they may differ from the real screens.

Channel setting (only for TV source)

Auto tuning

CHANNEL ATV Manual tuning

Programme edit

Move

Menu

OK

Exit

•Auto tuning: press LEFT/RIGHT buttons to start automatic search of available channels. To stop the process press LCD MENU button.

•ATV Manual tuning: Press ENTER button to enter into manual tuning menu:

Current Channel: select channel number. Colour System: select corresponding colour

system.

Sound System: select corresponding sound system.

Fine-tune: perform fine adjustment of the current frequency.

AFC: set On/Off automatic frequency correction.

Search: press LEFT/RIGHT buttons; the unit will search for next available channel downward or upward and save it under the current number.

•Program Edit: this item allows you to sort TV programs according to your preferences. Enter into program edit menu:

Delete: Select the channel you want to delete. Press red button to delete the channel.

Rename (only in ATV mode): Highlight the needed channel. Press green button; then press UP/DOWN buttons to select a symbol. Press LEFT/RIGHT buttons to select the next symbol. Press ENTER button to confirm.

Move: Highlight the needed channel. Press yellow button; select the position to put the channel into. Press yellow button to confirm.

Skip: Highlight the needed channel. Press blue button; now this channel will be skipped when you select previous/next channels.

9

Operation

Picture setting

Picture mode

Contrast

Brightness

PICTURE Color

Tint

Sharpness

Color temperature

Noise reduction

Move

Menu

OK

Exit

•Picture Mode: Dynamic/Standard/Mild/ User.

•Contrast

•Brightness

•Color

•Tint: adjust the tone of color when your system is in NTSC.

•Sharpness

•Colour Temperature: Normal/Warm/Cool.

•Noise Reduction: Digital noise reduction effect for reducing the video noise level: Off/ Low/Middle/High.

Sound setting

Sound mode

Treble

SOUND Bass

Balance

Auto volume

SPDIF mode

Move

Menu

OK

Exit

•Sound mode: Movie/Sports/User/ Standard/Music.

•Treble: adjust treble frequency.

•Bass: adjust bass frequency.

•Balance: adjust balance between left and right speaker.

•Auto volume: set the auto volume correction on/off.

•SPDIF mode: select PCM/Auto/Off.

Timer setting

Sleep timer

TIME Auto sleep

OSD timer

Move

Menu

OK

Exit

•Sleep timer: select the period until automatic switch-off of the unit (0 - 240 min).

•Auto sleep: select the period of time after which the unit will automatically switch off if no operation is done.

•OSD timer: select the period of time after which the OSD will be hidden.

Option setting

OSD language TT language

Aspect ratio OPTION Blue screen

Key lock Reset

Software upgrade (USB)

Move

Menu

OK

Exit

•OSD Language: select the language of the OSD menu.

•TT Language: select teletext language.

•Aspect ratio: 16:9/ZOOM1/ZOOM2/ Auto/4:3/Just Scan. The set of available aspects can vary depending on the current signal source.

•Blue screen: set on or off blue screen activation when no signal.

•Key lock: select ON to lock all buttons on the panel. Set OFF to unlock the buttons.

•Reset: reset the parameters to initial factory settings.

•Software upgrade: this option is intended for using by qualified technicians only.

10

Operation

Screen setting (only for PC mode)

Auto adjust

Horizontal Pos.

SCREEN Vertical Pos.

Clock

Phase

Move

Menu

OK

Exit

•Auto adjust: automatical setting of the parameters. Also to perform this function you can press AUTO/ button on the RC.

•Horizontal Position: adjust horizontal position of the image.

•Vertical Position: adjust vertical position of the image.

•Clock: adjust the image frequency manually.

•Phase: adjust the phase manually.

USB operation

Insert a USB into the USB jack. Select Media source and press ENTER button. The screen will show a USB playback window, in which you can select Music, Photo, Movie and Text contents to play by pressing LEFT/RIGHT cursor buttons and ENTER button.

USB file systems supported: FAT, FAT32. 2.0 USB version is supported. For correct and satisfactory operation, licensed USB devices of famous brands should be used with this unit. Avoid using USB devices of unknown brands. Playback of some file formates cannot be supported.

