Hyundai H-LCD3210 Instruction Manual

H-LCD3210

LCD TV

ЦВЕТНОГО ИЗОБРАЖЕНИЯ

ТЕЛЕВИЗОР

ЖИДКОКРИСТАЛЛИЧЕСКИЙ

(LCD)

Руководство по эксплуатации Instruction manual

Table of contents Before you start

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future.

Table of contents Before you start

Utilization of the product Important safeguards

Installation and connection

Installation

Stand installation Wall mounting

Connection

Outdoor antenna connection Other connections

Operation

Control elements

Front panel

Back panel Remote controller

Changing the battery

General operations

AV signal sources

Teletext operations

PC screen OSD operation

Picture setup Audio setup Miscellaneous setup TV setup PC setup

USB operation

Audio file playback Photo file playback

General information

Troubleshooting

Causes of interference Accessories Specifications

2 3 3 3 5 5 5 5 6 6 6 7 7 7 7 8 8 9 9 9

9 10 10 10 10 11 12 12 12 12 13 13 13 14 14

2 3

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so, you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health.

Important safeguards

• Before connecting the AC power cord to the outlet, make sure that the voltage designation of the unit corresponds to the local electrical supply.

• Please unplug the power cord from the AC outlet and contact a service center for repair if following occurs: any obvious abnormality appears in the unit, such as smoky, peculiar smell or strange sound; liquid has been spilled or other objects have fallen into the unit; no picture or sound; cover or panel is broken; although you have operated the unit following the operating instructions, it still cannot work normally.

• This unit should only be connected to a wall socket having grounding.

• Always disconnect the power cord and antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the unit is unused for long periods of time.

• When unplugging the plug, always hold the wide slot, do not touch the metal part, and do not destroy, refit, twist, pull or roast the power cord.

• Please contact the service center immediately if you found that the core is showed in the air or has been broken.

• Please replace the AC outlet if the metal

bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of nondesignated capacity may cause the fire due to the generation of heat.

• All instructions must be read and understood well before you operate the unit. Heed all warnings and follow all instructions.

• Please use the accessories provided by the manufacturer. Using inadequate accessories may result in accidents.

• Please adjust the product through the panel buttons or the remote controller, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.

• Over-press the panel may destroy the product.

• Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product.

• Please place the product on a flat surface in a well-ventilated location. Keep it away from

Before you start

the burning-light, direct sunlight, vibration, high-temperature and humidity. Store the product with a temperature from –200C ~500C; otherwise you may destroy the product.

• Do not place any vase, potted plant, cup, medicine and any container with water on this product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.

• Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.

• Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.

• Do not place the unit into closed space of TV for better ventilation; it can reduce the product lifetime. Keep a space at list 10cm at above, left, and right of the TV.

• Please place all the signal cords behind of rear panel.

• Do not overexert or touch the panel when you convey the product. Do not transfer the LCD TV up or down display direction.

• Do not transport it with the power cord or the connection cable connected. If you move this product with the power cord or the connection cable connected, the damaged power cord, connection cable or connection terminal may cause the fire, the electric shock or breakdown.

• 2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it may damage it.

• The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates that heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.

All images provided herein are schematic drawings of real objects and may differ from their real images.

Installation and connection

Installation

Stand installation

Fix the support to the stand by screws (3 pieces A-type screws 4x14 mm) as shown in the picture:

Fix the finished stand assembly to the unit by screws (4 pieces B-type screws) as shown in the picture:

Wall mounting

Fix the support to the unit by screws (4

pieces B-type screws) as shown in the picture:

Use 4 screws to fix the unit on the wall mount bracket. Please find there are 4 holes on the back of the unit:

Installation and connection

Connection

Antenna cable connector

75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω impedance converter to plug in antenna input terminal on the rear of the cabinet.

Other connections

• Connect the audio sources (Including DVD, VCDR, CAMCORDER and PC) to the proper AUDIO input jacks ‘L’ and ‘R’.

• Connect the video source to the VIDEO jack by RCA cable.

• If the video source has a SCART output jack, you can connect the signal to the monitor by the SCART cable.

• Connect the video source to the S-VIDEO input jack of the monitor by the S-video cable (provided that the video source has S-video output jack).

• When using the LCD as a computer

TVRF antenna jack

screen, connect the PC to the VGA jack from the monitor by the relevant cable.

• AC power input is intended for connecting

the unit power cord to current supply mains.

• This unit has PC audio in jack. Connect this jack to PC main unit with related audio cable in PC mode and adjust the volume to what you want.

• Component input YPbPr is intended for receiving component video signal if connected to the component output of external source.

• Connect your headphones or earphones (not included) to the headphone socket of this unit. When earphones are connected, the sound output through the built-in speakers of this unit is mute.

• If the video source has a HDMI output jack, you can connect the signal to the monitor by the HDMI cable.

