Hyundai H-LED32V14 Instruction Manual

H-LED32V14

LED TV

ЦВЕТНОГО ИЗОБРАЖЕНИЯ

ТЕЛЕВИЗОР

ЖИДКОКРИСТАЛЛИЧЕСКИЙ

ME61АГ23

Руководство по эксплуатации Instruction manual

(LCD)

Table of contents Before you start

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.

Table of contents
Before you start

Utilization of the product
Important safeguards
Installation

Wall mounting
Stand installation

Connection

Connection

Outdoor antenna connection
Other connections

Operation

Control elements

Front panel

Back panel
Remote controller

Changing the battery

General operations

Teletext operations
OSD operation

Channel setting
Picture setting
Sound setting
Timer setting

Option setting
USB operation

Background information
Operatoins of file playback

General information

Troubleshooting

Causes of interference
Accessories
Specifications

2
3
3
3
4
4
4
5
5
5
5
6
6
6
6
7
7
8
8
8
9

9
10
10
10
11
11
11
12
12
12
13
13

2 3

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.

Important safeguards

• Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.

• This unit should only be connected to a
wall socket having grounding.

• Always disconnect the power cord and
antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.

• When unplugging the plug, always hold
the wide slot, do not touch the metal part, and
do not destroy, refit, twist, pull or roast the
power cord.

• Please contact the service center
immediately if you found that the core is
showed in the air or has been broken.

• Please replace the AC outlet if the metal
bolt cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket
with numerous devices jointed on one power
socket or cable device. The wire of non­designated capacity may cause the fire due to
the generation of heat.

• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.

• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.

• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.

• Over-press the panel may destroy the
product.

• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as the damage to the product.

• Please place the product on a flat surface
in a well-ventilated location. Keep it away from
the burning-light, direct sunlight, vibration,
high-temperature and humidity.

• Do not place any vase, potted plant, cup,
medicine and any container with water on this

Before you start

product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.

• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.

• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.

• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left and right of the TV.

• Please place all the signal cords behind of
rear panel.

• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LED TV up or down display direction.

• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, the damaged
power cord, connection cable or connection
terminal may cause the fire, the electric shock
or breakdown.

• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it can be damaged.

• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat exchange
in normal working mode, thus please do not
let children or anyone who is sensitive of
temperature to touch.

All images provided herein are schematic

drawings and may differ from of real objects.

Installation

Wall mounting

For wall mounting the back panel of this
unit is equipped with 4 screw holes (4 mm
diameter, 200 mm horizontal spread distance
x 100 mm vertical spread distance). A
wall-mount bracket should be used for wall
mounting (the bracket is not included and
should be acquired separately). Manufacturer
is not responsible for improper mounting
resulting in damage of the unit.

Stand installation

Place the LED TV on a solid flat surface.
Use soft material to place over the front screen
to avoid any damage. Then put the slits of the
stand onto the fixing elements in the lower part
of the unit until a click and fix the two parts by
four screws as shown below:

4

Connection

Connection

Antenna cable connector

75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet.

Other connections

• Connect a TV or CATV antenna to the

antenna jack.

• Connect a video source to the Composite

video input jack with RCA cable.

• Connect an audio source to the proper

Audio input jacks (left and right).

• Connect PC audio input to PC main unit

with related audio cable in PC mode.

• When using the unit as a computer screen,
connect the PC to the PC jack of the unit by
the relevant cable.

TVRF antenna jack

• If the video source has a HDMI output
jack, you can connect the signal to the unit by
HDMI cable (not included).

• Component input is intended for receiving
component video signal if connected to the
component output of external signal source. To
receive audio signal for component video, please
use Left and Right audio inputs of this unit.

• Connect an external device (e.g., VCR-/
DVD-recorder) to the proper Audio/Video
output jacks of this unit with AV RCA cable.

5

Operation

Control elements

Front panel

1
2

Back panel

1

2

3

4

5

6 7 8 9 10

1. Remote control sensor

2. Power indicator

1. CH+/CH- buttons

11

2. VOL+/VOL- button

3. MENU button

4. TV/AV button

5. POWER button

6. HDMI input

12

7. Audio-video output

8. PC audio input

9. PC (VGA) input

10. Antenna input

11. Audio-video input-1

12. Component video input

13

13. Audio-video input-2

14. USB1/USB2 ports

14

6

Operation

Remote controller (RC)

1

2

3

4

5

6

7

8
9

10

11

12
13

11. Red button/

button

12. TEXT ( )/ button

13. HOLD ( )/ STILL button

14

15

14. INFO/INDEX ( ) button

button

15.

16. AUDIO ( ) button

17. RECALL (

) button

18. EXIT button

19. CH+/CH- buttons

20. CANCEL (

) button

21. button

16

17

18

22. Yellow button/

23. Blue button/

24. E/W button

25. SUBPAGE ( ) button

button

button

Changing the battery

1. Remove the battery compartment cover
on the back of the RC.

19

20
21
22
23

24

25

2. Insert the batteries into the battery
compartment making sure that the correct
polarity is observed.

3. Install the cover back.

1. POWER button

2. Number buttons

3. SOURCE/REVEAL (

4. SIZE (

)/ZOOM ( ) button

) button

5. MENU button

6. ENTER button/cursor buttons (LEFT/RIGHT/
UP/DOWN)

7. VOL+/VOL- buttons

8. SLEEP button

9. REPEAT button

10. Green button/

button

1 2 3

• Use two AAA batteries for the RC. The RC
should be pointed at remote sensor within 8
meters and within 30 degrees at the left or the
right side.