General operations of file playback

•Press cursor buttons to select Return option and press ENTER button if you want to go back to the previous menu.

•In the content menu, press cursor buttons to select folder, press ENTER button or TEXT/ button to enter it, then press cursor

buttons to select the file you want to watch or to listen to. When highlighting the file, the file information will appear on the right (not available for text files) and picture will be

previewed in the center (not available for music and text files). Press ENTER button or TEXT/

button to play the selected file.

•While playback, press INFO button; the bottom of the screen will show playback menu in which you can select an operation by LEFT/ RIGHT cursor buttons on perform this operation by pressing ENTER button.

•While playback, press TEXT/ button

to pause or resume playback. Press HOLD/ button to stop playback.

•When playing photo, movie and music files, you can press REPEAT button to select the repeat play mode.

•When playing music files you can press / buttons to fast reverse or forward. You can press / buttons to select the desired files manually in normal condition.

•When playing photo files, you can press

/buttons to page up or page down the file. Press LEFT/RIGHT cursor buttons to rotate the image.

DVD player operation

Turn on and off the DVD function

Turn on the LCD TV and then select DVD source.

Insert disc

•Insert the disc to the disc slot, the player will load the disc automatically. After loading the disc content, it will switch to play mode automatically.

•Insert disc with reflective data side facing the front of the unit. When inserting the

disc incorrectly, you may damage the DVD mechanism. Some slight picture noise and some sounds can be produced when the disc

is loading, unloading and during playback, this is normal and can be ignored.

11

Operation

•For some discs, after loading the content of the disc, you need to press TEXT/ button or select from the disc menu to start.

•To eject the disc from the loader press AUTO/ button on the RC or EJECT button on the unit.

•Only standard shape and 12-cm size discs can be used.

Play the disc

According to the disc content, menu will display for your selection. When playing the disc, you may use TEXT/ button on the RC or PLAY/PAUSE button on the unit to toggle between Play and Pause mode.

Manufacturer guarantees regular playback of licensed discs only. Some AVI files cannot be played due to their parameters and recording conditions. Video files more than 2 Gb having AVI extension can be played partially.

Stop

While playback, press HOLD/ button to stop playback. If you press TEXT/ button, playback will resume from the stop point.

Press HOLD/ button twice; if afterwards you press button, playback will start from the beginning.

For some kinds of discs last memory function is not available.

Rewind/Fast forward

While playback, press repeatedly/ buttons to fast reverse or forward. With each pressing, the playback speed will increase as follows: 2X - 4X - 8X - 16X - 32X - Normal. While fast playback, press TEXT/ button to go to normal speed playback.

Previous/next track/chapter/title

While playback press		/		buttons to

select previous or next track/chapter. Press number button to select the track under corresponding number.

Slow playback

Press PGUP/SLOW button repeatedly to select slow playback speed: 1/2 - 1/4 - 1/8 - 1/16 - Normal. While slow playback, press TEXT/ button to go to normal speed playback.

Zoom

While playback press ZOOM button to zoom in or out the image as follows: 2x - 3x - 4x - 1/2 - 1/3 - 1/4 - Normal. When zoomed in, you can press cursor buttons to move the picture.

Repeat

While playback press REPEAT button to select repeat mode (repeat track/chapter/title repeat all tracks/chapters/titles, etc.). Available repeat modes may differ depending on the type of the disc.

A-B

While playback press A-B button on the RC to set the beginning of the fragment to play repeatedly. Press this button again to set the final point of the fragment. The selected fragment will be played repeatedly. Press this button again to cancel repeat playback.

Step

While video playback press PGDW/STEP button once to make the picture still. Press this button repeatedly to play the video frame by frame. Press TEXT/ button to go to normal speed playback. While step playback, the sound is cut off.

Display

While playback press D.DISP button on the RC to show the current playback information such as Title/Chapter elapsed/remaining etc. Available data may differ depending on the type of the disc.

Program

• While playback press PROGRAM button to call programming menu. Press cursor buttons on the RC to select a position, then press number buttons to set the number

12