Operation

Control elements

Front panel

Back panel

1. INPUT button

2. CH+/UP button

3. CH-/DOWN button

4. VOL+/RIGHT button

5. VOL-/LEFT button

6. MENU button

7. USB jack

8. HDMI 1 input

9. HDMI 2 input

10. HDMI 3 input

11. PC VGA input

12. SCART connector

13. S-Video input

14. Composite video input

15. Y /Pb/Pr component input

16. Stereo audio input (L+R)

17. PC audio input

18. Earphone output

19. RF antenna input

20. AC power input

1. Remote control sensor

2. Power button and indicator

13 14

Operation Operation

/SIZE button

Remote controller (RC)

3 4

8 9

10 11

12 13

14 15 16 17

1. POWER button

2. Number buttons

3. Zzz button

4. ASPECT button

5. VOL+/VOL- buttons

6. DISPLAY button

7. ENTER button/cursor buttons ( / / / )

8. MENU button

9. P.MODE button

10. INPUT button

11. /HOLD button

12. /TEXT button

13. /INDEX button

21 22

24 25 26 27

28 29

30 31

32 33 34

14.

15. FAV button

16. FAV- button

17. Red button

18. Green button

19. AUTO button

20. MUTE button

button

21.

22. NICAM button

23. CH+/CH- buttons

24. EXIT button

25. S.MODE button

26. ROOT button

/REVEAL button

27.

/SUBPAGE button

28.

29. A-B button

30. REPEAT button

31. GOTO button

32. FAV+ button

33. Cyan button

34. Yellow button

Changing the battery

1. Remove the battery compartment cover on the back of the RC.

2. Insert the batteries into the battery compartment making sure that the correct polarity is observed.

3. Install the cover back.

• Use two AAA batteries for the RC. The RC should be pointed at the IR-sensor within 8 meters and within 30 degrees at the left or the right side.

• Take the battery out of the RC if it is not used for a long time. Do not mix new and used batteries or different types of batteries. Weak batteries can leak and severely damage the RC.

• Do not expose the RC to shock, liquids, and do not place it in an area with high humidity.

8 9

General operations

• Press POWER button on the unit or on the RC to switch on the power, the indication light will be in blue color. Press POWER button again to switch off the power, and the light will be in red color.

• The picture setup, sound setup, previous channel can be memorized before you switch off the unit. The unit will restart under the previous state when you switch on it again.

• Press VOL- button repeatedly to decrease the volume; press VOL+ button repeatedly to increase the volume from 0 to 100.

• Press Zzz button repeatedly to set the sleep time: Off => 30Min => 60Min => 90Min => 120Min.

• Press INPUT button on the RC to select the TV function mode. Channel ‘1’ will appear on the right top corner after channel searching is completed. Press CH-/CH+ buttons to select previous or next channels; or press number buttons to enter a channel number from 1 to 200 directly.

• Press button on the RC to select from the present channel and the previously displayed channel.

• Press P.MODE button repeatedly to cycle through the available video picture modes from the following 5 types: Standard => Vivid => Hi-bright => User => Cinema.

• Press S.MODE button repeatedly to cycle through the available sound modes from the following 8 types: Rock => Pop => Live => Dance => Techno => Classic => Soft => Off.

• Press MUTE button to cut off sound, press this button again or adjust volume to resume sound.

• Press DISPLAY button to display the preset TV channel play information.

• Press ASPECT button repeatedly to select a screen display size from the available list: Full => ZOOM => 16:9 => 4:3 => Auto.

Available aspects may differ for different

signal sources.

AV signal sources

Press INPUT button on the RC, then press

/ cursor buttons to cycle through the available source list as follows: TV - AV S-Video - SCART - YPbPr - HDMI1 - HDMI2

- HDMI3 - VGA - Multimedia. Press ENTER cursor button to confirm.

TELETEXT operations (option)

Press INPUT to select the TV mode. Then press CH-/CH+ buttons to select TV channel in order to pick up the picture signal of TELETEXT. Teletext button functions are as follows:

TEXT: Press TEXT button to enter into TEXT mode. Press this button again to return to the channel you are watching.

HOLD: Press this button to stop the move to the next page, and the hold symbol will appear in the top left hand corner of the screen. Press this button again to cancel operation.

INDEX: Press this button to go to the index page.

SIZE: Press this button to enlarge the text shown on the teletext screen, and one half of page could be shown. Press this button again to view the second half of this page. Press this button third time to normal size text page view.

REVEAL: Press this button to reveal the cancelled information. Press this button again to cancel the information.

SUBPAGE: Press this button to select sub page, and the sub-page symbol will appear in the left top hand corner of the screen. Enter the number of sub page and use numeric buttons in the format 0001 for sub page 1. The teletext will search for the sub page.

Red/Green/Yellow/Blue buttons: Press these 4 color buttons to access directly to corresponding color page displayed at the lower parts of teletext screen.

PC screen

Select the VGA input (TV into PC) mode. The unit has a VGA jack for a normal computer. Connect the monitor with a PC by this jack and the unit can be used as the monitor for the PC.

+ 20 hidden pages