Hyundai H-LCD2008 Instruction Manual

H-LCD2008

LCD TV

LCD

Instruction manual

Table of contents

Table of contents.........................................................................................................................................................	2
Important safety precautions........................................................................................................................................	3
General introduction....................................................................................................................................................	5
Accessories .................................................................................................................................................................	5
Controls and connection ..............................................................................................................................................	6
Remote control (RC) ...................................................................................................................................................	8
Operations .................................................................................................................................................................	10
OSD operations..........................................................................................................................................................	12
Troubleshooting .........................................................................................................................................................	16
The causes of interference ..........................................................................................................................................	17
Specifications.............................................................................................................................................................	18

Thank you very much for buying our product – the most natural Colour Television Receiver.

To enjoy your set to the full from the very beginning, read this manual carefully and keep it for future reference.

2

Important safety precautions

Warning

Please unplug the power cord from the AC outlet and contact our service personnel to repair under the following conditions:

Any obvious abnormality appears in the product, such as smoky, peculiar smell or strange sound.

When a liquid has been spilled or other objects have fallen into the product.

No picture or sound.

Cover or panel is broken.

Although you have operated the product by following the operating instructions, it still cannot work normally.

Warning

Be careful about the power cord or the plug to avoid the fire or the electric shock.

Always disconnect the power cord and antenna during the storm.

Do not fix the power cord with the metal nail.

Unplug the power cord from the AC outlet; also unplug the signal cables from the input ports when the product is unused for long periods of time or during a lightning storm.

When unplug the plug, always hold the wide slot, do not touch the metal part, and do not destroy, refit, twist, pull or roast the power cord.

Please contact the personnel service immediately if you found that the core is showed in the air or is been broken.

Please replace the AC outlet if the metal bolt cannot be inserted into the power socket completely or it cannot be fastened even when it was pushed in, otherwise, any accidents of shocks and fires would happen.

Never touch the antenna lie or power plug if it stars to thunder.

Do not touch the power plug with wet hands.

Do not use any non-rated power socket with numerous devices jointed on one power socket or cable device. The wire of non-designated capacity may cause the fire due to the generation of heat.

Instructions

All instructions must be read and understood well before you operating this product. Heed all warnings and follow all instructions.

Attachments

Please use the attachment recommended by the manufacturer. Use the inadequate attachments may result in accidents.

Adjustment

Please adjust the product through the panel buttons or the remote control, do not remove the cover or attempt to service the product by yourself. Do not disassemble back cover and do not make maintenance by yourself to avoid the electric shock.

Caution: Over-press the panel may destroy the product.

Placement

Do not place the product on an unstable cart, stand surface, tripod, bracket, or table. The product may fall, causing serious accidents as well as the damage to the product.

3

Please place the product on a flat surface in a well-ventilated location. Keep it away from the

burning-light, direct sunlight, vibration, high-temperature and humidity. Store the product with a temperature from –200C ~500C; Otherwise you may destroy the product.

Do not place any vase, potted plant, cup, medicine and any container with water on this product. If the liquid is spilt, it may cause the fire, electric shock or breakdown.

Do not install it at the place on the strong magnetic field or current field. It may cause break down. This equipment may be observed deterioration of the picture by electromagnetic radiation in electromagnetic environment.

Fasten the wheel of the product or shelf with wheels when installing this product. If it moves or is tipped over, it may be damaged.

Do not place any fire source such as candlelight close to this product or place it on this product. If it is tipped over or fallen down, it may cause damage or fire.

Caution: Do not place the LCD TV into closed space of TV for better ventilation; it can reduce the product lifetime. Keep a space at list 10cm at above, left, and right of the TV.

Remote control

Do not expose the remote control to shock, liquids, and do not place it in an area with high humidity. Please use the qualified batteries and do not mix batteries with different types.

Do not mix old and new batteries, and do not place the batteries to burn or disassemble them. If the remote control is unused for an extend period of time, remove batteries from the remote control.

Cords

Please place all the signal cords behind of rear panel.

Cleaning

Unplug the power cord from the AC outlet before cleaning the product. Do not use liquid cleaners or aerosol cleaners and others; use the special LCD Panel cleaners. Keep the power off before LCD panel dry completely.

Clean the dust on the power plug periodically.

Caution: Do not use volatile cleaner or you may damage the LCD Panel/Covers.

Transportation

Do not overexert or touch the panel when you convey the product. Do not transfer the LCD TV up or down display direction.

Do not transport it with the power cord or the connection cable connected. If you move this product with the power cord or the connection cable connected, the damaged power cord, connection cable or connection terminal may cause the fire, the electric shock or breakdown.

2 persons or more shall transport the device, which is heavier than 18 kg. If you drop or tip over the device, it may damage it.

Other objects

To ensure not to get an electric shock or short circuit, please do not spill liquid or other objects into the ventilation holes of the product.

Caution: Do not stand on the LCD TV, do not push LCD TV or its’ stand. Keep it away from children.

Heating

The temperature of the product’s body becomes a little higher after a long period use. This phenomenon indicates about heat exchange in normal working mode, thus please do not let children or anyone who is sensitive of temperature to touch.

Note: All the OSD and illustrations in this manual may be somewhat different from the actual situation. Please take the LCD Color TV menu as the standard.

4

General introduction

Size of the screen 20"/51 cm

Aspect ratio 4:3

Screen resolution: 800x600

Brightness: 450 cd/m2

Contrast: 500:1

Wide viewing angle 160º/140º

Response time: 16 ms

Color systems: PAL, SECAM, NTSC

Digital comb filter

Convenient OSD menu in Russian and English languages

Connections: RF antenna, S-Video, Composite, SCART, Component, headphones out, VGA

Wide range power supply: 110 – 240 V, 50/60Hz

Accessories

Note: Please keep the wrapping box and the padding well for future convenient use when you convey them.

