Hyundai H-LCD901 Instruction Manual
ПЕРЕНОСНОЙ ЖК-ТЕЛЕВИЗОРPORTABLE LCD TV
Руководство пльзователя Instruction manual
H-LCD901
2 3
Instruction manual Instruction manual
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
Important safeguards
• Never attempt your own maintenance.
If something appears strange, please turn
the TV off and consult your TV dealer. The
TV is composed of many delicate electronic
components that can be damaged or broken if
you open the TV or attempt to modify it.
• Do not expose the TV to high humidity,
dust, steam, oil, smoke, direct sunlight etc.
• Do not use thinners or other chemical
reagent. Wipe the TV off with a soft cloth if it
gets dirty.
• Do not leave the TV in excessively hot or
cold places. Permissible storage temperatures
are within the range of –20°C to +60°C.
Permissible operation temperatures are within
the range of 0°С to +40°С.
• Only use specified adaptors and power
sources.
• Turn power OFF when not in use and
unplug the adaptor.
• Avoid dropping and strong impact.
• For your safety, the driver should not
watch TV or operate the controls while driving.
• Please note that watching and operating
the TV while driving are prohibited by law in
some countries.
• That don’t mean the TV is broken with
some light or dark color dots on the LCD,
it’s a popular condition with the TFT-LCD
technology.
Earphone operation precautions
• Please don’t tune your headphone/
earphone to a too high volume; otherwise it
may lead inconvenience and danger to yourself
and other people.
• For open-designed earphone, to avoid
influencing your periphery, please tune down
the volume.
• In case of any tinnitus, please tune down
the volume or stop using this machine.
• It is recommended by the aurists to never
use the earphone continuously for a long time.
Accessories
LCD TV
A/V cable
Antenna
Earphone
Car power adapter
Remote controller
Stand
Installation bracket
Power AC/DC adapter
Instruction manual
Warranty card
Consumer information
Control elements
Front panel
HLCD901
1 2 3 4 5 6 7
1. IR sensor
2. LCD display
3. VOL+/VOL- buttons
4. MENU button
5. POWER button
6. TV/AV button
7. CH+/CH- buttons
Back panel
1 2 3
1. AV in jack
2. Earphone jack
3. Power jack
Remote controller
POWER button
Volume up button
Mute button
TV/AV button
~ Number buttons
Channel+ button
Menu button
Volume down button
Channel- button
Mode button
Double digit button
Please align the RC with the infrared-
receiving window on TV set in operation.
• Never squeeze, drop, wet or disassembly
the RC.
• Never press any button continuously and
swiftly. Operation interval is at least 2 seconds.
4
Instruction manual
Battery installation
Insert the battery according to the picture
above, observing the correct polarities (+) and
(-). Use one Cr2025 size battery. If the RC fails
to work even operated near the unit, replace
the battery. Do not use rechargeable batteries.
Remove the battery when the RC will not be in
use for a long time.
Button functions
POWER/ button: Press this button to
turn on or off the unit.
MENU/
button: Press this button to
display the on-screen menu.
AV/TV /
button: Press this button to
switch between video sources.
MUTE/
button: Press this button, sound
disappears; press it again or press VOL+/VOLor
/ buttons to resume a normal sound.
When sound is muted, a corresponding symbol
appears on the display.
VOL-/VOL+
/ buttons: Press VOL-/
button, the volume of TV set decreases.
Press VOL+/
button, the volume of TV set
increases.
CH+/CH- /
/ buttons: Press CH+/
button, the number of TV channel increases.
Press CH-/
button, the number of TV
channel decreases.
Number buttons
~ and button:
When the channel is a one-digit figure, just
press the corresponding number button. If
the channel is a two-digit figure, you should
press
button first to show - - on the
display screen before further pressing the
corresponding number buttons.
MODE/
button: Press this button to
select picture mode.
Installation and connection
Stand installation:
Release the metal washer on the top of the
bracket but do not separate it from the bracket.
Insert the metal washer with the bracket into
a hollow at the back of the unit and move the
bracket up to a suitable height.
Tighten the screw 1 up on the bracket to fix
the stand with the unit.
Control the screen angle with the lateral
screw.
Screw the stand to the bracket.
Connection of the antenna:
Plug the antenna into the Antenna jack
situated on the rear panel of the unit.
Connection of headphone:
Connect the headphone to the headphone
jack for private listening. The speakers will not
operate when headphones are connected.
Connection to power source:
Connect one round end of attached AC/DC
adaptor or car adaptor to the power source
input jack and the other end to the wall outlet
at the suitable voltage. When in house, use the
AC/DC adaptor; for car use, connect with the
car adaptor (adaptors included should be only
used). Press POWER/
button to turn on
the unit.
AV input connection
Connect the AV cable as showed in the
picture below. After connection, switch the unit
to the AV mode.
5
Instruction manual
Menu operation
AV Mode
Press MENU or button to access setting
menu for picture, audio and function.
Press CH+/CH- buttons or
/ buttons
to choose the parameter you need to adjust.
Then press VOL+/VOL- buttons or
/ to
adjust the parameter.
PICTURE
BRIGHT
CONTRAST
COLOR
AUDIO
VOLUME
FUNCTION
SIGNAL
SLEEP
LANGUAGE
ZOOM
FUNCTION: Signal is for selecting AV
or TV signal; Sleep is for choosing the period
(in minutes) until the automatic turning off;
is for changing vertical position of the
image; Zoom is for changing the screen size;
Language is for selecting the on-screen menu
language.
TV Mode
Press MENU or button to access setting
menu for picture, audio, TV and function.
Press CH+/CH- buttons or
/ buttons
to choose the parameter you need to adjust.
Then press VOL+/VOL- buttons or
/ to
adjust the parameter.
Loading...