• Take the battery out of the RC if it is not
used for a long time.

• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.

• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.

7

Operation Operation

General operations

• Press POWER button on the unit or on
the RC to switch on the power. Press POWER
button again to switch the unit into standby
mode. When the unit is on, the power indicator
will be off, in standby mode the indicator will
be red.

• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.

• Press
again or increase volume to resume sound.

• Press SLEEP button repeatedly to set the
sleep time (up to 240 minutes). When sleep
time is set, press this button to display the time
remaining until the auto turn off.

• Press AUDIO (
repeatedly to switch between Stereo, Mono,
Dual I, Dual I+II and Dual II sound modes (can
be unavailable for some channels).

• Press repeatedly TV/AV button on the
unit or press SOURCE button on the RC,
then press UP/DOWN cursor buttons to cycle
through the available source list as follows: TV

- AV - YPbPr - HDMI - PC - USB.

to standby mode if no signal for 5 minutes. In
PC-RGB mode the unit will automatically go to
standby mode if no signal for 30 seconds.

• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number from 1 to 235 directly.

• Press RECALL ( ) button on the RC
to select from the present channel and the
previously displayed channel.

• Press button to display the Favourite
channel list in TV mode (you should setup your
favourite channels in Program Edit menu).

• Press INFO button to display the preset
TV channel play information.

• Press ZOOM ( ) button repeatedly to
select an aspect ratio: 4:3/14:9/16:9/Zoom1/
Zoom2. The set of available aspects can vary
depending on the current signal source.

to mute sound, press this button

) button in TV mode

In TV mode the unit will automatically go

Teletext operations (option)

Select a TV channel in order to pick up
the picture signal of Teletext. Teletext button
functions are as follows:

TEXT ( ): Press this button to enter into
TEXT mode. Press this button again to enter
mixed mode. Press the button again to return
to the channel you are watching.

HOLD ( ): Press this button to stop the
move to the next page. Press this button again
to cancel operation.

INDEX ( ): Press this button to go to the
index page.

SIZE ( ): Press this button to enlarge the
top part of the page. Press this button again to
enlarge the bottom part of the page. Press this
button third time to normal size text page view.

REVEAL ( ): Press this button to reveal the
cancelled information. Press this button again
to cancel the information.

SUBPAGE ( ): Press this button to select
sub-page. Input the number of sub-page and
use numeric buttons in the format 0001 for
sub page 1. The teletext will search for the sub
page. Press SUBPAGE button again to exit the
subpage mode.

CANCEL ( ): Press this button to exit from
the teletext mode.

E/W: Press this button to switch between
available teletext languages.

Red/Green/Yellow/Blue buttons: Press
these 4 color buttons to access directly to
corresponding color page displayed at the
lower parts of teletext screen.

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the
RC or VOL+/- buttons on the panel to select
setting page.

3. Press DOWN cursor button on the RC or
CH- button on the panel to go to the parameter
list.

8 9

4. Press UP/DOWN cursor buttons on the
RC or CH+/- buttons on the panel to select a
parameter to adjust.

5. Press cursor buttons on the RC or VOL+/­or CH+/- buttons on the panel to adjust the
selected parameter.

6. Press MENU button to return to the
previous menu page. Press EXIT button on the
RC to quit the menu.

Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.

Channel setting

CHANNEL

Auto Tuning
Color system
Sound system
Manual Tuning
Programme Edit

Exit

Enter

• Auto tuning: press ENTER buttons to

start automatic search and saving of available
TV channels.

• Color system: select PAL/SECAM/NTSC/

Auto.

• Sound system: select BG/DK/I/M.

• Manual tuning: you can manuall tune and

arrange TV channels in whatever order you
need.

• Program Edit: this item allows you to sort

TV programs according to your preferences.
Enter into program edit menu:

Delete: Select the channel you want to delete.

Press red button to delete the channel.

Rename: Highlight the needed channel.
Press green button; then press UP/DOWN
buttons to select a symbol. Press LEFT/RIGHT
buttons to select the next symbol. Press green

button to confirm.

Move: Highlight the needed channel. Press
yellow button; select the position to put the
channel into. Press yellow button to confirm.

Skip: Highlight the needed channel. Press
blue button; now this channel will be skipped
when you select previous/next channels.

Favorite: Select the channel you want to edit.
If this channel is your favorite channel, you can
add the mark to the channel as your favorite
channel by pressing button.

Picture setting

PICTURE

Picture Mode
Color Temp
Aspect Ratio
DNR
Screen

Exit

Enter

• Picture Mode: Vivid/Standard/Soft/User.

When User mode is selected, you can adjust
contrast, brightness, saturation, sharpness and
tint (in NTSC) of the image.

• Color Temperature: Normal/Warm/User/

Cool.

• Aspect ratio: Set the picture format:

4:3/14:9/16:9/Zoom1/Zoom2.

• DNR: Dynamic noise reduction effect for

reducing the video noise level.

• Screen (only in PC-RGB mode):

Auto adjust: automatical setting of the
parameters.

Horizontal Position: adjust horizontal position
of the image.

Vertical Position: adjust vertical position of
the image.

Size: adjust the image frequency manually.

Phase: adjust the phase manually.