Hyundai H-LED32V16 Instruction Manual
H-LED32V16
LED TV
ЦВЕТНОГО ИЗОБРАЖЕНИЯ
ТЕЛЕВИЗОР
ЖИДКОКРИСТАЛЛИЧЕСКИЙ
(LCD)
Руководство по эксплуатации Instruction manual
Table of contents Before you start
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
Table of contents
Before you start
Utilization of the product
Important safeguards
Installation
Wall mounting
Stand installation
Connection
Connection
Outdoor antenna connection
Other connections
Operation
Control elements
Front panel
Back panel
Remote controller
Changing the battery
General operations
Teletext operations
OSD operation
Channel setting
Picture setting
Sound setting
Timer setting
Option setting
Screen setting
USB operation
General operatoins of file playback
General information
Troubleshooting
Causes of interference
Accessories
Specifications
2
3
3
3
4
4
4
5
5
5
5
6
6
6
6
7
7
8
8
8
9
9
10
10
10
10
11
11
12
12
12
13
13
2 3
Utilization of the product
If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.
Important safeguards
• Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.
• This unit should only be connected to a
wall socket having grounding.
• Always disconnect the power cord and
antenna during a storm.
• Do not fix the power cord with a metal nail.
• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.
• When unplugging the plug, always hold
the wide slot, do not touch the metal part, and
do not destroy, refit, twist, pull or roast the
power cord.
• Please contact the service center
immediately if you found that the core is
showed in the air or has been broken.
• Please replace the AC outlet if the metal
bolt cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires would happen.
• Never touch the antenna lie or power plug
if it stars to thunder.
• Do not touch the power plug with wet
hands.
• Do not use any non-rated power socket
with numerous devices jointed on one power
socket or cable device. The wire of nondesignated capacity may cause the fire due to
the generation of heat.
• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.
• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.
• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.
• Over-press the panel may destroy the
product.
• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as the damage to the product.
• Please place the product on a flat surface
in a well-ventilated location. Keep it away from
the burning-light, direct sunlight, vibration,
high-temperature and humidity.
• Do not place any vase, potted plant, cup,
medicine and any container with water on this
Before you start
product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.
• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.
• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.
• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.
• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left and right of the TV.
• Please place all the signal cords behind of
rear panel.
• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LCD TV up or down display direction.
• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, the damaged
power cord, connection cable or connection
terminal may cause the fire, the electric shock
or breakdown.
• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it can be damaged.
• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat exchange
in normal working mode, thus please do not
let children or anyone who is sensitive of
temperature to touch.
All images provided herein are schematic
drawings and may differ from of real objects.
Installation
Wall mounting
For wall mounting the back panel of this
unit is equipped with 4 screw holes (4 mm
diameter, 200 mm horizontal spread distance
x 100 mm vertical spread distance). A
wall-mount bracket should be used for wall
mounting (the bracket is not included and
should be acquired separately). Manufacturer
is not responsible for improper mounting
resulting in damage of the unit.
Stand installation
Place the LED TV on a solid flat surface.
Use soft material to place over the front screen
to avoid any damage. Then align the holes in
the lower back part of the TV with the holes on
the fixing part of the stand and fix the two parts
by 5 screws as shown below:
4
Connection
Connection
Antenna cable connector
75 Ohm co-axis cable
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet.
Other connections
• Connect a TV or CATV antenna to the
antenna jack.
• Connect the audio/video source to the mini
AV input by provided AV connector cable.
• Connect the power cord to the electric
supply outlet.
• Connect PC audio input to PC main unit
with related audio cable in PC mode.
• When using the unit as a computer screen,
connect the PC to the PC jack of the unit by
the relevant cable.
• If the video source has a HDMI output
jack, you can connect the signal to the unit by
HDMI cable (not included).
TVRF antenna jack
• Mini component input is intended to
receive component video signal from the
external device. Connection is made with the
help of supplied YUV connection cable.
• Connect an external device (e.g., VCR-/
DVD-recorder) to the proper Audio/Video
output jacks of this unit with AV RCA cable.
• Connect your headphones or earphones
(not included) to the headphone socket of this
unit. When headphones are connected, the
sound output through the built-in speakers of
this unit is mute.
• Coaxial output is intended for transmitting
multi-channel sound to an external decoder
(e.g. in 5.1-CH format). RCA cable should be
used for connection.
5
Operation
Control elements
Front panel
Back panel
1. CH+/- buttons
2. VOL+/- buttons
3. MENU button
1
4. TV/AV button
5. STANDBY button
6. IR sensor
2
7. Power indicator
3
4
TV/AV
5
6
7
1. Power switch
2. USB port
3. HDMI x 3 inputs
4. Power cord
5. Audio/video output RCA
6. Digital audio output
7
7. Antenna jack
8. Headphone jack
8
9. Mini component video input
10. Mini audio/video input
9
11. PC audio input
10
12. VGA input
11
1 2 3 4 5 6
6
12
Operation
Remote controller (RC)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1. STANDBY button
2. Number buttons
3. ASPECT button
4. VOL+/VOL- button
5. ENTER button/cursor buttons (LEFT/RIGHT/
UP/DOWN)
6. MENU button
7. P.MODE button
8. SOURCE button
9. button
10. button
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
11. HOLD button
12. TEXT button
13. SIZE button
14. INDEX button
15. FAV button
16. USB button
17. Green button
18. Red button
button
19.