Please check the accessories. If anything is missed address to the seller.

LCD TV

DC adapter

AC Power cord

Remote control (RC)

Instruction manual

Consumer information

Warranty card

5

Controls and connection

Place your LCD TV on a flat surface in a well-ventilated location.

Front panel

Top panel button description

	Button	Description
1	MENU	Open the menu or switch among the menus.
2	TV/AV	To switch among the signal source.
3	VOL-/+	Decrease/increase the sound volume. Adjust functions in menu operation.
4	P-/+	In TV mode, decrease/increase channel number. Select functions in menu operation.
5	Indicator	Indicates the TV state
6	POWER	Enter or leave the standby mode.
7	Sensor	Remote sensor for RC

6

Rear panel terminals and controls

		Items	Connection description
			Connect the DC 12V power cable with DC adapter, which should be
	8	DC input	connected to AC power supply. Connect the other end of the DC
			power cable with the DC power port on the TV.
	9	Headphone jack	Connect the headphones to this jack
	10	RF antenna	The RF output terminal can be connected with the RF input port of
			the TV.
	11	S-Video	The output S-Video terminal of DVD can be connected with the S-
			Video input port of the TV through S-Video cable.
			The product can receive different signals (the programs send by TV
	12	Composite video input	station) and transfer these signals through AV signal cable to other
		Audio input	audio and video equipments. The AV output of the TV can be con-
			nected with the input port of other AV equipment through AV cable.
	13	SCART	Connect DVD video player or other device via SCART cable
			It’s convenient to receive the component video signal of high defini-
	14	Component video input	tion from DVD player. The output Component (YPbPr) terminal of
			DVD can be connected with the Component (YPbPr) input port of the
			TV through AV cable.
	15	VGA (PC) input	Connect VGA cable to the PC

Notes:

Ensure that the power to the LCD TV and other connected devices is off before you make any connections.

Check and make sure that all AV cables are connected with the corresponding ports correctly.

7

Remote control (RC)

1.POWER button

2.Digit buttons

3.Switch program button

4.SCAN button

5.V-/+ button

6.OK button

7.MENU button

8.P button

9.S button

10.TV/AV button

11.PREVIOUS CHANNEL button

12.P-/+ button

13.SURROUND button

14.Cursor buttons

15.MUTE button

16.CALL button

17.SLEEP button

8

Insert the batteries

Remove the battery cover by pressing the symbol and pulling the cover space in the direction of the arrow.

Insert the two 1.5V (AAA size) batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit.

Replace the battery cover by sliding it in until you hear a click sound.

Note: If the RC doesn’t react to pressing the buttons or the working range was decreased insert the new batteries.

Use of RC

Use the RC by pointing it towards the RC sensor of the set. Objects between the RC and sensor may prevent proper operation.

Note: The illustration is for your reference only; the remote sensor may locate differently with different model.

Cautions regarding use of RC

Do not expose the RC to liquids, and do not place in an area with high humidity.

Do not install or place the RC under direct sunlight. The heat may cause deformation of the unit.

The RC may not work properly if the remote sensor of the main unit is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or LCD TV set, or operate the RC closer to the remote sensor.

TV installation

Connect antenna or video facility

Use 75 Ohm coaxial cable plug or 300-75 Ohm impedance converter to plug in antenna input terminal on the rear of the cabinet.

9

Operations

Standby

Press POWER button to turn on or off.

TV/AV

Press TV/AV button, signal source changes as following: TV => AV => SVHS => SCART => YpbPr => PC => TV. By long pressing this button you will select menu as followed you can select which source you need quickly.

Digit buttons

Directly press the number buttons to switch to the relevant program, according to the current program digits. The selecting range of the programs is 0~199.

Switch program button

Each time after selecting a program, it will automatically turn back to one digit mode, and press [-/--] to choose two or three digits before pressing number keys [0]~[9]: the program digits will changed as follows: -- >, 1-- >.

In the state of two digits entering, the program will come back to the present one, only when the second number is not entered within 3 seconds after the first number's entering. While in three digits entering, the first digit will automatically be 1, and the program will come back to the present one, only when the third number is not entered within 3 seconds after the second number's entering.

Previous channel

Jump back to the previous program.

Mute

Pressing this button, the audio can be muted, press again, the audio will be on.

Call

Show present mode.

No.1. The number is the program number. No.2. It is the state of the c hild lock . No.3. The 03:03 is the current time. No.4. The OFF TIME is the auto off time. No.5. The SLEEP is the time that how long the TV will auto off.

OK

Picture mode Setup [OK]:

Press this button in TV mode, to enter picture menu: BRIGHTNESS => CONTRAST => COLOUR => SHARPNESS. You can change the value with LEFT/RIGHT cursor buttons or V-/+ button.

10

Picture mode setup

Press P button repeatedly, then picture will change as follows: USER =>DYNAMIC => STANDARD => MILD.

Sound mode setup

Press S button repeatedly, the sound mode will be changed as follows: USER => MUSIC => SPEECH => MOVIE.

MENU

Press this button to enter/quit menu.

SLEEP

Press SLEEP button, to choose auto turn-off time from 5 to 120 minutes or choose to turn off the sleep function and quit sleep menu.

P-/+

Press these buttons to switch the program number in turn when, and choose program, and switch items in menu. (as UP/DOWN button)

V-/+

Press these buttons to increase the volume level. Choose menu value. (as LEFT/RIGHT button).

SCAN

Press SCAN button to start scanning the following programs, channels starting from the current watching one. When the scanning of all channels is finished, it will go back to the previous watching channel. Press any button on the remote will stop this scan function.

Surround

Press SURROUND button to activate function of surround sound. Press one more time to deactivate it.

11