20. PC AUTO button
21. button
22. NICAM button
23. CH+/CH- buttons
24. DISPLAY button
25. EXIT button
26. S.MODE button 31. button
27. SLEEP button 32. REVEAL button
28. button 33. SUBPAGE button
29. button 34. Yellow button
30. button 35. Blue button
Changing the battery
1. Remove the battery compartment cover
on the back of the RC.
2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.
7
Operation Operation
General operations
• Press STANDBY button on the unit or
on the RC to switch on the power. Press
STANDBY button again to switch the unit into
standby mode, the power indicator will be red.
When the unit is on, the indicator will be off.
• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.
• Press
again or increase volume to resume sound.
• Press SLEEP button repeatedly to set the
sleep time (from 10 to 240 min or off). When
sleep time is set, press this button to display
the time remaining until the auto turn off.
• Press NICAM button in TV mode
repeatedly to switch between Nicam Stereo,
Mono, Dual I and Dual II sound modes (can be
unavailable for some channels).
• Press repeatedly TV/AV button on the
unit or press SOURCE button on the RC,
then press UP/DOWN cursor buttons to cycle
through the available source list as follows: TV
- AV - YPbPr - VGA - HDMI - USB.
• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number from 0 to 199 directly.
• Press RECALL ( ) button on the RC
to select from the present channel and the
previously displayed channel.
• Press FAV button to display the Favourite
channel list in TV mode (you should setup your
favourite channels in Program Edit menu).
• Press DISPLAY button to display the
preset TV channel play information.
• Press ASPECT button repeatedly to select
an aspect ratio: 16:9/4:3/Panorama/Zoom1/
Zoom2. The set of available aspects can vary
depending on the current signal source.
to mute sound, press this button
Teletext operations (option)
Select a TV channel in order to pick up
the picture signal of Teletext. Teletext button
functions are as follows:
TEXT: Press this button to enter into TEXT
mode. Press this button again to enter mixed
mode. Press the button again to return to the
channel you are watching.
HOLD: Press this button to stop the move
to the next page. Press this button again to
cancel operation.
INDEX: Press this button to go to the index
page.
SIZE: Press this button to enlarge the top
part of the page. Press this button again to
enlarge the bottom part of the page. Press this
button third time to normal size text page view.
REVEAL: Press this button to reveal the
cancelled information. Press this button again
to cancel the information.
SUBPAGE: Press this button to select subpage. Input the number of sub-page and use
numeric buttons in the format 0001 for sub
page 1. The teletext will search for the sub
page. Press SUBPAGE button again to exit the
subpage mode.
Red/Green/Yellow/Blue buttons: Press
these 4 color buttons to access directly to
corresponding color page displayed at the
lower parts of teletext screen.
OSD operation
1. Press MENU button to enter the setting
menu displayed on the screen.
2. Press LEFT/RIGHT cursor buttons on the
RC or VOL+/- buttons on the panel to select
setting page.
3. Press DOWN cursor button or ENTER
button on the RC or CH+ button on the panel
to go to the parameter list.
4. Press UP/DOWN cursor buttons on the
RC or CH+/- buttons on the panel to select a
parameter to adjust.
5. Press cursor buttons on the RC or VOL+/or CH+/- buttons on the panel to adjust the
selected parameter.
6. Press MENU button to return to the
previous menu page. Press EXIT button on the
8 9
RC to quit the menu.
Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.
Channel setting (only for TV source)
yellow button; select the position to put the
channel into. Press yellow button to confirm.
Skip: Highlight the needed channel. Press
blue button; now this channel will be skipped
when you select previous/next channels.
Favorite: Select the channel you want to edit.
If this channel is your favorite channel, you can
add the mark to the channel as your favorite
channel by pressing button.
Auto scan
TV Manual tuning
Programme edit
CHANNEL
Move Menu Select Exit
• Auto scan: press RIGHT button to start
automatic search of available channels. To
stop the process press MENU button.
• TV manual tuning: Press ENTER button to
enter into manual tuning menu:
Storage to: select channel number to store
in.
Color System: select corresponding color
system.
Sound System: select corresponding sound
system.
Current Ch: select channel number.
Search: press LEFT/RIGHT buttons; the
unit will search for next available channel
downward or upward and save it under the
current number.
Fine-tune: perform fine adjustment of the
current frequency.
• Programme Edit: this item allows
you to sort TV programs according to your
preferences. Enter into program edit menu:
Delete: Select the channel you want to delete.
Press red button to delete the channel.
Rename: Highlight the needed channel. Press
green button; then press UP/DOWN buttons to
select a symbol. Press LEFT/RIGHT buttons to
select the next symbol. Press green button to
confirm.
Move: Highlight the needed channel. Press
Picture setting
Picture mode
Contrast
Brightness
Color
PICTURE
Move Menu Select
• Picture Mode: User/Standard/Dynamic/
Mild.
• Contrast
• Brightness
• Color
• Sharpness
• Tint: adjust the tone of color when your
system is in NTSC.
• Color Temperature: Medium/Warm/Cool/
User.
• Red: Adjust the red level of the image.
• Green: Adjust the green level of the image.
• Blue: Adjust the blue level of the image.
• Noise Reduction: Digital noise reduction
effect for reducing the video noise level: Off/
Low/Middle/High/Default.
• Aspect ratio: 16:9/4:3/Panorama/Zoom1/
Zoom2. The set of available aspects can vary
depending on the current signal source.
• Screen setting (only for PC mode)
Sharpness
Tint
Exit
Loading...